Optimal ordering and pricing policies in a single-period environment with multivariate demand and markdowns

This paper investigates a single-period inventory model in which the demand of the product is a deterministic, multivariate function of price, time, and level of inventory. Models are formulated for the basic pricing case and the case with a price markdown during the season. Solution methodologies are presented for each case when the pricing decisions are predetermined and when they are decision variables. Comments on the practical use of this model are presented, and sensitivity analysis is conducted on the decision variables and demand parameters.     

Extreme inaccuracies in Gaussian Bayesian networks

To evaluate the impact of model inaccuracies over the network’s output, after the evidence propagation, in a Gaussian Bayesian network, a sensitivity measure is introduced. This sensitivity measure is the Kullback-Leibler divergence and yields different expressions depending on the type of parameter to be perturbed, i.e. on the inaccurate parameter.In this work, the behavior of this sensitivity measure is studied when model inaccuracies are extreme, i.e. when extreme perturbations of the parameters can exist. Moreover, the sensitivity measure is evaluated for extreme situations of dependence between the main variables of the network and its behavior with extreme inaccuracies. This analysis is performed to find the effect of extreme uncertainty about the initial parameters of the model in a Gaussian Bayesian network and about extreme values of evidence. These ideas and procedures are illustrated with an example.     

考虑合同保质期的快速失效药品的二级供应链库存策略研究

医院药品对保质期和服务水平有非常高的要求,同时,药品的库存空间在医药库存中也有重要影响。首先针对快速失效的医药药品考虑了医药库存的合同保质期以及库存空间约束,同时考虑医院库存以及制造商库存,基于经济订货批量模型和经济生产批量模型建立了二级供应链的医药库存模型,然后用MATLAB软件求解了模型最优解,并对一些重要参数进行了敏感性分析。研究发现,合同保质期对医院订购批量、制造商生产批量和总库存成本有一定的影响,其中对于制造商的生产批量以及医院的库存成本影响较大。如果不考虑合同保质期的约束,将会对总库存成本带来更大损失。     

Relief inventory modelling with stochastic lead-time and demand

The irregular demand and communication network disruption that are characteristics of situations demanding humanitarian logistics, particularly after large-scale earthquakes, present a unique challenge for relief inventory modelling. However, there are few quantitative inventory models in humanitarian logistics, and assumptions inherent in commercial logistics naturally have little applicability to humanitarian logistics. This paper develops a humanitarian disaster relief inventory model that assumes a uniformly distributed function in both lead-time and demand parameters, which is appropriate considering the limited historical data on relief operation. Furthermore, this paper presents different combinations of lead-time and demand scenarios to demonstrate the variability of the model. This is followed by the discussion of a case study wherein the decision variables are evaluated and sensitivity analysis is performed. The results reveal the presence of a unique reorder level in the inventory wherever the order quantity is insensitive to some lead-time demand values, providing valuable direction for humanitarian relief planning efforts and future research.     

Global optimal policy for vendor–buyer integrated inventory system within just in time environment

Traditionally, inventory problems for the vendor and the buyer are treated separately. In modern enterprises, however, the integration of vendor–buyer inventory system is an important issue. This co-operative approach to inventory management contributes to the success of supply chain management by minimizing the joint inventory cost. The joint inventory cost and the response time can further be reduced when the buyer orders and the vendor replenishes the required items just in time (JIT) for their consumption. The inclusion of the JIT concept in this model contributes significantly to a joint inventory cost reduction. A numerical example and sensitivity analysis are carried out. The derived results show an impressive cost reduction when compared with Goyal’s model.     

Effect of deterioration on the instantaneous replenishment model with imperfect quality items

The assumptions required to justify the use of the economic order quantity model (EOQ) are rarely met. To provide mathematical models that more closely represent real-life situations, these assumptions must be relaxed. Among these assumptions are, first, items stocked are of perfect quality, and second, they preserve their characteristics during their stay in inventory. This paper considers a modified EOQ-type inventory model for a deteriorating item with unreliable supply. That is, a percentage of the on-hand inventory is wasted due to deterioration. Moreover, orders may contain a random proportion of defective items, which follow a known distribution. As soon as an order is received, a retailer conducts a screening process to identify imperfect quality items, which are salvaged as a single batch at the end of the screening process. First, a mathematical model is developed, assuming that no shortages are allowed. For that, it is assumed that the inventory level when placing an order is just enough to cover the demand during the screening period. The concavity of the profit function is established and sensitivity analysis is provided to analyze the impact of changing various model parameters on the optimal order quantity and profit. Then, the assumption of no shortages is relaxed, and a model is developed to incorporate backorders. We analyze the model with backorders numerically and provide managerial insights.     

Impact of RFID technology on inventory control policy

RFID application can improve operation performance in a supply chain by reducing or eliminating inventory misplacement and shrinkage. In this paper, we present a periodic review inventory model to investigate and characterize the multiperiod inventory control policies in both non-RFID and RFID cases when the firm encounters misplacement and shrinkage. The optimal inventory control policy is proved to be a two-control limit policy. The control limits in both the non-RFID case and the RFID case are analyzed and examined, while considering the impact of shrinkage and misplacement on inventory policies. A critical inventory level is determined to identify the relationship of higher inventory level control limits between the RFID case and the non-RFID case. An intensive numerical study with sensitivity analysis of selling price, misplacement rate, shrinkage rate, inventory recovery rate, and tag price is conducted. We find that when RFID technology is adopted, the inventory control policy in the RFID case is much more stable than that of the non-RFID case, as the misplaced inventory can be recovered perfectly and instantly for sale and the inventory shrinkage can be reduced by RFID technology. In addition, one of our intriguing findings is that when the shrinkage rate is below a threshold value which is independent of parameters, RFID application has no effect on inventory control policy if the misplaced inventory can be recovered in a timely manner by physical audit, which has not been revealed in previous studies.     

Fuzzy profit measures for a fuzzy economic order quantity model

Changing economic conditions make the selling price and demand quantity more and more uncertain in the market. The conventional inventory models determine the selling price and order quantity for a retailer’s maximal profit with exactly known parameters. This paper develops a solution method to derive the fuzzy profit of the inventory model when the demand quantity and unit cost are fuzzy numbers. Since the parameters contained in the inventory model are fuzzy, the profit value calculated from the model should be fuzzy as well. Based on the extension principle, the fuzzy inventory problem is transformed into a pair of two-level mathematical programs to derive the upper bound and lower bound of the fuzzy profit at possibility level α. According to the duality theorem of geometric programming, the pair of two-level mathematical programs is transformed into a pair of conventional geometric programs to solve. By enumerating different α values, the upper bound and lower bound of the fuzzy profit are collected to approximate the membership function. Since the profit of the inventory problem is expressed by the membership function rather than by a crisp value, more information is provided for making decisions.     

Age-based vs. stock level control policies for a perishable inventory system

In this study, we investigate the impact of modified lotsize-reorder control policy for perishables which bases replenishment decisions on both the inventory level and the remaining lifetimes of items in stock. We derive the expressions for the key operating characteristics of a lost sales perishable inventory model, operating under the proposed age-based policy, and examine the sensitivity of the optimal policy parameters with respect to various system parameters. We compare the performance of the suggested policy to that of the classical (Q,r) type policy through a numerical study over a wide range of system parameters. Our findings indicate that the age-based policy is superior to the stock level policy for slow moving perishable inventory systems with high service levels.     

A modified (S − 1, S) inventory system for deteriorating items with Poisson demand and non-zero lead time

An inventory system is considered for continuous decaying items with non-zero lead time and stochastic demand when shortages are allowed and all unsatisfied demands are backlogged. In this research we consider orders as separate packages where replenishment is one-for-one and a modified base stock policy is applied. In this paper, a penalty cost is introduced for stochastic inventory models with decaying items when less than one unit of the product is delivered to the customers. The objective of the warehouse is to maximize his average profit. Since the concavity analysis of the model is extremely complicated, an upper bound is introduced and an algorithm is presented for finding the optimal solution. Finally, a numerical example is presented and sensitivity analysis is carried out for a number of important parameters.     

Controlling inventories with stochastic item returns: A basic model

Environmental legislation and customer expectations increasingly force manufacturers to take back their products after use. Returned products may enter the production process again as input resources. Material management has to be modified accordingly.One of the areas concerned is inventory management. The present paper provides a step towards a systematic analysis of inventory control in the context of reuse. A basic inventory model is presented comprising Poisson demand and returns. For this model, an optimal control policy is derived and optimal control parameters are computed. Moreover, a numerical analysis is provided of the impact of the return-flow on the inventory system. Comparison with traditional (s,Q)-inventory models is central throughout the analysis.     

An EOQ Model for Deteriorating Items with Linear Time-dependent Demand Rate and Shortages under Inflation and Time Discounting

An economic order quantity (EOQ) inventory model for deteriorating goods is developed with a linear, positive trend in demand allowing inventory shortages and backlogging. The effects of inflation and the time-value of money are incorporated into the model, considering two separate inflation rates: namely, the internal (company) inflation rate and the external (general economy) inflation rate. It is assumed that the goods in the inventory deteriorate over time at a constant rate θ. The inventory policy is discussed over a finite time-horizon with several reorder points. The results are discussed with a numerical example and a sensitivity analysis of the optimal solution with respect to the parameters of the system is carried out. Several particular cases of the model are discussed in brief.     

Optimal ordering policies for perishable multi-item under stock-dependent demand and two-level trade credit

In this paper, a multi-item inventory model for perishable items is developed, where the demand rates of the items are stock dependent, two-level trade credit is adopted and the restriction of inventory capacity is also considered. The major objective is to determine the optimal cycle time and order quantities such that the total profit is maximized. The existence and uniqueness of the optimal cycle is discussed by Lagrange approach, and line search algorithms are developed to find the optimal solution of the model. Furthermore, numerical examples are given to illustrate the methods. The sensitivity of the solution to changes in the values of different parameters is also discussed.     

IMPUTING MISSING NATURAL RESOURCE INVENTORY DATA AND THE BOOTSTRAP

Gathering information on natural resource inventories is expensive, but lack of data inhibits resource sector modeling and policy analysis. Most work has focused on drawing broader inventory estimates from small survey samples. Other studies have used simple forward forecasting equations to project missing values. This research develops a method to impute missing inventory and growth observations when annual survey observations are not available. A one-way error component model is estimated and missing inventory values are imputed using an optimally weighted combination of forward and backward projections. This method ensures conformity of imputed observations with beginning and ending inventories. Confidence intervals for imputed inventory estimates are formed using the bootstrap method. Empirical results for estimated softwood and hardwood inventories in Louisiana are presented.     

Economic selection of process mean for single-vendor single-buyer supply chain

Process mean selection for a container-filling process is an important decision in a single-vendor single-buyer supply chain. Since the process mean determines the vendor’s conforming and yield rates, it influences the vendor–buyer decisions regarding the production lot size and number of shipments delivered from the vendor to buyer. It follows, therefore, that these decisions should be determined simultaneously in order to control the supply chain total cost. In this paper, we develop a model that integrates the single-vendor single-buyer problem with the process mean selection problem. This integrated model allows the vendor to deliver the produced lot to buyer in number of unequal-sized shipments. Moreover, every outgoing item is inspected, and each item failing to meet a lower specification limit is reprocessed. Further, in order to study the benefits of using this integrated model, two baseline cases are developed. The first of which considers a hierarchical model where the vendor determines the process mean and schedules of production and shipment separately. This hierarchical model is used to show the impact of integrating the process mean selection with production/inventory decisions. The other baseline case is studied in the sensitivity analysis where the optimal solution for a given process is compared to the optimal solution when the variation in the process output is negligible. The integrated model is expected to lead to reduction in reprocessing cost, minimal loss to customer due to the deviation from the optimum target value, and consequently, providing better products at reduced cost for customers. Also, a solution procedure is devised to find the optimal solution for the proposed model and sensitivity analysis is conducted to investigate the effect of the model key parameters on the optimal solution.     

Integrated inventory and inspection policies for stochastic demand

In this paper, we develop integrated inventory inspection models with and without replacement of nonconforming items. Inspection policies include no inspection, sampling inspection, and 100% inspection. We consider a buyer who places an order from a supplier when his inventory level drops to a certain point, due to demand which is stochastic in nature. When a lot is received, the buyer uses some type of inspection policy. The fraction nonconforming is assumed to be a random variable following a beta distribution. The order quantity, reorder point and the inspection policy are decision variables. In the inspection policy involving determining sampling plan parameters, constraints on the buyer and manufacturer risks is set in order to obtain a fair plan for both parties. A solution procedure for determining the operating policies for inventory and inspection consisting of order quantity, sample size, and acceptance number is proposed. Numerical examples are presented to conduct a sensitivity analysis for important model parameters and to illustrate important issues about the developed models.     

带有提前购买价格折扣的易逝品库存模型

经典Newsboy模型是在购买价格不变的情形下去确定最优进货批量．然而,对于一些具有特定的消费时间的商品（如中秋节的月饼等）,生产厂家为了更好地安排生产,通常提供提前购买价格折扣．这样确定何时进货、进多少货的问题对经销商来说就显得非常重要．本文研究了该问题,并建立了带有提前购买价格折扣的易逝品的一个库存模型,同时也给出了应用实例与参数的灵敏度分析．     

An optimal replenishment policy for deteriorating items with stock-dependent demand and relaxed terminal conditions under limited storage space

This paper deals with the problem of determining the optimal replenishment policy for deteriorating items with stock-dependent demand in which the terminal condition of zero-ending inventory is relaxed. In the model, shortages are allowed and partial backlogging/lost sales. That is, the zero/non-zero ending inventory models are considered simultaneously. The items in stock are displayed to the customers in shelves with limited storage capacity. In theoretical analysis, the necessary and sufficient conditions of the existence and uniqueness of the optimal solutions under various cases are shown. We then also provide a simple algorithm to find the optimal solutions for various situations. Further, a couple of numerical examples are presented to demonstrate the developed model and solution procedure, and several management insights are obtained from the numerical examples. Finally, sensitivity analysis of the optimal solution with respect to major parameters is also carried out.     

A non-cooperative game model for managing a multiple-aged expiring inventory under consumers' heterogeneity to price and time

The considered inventory system includes the coexistence of old and new types belonging to an identical product. A non-cooperative game approach between the retailer and the market, where the retailer aims to increase her profit, is developed. The market, on the other hand, may seek different objectives. In particular, the objectives of price minimization, freshness maximization, and maximization of the quantity on shelf are analyzed. The main objectives are to develop a model of a multiple-aged inventory system and to specify the conditions under which multiple types on the shelf are not beneficial to either the retailer or the market. Using an analytic optimization approach, the optimal response functions of the two players are derived, while with the aid of numerical iterations, the non-cooperative game Nash equilibrium is obtained. The main theoretical result indicates that selling an inventory that simultaneously holds multiple ages is not optimal; that is, both the retailer and consumers lose out from such a situation. This conclusion is general enough to be valid for a market that is heterogeneous with respect to both price sensitivity and sensitivity to the remaining time until expiration. A numerical example and a sensitivity analysis of the key parameters support the conclusions and highlight their importance.     

Comparing improvement strategies for inventory inaccuracy in a two-echelon supply chain

Classical inventory theory often assumes no discrepancies between recorded inventory and actual inventory. However, inventory records are usually inaccurate due to many reasons in practice. For example, inventory shrinkage refers to the difference between booked inventory that a company should have as a result of its sales, purchasing, and manufacturing processes and actual inventory that it has on hand. This paper concerns the impact of inventory shrinkage to a supply chain and investigates different strategies to deal with inventory shrinkage. We consider a single-period two-echelon supply chain consisting of a Stackelberg manufacturer and a retailer whose inventory is subject to shrinkage errors. Our analysis is based on a single-period newsvendor model and considers the following cases of order decisions: (a) the retailer ignores the inventory errors; (b) the retailer estimates the errors; (c) the retailer shares the inventory error information with the manufacturer; and (d) RFID technology is used to reduce or eliminate the errors. The first case is the base strategy and a common practice for many supply chains, the other two represent certain non-technological strategies of the retailer when dealing with inventory inaccuracy, and the last one represents a technology improvement strategy by the manufacturer to reduce or eliminate inventory shrinkage errors. We compare these improvement strategies and derive critical tag price for RFID implementation as a technological remedy for the inventory inaccuracy problem. Conditions for the profitability of RFID adoption are discussed.