HCN Adsorption on the Fe(100), Fe(111) and Fe(110) Surfaces: a Density Functional Theory Study

Twenty kinds of adsorptions of HCN on the Fe(100), Fe(111) and Fe(110) surfaces at the 1/4 monolayer coverage are found using the density functional theory. For Fe(100), the adsorption energy of the most stable configuration where the HCN locates at the fourfold site with the C-N bonded to four Fe atoms is 1.928 eV. The most favored adsorption structure for HCN on Fe(111) is f-η3(N)-h-η3(C), in which the C-N bond is almost parallel to the surface, and the adsorption energy is 1.347 eV. On Fe(110), the adsorption energy in the most stable configuration in which HCN locates at the two long-bridge sites is 1.777 eV. The adsorption energy of the parallel orientation for HCN is larger than that of the perpendicular configuration. The binding mechanism of HCN on the Fe(100), Fe(111) and Fe(110) surfaces is also analyzed by Mulliken charge population and the density of states in HCN. The result indicates that the configurations in which the adsorbed HCN becomes the non-linear are beneficial to the formation of the addition reaction for hydrogen. The nature that the introduction of Fe into the catalyst could increase the catalytic activity of the bimetallic catalyst in the addition reaction of hydrogen for nitriles is revealed.     

Adsorption and Vibration of O Atoms on Fe Low-index and Fe （211） High-index Surfaces

IntroductionThe interaction of oxygen with iron in lowcoverageregimes is considered to be an important step in the for-mation of oxides in corrosion science and in Fisher-Tro-psch process for the synthesis of ammonia over the het-erogeneous catalysts[1]. …     

Vibration Spectroscopy Study of Phenylphosphonate at the Water–Aluminum (Hydr)Oxide Interface

Two previously published surface complexation models of phenylphosphonate on aged γ-Al₂O₃and boehmite (γ-AlOOH), respectively, have been examined by means of FTIR and FT-Raman spectroscopy. The spectral features of adsorbed phenylphosphonate were studied as a function of pH and total phenylphosphonate concentration. No evidence for a phase transformation into a three-dimensional aluminum phenylphosphonate phase was found. This suggested that phenylphosphonate is sorbed as surface complexes under the conditions used in this study. Both the infrared and the Raman data showed that the surface-bound phenylphosphonate ions undergo protonation reactions as pH is varied. These results together with the fact that the ligand has only two donor atoms for complexation and protonation led to the conclusion that a monodentate coordination to the surface is most likely in both systems. Overall, the spectroscopic results were in good qualitative agreement with the thermodynamic surface complexation models.     

氢原子在Fe低指数面及高指数面(211)上的吸附和振动

摘要应用原子和表面簇合物相互作用的5参数Morse势方法(5-MP)对H-Fe低指数表面体系及高指数表面体系进行了系统研究, 并获得了吸附位、 吸附几何、 结合能和正则振动频率等全部临界点特性. 理论计算结果表明, 在Fe(100)面, H原子吸附在四重洞位, H-Fe的垂直振动频率为1 009 cm^-1; 在Fe(110)和Fe(211)表面, 趋向于吸附在赝式三重位, H-Fe的垂直振动频率分别为1 054和1 046 cm^-1; 而在Fe(111)表面最稳定的吸附位是近桥位, 频率为1 030 cm^-1.     

Mechanisms of Arsenic Adsorption on Amorphous Oxides Evaluated Using Macroscopic Measurements, Vibrational Spectroscopy, and Surface Complexation Modeling

Arsenic adsorption on amorphous aluminum and iron oxides was investigated as a function of solution pH, solution ionic strength, and redox state. In this study in situ Raman and Fourier transform infrared (FTIR) spectroscopic methods were combined with sorption techniques, electrophoretic mobility measurements, and surface complexation modeling to study the interaction of As(III) and As(V) with amorphous oxide surfaces. The speciation of As(III) and As(V) in aqueous solution was examined using Raman and attenuated total reflectance (ATR)-FTIR methods as a function of solution pH. The position of the As-O stretching bands, for both As(III) and As(V), are strongly pH dependent. Assignment of the observed As-O bands and their shift in position with pH was confirmed using semiempirical molecular orbital calculations. Similar pH-dependent frequency shifts are observed in the vibrational bands of As species sorbed on amorphous Al and Fe oxides. The mechanisms of As sorption to these surfaces based on the spectroscopic, sorption, and electrophoretic mobility measurements are as follows: arsenate forms inner-sphere surface complexes on both amorphous Al and Fe oxide while arsenite forms both inner- and outer-sphere surface complexes on amorphous Fe oxide and outer-sphere surface complexes on amorphous Al oxide. These surface configurations were used to constrain the input parameters of the surface complexation models. Inclusion of microscopic and macroscopic experimental results is a powerful technique that maximizes chemical significance of the modeling approach. Copyright 2001 Academic Press.     

Tin– and Titanium–Oxygen Nanostructures on the Various Hydr(oxides) Surfaces

Tin– and titanium–oxygen nanostructures were synthesized by molecular layer-by-layer deposition from the gaseous phase onto various substrates (SnO₂, SiO₂, AlOOH) using (in the course of synthesis) hydroxyl and methoxy surface groups. The electrokinetic (electrokinetic potential, isoelectric point) and adsorption (adsorption of potential-determining ions, the point of zero charge) properties of prepared composites were studied as a function of pH of NaCl background solutions. Synthesis conditions that make it possible to obtain (on the boehmite substrate) nanostructures with electrosurface characteristics similar to the properties of corresponding bulk oxides were determined.     

基于第一性原理研究铱(111)和(100)表面的原子吸附（英文）

本文利用第一性原理密度泛函理论研究了九种不同的吸附原子在铱(Ir)的(111)和(100)表面上的吸附性质.探讨了Ir表面的功能化,因此吸附能、稳定的结构、态密度和磁矩,这将为进一步研究其在催化和其他表面应用中的可能展现的功能提供重要信息.研究表明,三/四重空位点是Ir(111)/(100)表面最有利的吸附位点.通过对大范围的覆盖率(从0.04到1个单层)的研究,表明吸附原子的吸附能具有很强的覆盖率依赖性.吸附能随着覆盖率的增加而增加,这意味着吸附物之间存在排斥相互作用.吸附原子和衬底电子态之间的强杂化会影响吸附性质,同时吸附原子的磁矩被抑制.通过Bader电荷分析,揭示了吸附原子和衬底之间的大量电荷转移.与(111)表面的结合相比,(100)表面吸附原子的结合更强.     

DFT Study of Thiophene Adsorption on the Pd（111） and Pt（111） Surfaces

Thiophene adsorption on the(111) surfaces of Pd and Pt have been investigated by density functional theory.The results indicate that the adsorption at the hollow sites is the most stable.To our interest,the molecular plane of thiophene ring is distorted with C=C bond being elongated to 1.450  and C-C bond being shortened to 1.347 ,and the C-H bonds tilt 13.91～44.05o away from this plane.Furthermore,analysis on population and density of states verified the calculated adsorption geometries.Finally,charge analysis suggests that thiophene molecule is an electron acceptor,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.     

A DFT Study of Thiophene Adsorption on the Rh（111） Surfaces

Thiophene adsorption on the Rh(111) surfaces has been investigated by density functional theory.The results show that the adsorption at the hollow and bridge sites is the most stable.The molecular plane of the thiophene ring is distorted,the C=C bond is stretched to 1.448  and the C-C bond is shortened to 1.390.The C-H bonds tilt 22～42oaway from the surface.The calculated adsorption geometries are in reasonable agreement with population analysis and density of states.The thiophene molecule obtains 0.74 electrons,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.The reaction paths and transition states for desulfurization of the molecule have been investigated.The bridge adsorption structure of thiophene leads to a thiol via an activated reaction with an energetic barrier of 0.30 eV.This second step is slightly difficult,and dissociation into a C4H4 fragment and a sulfur atom is possible,with an energetic barrier of 0.40 eV.     

氮原子在铁低指数面上的吸附位和吸附态

应用原子和表面簇合物相互作用的5参数Morse势方法(5-MP)对N-Fe低指数表面体系进行了系统的研究, 并获得了全部临界点特性, 如吸附位、吸附几何、结合能、正则振动频率等. 计算结果表明: 在Fe(100)面, N原子吸附在四重洞位; 在Fe(110)表面, 趋向于吸附在膺式三重位; 而在Fe(111)表面最稳定的吸附位是近似桥位.     

Pt（111）表面上一氧化碳的吸附与氧化反应

Ｐｔ（１１１）表面上一氧化碳的吸附与氧化反应１）刘金尧（清华大学一碳化工国家重点实验室北京１０００８４）ＸｕＭＺａｅｒａＦ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙＵｎｉｖｅｒｓｉｔｙｏｆＣａｌｉｆｏｒｎｉａＲｉｖｅｒｓｉｄｅＣＡ９２５２１）关键词...     

Colloid Particle Adsorption on Partially Covered (Random) Surfaces

The random sequential adsorption (RSA) approach was used to model irreversible adsorption of colloid particles at surfaces precovered with smaller particles having the same sign of surface charge. Numerical simulations were performed to determine the initial flux of larger particles as a function of surface coverage of smaller particles θ(s) at various size ratios lambda=a(l)/a(s). These numerical results were described by an analytical formula derived from scaled particle theory. Simulations of the long-time adsorption kinetics of larger particles have also been performed. This allowed one to determine upon extrapolation the jamming coverage θ(l)(infinity) as a function of the lambda parameter at fixed smaller particle coverage θ(s). It was found that the jamming coverage θ(l)(infinity) was very sensitive to particle size ratios exceeding 4. Besides yielding θ(l)(infinity), the numerical simulations allowed one to determine the structure of large particle monolayers at the jamming state which deviated significantly from that observed for monodisperse systems. The theoretical predictions suggested that surface heterogeneity, e.g., the presence of smaller sized contaminants or smaller particles invisible under microscope, can be quantitatively characterized by studying larger colloid particle adsorption kinetics and structure of the monolayer. Copyright 2001 Academic Press.     

Vibrational Structure of Methacrylates Europium(Iii) and Lanthanum(Iii): Dft and Ir Spectroscopy Study

DFT-D3/PBE0 and IR spectroscopy are employed to study the vibrational structure of europium(III) and lanthanum(III) methacrylates Ln(Macr)₃ (Ln = Eu, La; Macr is the methacrylate anion, CH₂CH(CH₃)COO^–). The calculated geometric and vibrational characteristics are consistent with the experimental data. By means of the calculation of the Eu₂(Macr)₆·(H₂O)₄ complex the experimental IR spectrum is interpreted. The effect of isomorphic lanthanum substitution for the europium ion in the Eu₂(Macr)₆·(H₂O)₄ complex is studied theoretically. A mechanism is proposed for the effect of the vibrational structure on the optical properties (at the isomorphic replacement of the europium ion and temperature elevation).     

DFT Study of Methylene Blue Adsorption on ZnTiO3 and TiO2 Surfaces (101)

The search for alternative materials with high dye adsorption capacity, such as methylene blue (MB), remains the focus of current studies. This computational study focuses on oxides ZnTiO₃ and TiO₂ (anatase phase) and on their adsorptive properties. Computational calculations based on DFT methods were performed using the Viena Ab initio Simulation Package (VASP) code to study the electronic properties of these oxides. The bandgap energy values calculated by the Hubbard U (GGA + U) method for ZnTiO₃ and TiO₂ were 3.17 and 3.21 eV, respectively, which are consistent with the experimental data. The most favorable orientation of the MB adsorbed on the surface (101) of both oxides is semi-perpendicular. Stronger adsorption was observed on the ZnTiO₃ surface (−282.05 kJ/mol) than on TiO₂ (–10.95 kJ/mol). Anchoring of the MB molecule on both surfaces was carried out by means of two protons in a bidentate chelating (BC) adsorption model. The high adsorption energy of the MB dye on the ZnTiO₃ surface shows the potential value of using this mixed oxide as a dye adsorbent for several technological and environmental applications.     

NO在Rh(100),Rh(111)面上吸附与直接分解的密度泛函理论研究

本文应用第一性原理的密度泛函(DFT)方法,使用DMol³计算程序,对NO在Rh(100)和Rh(111)面上的吸附与分解进行量化计算,力图解决NO在Rh(100)和Rh(111)面上的优选吸附位、直接分解的过渡态和活化能等重要问题.     

Development and Evaluation of a Nanoporous Iron (Hydr)oxide Electrode for Phosphate Sensing

Nanoporous iron (hydr)oxide electrodes are evaluated as phosphate sensors using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The intensity of the reduction peak current (I_cp) of the ferrihydrite working electrode is tied to phosphate concentration at low pH; however, a hematite electrode combined with the use of EIS provided reliable sensing data at multiple pH values. Nanoporous hematite working electrodes produced an impedance phase component (θ) that shifts with increasing phosphate, and, at chosen frequencies, θ values were fitted for the range 1 nM to 0.1 mM phosphate at pH 4 and pH 7 in 5 mM NaClO₄.     

Electrochemistry and Spectroscopy of Sulfate Complexes of (Tetraphenylporphyrinato)manganese

The electrochemical and spectroscopic properties of [Mn₂(tpp)₂(SO₄)] (H₂tpp=tetraphenylporphyrin=5,10,15,20‐tetraphenyl‐21H,23H‐porphine) were studied to characterize the stability of this compound as a function of solvent, redox state, and sulfate concentration. In non‐coordinating solvents such as 1,2‐dichloroethane, the dimer was stable, and two cyclic voltammetric waves were observed in the region for Mn^III reduction. These waves correspond to reduction of the dimer to [Mn^II(tpp)] and [Mn^III(tpp)(OSO₃)]^?, and reduction of [Mn^III(tpp)(OSO₃)]^? to [Mn^II(tpp)(OSO₃)]^2?, respectively. In the coordinating solvent DMSO, [Mn₂(tpp)₂(SO₄)] was unstable and dissociated to form [Mn^III(tpp)(DMSO)₂]⁺. A single voltammetric wave was observed for Mn^III reduction in this solvent, corresponding to formation of [Mn^II(tpp)(DMSO)]. In non‐coordinating solvent systems, addition of sulfate (as the bis(triphenylphosphoranylidene)ammonium (PPN⁺) salt) resulted in dimer dissociation, yielding [Mn^III(tpp)(OSO₃)]^?. Reduction of this monomer produced [Mn^II(tpp)(OSO₃)]^2?. In DMSO, addition of SO led to displacement of solvent molecules forming [Mn^III(tpp)(OSO₃)]^?. Reduction of this species in DMSO led to [Mn^II(tpp)(DMSO)].     

Vibrational spectroscopy and normal-mode analysis of Fe(II) octaethylporphyrin

The normal-mode spectrum for the four-coordinated heme compound Fe(II) octaethylporphyrin, Fe(OEP), has been determined by refining force constants to the experimental Fe vibrational density of states measured with nuclear resonance vibrational spectroscopy (NRVS). Convergence of the calculated spectrum to the data was achieved by first imposing D4 symmetry on the model structure as well as the force constants, progressively including different internal coordinates of motion, then allowing the true Ci (or S2) point group symmetry of the C(i)1 Fe(OEP) crystal structure. The NRVS-refined normal modes are in good agreement with Raman and IR spectra at high frequencies. Prior density functional theory predictions for a model porphyrin are similar to the core modes computed with the best-fit force field, but significant differences between D4 and Ci modes underline the sensitivity of porphyrin Fe normal modes to structural details. Some differences between the Ci best fit and the NRVS data can be attributed to intermolecular contacts not included in the normal-mode analysis.