Nonenzymatic H2O2 Electrochemical Sensor Based on SnO2‐NPs Coated Polyethylenimine Functionalized Graphene

This paper demonstrated using polyethylenimine (PEI)‐functionalized graphene (Gr) incorporating tin oxide (SnO₂) hybrid nanocomposite as a platform for nonenzymatic H₂O₂ electrochemical sensor. The results of UV‐vis spectroscopy and X‐ray diffraction (XRD) confirmed the simultaneous formation of tin oxide (SnO₂) nanocomposite and reduction of graphene oxide (GO). Transmission electron microscopy (TEM) images showed a uniform distribution of nanometer‐sized tin oxide nanoparticles on the grapheme sheets, which could be achieved using stannous chloride (SnCl₂) complex instead of tin oxide as precursor. The electrochemical measurements, including cyclic voltammetry (CV) and amperometric performance (I‐t), showed that the PEI‐functionalized Gr supported SnO₂ (SnO₂‐PEI‐Gr) exhibited an excellent electrocatalytic activity toward the H₂O₂. The corresponding calibration curve of the current response showed a linear detection range of 9×10⁻⁶∼1.64×10⁻³ mol L⁻¹, while the limit of detection was estimated to be 1×10⁻⁶ mol L⁻¹. Electrochemical studies indicated that SnO₂ and functionalized Gr worked synergistically for the detection of H₂O₂.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.     

Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Ag/Cu2O Nanocomposites

The nanocomposites of Ag nanoparticles supported on Cu₂O were prepared and used for fabricating a novel nonenzymatic H₂O₂ sensor. The morphology and composition of the nanocomposites were characterized using the scanning electron microscope (SEM), transmission electron microscope (TEM), energy‐dispersive X‐ray spectrum (EDX) and X‐ray diffraction spectrum (XRD). The electrochemical investigations indicate that the sensor possesses an excellent performance toward H₂O₂. The linear range is estimated to be from 2.0 μM to 13.0 mM with a sensitivity of 88.9 μA mM^?1 cm^?2, a response time of 3 s and a low detection limit of 0.7 μM at a signal‐to‐noise ratio of 3. Additionally, the sensor exhibits good anti‐interference.     

基于三维有序大孔金电极的过氧化氢无酶传感器

采用反相胶体-晶体模板技术以及电化学沉积法制得了三维有序大孔金膜修饰电极,并对修饰电极进行了表征,在此基础上构建了新型的H2O2无酶传感器。研究表明,此传感器在1×10-6～5.5×10-5mol/L和8×10-5～1.3×10-3mol/L范围内对H2O2还原峰电流有良好的线性响应;检出限为3.3×10-7mol/L(S/N=3),具有良好的稳定性和重现性。     

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Carbon Electrode Amplified with PdxCuy Catalyst

Approximately global Pd and Pd₉₄Cu₆ alloy nano catalysts of average diameter 10.5 and 5.9 nm respectively, have been synthesized hydrothermally by wet chemical reduction and co-reduction methods without addition of any capping agent. X-ray diffraction and various microscopic studies are used to characterize the crystal phase and the morphology of the catalysts. Non-enzymatic amperometric glucose sensors based on these synthesized catalyst materials are tested and compared in alkali at different potentials by cyclic voltammetry and chronoamperometry. The sensors characterized by fixed potential chronoamperometry are found to be sufficiently sensitive to glucose at different negative potentials like −0.65 V, −0.40 V, −0.10 V with respect to Hg/HgO electrode (E⁰≈0.1 V), where the reactions of glucose oxidation are different. The sensor constructed with Pd₉₄Cu₆ nanocatalyst shows an outstanding sensitivity of 10.1 mA cm⁻² mM⁻¹ which is considerably higher than that constructed with similarly synthesized Pd nanoparticles at any potential and that found in the literature of Pd based glucose sensors. The lower detection limit and response time obtained with Pd₉₄Cu₆ nanoparticles are 10 μM and 3 s respectively. These sensors also exhibit high specificity to glucose and significant anti-interference property against some common species like ascorbic acid (AA), uric acid (UA) and some monosaccharides whose interfering effects are found to decrease with decrease of potential of glucose oxidation. The electrocatalytic ability of the synthesized Pd and Pd₉₄Cu₆ nanoparticles toward glucose oxidation has also found promising in blood sample at different potentials.     

基于纳米二氧化锆与铂微粒复合修饰玻碳电极的甲醛传感器研究

采用循环伏安法在玻碳电极表面依次电沉积纳米二氧化锆和铂微粒,制备了一种检测甲醛的新型电化学传感器。用电镜扫描对该修饰电极表面进行了表征,循环伏安法和线性扫描伏安法研究了甲醛在该修饰电极上的电催化氧化作用,优化了实验参数。结果表明,该修饰电极对甲醛有很好的电催化氧化作用,在0.1 mol/L H2SO4溶液中,甲醛的氧化峰电流与其浓度在1.0×10-6~5.0×10-3mol/L范围内呈良好线性关系,回归方程为Ip(μA)=79.95+2.005×105c(mol/L),相关系数r=0.999 3,检出限为5.0×10-7mol/L。     

RuO_2/MWNTs纳米复合材料用于无酶型葡萄糖传感器的研究

采用水热合成法在多壁碳纳米管(MWNTs)上负载了Ru O2纳米颗粒,并以Nafion为固定剂将复合材料修饰于玻碳电极的表面,制备了一种新型无酶型葡萄糖传感器。利用扫描电镜(SEM)、X射线衍射(XRD)、电化学方法对复合材料进行表征,发现碳纳米管上的Ru O2为纳米级,分散均匀。该复合材料修饰的电极对葡萄糖响应电流明显,并且受抗坏血酸(AA)、多巴胺(DA)和尿酸(UA)的干扰小。采用安培法测定葡萄糖,其线性范围为1.0×10-5~1.2×10-2 mol/L(R2=0.998),灵敏度41.826μA cm-2(mmol/L)-1,检测限2.2×10-5 mol/L(信噪比为3),响应时间5.2 s,具有较好的稳定性。     

CuO Nanospheres Based Nonenzymatic Glucose Sensor

CuO nanospheres, synthesized by a simple one‐step hydrothermal method, have been applied to modify the glassy carbon (GC) electrode for sensitive nonenzymatic glucose detection. The CuO nanospheres modified electrode, compared to the Nafion modified GC electrode, exhibits an enhanced electrocatalytic property for direct glucose oxidation and shows a fast response and a high sensitivity for the amperometric detection of glucose. It has been determined that the dissolved oxygen is not involved in glucose oxidation and the high concentration of NaCl does not poison the electrode. These results also indicate that CuO nanospheres have great potential application in electrochemical detection.     

电沉积Cu_2O在无酶葡萄糖传感器中的应用

采用电化学沉积法在玻碳电极表面制备了Cu_2O,利用X射线衍射(XRD)和扫描电镜(SEM)对Cu_2O的微观结构和表面形貌进行了表征,通过循环伏安法和计时电流法研究了Cu_2O对葡萄糖的电催化氧化性能。结果表明:该修饰电极对葡萄糖有良好催化作用,葡萄糖检测的线性范围为5.0μmol/L~6.23mmol/L,检测限(S/N=3)为0.4μmol/L。该传感器制备简单,稳定性和重复性好,可用于实际样品的测定。     

Nonenzymatic Electrochemical Glucose Sensor Based on Novel Copper Film

Novel copper (Cu) film composed of pillar‐like structure was synthesized on indium‐doped tin oxide (ITO) substrate by electrodeposition in acetate bath with proline as additive for the first time and used to construct nonenzymatic glucose sensor. When applied to detect glucose, such prepared electrode showed low operating potential (0.4 V), high sensitivity (699.4499 µA mM⁻¹ cm⁻²), and fast response time (<3 s) compared with other Cu‐based electrodes. In addition, the prepared electrode also offered good anti‐interference ability to ascorbic acid, uric acid and acetaminophen. Present study provides new insights into the control of Cu film morphology for sensor fabrication.     

Development of Nonenzymatic Hydrogen Peroxide Sensor Based on Successive Pd‐Ag Electrodeposited Nanoparticles on Glassy Carbon Electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing palladium? silver nanoparticles (NPs) on a glassy carbon electrode. The morphology of the modified electrode was characterized by Scanning electron microscopy (SEM). The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability, high sensitivity, excellent selectivity towards reduction of hydrogen peroxide (H₂O₂). The response to H₂O₂ is linear in the range between 0.30 μM to 2.50 mM, and the detection limit is 0.1 μM (at an S/N of 3).     

Pt/DNA-MWCNTs/GC电极制备及其H2O2还原的电催化活性

将DNA功能化多壁碳纳米管（MWCNTs）复合材料修饰于玻碳基底（GC）表面制得DNA-MWCNTs/GC电极,并在此基础上电沉积负载Pt纳米颗粒构建了一种新型无酶H₂O₂传感电极. 利用扫描电子显微镜（SEM）表征制得的修饰电极,同时通过循环伏安法和计时电流法研究了该传感电极的H2O2响应性能. 结果表明,该传感电极的H₂O₂检测在0.04 ~ 18.07 mmol·L^-1浓度范围内成线性相关,检出限3.85 μmol·L^-1（S/N = 3）,且有良好的重现性、稳定性与选择性.     

Cu and Ni Nanoparticles Deposited on ITO Electrode for Nonenzymatic Electrochemical Carbohydrates Sensor Applications

A novel non‐enzymatic carbohydrates sensor which was an indium tin oxide (ITO) glass electrode modified by nickel and copper nanoparticles (Cu/Ni/ITO) was developed by an electrochemical method. The crystallinity, morphology, electrochemical measurements and amperometric response of the as‐prepared ITO modified electrode were examined by the X‐ray diffraction (XRD), scanning electron microscopic (SEM), cyclic voltammetry (CV) and chronoamperometry, respectively. The Cu/Ni/ITO electrode had better electroactivity for glucose oxidation than that obtained using Cu/ITO, Ni/ITO, and Ni/Cu/ITO. The logistic regression equation, I_pa = (A ₁ – A ₂)/[1 + (C_glucose /x ₀)^p ] + A ₂, was used to fit the calibration curves of glucose aqueous solution concentrations and responsive current intensity. In research of other saccharides, such as fructose, lactose, sucrose, and maltose, which were detected by the Cu/Ni/ITO electrode, it was obvious that the Cu/Ni/ITO electrode was more sensitive to monosaccharides than disaccharides. Monosaccharides and disaccharides can be detected because the saccharides themselves had aldehyde group or be isomerized to an isomer having an aldehyde group in alkaline environment, and then aldehyde group produced carboxylic acid in the catalytic oxidation of the electrode, which lead to the change of electrode surface conductivity and the appearance of oxidation peak, and the alkaline environment further promotes the above reaction.     

An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.     

基于叶片状氧化铜纳米材料的无酶葡萄糖传感电极

将Nafion交联剂与纳米材料修饰至玻碳电极基底制备一种无酶葡萄糖传感器,通过循环伏安曲线、时间-电流曲线检测该电极电化学特性. 氧化铜纳米复合膜具有高比表面积和多活性点位的优点. 实验结果表明,氧化铜纳米电极对葡萄糖的检测线性响应范围0.01 ~ 0.3 mmol·L^-1,灵敏度1783.58 μA·L·mmol^-1·cm^-2,检测限0.80 μmol·L^-1 (S/N=3),稳定性较好,能抵抗抗坏血酸、多巴胺和尿酸干扰.     

基于纳米CuO敏感材料的电流型NO2传感器研究

采用浸渍技术在多孔的氧化钇稳定的氧化锆(YSZ)中制备了纳米CuO敏感材料,并以其为敏感电极,YSZ为固体电解质,制备了一种新型的电流型NO2传感器。采用X射线衍射仪和扫描电子显微镜表征了NO2传感器的相组成和微观形貌,应用IM6e型电化学工作站测试了其气敏性能。结果表明,CuO颗粒粒径约为100 nm,且与基体结合紧密。在500～600℃时,传感器对NO2表现出良好的敏感性。在极化电压为-300 mV,NO2体积分数为0～5.0×10-4时,传感器的响应电流值与NO2浓度之间呈良好的线性关系。在被测气体总流量为400 cm3/min时,传感器信号90%的响应和恢复时间均为50 s。传感器响应信号在测试时间内具有良好的稳定性。共存气体O2和CO2对传感器的敏感性几乎没有影响。     

An Enzyme-free Electrochemical H2O2 Sensor Based on a Nickel Metal-organic Framework Nanosheet Array

In this work, we reported the development of a nickel metal-organic framework nanosheet array on Ti-mesh (Ni-MOF/TM) as an enzyme-free electrochemical sensing platform for H₂O₂ determination. The as-obtained sensor exhibited outstanding detection properties of H₂O₂, which might be gifted from the large specific surface area, abundant active sites of Ni-MOF nanoarrays. The sensor displayed a good linear range (0.8 μM–4.6×10³ μM), a detection limit as low as 0.26 μM, a high sensitivity (307.5 μA mM⁻¹ cm⁻²), and a rapid response. Moreover, this enzyme-free sensor is promising for point-of-care (POC) testing of H₂O₂ in human serum attribute to the excellent performance of Ni-MOF and the simple preparation process of the sensor.     

基于Nafion固定磷钼酸和石墨烯共修饰PEDOT膜电极的电化学过氧化氢传感器

以玻碳电极（GCE）为基底电化学聚合制得聚3,4-乙烯二氧噻吩（PEDOT）膜修饰电极,再通过Nafion共固定磷钼酸和石墨烯构建了一种新型的无酶电化学H₂O₂传感器. 利用扫描电子显微镜（SEM）表征制得的修饰电极,并通过循环伏安法和计时电流法研究了传感器对H₂O₂的响应性能. 结果表明,在优化条件下,该传感器对H₂O₂还原具有良好的电催化性能,检测H₂O₂的线性范围为2.91×10^-6 ~ 1.83×10^-2 mol•L^-1,检出限和灵敏度分别为9.90×10^-7 mol•L^-1（S/N = 3）和112.5 μA•（mmol•L^-1）^-1. 此外,该传感器还具有良好的重现性和选择性.     

铂电极表面生物素-亲和素固载单链脱氧核糖核酸的电化学传感器

通过直接吸附将亲和素固定在Pt电极表面,联于生物素标记的脱氧核糖核酸(DNA)探针,制备了电化学基因传感器,建立了Pt电极表面修饰单链脱氧核糖核酸(ssDNA)的方法。修饰电极与待测溶液中人工合成的转基因食品中常有的花椰菜花叶病毒35S启动子(CaMV35S)或根癌农杆菌终止子(NOS)DNA片段进行杂交,以邻菲罗林钴络合物[Co(phen)3^3 ]为杂交指示剂,循环伏安法测量,通过杂交前后指示剂峰电流的变化检测DNA杂交的量。研究了电极修饰、杂交反应及测量的适宜条件,在优化实验条件下,峰电流的差值与DNA杂交量之间有良好的线性关系,相关系数r=0．9996。杂交后的电极经热变性再生,可重复使用多次。     

Investigation of H2O2 Electrochemical Behavior on Ferricyanide-Confined Electrode Based on Ionic Liquid-Functionalized Silica-Mesostructured Cellular Foam

In this work, ionic liquid (IL) of 1-propyl-3-methyl imidazolium chloride-functionalized silica-mesostructured cellular foam (MCF) was prepared. The obtained MCF-IL was used to construct the Fe(CN)₆³⁻-confined electrode (MCF-IL-Fe(CN)₆³⁻/PVA) and H₂O₂ electrochemical behavior on the electrode was investigated. It was found that H₂O₂ was oxidized on the freshly prepared electrode while catalytically electro-reduced on the acid pretreated one. Cyclic voltametric results revealed that the real catalyst for catalytic reduction of H₂O₂ was Prussian blue (PB) rather than Fe(CN)₆³⁻. The electrocatalytic ability of the acid-pretreated MCF-IL-Fe(CN)₆³⁻/PVA electrode offered a wide linear range for H₂O₂ detection. The present study on H₂O₂ electrochemical behavior on an MCF-IL-Fe(CN)₆³⁻/PVA electrode might provide useful information for further developing integrated Fe(CN)₆³⁻-mediated biosensors as H₂O₂ is extensively involved in the classic reaction containing oxidase enzymes.