微穿孔板吸声结构水下应用研究

马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。     

穿纤维微穿孔板吸声系数的有限元仿真

为拓宽微穿孔板的吸声频带,该文用有限元算法建立了典型微穿孔板和穿入不同数量金属纤维的微穿孔板模型,研究了两种微穿孔板的吸声系数、声阻抗和微孔内法向质点速度的空间分布,并进行了试验验证。有限元仿真和试验数据表明:穿入金属纤维可以拓宽微穿孔板的吸声频带,吸声系数也随纤维根数的增加而下降;吸声系数仿真结果与试验结果趋势一致,仿真模型可以有效模拟穿入纤维前后微穿孔板的吸声特性;穿入金属纤维导致黏滞效应引起的低质点速度区域增大,声阻增加,引起吸声系数的降低,而声抗变化不大。研究发现,有限元仿真方法适用于结构相对复杂的微穿孔结构的声学建模,能直观地体现微孔复杂结构的影响,值得继续深入研究和工程应用。     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

微穿孔板和微缝板吸声体研究进展

介绍了我国在新型吸声体微穿孔板和微缝板的特点、首创、理论分析、加工制作、多方面的应用情况，以及其在国外的影响。也讨论了这些吸声体的部分发展方向。     

关于微穿孔板吸声体频带宽度极限的讨论

依据马大猷教授的微穿孔板吸声体准确理论,利用计算机辅助设计对于该结构频带宽度极限情况从理论上进行了讨论,把极限频宽和最大吸声系数的制约关系量化,并得到此情况下应用于低频或高频环境孔径的选用范围,以及此情况下板厚和穿孔率与传统观念不同的特点。以上分析结果以及所提供的结构参数为宽频带微穿孔板的具体设计提供有价值的参考。     

计及孔间相互作用的微穿孔板吸声特性研究

计算微穿孔板吸声系数时,假设孔间的相互作用可以忽略。计算具有不同直径微孔的穿孔板吸声系数并提高其计算精度,孔间的相互作用不能再忽略。在马大猷、Melling(梅尔林)等前人研究的基础上,根据声波辐射和传播原理,分析微孔之间的相互作用,通过修正微孔的实际等效长度,得到计及孔间相互作用微孔板吸声系数模型,并进行理论计算和实验测试。研究结果表明:影响微穿孔板吸声系数除结构参数外,还应考虑孔间的相互作用;计及微孔板各孔间相互作用,能提高共振频率、吸声系数理论值的计算精度,计算值逼近实验测试结果。     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000] Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果;弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。     

穿孔率和穿孔直径耦合下微穿孔板吸声体整体吸声性能

微穿孔板几何参数的耦合性及其对整体吸声性能的影响,对于设计微穿孔板吸声体和优化其工作性能具有指导作用。根据微穿孔板吸声体基本理论,研究了穿孔率和穿孔直径双参数耦合作用下微穿孔板吸声体的整体吸声性能。穿孔率和穿孔直径之间的耦合性与其本身取值密切相关,而与板厚和板后腔深无明显关系;在穿孔率-穿孔直径参数域上,吸声体存在吸声系数为1.0的吸收峰,整体吸声性能随穿孔率或穿孔直径从小到大变化,呈现出先增强后减弱的变化趋势。该结论能够准确解释微穿孔板受粉尘污染后吸声性能的变化规律和演变路径。论文的工作为设计微穿孔板吸声体提供了一种新的理论依据和实施方法。     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

阻尼耦合双层微穿孔板吸声体研究

提出并研究一种利用两板间微缝进行阻尼耦合的双层微穿孔板(DMPP)吸声体。该吸声体在两层微穿孔板(MPP)之间形成一个宽度小于1mm的微缝,因此其阻尼不仅可由板上的微穿孔提供,还可由两板之间形成的微缝提供。采用声电类比法建立了DMPP转移阻抗的理论模型,并进行实验验证,结果表明理论计算结果与实验吻合较好。然后利用建立的理论模型,对单层MPP和DMPP吸声体的吸声性能进行了对比研究,结果表明,相比于单层MPP,DMPP可以利用微缝提供的阻尼显著改善吸声性能,同时减少实际板厚。最后,对DMPP吸声体的吸声性能及其几何参数的关系进行研究,结果表明,当保持其它结构参数不变时,微缝宽度对DMPP吸声系数的提高存在一个最优值,超过或低于此值会导致吸声系数下降。     

水介质管路弹性背腔微穿孔消声器的传递损失特性

为抑制水介质管路系统低频噪声,兼顾结构的紧凑性,提出弹性背腔微穿孔管路消声结构,弹性管壁为橡胶帘线复合材料,并推导了传递损失的数值解法。首先,基于Biot-Allard多孔弹性理论,将弹性微穿孔板等效为弹性多孔材料;然后,利用双尺度法建立帘布的周期性代表单元,求得其刚度矩阵;接着,基于分层理论,建立弹性管壁的多层复合材料模型,并与内部声场耦合计算,得到弹性背腔微穿孔管路消声器的传递损失。在水介质驻波管中,利用双声源法测量弹性背腔微穿孔管路消声器样机的传递损失曲线,并与扩张式管路消声器和刚性背腔微穿孔管路消声器进行对比,理论结果与试验结果吻合良好。研究表明,弹性背腔微穿孔管路消声器属于反射耗散复合式消声器,具有低频域、宽频带的消声特性。样机B2在40~300 Hz和40~1200 Hz频段内的传递损失分别为36 dB和30 dB,而相同尺寸扩张式消声器在对应频段的传递损失分别为7 dB和11 dB。     

Experimental investigation of holes interaction effect on the sound absorption coefficient of micro-perforated panels under high and medium sound levels

This paper experimentally investigates the holes interaction effect on the sound absorption coefficient of micro-perforated panels under high and medium sound levels. The theoretical formulations are based on a semi-empirical approach and the use of Fok’s function to model the acoustic surface impedance. For the high sound level regime, an empirical power law involving three coefficients is adapted. It is shown theoretically and experimentally that these coefficients can lead to optimized absorption performance and particularly, a formula relating the critical Reynolds number (Reynolds number value after which the absorption coefficient decreases with the increase of sound level) and the center-to-center distance between the perforations is derived. It is demonstrated that the first coefficient of the nonlinear acoustic resistance strongly depends on the separation distance between the apertures and decreases with a decrease of this latter distance. Analysis of the data reveals the fact that even with Holes Interaction Effect (HIE), the nonlinear reactance dependence on velocity is still very low compared to the resistance-velocity dependence. Four perforated panels of 1.5 mm thickness with different separation distances between the holes (from widely to closely separation) were built and tested. Experimental results performed with an impedance tube are compared with the described model for HIE. To test the dependence of the coefficients on frequency, the experiments are carried out for two different excitation frequencies (292 Hz and 506 Hz). The results can be used for designing optimal perforated panels for ducts, silencers and for the automotive industry.     

Improvement of sound absorption characteristics under low frequency for micro-perforated panel absorbers using super-aligned carbon nanotube arrays

Super-aligned carbon nanotube (SACNT) arrays are grown on the surface of micro perforated panel (MPP) in the hope of improving the acoustic performance of MPP absorbers by virtue of their unique properties. Scanning electron microscopy reveals that SACNT arrays did not block the perforations of MPPs or changed the perforation diameter due to their “super-aligned” nature, although MPPs are thickened. The absorption effect of SACNT arrays which are of the same and different lengths with different incident side on MPP absorbers are investigated, and standing wave tube method is used to determine the normal sound absorption coefficient. Results show that both of the lengths of SACNT arrays and the incident side have effects on the sound absorption performance of MPP absorbers. And generally SACNT arrays help to improve the sound absorption capacity of MPP absorbers in low-frequency regions only when the SACNT arrays surface is the incident side. SACNT arrays decrease absorption performance of MPP absorbers when the MPP surface is used as the incident side. Moreover, SACNT arrays are found to increase the acoustic ability of MPP absorbers with the same structure parameters monotonically at lengths up to 600 μm in the condition that the SACNT arrays surface is used as the incident side.     

Hybrid device for acoustic noise reduction and energy harvesting based on a silicon micro-perforated panel structure

A kind of hybrid device for acoustic noise reduction and vibration energy harvesting based on the silicon micro- perforated panel （MPP） resonant structure is investigated in the article. The critical parts of the device include MPP and energy harvesting membranes. They are all fabricated by means of silicon micro-electro-mechanical systems （MEMS） tech- nology. The silicon MPP has dense and accurate micro-holes. This noise reduction structure has the advantages of wide band and higher absorption coefficients. The vibration energy harvesting part is formed by square piezoelectric membranes arranged in rows. ZnO material is used as it has a good compatibility with the fabrication process. The MPP, piezo- electric membranes, and metal bracket are assembled into a hybrid device with multifunctions. The device exhibits good performances of acoustic noise absorption and acoustic-electric conversion. Its maximum open circuit voltage achieves 69.41 mV.     

水下三弹性柱壳耦合声散射特性研究

为研究3个并排无限长弹性圆柱壳受垂直于柱轴方向的平面声波作用的声散射特性,采用Fourier级数展开法建立了圆柱壳声散射数学物理模型,考虑了三圆柱壳弹性振动声辐射和刚性声散射,建立了3个壳体辐射声场和刚性散射声场的耦合作用关系,比对了等效散射强度的刚性散射分量与弹性散射分量,并分析了三壳体等效散射强度特性。计算结果表明:当ka₂>40,在频率f=3000 Hz以上频段,弹性分量对等效散射强度变化趋势的贡献可以忽略。当ka₂>30,在频率f=2400 Hz以上频段,弹性散射分量对等效散射强度影响不超过3 dB;三壳与单壳的等效散射强度在0°入射角方位相当,其它方位三壳体等效散射强度明显大于单壳体。本文的理论公式可推广到任意数量阻抗柱的声透射和声反射问题。