Optimization of technology parameters for the plane-strain component in the process of gas quenching

The paper introduces an optimization method for the technology parameters of the plane-strain component in the process of gas quenching. Distortion, residual stress, average surface hardness and standard deviation of surface hardness are regarded as the optimization objectives. A new heat transfer coefficient model is presented, five distinct heat transfer coefficients are used at various regions of the model. The five heat transfer coefficients are regarded as the design variables, and four regressive equations are established by using response surface method. The four equations, respectively represent the relations between the four optimization objectives and the design variables. A multi-objectives optimization model is established, and the multi-objectives optimization model is optimized by the non-linear method. The optimized technology parameters are used to simulate the gas quenching process by FEM software. The quenching results after optimization are compared with those before optimization. The comparison shows that the quenching quality after optimization is better than that before optimization. After optimization, the four optimization objectives are all improved.     

Necessary Optimality Conditions and New Optimization Methods for Cubic Polynomial Optimization Problems with Mixed Variables

Multivariate cubic polynomial optimization problems, as a special case of the general polynomial optimization, have a lot of practical applications in real world. In this paper, some necessary local optimality conditions and some necessary global optimality conditions for cubic polynomial optimization problems with mixed variables are established. Then some local optimization methods, including weakly local optimization methods for general problems with mixed variables and strongly local optimization methods for cubic polynomial optimization problems with mixed variables, are proposed by exploiting these necessary local optimality conditions and necessary global optimality conditions. A global optimization method is proposed for cubic polynomial optimization problems by combining these local optimization methods together with some auxiliary functions. Some numerical examples are also given to illustrate that these approaches are very efficient.     

线性约束三次规划问题的全局最优性必要条件和最优化算法

讨论了带线性不等式约束三次规划问题的最优性条件和最优化算法. 首先, 讨论了带有线性不等式约束三次规划问题的 全局最优性必要条件. 然后, 利用全局最优性必要条件, 设计了解线性约束三次规划问题的一个新的局部最优化算法(强局部最优化算法). 再利用辅助函数和所给出的新的局部最优化算法, 设计了带有线性不等式约束三 规划问题的全局最优化算法. 最后, 数值算例说明给出的最优化算法是可行的、有效的.     

哈明距离下的网络逆问题研究综述

逆优化问题研究的是如何改变原问题中的权参数,使得某些给定的解是问题在新的权参数下的最优解,且使总的改造费用尽可能少.作为逆优化问题中相对较新的一个分支,哈明距离下的网络逆问题具有较大的理论研究及实际应用价值.此文首先介绍了逆优化问题和哈明距离下的网络逆问题以及它们的应用,然后详细介绍了哈明距离下的网络逆问题的研究动态及使用的研究方法.最后给出了该领域中的一些值得研究的问题.     

A critical review of discrete filled function methods in solving nonlinear discrete optimization problems

Many real life problems can be modeled as nonlinear discrete optimization problems. Such problems often have multiple local minima and thus require global optimization methods. Due to high complexity of these problems, heuristic based global optimization techniques are usually required when solving large scale discrete optimization or mixed discrete optimization problems. One of the more recent global optimization tools is known as the discrete filled function method. Nine variations of the discrete filled function method in literature are identified and a review on theoretical properties of each method is given. Some of the most promising filled functions are tested on various benchmark problems. Numerical results are given for comparison.     

On Efficient Solutions in Vector Optimization

A new characterization is obtained for the existence of an efficient solution of a vector optimization problem in terms of associated scalar optimization problems. The consequences for linear vector optimization problems are derived as a special case, Applications to convex vector optimization problems are also discussed.     

超越方程的优化解法

针对粒子群算法局部搜索能力差,后期收敛速度慢等缺点,提出了一种改进的粒子群算法,该算法是在粒子群算法后期加入拟牛顿方法,充分发挥了粒子群算法的全局搜索性和拟牛顿法的局部精细搜索性,从而克服了粒子群算法的不足,把超越方程转化为函数优化的问题,利用该算法求解,数值实验结果表明,算法有较高的收敛速度和求解精度。     

A rolling window optimization method for large-scale WCDMA base stations planning problem

The large-scale base station planning problem for wideband code division multiple access (WCDMA) wireless networks is studied in this paper. A new rolling window optimization method is presented, where the global optimization problem is decomposed into small optimization sub-problems, which are defined on a series of successive rolling windows. Effective rolling strategies are designed in the rolling optimization method based on the prediction of the interference among the base stations in the WCDMA wireless network. We show that the proposed method has the property that the global objective is non-increasing in the successive optimization procedure. Simulations are carried out to analyze the performance of the proposed optimization method, which show the importance of the rolling strategy.     

向量优化问题的对偶性(英文)

Duality framework on vector optimization problems in a locally convex topological vector space are established by using scalarization with a cone-strongly increasing function.The dualities for the scalar convex composed optimization problems and for general vector optimization problems are studied.A general approach for studying duality in vector optimization problems is presented.     

路灯安置优化问题研究

首先分析了路灯照明强度特性 ,然后建立了一盏路灯、两盏路灯、一排路灯以及街道两边路灯的优化模型 .采用 Monte Carlo法求解复杂方程确定的面积 ,用黄金分割法和坐标轮换法解决了两盏路灯优化问题 .用 MATLAB优化工具箱解决一排路灯以及街道两边路灯的优化模型 .     

Bio-inspired optimization of fuzzy logic controllers for robotic autonomous systems with PSO and ACO

In this paper we describe the use of bio-inspired optimization techniques, such as ant colony optimization and particle swarm optimization, for the design of optimal fuzzy logic controllers of autonomous wheeled mobile robots. The results obtained by the simulations with ant colony optimization and particle swarm optimization are statistically compared with previous optimization results obtained with genetic algorithms in order to find out the best optimization technique for a particular robotics problem.     

Towards global bilevel dynamic optimization

The global solution of bilevel dynamic optimization problems is discussed. An overview of a deterministic algorithm for bilevel programs with nonconvex functions participating is given, followed by a summary of deterministic algorithms for the global solution of optimization problems with nonlinear ordinary differential equations embedded. Improved formulations for scenario-integrated optimization are proposed as bilevel dynamic optimization problems. Solution procedures for some of the problems are given, while for others open challenges are discussed. Illustrative examples are given.     

Robustness to uncertain optimization using scalarization techniques and relations to multiobjective optimization

In this paper, we propose two kinds of robustness concepts by virtue of the scalarization techniques (Benson’s method and elastic constraint method) in multiobjective optimization, which can be characterized as special cases of a general non-linear scalarizing approach. Moreover, we introduce both constrained and unconstrained multiobjective optimization problems and discuss their relations to scalar robust optimization problems. Particularly, optimal solutions of scalar robust optimization problems are weakly efficient solutions for the unconstrained multiobjective optimization problem, and these solutions are efficient under uniqueness assumptions. Two examples are employed to illustrate those results. Finally, the connections between robustness concepts and risk measures in investment decision problems are also revealed.     

Characterizations of set order relations and constrained set optimization problems via oriented distance function

Set-valued optimization problems are important and fascinating field of optimization theory and widely applied to image processing, viability theory, optimal control and mathematical economics. There are two types of criteria of solutions for the set-valued optimization problems: the vector criterion and the set criterion. In this paper, we adopt the set criterion to study the optimality conditions of constrained set-valued optimization problems. We first present some characterizations of various set order relations using the classical oriented distance function without involving the nonempty interior assumption on the ordered cones. Then using the characterizations of set order relations, necessary and sufficient conditions are derived for four types of optimal solutions of constrained set optimization problem with respect to the set order relations. Finally, the image space analysis is employed to study the c-optimal solution of constrained set optimization problems, and then optimality conditions and an alternative result for the constrained set optimization problem are established by the classical oriented distance function.     

Stability of Local Efficiency in Multiobjective Optimization

Analyzing the behavior and stability properties of a local optimum in an optimization problem, when small perturbations are added to the objective functions, are important considerations in optimization. The tilt stability of a local minimum in a scalar optimization problem is a well-studied concept in optimization which is a version of the Lipschitzian stability condition for a local minimum. In this paper, we define a new concept of stability pertinent to the study of multiobjective optimization problems. We prove that our new concept of stability is equivalent to tilt stability when scalar optimizations are available. We then use our new notions of stability to establish new necessary and sufficient conditions on when strict locally efficient solutions of a multiobjective optimization problem will have small changes when correspondingly small perturbations are added to the objective functions.     

Well-posedness for set optimization problems

In this paper, three kinds of well-posedness for set optimization are first introduced. By virtue of a generalized Gerstewitz’s function, the equivalent relations between the three kinds of well-posedness and the well-posedness of three kinds of scalar optimization problems are established, respectively. Then, sufficient and necessary conditions of well-posedness for set optimization problems are obtained by using a generalized forcing function, respectively. Finally, various criteria and characterizations of well-posedness are given for set optimization problems.     

鲁棒投资组合选择优化问题的研究进展

对近年来投资组合研究优化研究的热点问题——鲁棒投资组合优化研究的现状和发展趋势作了综述性研究．在投资组合选择优化的均值-方差模型的基础上,回顾了鲁棒投资组合选择优化问题的发展历史;详细地介绍了鲁棒投资组合选择优化的研究热点及国内外研究现状,就鲁棒投资组合选择优化问题的未来发展方向和主要研究内容,提出了新的观点,以期为相关领域的研究工作提供参考依据．     

一类广义凸多目标规划问题研究

首先引入了涉及高阶强Pre-invex函数的多目标优化问题m阶严格局部极小元的定义,在此基础上讨论了多目标优化问题的优化条件,最后研究了变分不等式的解与多目标优化问题高阶严格极小元之间的关系,其变分不等式的解正是多目标优化问题的高阶严格极小元,这些研究内容推广了Guneer-Bhatia给出的相关结论.     

Hybrid optimization procedure applied to optimal location finding for piezoelectric actuators and sensors for active vibration control

This paper presents an efficient hybrid optimization approach using a new coupling technique for solving the constrained optimization problems. This methodology is based on genetic algorithm, sequential quadratic programming and particle swarm optimization combined with a projected gradient techniques in order to correct the solutions out of domain and send them to the domain’s border. The established procedures have been successfully tested with some well known mathematical and engineering optimization problems, also the obtained results are compared with the existing approaches. It is clearly demonstrated that the solutions obtained by the proposed approach are superior to those of existing best solutions reported in the literature. The main application of this procedure is the location optimization of piezoelectric sensors and actuators for active control, the vibration of plates with some piezoelectric patches is considered. Optimization criteria ensuring good observability and controllability based on some main eigenmodes and residual ones are considered. Various rectangular piezoelectric actuators and sensors are used and two optimization variables are considered for each piezoelectric device: the location of its center and shape orientation. The applicability and effectiveness of the present methodological approach are demonstrated and the location optimization of multiple sensors and actuators are successfully obtained with some main modes and residual ones. The shape orientation optimization of sensors observing various modes as well as the local optimization of multiple sensors and actuators are numerically investigated. The effect of residual modes and the spillover reduction can be easily analyzed for a large number of modes and multiple actuators and sensors.     

Scope of stationary multi-objective evolutionary optimization: a case study on a hydro-thermal power dispatch problem

Many engineering design and developmental activities finally resort to an optimization task which must be solved to get an efficient and often an intelligent solution. Due to various complexities involved with objective functions, constraints, and decision variables, optimization problems are often not adequately suitable to be solved using classical point-by-point methodologies. Evolutionary optimization procedures use a population of solutions and stochastic update operators in an iteration in a manner so as to constitute a flexible search procedure thereby demonstrating promise to such difficult and practical problem-solving tasks. In this paper, we illustrate the power of evolutionary optimization algorithms in handling different kinds of optimization tasks on a hydro-thermal power dispatch optimization problem: (i) dealing with non-linear, non-differentiable objectives and constraints, (ii) dealing with more than one objectives and constraints, (iii) dealing with uncertainties in decision variables and other problem parameters, and (iv) dealing with a large number (more than 1,000) variables. The results on the static power dispatch optimization problem are compared with that reported in an existing simulated annealing based optimization procedure on a 24-variable version of the problem and new solutions are found to dominate the solutions of the existing study. Importantly, solutions found by our approach are found to satisfy theoretical Kuhn–Tucker optimality conditions by using the subdifferentials to handle non-differentiable objectives. This systematic and detail study demonstrates that evolutionary optimization procedures are not only flexible and scalable to large-scale optimization problems, but are also potentially efficient in finding theoretical optimal solutions for difficult real-world optimization problems. Kalyanmoy Deb, Deva Raj Chair Professor. Currently a Finland Distinguished Professor, Department of Business Technology, Helsinki School of Economics, 00101 Helsinki, Finland.