Electron microscopy of pharmaceutical systems

During the last decades, the focus of research in pharmaceutical technology has steadily shifted towards the development and optimisation of nano-scale drug delivery systems. As a result, electron microscopic methods are increasingly employed for the characterisation of pharmaceutical systems such as nanoparticles and microparticles, nanoemulsions, microemulsions, solid lipid nanoparticles, different types of vesicles, nanofibres and many more. Knowledge of the basic properties of these systems is essential for an adequate microscopic analysis. Classical transmission and scanning electron microscopic techniques frequently have to be adapted for an accurate analysis of formulation morphology, especially in case of hydrated colloidal systems. Specific techniques such as environmental scanning microscopy or cryo preparation are required for their investigation. Analytical electron microscopic techniques such as electron energy-loss spectroscopy or energy-dispersive X-ray spectroscopy are additional assets to determine the elemental composition of the systems, but are not yet standard tools in pharmaceutical research. This review provides an overview of pharmaceutical systems of interest in current research and strategies for their successful electron microscopic analysis. Advantages and limitations of the different methodological approaches are discussed and recent findings of interest are presented.     

Self-assembly of rutile (α-TiO<Subscript>2</Subscript>) nanoclusters into nanorods in microemulsions at low temperature and their photocatalytic performance

A novel method – inverse microemulsion has been developed not only for synthesizing low cost TiO₂ nanocrystals but also for the first time making these nanocrystals self-assemble into various nanoparticles at 85°C. By variation of the volume ratios of oil to water in reverse microemulsions, the morphologies of obtained samples turned from nanoclusters to nanospherules, then grew into nanodumbbells, and became nanorods at last. It could be observed by transmission electron microscope (TEM) directly. The resulting materials were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and high-resolution transmission electron microscope (HRTEM). The photocatalytic activity of TiO₂ was tested with photodegradation of Methyl Orange (MO) in water. The catalyst consisting of nanorods showed the highest photocatalytic activity, which is due to its large surface area. Furthermore, the mechanism of self-assembly of TiO₂ nanocrystals was discussed in detail.     

KZnF3:Ce3+,Tb3+纳米粒子合成与发光

采用微乳液法合成了Ce3 ,Tb3 单掺和双掺KZnF3纳米晶。分析了样品的结构与形态,结果表明,所合成的样品均为单相,颗粒粒度分布均匀。讨论了光谱特性,并与高温固相法合成的产物作了对比。研究发现,KZnF3:Ce3 纳米晶的发射光谱与体相多晶相比,最强峰位置红移约35nm;在KZnF3纳米晶双掺体系中存在Ce3 →Tb3 能量传递,尤其是Tb3 的5D4→7F5跃迁发射显著增强,有望成为一种有发展前途的绿色荧光材料。     

Field emission scanning electron microscopy (FE-SEM) as an approach for nanoparticle detection inside cells

When developing new nanoparticles for bio-applications, it is important to fully characterize the nanoparticle's behavior in biological systems. The most common techniques employed for mapping nanoparticles inside cells include transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). These techniques entail passing an electron beam through a thin specimen. STEM or TEM imaging is often used for the detection of nanoparticles inside cellular organelles. However, lengthy sample preparation is required (i.e., fixation, dehydration, drying, resin embedding, and cutting). In the present work, a new matrix (FTO glass) for biological samples was used and characterized by field emission scanning electron microscopy (FE-SEM) to generate images comparable to those obtained by TEM. Using FE-SEM, nanoparticle images were acquired inside endo/lysosomes without disruption of the cellular shape. Furthermore, the initial steps of nanoparticle incorporation into the cells were captured. In addition, the conductive FTO glass endowed the sample with high stability under the required accelerating voltage. Owing to these features of the sample, further analyses could be performed (material contrast and energy-dispersive X-ray spectroscopy (EDS)), which confirmed the presence of nanoparticles inside the cells. The results showed that FE-SEM can enable detailed characterization of nanoparticles in endosomes without the need for contrast staining or metal coating of the sample. Images showing the intracellular distribution of nanoparticles together with cellular morphology can give important information on the biocompatibility and demonstrate the potential of nanoparticle utilization in medicine.     

Synthesis of ZnO nanoparticles using nanosecond pulsed laser ablation in aqueous media and their self-assembly towards spindle-like ZnO aggregates

ZnO nanoparticles were fabricated by pulsed laser ablation (PLA) of a Zn metal in aqueous media, and aging effects on the morphology and photoluminescence properties of ZnO nanoparticles were investigated. The crystalline phase and particle morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that small, well-defined ZnO nanoparticles were obtained by PLA of a Zn plate in aqueous media, and subsequent aging of the obtained ZnO nanoparticle suspension produced in cetyltrimethylammonium bromide (CTAB) solution led to the formation of spindle-like ZnO aggregates. However, in deionized water not the spindle-like ZnO aggregates but fluffy round aggregates were obtained. High-resolution transmission electron microscopic (HRTEM) observation indicated that the spindle-like ZnO aggregates were composed of many well-defined nanoparticles. Spindle-like aggregates exhibited strong exciton emission, while green emission could be suppressed via an aging process in the presence of CTAB. Moreover, thin films prepared by electrophoretic deposition (EPD) of ZnO nanoparticles after PLA in the presence of CTAB also possessed highly elongated aggregate structures that were possibly formed by surrounding the ZnO nanoparticles with double layers of CTAB molecules.     

UV-Visible Photoluminescence of TiO2 Nanoparticles Prepared by Hydrothermal Method

TiO₂ colloidal nanoparticles and nanocrystals are prepared by hydrolysis of titanium isopropoxide employing a surfactant-free synthetic hydrothermal method. The synthesized samples are characterized by X-ray diffraction (XRD), HRTEM and FTIR. The XRD study confirms that the size of the colloidal nanoparticle is around 4?nm which the HRTEM analysis indicates the sizes of the colloidal nanoparticles are in the range of 2.5?nm. The fluorescence property of the TiO₂ colloidal nanoparticles studied by the emission spectrum confirms the presence of defect levels caused by the oxygen vacancies. We have observed new emission bands at 387?nm,421?nm, 485?nm, 530?nm and 574?nm wavelengths, first one (387?nm) being emission due to annihilation of excitons while remaining four could be arising from surface states. The emission spectrum of annealed nanocrystallites is also having these four band emissions. It is observed that the surface state emission basically consists of two categories of emission.     

火焰喷雾法合成ZnO和MgxZn1－xO纳米颗粒的光学性能研究

利用火焰喷雾法成功制备了纳米级的ZnO和Mg_xZn_1-xO颗粒. 通过对样品的X射线衍射谱和场发射扫描电子显微镜照片分析，发现制备的颗粒大小较为均匀，直径在20nm左右；镁元素的掺入引起晶格常数变小. 通过透射光谱和光致发光谱的测量，发现Mg_xZn_1-xO颗粒的禁带宽度远大于ZnO颗粒的禁带宽度，同时对两组样品的紫外发光和可见发光的强度变化和发光机理进行了探讨. 关键词： 火焰喷雾 ZnO 禁带宽度 纳米颗粒     

Structural and cathodoluminiscent properties of Zr0.95Ce0.05O2 nanopowders prepared by sol-gel and template methods

Nanopowders of Zr_0.95Ce_0.05O₂ composition have been prepared by a standard Pechini-type sol-gel process and by means of a colloidal crystal template approach. In the latter method, inverse opal Zr_0.95Ce_0.05O₂ powders were fabricated employing poly(methyl methacrylate) (PMMA) colloidal crystals as a template. The effects of the two different synthesis routes on the structure and microstructural characteristics of the prepared nanopowders were evaluated by X-ray diffraction and scanning electron microscopy. For both preparation routes, the X-ray diffraction analysis has shown that a tetragonal fluorite structure is formed with a crystallite size of ∼35-40 nm. The scanning electron microscopy measurements indicate that the powder obtained by the sol-gel Pechini-type process is comprised of nanoparticles that are arranged in agglomerates with shape and size relatively uniform whereas the inverse opal Zr_0.95Ce_0.05O₂ nanopowders exhibit the formation of macropores with a mean size of ∼100 nm. The cathodoluminescence spectra of the prepared Zr_0.95Ce_0.05O₂ nanomaterials have been measured in the 300-800 nm wavelength range. The powder prepared by sol-gel method yields a broad emission band centered at 482 nm whereas the emission from the inverse opal preparation is considerably less intense.     

A novel method for synthesis of colloidal silver nanoparticles by arc discharge in liquid

This paper presents a novel, inexpensive and one-step approach for synthesis of silver nanoparticles (Ag NPs) using arc discharge between titanium electrodes in AgNO₃ solution. The resulting nanoparticles were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Silver nanoparticles of 18 nm diameter were formed during reduction of AgNO₃ in plasma discharge zone. Optical absorption spectroscopy of as prepared samples at 15 A arc current in AgNO₃ solution shows a surface plasmon resonance around 410 nm. It was found that sodium citrate acts as a stabilizer and surface capping agent of the colloidal nanoparticles. SEM images exhibit the increase of reduced nanoparticles in 6 min arc duration compared with 1 min arc duration. TEM image of the sample prepared at 6 min arc duration shows narrow size distribution with 18 nm mean particle size. Antibacterial activities of silver nanoparticles were investigated at the presence of Escherichia coli (E-coli) bacteria.     

La3PO7:Eu3+纳米晶的制备和光谱性质

通过燃烧法合成了Eu³⁺掺杂的含氧磷酸镧(La₃PO₇:Eu³⁺)纳米晶颗粒材料。样品的结构、形貌和粒径分别由X射线衍射、扫描电镜和透射电子显微镜得到。测量了样品的发射光谱、激光选择激发光谱和时间分辨光谱。实验结果表明:样品展示的较强红光发射来自于Eu³⁺ 的⁵D₀→⁷F₂辐射跃迁,Eu³⁺在La₃PO₇基质中至少占据两种不同的格位,且具有较低的格位对称性。     

One-pot synthesis and optical properties of monodisperse ZnSe colloidal microspheres

Monodisperse ZnSe colloidal microspheres were fabricated by a green one-pot wet chemical strategy through aggregation of primary nanoparticles without expensive organic additives or reductants involved. The as-prepared products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectrum, X-ray photoelectron spectroscopy (XPS), UV–vis absorption and room-temperature photoluminescence techniques. The size-dependent optical spectra of as-obtained microspheres were blue-shifted in comparison with that of bulk ZnSe and exhibit near band edge luminescence, indicating the quantum confinement effect. The strong and stable blue emission band from the ZnSe colloidal microspheres indicates their potential applications as building blocks in photonic crystals.     

Synthesis and magnetic properties of barium–calcium hexaferrite particles prepared by sol–gel and microemulsion techniques

The preparation of W-type hexaferrite particles with the composition BaCa₂Fe₁₆O₂₇ by microemulsion and a stearic acid sol–gel method with and without surfactant has been investigated at various sintering temperatures. The structural and magnetic characteristics have been studied by X-ray diffraction (XRD), a vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetric (DSC) and Fourier transform infrared (FTIR) techniques. The effect of sintering temperature on the properties of BaCa₂Fe₁₆O₂₇ hexaferrites has been studied. The value of saturation magnetization (M_s) depends on types of surfactant used. The sample prepared in the presence of polyoxyethylene (20) sorbitan monooleat (Tween 80) shows low saturation magnetization (M_s=15.10 emu/g), whereas the other sample prepared in the presence of a surfactant cetyltrimethylammonium bromide (CTAB) exhibits high saturation magnetization (M_s=24.60 emu/g) compared to the normal sample.     

Observation of Undamped 3D Brownian Motion of Nanoparticles Using Liquid-Cell Scanning Transmission Electron Microscopy

In theory, liquid-cell (scanning) transmission electron microscopy (LC(S)TEM) is the ideal method to measure 3D diffusion of nanoparticles (NPs) on a single particle level, beyond the capabilities of optical methods. However, particle diffusion experiments have been especially hard to explain in LC(S)TEM as the observed motion thus far has been slower than theoretical predictions by 3–8 orders of magnitude due to electron beam effects. Here, direct experimental evidence of undamped diffusion for two systems is shown; charge-neutral 77 nm gold nanoparticles in glycerol and negatively charged 350 nm titania particles in glycerol carbonate. The high viscosities of the used media and a low electron dose rate allow observation of Brownian motion that is not significantly altered by the electron beam. The resulting diffusion coefficient agrees excellently with a theoretical value assuming free diffusion. It is confirmed that the particles are also moving in the direction parallel to the electron beam by simulating STEM images using Monte Carlo simulations. Simulations and experiments show blurring of the particles when these move out of focus. These results make clear that direct observation of 3D diffusion of NPs is possible, which is of critical importance for the study of interparticle interactions or in situ colloidal self-assembly using LC(S)TEM.     

Photoluminescence characteristics of neodymium oxide nanocrystal/titania/ormosil composite sol-gel thin films

Neodymium (III) oxide nanocrystal/titania/organically-modified silane (ormosil) composite thin films have been prepared using a chemical approach consisting of a combination of inverse microemulsion and sol-gel techniques at low temperature. Transmission electron microscopy shows that the neodymium (III) oxide nanoparticles have a needle-like nanocrystal structure. A strong room temperature emission at 1064 nm, corresponding to the ⁴ F _3/2?⁴ I _11/2 transition, has been observed as a function of the heat treatment temperature used for the production of the composite thin films. In addition to this emission, two other main emissions at 890 nm and at 1336 nm have also been observed. In particular, there was a clear shoulder peak at 1145 nm, probably be due to the host matrix, which was observed in all the measured samples and this shoulder peak gave a maximum intensity after heat treatment at 300 °C. Received: 6 September 2000 / Accepted: 15 November 2000 / Published online: 20 June 2001     

Structural, optical, and electronic properties of colloidal CuO nanoparticles formed by using a colloid-thermal synthesis process

Colloidal cupric oxide (CuO) nanoparticles were formed by using a colloid-thermal synthesis process. X-ray diffraction patterns, transmission electron microscopy (TEM) images, high-resolution TEM images, and X-ray energy dispersive spectrometry profiles showed that the colloidal CuO nanoparticles were formed. The optical band-gap energy of CuO nanoparticles at 300 K, as determined from the absorbance spectrum, was 3.63 eV. A photoluminescence spectrum at 300 K showed that a dominant emission peak appeared at the blue region. X-ray photoelectron spectroscopy profiles showed that the O 1s and the Cu 2p peaks corresponding to the CuO nanoparticles were observed.     

Low temperature synthesis of fluorescent ZnO nanoparticles

Fluorescent ZnO nanoparticles have been prepared by mixing aqueous solutions of zinc nitrate and ammonium carbonate in the presence of a non-ionic surfactant, Tween-80. Increased concentrations of the surfactant were found to affect both the morphology and purity of the synthesized ZnO nanoparticles. XRD, SEM, FTIR, TGA and Confocal laser scanning microscopy were employed to characterize the as-prepared samples. ZnO nanoparticles ranging in particle size from 11 to 15 nm were formed at the reaction temperature of 70-80 °C. The results of FTIR and TGA analysis indicate the self assembly of Tween molecules on the surface of ZnO nanoparticles. A bright emission in the visible region from the as-prepared ZnO nanoparticles was recorded using confocal laser scanning microscopy. This property of the as-prepared nanoparticles may find potential application in bio-imaging.     

In situ Electron Microscopy Investigation of Fe(III)-doped TiO2 Nanoparticles in an Aqueous Environment

Three-dimensional networks of Fe(III)-doped TiO₂ nanoparticles (2–4 nm) prepared from organic precursors are detected by Cryo-TEM (transmission electron microscopy) in an aqueous environment. High-resolution TEM studies show that the nanoparticles prefer to align along their crystallographic orientation. A novel energy transfer mechanism is suggested in which these three-dimensional networks act as antenna systems thus leading to an enhanced photocatalytic activity of the colloidal preparations.     

Fabrication of three-dimensional ZnO with hierarchical structure via an electrodeposition process

A novel three-dimensional (3D) hierarchical structured ZnO was prepared on TiO₂ nanoparticles film by electrodeposition process from aqueous ZnCl₂ solution. The hierarchical structured ZnO was observed by scanning electron microscopy. The results showed that the deposition time had an obvious effect on the morphology of the ZnO structures. Accordingly, a possible growth mechanism was proposed. Furthermore, the room-temperature optical properties of hierarchical structured ZnO were investigated by photoluminescence spectrum, indicating that a strong green emission peak centered at 542 nm.     

Sonochemical preparation and characterization of photochromic MoO3 nanoparticles

The effect of ultrasound irradiation on molybdenum trioxide has been investigated. Under ultrasonic irradiation, spherical-like MoO₃ nanoparticles were obtained, while bulk-like MoO₃ nanoparticles were prepared without ultrasonic irradiation. The changes in the physicochemical properties of MoO₃ have been investigated using techniques such as X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet and visible spectroscopy (UV-vis). The physicochemical changes of MoO₃ due to ultrasound irradiation have been attributed to the sonochemical cavity collapse onto the molybdenum trioxide particles. The ultrasonically prepared particles can also greatly improve the photochromism efficiency.      

Structural and spectroscopic studies of thin film of silver nanoparticles

We report the deposition of thin film of silver (Ag) nanoparticles by wet chemical method. The as-synthesized Ag nanoparticles have been characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray energy dispersive spectroscopy (EDS), field emission transmission electron microscopy (FETEM) and high-resolution TEM (HRTEM), UV-vis spectroscopy and thermogravimetric-differential thermal analysis (TG-DTA) respectively. FESEM image indicates that the silver film prepared on the quartz substrate is smooth and dense. XRD pattern reveals the face-centered cubic (fcc) structure of silver nanoparticles. EDS spectrum indicates that samples are nearly stoichiometric. From TEM analysis, it is found that the size of high purity Ag nanoparticles is ranging from 10 to 20 nm with slight agglomeration. Absorption in UV-vis region by these nanoparticles is characterized by the features reported in the literature, namely, a possible Plasmon peak at ∼403 nm. Optical absorbance spectra analysis reveals that the Ag film has an indirect band structure with bandgap energy 3.88 eV. TGA/DTA studies revealed that a considerable weight loss occurs between 175 and 275 °C; and the reaction is exothermic.