共查询到20条相似文献,搜索用时 15 毫秒
1.
Vakarelski IU Ishimura K Higashitani K 《Journal of colloid and interface science》2000,227(1):111-118
An atomic force microscope (AFM) is used to study the adhesion between a silica sphere and a mica plate in pure water and solutions of monovalent cations (LiCl, NaCl, KCl, and CsCl). It is found that the adhesive force depends not only on the electrolyte concentration but also on the hydration enthalpy of cations and the contact time of the particle on the surface. Possible mechanisms by which the observed phenomena can be explained consistently are discussed extensively. It is suggested that the adhesive force is closely related to the structure of the layer of cations and water molecules adsorbed on the surfaces: the strong adhesive force is obtained when highly hydrated cations (Li(+), Na(+)) are adsorbed to form a thick but weakly adsorbed layer, while the weak adhesive force is observed when poorly hydrated cations (Cs(+), K(+)) are adsorbed to form a thin but strongly adsorbed layer. Copyright 2000 Academic Press. 相似文献
2.
The solubility of boric acid [B] in LiCl, NaCl, KCl, RbCl, and CsCl was determined as a function of ionic strength (0–6 mol ⋅ kg−1) at 25 ∘C. The results were examined using the Pitzer equation
where [B]0 is the concentration of boric acid in water and [B] in solution, γB is the activity coefficient, νi is the number of ions (i), λBc, λBa are parameters related to the interaction of boric acid with cation c and anion a, ζB-a−c is related to the interaction of boric acid with both cation and anion and m is the salt molality. The literature values for the solubility of boric acid in a number of other electrolytes were also examined using the same equation. The results for the 2νcλBc+2νaλBa term (equal to the salting coefficient k
S) were examined in terms of the ionic interactions in the solutions. The solubility of boric acid in LiCl, NaCl, and KCl solutions is not a strong function of temperature and the results can be used over a limited temperature range (5–35 ∘C). Boric acid is soluble in the order SO4 > NO3 and F > Cl > Br > I in common cation solutions. In common anion salt solutions, the order is Cs > Rb > K > Na > Li > H and Ba > Sr > Ca > Mg. The results were examined using correlations of k
S with the volume properties of the ions. When direct measurements were not available, k
S and ζB-c−a were estimated from known values of λBc and λBa.The values of λBc, λBa, and ζB-a−c can be used to estimate the boric acid activity coefficients γB and solubility [B] in natural mixed electrolyte solutions (seawater and brines) using the more general Pitzer equation
相似文献
3.
Gold-coated atomic force microscope (AFM) tips functionalized with amine-, hydroxyl-, carboxylic acid-, and methyl-terminated alkanethiol molecules were used to probe the adhesive forces of polystyrene and poly(acrylic acid) films in dry air (relative humidity < 0.5%). X-ray photoelectron spectroscopy (XPS) and contact angle measurements confirmed the quality and uniformity of similarly treated gold surfaces and the polymer films. XPS indicated that the amine-functionalized thiol films were protonated and comprised of multilayers. Contact angle data were used to calculate surface free energies, and DMT theory yielded the works of adhesion and interfacial free energies for the tip-substrate combinations. In the case of polystyrene, the work of adhesion followed the order methyl > carboxylic acid > hydroxyl > amine. For poly(acrylic acid), the observed order was hydroxyl > amine > carboxylic acid > methyl. 相似文献
4.
Zirconium 1,4-butylenediphosphonate[Zr(BDPA)] multilayers on a 3-mercaptopropylphosphonate-coated gold electrode were prepared by the conventional layer-by-layer method. The stability of the Zr(BDPA) multilayers in different supporting electrolyte solutions was studied by cyclic voltammetry(CV) and X-ray photoelectron spectroscopy(XPS) measurements. The results show that the Zr(BDPA) multilayers are very stable in 0.2 mol·L-1 KCl, 0.2 mol·L-1 KNO3 and low concentration phosphate buffer solution(PBS) with low pH values(c≤0.05 mol·L-1, pH≤6.8). While in high concentration 0.2 mol·L-1 PBS(pH=5.2~7.4), the Zr(BDPA) multilayers will be partially desorbed within two days, possibly due to the formation of more stable zirconium phosphate. 相似文献
5.
Colloidal probe microscopy was employed to study interactions between cellulose surfaces in aqueous solutions. Hydrodynamic forces must be accounted for in data analysis. Long-range interactions betweeen cellulose surfaces are governed by double-layer forces and, once surfaces contact, by osmotic repulsive forces and viscoelasticity. Increasing the ionic strength decreases surface potentials and increases adhesive forces. Polyelectrolytes cause strong steric repulsion at high surface coverage, where interactions are sensitive to probe velocity. Polymer bridging occurs at low coverage. The conformation of adsorbed polyelectrolytes depends on the polymer concentration. Copyright 2000 Academic Press. 相似文献
6.
Techane SD Gamble LJ Castner DG 《The journal of physical chemistry. C, Nanomaterials and interfaces》2011,115(19):9432-9441
Gold nanoparticles (AuNPs) with 14, 25 and 40nm diameters were functionalized with different chain length (C6, C8, C11 and C16) carboxylic acid terminated alkanethiol self-assembled monolayers (COOH-SAMs). X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to examine the changes in surface chemistry as both AuNP diameter and SAM chain length were varied. COOH-SAMs on flat gold surfaces were also examined and compared to the COOH-SAM on AuNP results. For a given surface, as the COOH-SAM chain length increased the XPS C/Au atomic ratio increased due to an increased number of carbon atoms per molecule in the overlayer and an increased attenuation of the Au substrate signal. For the C16 COOH-SAMs, as the size of AuNPs decreased the XPS C/Au atomic ratio and the apparent SAM thickness increased due to the increased curvature of the smaller AuNPs. The C16 COOH-SAMs on the flat Au had the lowest XPS C/Au atomic ratio and apparent SAM thickness of any C16 COOH-SAM covered Au surface. The effective take-off angles of the COOH-SAMs were also calculated by comparing the apparent thickness of COOH-SAMs with literature values. The effective take-off angle for C16 COOH-SAM on 14nm, 25nm and 40nm diameter AuNPs and flat Au were found to be 57°, 53°, 51° and 39°, respectively, for data acquired in a mode that collects a wide range of photoelectron take-off angles. The effective take-off angle for C16 COOH-SAM on 14nm AuNP and flat Au decreased to 52° and 0°, respectively, for data acquired in a mode that collects a narrow range of photoelectron take-off angles. The ToF-SIMS results showed similar changes in surface chemistry with COOH-SAM chain length and AuNP size. For example, the ratio of the sum of the C(1-4)H(x)O(y) positive ion intensities to the sum of the Au-containing positive ions intensities increased with decreasing AuNP size and increasing COOH-SAM chain length. Fourier transform IR spectroscopy in the attenuated total reflectance mode (FTIR-ATR) was used to characterize the crystallinity of the COOH-SAMs. The CH(2) stretching frequencies decreased with increasing COOH-SAM chain length on flat Au. The C16 COOH-SAM on the 14nm AuNPs exhibited a crystalline-like CH(2) stretching frequency. The size, size distribution, shapes and solution stability of AuNPs were investigated with transmission electron microscopy (TEM) and UV/VIS spectroscopy. As the average diameter of the AuNPs decreased the size distribution became narrower and the shape became more spherical. 相似文献
7.
J. Barthel 《Angewandte Chemie (International ed. in English)》1968,7(4):260-277
The present article deals with methods and results of conductance studies with special reference to nonaqueous solvents, e.g. ethanol, dioxane, dimethylformamide, acetonitrile, nitromethane, and acetone, in some cases mixed with water, as well as NH3, SO2, I2, etc. On the basis of a model in which the ions are represented as charged spheres and the solvent as a homogeneous isotropic medium, the conductance theory can (at least for low electrolyte concentrations) give a more or less complete representation of the problem. A new statistical treatment of the transport problem confirms important results of this representation. The present state of the investigation is finally outlined in a review of recent publications. 相似文献
10.
分光光度法测定水溶液中的有机酸含量 总被引:7,自引:0,他引:7
利用水溶液中的有机酸在高氯酸羟胺(HAP)和N,N′-二环己基碳酰亚胺(DCC)存在的条件下生成的羟肟酸,以及羟肟酸在酸性高氯酸铁溶液中显色的性质,建立了一种分光光度测定水中有机酸含量的方法。对显色剂的酸度、浓度、加入体积、HAP和DCC的浓度、加入体积以及显色反应的温度、反应时间对吸光度的影响进行了考察。结果表明,该显色反应在反应条件:0.0687mol/LHAP1.0mL、0.6mol/LDCC0.5mL、震荡均匀后室温下放置反应15min、0.02mol/L酸性高氯酸铁溶液(高氯酸浓度0.3mol/L)显色条件下具有最大的吸光度;并对正丁酸、正戊酸、苯甲酸进行了线性关系考察。结果表明,该检测方法具有仪器简单、操作方便、线性范围较宽、准确度高等优点,可用于那些不易从水溶液中萃取的有机酸的测定,也可用于液相色谱洗脱液中有机酸的测定。 相似文献
11.
Two types of aromatic polyamide particles were prepared from 4,4′-diphenyldicarbonyl chloride and 3,5-diaminobenzoic acid in a reaction solution containing water or pyridine. Particles obtained using water (PA-water) were coarse spheres containing COOH groups with a diameter of 1 µm. Particles obtained using pyridine (PA-pyridine) were smooth spheres containing COOH and COCl groups with a diameter of 80 nm. The molecular weight of PA-pyridine was less than that of PA-water. During modification of PA-pyridine using 4′-aminobenzo-15-crown-5-ether, the COCl groups reacted with NH2 groups of the crown ether in water, resulting in attachment of the crown ether to the particle surface. 相似文献
12.
M Valtiner X Banquy K Kristiansen GW Greene JN Israelachvili 《Langmuir : the ACS journal of surfaces and colloids》2012,28(36):13080-13093
We present a newly designed electrochemical surface forces apparatus (EC-SFA) that allows control and measurement of surface potentials and interfacial electrochemical reactions with simultaneous measurement of normal interaction forces (with nN resolution), friction forces (with μN resolution), and distances (with ? resolution) between apposing surfaces. We describe three applications of the developed EC-SFA and discuss the wide-range of potential other applications. In particular, we describe measurements of (1) force-distance profiles between smooth and rough gold surfaces and apposing self-assembled monolayer-covered smooth mica surfaces; (2) the effective changing thickness of anodically growing oxide layers with ?-accuracy on rough and smooth surfaces; and (3) friction forces evolving at a metal-ceramic contact, all as a function of the applied electrochemical potential. Interaction forces between atomically smooth surfaces are well-described using DLVO theory and the Hogg-Healy-Fuerstenau approximation for electric double layer interactions between dissimilar surfaces, which unintuitively predicts the possibility of attractive double layer forces between dissimilar surfaces whose surface potentials have similar sign, and repulsive forces between surfaces whose surface potentials have opposite sign. Surface roughness of the gold electrodes leads to an additional exponentially repulsive force in the force-distance profiles that is qualitatively well described by an extended DLVO model that includes repulsive hydration and steric forces. Comparing the measured thickness of the anodic gold oxide layer and the charge consumed for generating this layer allowed the identification of its chemical structure as a hydrated Au(OH)(3) phase formed at the gold surface at high positive potentials. The EC-SFA allows, for the first time, one to look at complex long-term transient effects of dynamic processes (e.g., relaxation times), which are also reflected in friction forces while tuning electrochemical surface potentials. 相似文献
13.
Despite the fact that there are two well-described routes to 2-adamantane carboxylic acid (IV)1,2 it is not an easily accessible compound. In connection with our work in the field of adamantane ketenes and other 2-substituted adamantane derivatives5,6 on adamantanone (I), followed by conversion of the enol ether (II) to the aldehyde (III) and oxidation of the latter to give 2-adanabtabe carvixtkuc acud (IV). The yield of this one-pot procedure is 70%-75% (about 10 runs). 相似文献
14.
反式环己烷羧酸衍生物的合成 总被引:2,自引:0,他引:2
低档液晶显示中所用的液晶材料,如联苯氰类、酯类等,具有高的粘度,低的清亮点及低的光化学、化学稳定性等缺点.随着液晶显示技术的发展,对高档液晶材料的要求越来越迫切.为了降低液晶材料的粘度指数,改造液晶分子的方法之一是用环己烷环代替分子中的苯环[1].因... 相似文献
15.
N. A. Bondarenko M. V. Raitarskaya M. V. Rudomino E. N. Tsvetkova 《Phosphorus, sulfur, and silicon and the related elements》2013,188(1-4)
Abstract Phosphorus-containing carboxylic acids are of great interest as potential antiviral substances (1). Thus, the search for the simple and technological methods of their synthesis draws much attention. 相似文献
16.
Igrunova A. V. Sirotinkin N. V. Uspenskaya M. V. 《Russian Journal of Applied Chemistry》2001,74(7):1203-1206
The influence of temperature, pH, and chemical composition of the medium on the equilibrium swelling of polymeric polyelectrolytic tetrazole-containing acrylic hydrogels was examined. 相似文献
17.
Within the field of single-entity electrochemistry through so-called impact experiments, the use of soft interfaces can be a valuable and advantageous complement to conventional solid microelectrodes, as recently demonstrated for both hard and soft micro- and nanoparticles. Additionally, this approach can offer a new platform for fundamental studies of key aspects of electronic and ionic transfers across liquid–liquid interfaces, with applications in relevant biological, technological and industrial systems. Experimental results with Interfaces between Two Immiscible Electrolyte Solutions (ITIES) are reviewed and discussed under the light of theoretical treatments are here revisited or developed. 相似文献
18.
《Analytical letters》2012,45(21-22):1685-1692
Abstract The coccidiostat monensin can be determined by voltammetry at the interface between two immiscible electrolyte solutions (ITIES) in the concentration range between 0.05 mM to 3 mM. The peaks obtained with cyclic voltammetry at the water/nitrobenzene interface correspond to the transfer of sodium ions from the aqueous to the nonaqueous phase facilitated by complexation with monensin functioning as an ionophore and are proportional to its concentrations. The method was applied to the extracts from Streptomyces cultures. 相似文献
19.
V. V. Dovlatyan K. A. Eliazyan V. A. Pivazyan A. P. Engoyan 《Chemistry of Heterocyclic Compounds》2003,39(9):1238-1241
We have carried out solvolysis of the previously described ethyl esters of 3-methyl(aryl)-4-methyl-2-thioxothiazoline-5-carboxylic acids, leading to the corresponding acids without breaking down the heterocycle. We synthesized a series of novel esters from the latter by treatment with dimethyl sulfate or reactive halides. Of these, only in the case of the ethyl ester of 3,4-dimethyl-2-thioxothiazoline-5-carboxylic acid did we obtain the hydrazinolysis product (the hydrazide), from which we synthesized novel hydrazones by treatment with aldehydes and ketones. 相似文献
20.
DeLu Yin Vince M. Purpero Ryota Fujii Qing Jing Romas J. Kazlauskas 《Chemistry (Weinheim an der Bergstrasse, Germany)》2013,19(9):3037-3046
Some serine hydrolases also catalyze a promiscuous reaction— reversible perhydrolysis of carboxylic acids to make peroxycarboxylic acids. Five X‐ray crystal structures of these carboxylic acid perhydrolases show a proline in the oxyanion loop. Here, we test whether this proline is essential for high perhydrolysis activity using Pseudomonas fluorescens esterase (PFE). The L29P variant of this esterase catalyzes perhydrolysis 43‐fold faster (kcat comparison) than the wild type. Surprisingly, saturation mutagenesis at the 29 position of PFE identified six other amino acid substitutions that increase perhydrolysis of acetic acid at least fourfold over the wild type. The best variant, L29I PFE, catalyzed perhydrolysis 83‐times faster (kcat comparison) than wild‐type PFE and twice as fast as L29P PFE. Despite the different amino acid in the oxyanion loop, L29I PFE shows a similar selectivity for hydrogen peroxide over water as L29P PFE (β0=170 vs. 160 M ?1), and a similar fast formation of acetyl‐enzyme (140 vs. 62 U mg?1). X‐ray crystal structures of L29I PFE with and without bound acetate show an unusual mixture of two different oxyanion loop conformations. The type II β‐turn conformation resembles the wild‐type structure and is unlikely to increase perhydrolysis, but the type I β‐turn conformation creates a binding site for a second acetate. Modeling suggests that a previously proposed mechanism for L29P PFE can be extended to include L29I PFE, so that an acetate accepts a hydrogen bond to promote faster formation of the acetyl‐enzyme. 相似文献