Density Functional Theory Study of HCN Adsorption on Small Gold Clusters

A theoretical study was carried out on the adsorption of hydrocyanic acid on small Aun （n ≤ 7） clusters using density functional methods. For HCN adsorption on gold clusters, no dependence was found with respect to the even-odd alternation in relation to the number of gold atoms in the cluster. The HCN molecule is adsorbed at simple adsorption sites （1-fold coordination）, perpendicular to the adsorption site. The largest adsorption energy is only about 74.61 kJ·mol^-1, which indicates that the HCN molecule does not decompose and the C-N bond retains triple bond, and that the C-H and C-N stretching frequencies are only weakly perturbed. The adsorbed C-N and C-H stretching frequencies are blue- and red-shifted compared with the values of free HCN, respectively.     

Density Functional Theory Study on the Adsorption of Dioxygen on Small Pt-Pd Clusters

1 INTRODUCTION The bimetallic nanoclusters are of standing inte- rest since they can exhibit catalytic, electronic and optical properties distinct from those of corre- sponding pure nanoclusters[1～4]. Palladium and pla- tinum, well known for their catalytic properties, are often used as the catalyst in different fuel cells[5～8]. Several experimental results illustrate that for the oxygen reduction reaction (ORR), which is one of the primary reactions taking place in many fuel cells and…     

Theory Study of the Adsorption of Hydrocyanic Acid onto Small Silver Clusters

Density functional theory calculations have been performed to study the interaction of small silver clusters, Ag2 ~Ag9, with HCN. The adsorption of HCN on-top site of the silver cluster, among various possible sites, is energetically preferred. The adsorption energies of HCN on the silver clusters reach a local maximum at n = 4, which is only about 0.450 eV, indicating that the adsorbed HCN molecule is weakly perturbed. The adsorbed C–N and C–H stretching frequencies are blue- and red-shifted compared with the values of free HCN, respectively.     

O与O2在Au团簇上吸附的密度泛函理论研究

采用基于密度泛函理论(DFT)的Dmol³程序系统研究了O原子与O₂在 Au₁₉与Au₂₀团簇上的吸附反应行为. 结果表明: O在Au₁₉团簇顶端洞位上的吸附较Au₂₀强; 在侧桥位吸附强度相近. O与O₂在带负电Au团簇上吸附较强, 在正电团簇吸附较弱. 从O―O键长看, 当金团簇带负电时, O―O键长较长, 中性团簇次之, 正电团簇中O―O键长较短, 因而O₂活化程度依次减弱. 电荷布居分析表明, Au团簇带负电时, O与O₂得电子数较中性团簇多, 而团簇带正电时, 得电子数较少. 差分电荷密度(CDD)表明, O₂与Au团簇作用时, 金团簇失电子, O₂的π^*轨道得电子, 使O―O键活化. O₂在Au₁₉^-团簇上解离反应活化能为1.33 eV, 较中性团簇低0.53 eV; 而在Au₁₉⁺上活化能为2.27 eV, 较中性团簇高0.41 eV, 这与O₂在不同电性Au₁₉团簇O―O键活化规律相一致.     

Density Functional Study on Adsorption of NO on AuSe (010) Surface

NO molecule adsorption on (010) surface of gold selenide (AuSe) has been studied with a periodic slab model by means of the GGA‐PW91 exchange‐correlation functional within the framework of density functional theory (DFT). Four different on‐top adsorption sites Au(1), Au(2), Se(1) and Se(2) were considered for α‐AuSe and three on‐top adsorption sites Au(1), Au(2) and Se(1) for β‐AuSe. N‐end and O‐end adsorptions of NO were investigated for the above sites. The results show that N‐end adsorptions are preferred for α‐ and β‐AuSe and O‐end adsorptions are not feasible and thought as physisorption with the weak adsorption energies from 6.0 to 10.8 kJ/mol. For the N‐end adsorptions on α‐ and β‐AuSe (010) surfaces, Au(2) sites are most favorable with the adsorption energies 89.0 and 78.0 kJ/mol for α‐ and β‐AuSe, respectively. However, the adsorptions at Au1 sites are very weak with the adsorption energies of 27.8 and 7.5 kJ/mol, respectively. In case of the adsorption of N‐down orientations of NO at Se sites for α‐ and β‐AuSe (010) surfaces, the adsorption activities of Se(1) and Se(2) sites on the α‐AuSe (010) surface and Se(1) site on the β‐AuSe (010) surface are almost the same with the adsorption energies 51.2, 52.7 and 49.2 kJ/mol. The geometric optimizations for adsorption configurations were calculated along with accounting for stretching frequency and density of states in our work.     

A Density Functional Study of Small Tungsten Clusters Adsorbed on the MgO(001) Surface

Metal atoms, clusters, and thin films supported on surfaces of metal oxides have attracted a lot of attention not only due to the fundamental interest in the basic nature of metal-oxide interfaces, but also because of their numerous practical applications in catalysis, microelectronics, as coatings for corrosion protection and gas-sensors^[1,2]. In this paper, adsorption of tungsten clusters W_n (n=l-4) on the ideal MgO(001) surface has been studied computationally at the density functional (DF) level of theory with the help of a scalar-relativistic variant of the linear combination of Gaussian-type. orbitals density functional method (LCGTO-DF)^[3] as implemented in the program PARAGAUSS for parallel computing^[4]. Stucture and energetic features of the adsorption complexes W_n/MgO(001) have been analyzed. The gradient-corrected Becke-Perdew functional was used self-consistently. Spin-polarized calculations were performed in order to account for the possible open-shell nature of the metal clusters.     

A Density Functional Study of Small （NiTi）x Clusters with x=1-3

Systematic studies on the geometry, electronic structure and vibrational properties of small (NiTi)x clusters with x=1-3, within the framework of the density functional theory, were performed in this work. The electronic structure analyses were used to investigate the bonding between the early-late(EL) transition metals in their alloy. The results of our calculations have been used to predict (NiTi)x clusters structure for the ground state and confirm that s-electron density is transferred from Ti atoms to Ni atoms followed by the back donation of electrons through the d-orbital. The study provides a fragment approach based on the isolobal analogy that NiTi molecular fragments play a significant role in forming clusters.     

Density Functional Study of Small Neutral and Charged Silver Cluster Hydrides.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.     

Density Functional Theory Studies on the Adsorption of NH2NO2 on Al13 Cluster

Density functional theory method with full geometry optimization was used to study the adsorption of nitroamine (NH₂NO₂) on Al₁₃ cluster. Both dissociative and nondissociative adsorption structures were predicted with different NH₂NO₂ molecule orientations on Al₁₃ cluster surfaces. In dissociative chemisorption, the main decomposition products of NH₂NO₂ are O atom(s) and NH₂NO or NH₂N species. The O atoms being ruptured from the N?CO bond form strong Al?CO bonds with the neighboring Al around the adsorbed sites. In addition, the species obtained as a result of O atom elimination remains bonded to the surface. The largest adsorption energy is ?737.66?kJ/mol when the NH₂NO₂ molecule decomposes into two O atoms and a NH₂N fragment. For nondissociative adsorption, the seriously deformed nitroamine forms various N?CO?CAl bonding configurations with Al. The significant charge transfer occurs for all adsorption configurations. The most charge transfer is 2.068 e from the Al cluster surface to the fragments of the decomposed NH₂NO₂. The change of the electronic structures is obvious due to the adsorption or dissociation of NH₂NO₂ molecule. Nitroamine readily oxidizes the aluminum surface of the Al₁₃ cluster.     

Adsorption of Co2B2 and Ni2B2 Clusters on the TiO2 (110) Surface: a Density Functional Study

Based on density functional theory and generalized gradient approximation calculations, the adsorption of Co2B2 and Ni2B2 clusters on the rutile TiO2 (110) surface has been investigated utilizing periodic supercell models. Unambiguously, the results demonstrate that the hollow site turns out to be preferable for Co2B2 cluster while Ti2 site is for Ni2B2 cluster to adsorb. Orbital population analysis indicates a strong interaction between Co2B2 and O atom of TiO2 surface, which can be attributed to the overlap of Co 3d and surface O 2p orbital. Similarly, for Ni2B2 , the bonding interaction occurs mostly through the interaction of Ni 3d/4s and O 2p orbitals. Note that, there is also an interaction within the Co2B2 clusters (Ni2B2) through B 2s/2p and Co 3d orbitals (Ni 3d/4s). Moreover, orbital analysis results shows that the strong bonding between Ni2B2 and Ti2 site is due to the overlap of HOMO of Ni2B2 and d-orbital of five-coordinated titanium atoms.     

ChemInform Abstract: Local Density Functional Study of Copper Clusters: A Comparison Between Real Clusters,Model Surface Clusters,and the Actual Metal Surface.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

硅氧团簇(SiO2)nO2H4的密度泛函理论研究

提出硅氧团簇(SiO2)nO2H4的两种新构型: 基于笼状结构和环状结构的构型, 并与链状构型相比较, 用密度泛函理论的B3LYP方法在6-31G(d)基组水平上计算了三种构型n=2～22(n取偶数)的几何结构、平均结合能、能隙以及能量的二次差分. 分析计算结果发现, 笼状构型不但在n=4和8处存在幻数团簇(实验上已经观察到), 而且预测在n=14处也存在类似的幻数团簇; 此外, 与(SiO2)n团簇不同的是, (SiO2)nO2H4团簇的环状构型的稳定性从n=4开始大于链状构型, 意味着水的加成对硅氧团簇的稳定性有着重要的影响.     

放射性碘分子在Cu2O表面的吸附:第一性原理密度泛函研究

采用第一性原理密度泛函计算方法和周期性平板模型系统研究了放射性碘分子在Cu₂O三个低指数表面的吸附行为。通过计算若干平衡吸附构型的结构参数和吸附能评估了不同特征吸附位的作用。构型优化计算表明所选晶面存在适度的结构弛豫。计算结果表明,与Cu₂O（110）表面相比,Cu₂O（100）和（111）晶面表现出更高的碘分子吸附反应活性。其中,表面氧原子位（O_S）和配位未饱和铜原子位（Cu_CUS）分别为Cu₂O（100）和（111）晶面的能量最优吸附位点。此外,针对几种典型吸附结构计算分析了其电子结构信息,以进一步阐明吸附体系之间的相互作用机理。     

密度泛函方法研究卤族原子(F,Br,I)与银原子簇的相互作用

应用密度泛函理论计算方法研究了气相中的单个的F, Br, I原子吸附在中性和带正、负电荷的银原子团簇上的平衡几何构型 Ag_nX^0,±1 (X＝F, Br, I)、吸附能、电荷转移量以及碎片化模式, 并与先前研究过的氯原子在银原子簇上的吸附做了对比. 结果表明卤族原子在银原子簇上的吸附得到的相似的最稳定几何构型, 具有相似的吸附性质. 吸附能和电子转移量的大小顺序为F＞Cl＞Br＞I, 与电负性顺序相一致.     

甲醛在CeO2(111)表面吸附的密度泛函理论研究

采用基于第一性原理的密度泛函理论和周期平板模型, 研究了甲醛在以桥氧为端面的CeO2(111)稳定表面上的吸附行为. 通过对不同覆盖度, 不同吸附位的甲醛吸附构型、吸附能及电子态密度的分析发现, 甲醛在CeO2(111)表面存在化学吸附与物理吸附两种情况. 化学吸附结构中甲醛的碳、氧原子分别与表面的氧、铈原子发生相互作用, 形成CH2O2物种; 吸附能随着覆盖度的增加而减小. 与自由甲醛分子相比, 物理吸附的甲醛构型变化不大, 其吸附能较小. 利用CNEB(climbing nudged elastic band)方法计算了甲醛在CeO2(111)表面的初步解离反应活化能(约1.71 eV), 远高于甲醛脱附能垒, 这与甲醛在清洁CeO2(111)表面程序升温脱附实验中产物主要为甲醛的结果相一致.     

2-氯噻吩在 Rh(111) 表面吸附的密度泛函理论研究

 采用密度泛函理论探讨了 2-氯噻吩分子在 Rh(111) 表面上吸附行为. 结果表明, 平行的 hol 位及 bridge 位上的吸附最稳定. 吸附后, 2-氯噻吩键长发生明显变化, 分子平面被扭曲, 分子中 C–H(Cl, S) 相对于金属表面倾斜上翘. 垂直吸附模式不如平行吸附模式稳定, 但吸附后噻吩环未发生变形. hol 及 bridge 吸附模式下 2-氯噻吩的芳香性已遭破坏, 噻吩环上的碳原子呈现准 sp3 杂化. 在平行的 hol 位吸附后, 2-氯噻吩环累计得到 0.77 个电子, 而 Rh(111) 表面累计失去 1.19 个电子.     

A Density Functional Investigation of Fluorinated Silicon Clusters

Density functional calculations have been carried out on a series of fluorinated empty cages X_nF_n(n=2–20) with X?Si, Ge, and Sn. It indicates that the fullerene‐like cage structure with pentagons turns out to be the most stable with n increasing, and the stability of the X_nF_n isomers increases with the number of five‐membered rings. The HOMO‐LUMO gap for Ge (n=6, 10) cages is found to be even larger than the values for Si cages, though in bulk Ge has a smaller band gap than Si. Moreover, calculation of the Gibbs free energy of oligomerization reaction of SiF→1/n (SiF)_n showed that this reaction is exothermic even at 900 K, indicating the favorability of their formation from the SiF monomer.     

Structure and Energy of Mo27SxCy Clusters: A Density Functional Theory Study

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.