Determination of chloramphenicol in muscle using a particle beam interface for combining liquid chromatography with negative-ion chemical ionization mass spectrometry.

A simple and rapid liquid chromatographic-mass spectrometric analysis of chloramphenicol in calf muscle is presented. A particle beam interface was used, with negative-ion chemical ionization mass spectrometry using methane as the reagent gas. The method specificity was tested for three related compounds, dehydrochloramphenicol, nitrosochloramphenicol and nitrophenylaminopropanediol. The extraction procedures require 5 g of muscle, and the quantification limit is 2 micrograms/kg for chloramphenicol. Residues were detected in calf muscle 48 h after intravenous administration of chloramphenicol (25 mg/kg body weight).     

Analysis of coumarins by micro high-performance liquid chromatography-mass spectrometry with a particle beam interface

Coumarins are a large group of compounds that are naturally present in plant tissues and that exhibit a wide range of pharmacological properties. Analytical methods based on chromatographic techniques and conventional detectors are inadequate to accurately analyze coumarins in complex matrices such as plant extracts. In this article a new method based on a modified particle beam liquid chromatography-mass spectrometry interface is described. The method allows specific and accurate determination of several coumarins in biological matrices. An application regarding the analysis of 18 coumarins in the extract of Smyrnium perfoliatum L. is also reported.     

Use of a particle beam interface combined with mass spectrometry/negative chemical ionization to determine polar herbicide residues in soil by liquid chromatography

The use of mass spectrometry/negative chemical ionization (MS/NCI), in combination with selected-ion monitoring, allows sensitive and selective determination of polar and thermally unstable herbicide residues by liquid chromatography coupled to a particle beam interface. The method has been applied to the analysis of soil samples for herbicide residues, using various procedures for their extraction and employing matrix-standard calibration to avoid quantitative errors due to transfer of matter through the interface. Data for the fragment ions found in the MS/NCI procedure and chromatograms from analyses of real samples are also presented.     

Determination of aflatoxins in peanut meal by LC/MS with a particle beam interface

Summary A new method for the analysis of aflatoxins in food extracts, based on liquid chromatography/mass spectrometry interfacing, is presented. The chromatographic separation was performed with a reversed phase packed capillary column coupled with a modified particle beam interface capable of handling microliter per minute flow rates. This system allows higher overall sensitivity and easier operation procedures. The method has proved to be particularly suitable for the analysis of the toxins in very complex matrices. The specificity of electron impact ionization allowed positive identification of the aflatoxins with an excellent response linearity for accurate quantitation.     

Coupling a particle beam interface directly to a quadrupole ion trap mass spectrometer

A particle beam interface has been coupled to a quadrupole ion trap mass spectrometer. The system allows the collection of electron ionization mass spectra from analyte in solution. The interface incorporates a pneumatic nebulizer, a heated desolvation chamber, and a three-stage separator region. Additional helium, for improved performance, is added through stage 3. The particles formed in the interface are separated from solvent molecules and are transferred directly to the ion trap where they are expected to collide with the hot hyperbolic surface of the end cap. The end cap serves both as a heated target used to vaporize the particles and as an ion-trapping electrode. Mass analysis is achieved with the mass-selective instability scan supplemented with resonance ejection. Electron ionization spectra from 100 ng of caffeine [molecular weight (MW) = 1941; 1-naphthalenol methylcarbamate (carbaryl) (MW = 2011, 17α-hydroxyprogesterone (MW = 330), and reserpine (MW = 608) are shown using sampling by a segmented flow analysis. Some charge exchange is evident with methanol as well as self-chemical ionization at higher analyte levels. The interface shows a nonlinear caffeine calibration curve for analyte amounts below 30 ng and a more linear response at higher amounts. Caffeine was detected at 25 pmol (5 ng), with a signal-to-noise ratio of 50, 20-μL loop, full scan.     

Characterization of chromium-carbene complexes by high-performance liquid chromatography-mass spectrometry with particle beam interface

High-performance liquid chromatography (HPLC) coupled with mass spectrometric (MS) detection was used to separate and characterize a series of chromium -aminocarbene and alkoxycarbene complexes of the Fischer type, some of which were synthesized as new compounds. Chromium-carbene complexes are known to have interesting photochemical properties. The separation of all the compounds examined was performed under normal-phase conditions and a particle beam LC-MS interface was used. The acquisition of positive-ion and negative-ion chemical ionization mass spectra of the eluates was performed. The use of the LC-PB-MS system demonstrated the potential role of this technique in the elucidation of the structure of polar organometallic compounds, such as the carbene complexes of chromium examined.     

Liquid chromatographic-mass spectrometric determination of phenolic compounds using a capillary-scale particle beam interface.

A capillary-scale particle beam interface was used to detect 18 phenolic compounds in red wine samples. This technique allows reproducible, library searchable electron ionization spectra at only 1 microliter/min mobile phase flow-rate for a sensitive detection of the analytes in complex matrices. The method makes use of a narrow bore, reversed-phase packed capillary column for sample separation. Detection limits were in the low picogram range for most compounds. Sensitivity and response linearity were evaluated for eight phenolic acids, which are often encountered in red wines. The phenolic compound composition was outlined in two red wines obtained using different aging processes.     

Negative chemical ionization mass spectrometry of explosives

The negative chemical ionization mass spectra of nitrobenzene, ethylene glycol dinitrate and nitroglycerine have been obtained using various reagent ions. For nitrobenzene, [OH]^? gives the [M ? H]^?, together with [M]^?˙ ions formed by electron capture, but other reagent ions gave relatively low intensity adduct peaks. Ethylene glycol dinitrate and nitroglycerine gave abundant [M + X]^? ions (X = NO₂, NO₃, Cl, Br, I), together with ions arising from the thermal decomposition of the samples in the heated inlet system. The rate of anion attachment to these compounds is much greater than that to related compounds having only one functional group, and it is suggested that this is due to the participation of the adjacent groups in the bonding between the substrate and anion.     

Simultaneous determination of beclomethasone, beclomethasone monopropionate and beclomethasone dipropionate in biological fluids using a particle beam interface for combining liquid chromatography with negative-ion chemical ionization mass spectrometry

A new simple and sensitive assay has been developed for the simultaneous quantitative measurement of beclomethasone dipropionate and its hydrolysis products in human plasma and urine. Beclomethasone 17.21-dipropionate, beclomethasone 17-monopropionate, beclomethasone and the internal standard, dexamethasone 21-acetate, were measured by combined liquid chromatography and negative-ion chemical ionization mass spectrometry with methane as the reagent gas. A particle beam interface from Hewlett Packard was used. Under mild operating conditions, abundant and stable characteristic high-mass ions were generated in the ion source of the mass spectrometer by a resonance electron-capture mechanism. The fast extraction procedure requires 1 ml of plasma or urine, and the quantification limit of the method is 1 ng ml-1 for the three tested compounds.     

Electron capture negative ion and positive ion chemical ionization mass spectrometry of polychlorinated phenoxyanisoles

Several polychlorinated phenoxyphenols with three to nine chlorine atoms were examined as their methyl ethers by electron capture negative ion and positive ion chemical ionization and electron impact mass spectrometry. In chemical ionization studies methane, hydrogen, nitrogen, helium and argon were used as reagent gases. Selected compounds were also examined with deuteriomethane, ammonia and deuterioammonia as reagent gases. Utilization of chemical ionization spectra in conjuction with electron impact spectra provides substantial structural information about these compounds. Chemical ionization spectra provide information about chlorine atom substitution. The position of phenoxy substitution can be established from electron capture negative ion and positive ion spectra.     

Electron impact,electron capture negative ionization and positive chemical ionization mass spectra of organophosphorus flame retardants and plasticizers

Phosphate esters are important commercial products that have been used both as flame retardants and as plasticizers. To analyze these compounds by gas chromatographic mass spectrometry, it is important to understand the mass spectra of these compounds using various ionization modes. This paper is a systematic overview of the electron impact (EI), electron capture negative ionization (ECNI) and positive chemical ionization (PCI) mass spectra of 13 organophosphate esters. These data are useful for developing and optimizing analytical measurements. The EI spectra of these 13 compounds are dominated by ions such as H₄PO₄⁺, (M ? Cl)⁺, (M ? CH₂Cl)⁺ or (M)⁺ depending on specific chemical structures. The ECNI spectra are generally dominated by (M ? R)^?. The PCI spectra are mainly dominated by the protonated molecular ion (M + H)⁺. The branching of the alkyl substituents, the halogenation of the substituents and, for aromatic phosphate esters, ortho alkylation of the ring are all significant factors controlling the details of the fragmentation processes. EI provides the best sensitivity for the quantitative measurement of these compounds, but PCI and ECNI both have considerable qualitative selectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Electron capture negative ion mass spectra of some typical matrix-assisted laser desorption/ionization matrices

A series of seven typical matrix-assisted laser desorption/ionization (MALDI) matrices has been investigated by means of electron capture negative ion mass spectrometry (ECNI-MS). It has been shown that the most effective matrices form deprotonated negative ions predominantly in the low-energy region. Relative dissociative cross sections have been measured for all molecules under investigation. The relative integrated abundance of [M - H](-) ion formation in the series changes by four orders of magnitude. It has been shown that 2,5-DHB (gentisic acid), one of the most effective MALDI matrices, has maximal relative intensity of [M - H](-) formation at the energy approximately equal 0.8 eV. This result is in accordance with a finding of Frankevich and Zenobi [Book of Abstracts, Workshop-school "Mass spectrometry in chemical physics, bio-physics and environmental sciences", Zvenigorod, Russia, April, 25-26, 2002, p. 40] that a probable origin of negative ions in MALDI is the process of low-energy (0.5-1 eV) dissociative electron capture by matrix molecules.     

Direct exposure chemical ionization mass spectra of explosives

Mass spectra of explosives, including TNT, tetryl, nitroglycerin, PETN and RDX have been recorded by direct exposure chemical ionization with isobutane as reagent at source temperatures of 50–100°C. The mass spectra contain major [MH]⁺ ions, adduct ions and some fragment ions. The configuration of the relative abundances of these ions has been found to be a function of temperature and source pressure. Maximum [MH]⁺ ion abundance has been obtained at source pressures much lower than normal chemical ionization pressures.     

Comparison of the performances of a particle beam LC-MS interface obtained by standard and modified skimmers

Stainless steel skimmers were made in the technical workshop of our Department and mounted on a commercial Particle Beam interface. Their performances were compared with the standard ones, using three different compounds: benzidine, caffeine and perylene. Library searchable EI spectra were collected with a high quality match and remarkable improvements in the sensitivity were obtained (detection limit of 20 pg for perylene and benzidine), probably due to their better tightness that allowed to widen the skimmer orifices without significantly compromising the ion source vacuum. Also calibration curves showed a good linearity, in the concentration range 10-200 ng/ml.     

Electron ionization in LC-MS: recent developments and applications of the direct-EI LC-MS interface

The purpose of this article is to underline the possibility of efficiently using electron ionization (EI) in liquid chromatography (LC) and mass spectrometry (MS). From a historical perspective, EI accompanied the first attempts in LC-MS but, owing to several technical shortcomings, it was soon outshined by soft, atmospheric pressure ionization (API) techniques. Nowadays, two modern approaches, supersonic molecular beam LC-MS and direct-EI LC-MS, offer a valid alterative to API, and preserve the advantages of EI also in LC-MS applications. These advantages can be summarized in three crucial aspects: automated library identification; identification of unknown compounds, owing to EI extensive fragment information; inertness to coeluted matrix interferences owing to very unlikely ion–ion and ion–molecule interactions in the EI gas-phase environment. The direct-EI LC-MS interface is a simple and efficient solution able to produce high-quality, interpretable EI spectra from a wide range of low molecular weight molecules of different polarity. Because of the low operative flow rates, this interface relies on a nano-LC technology that helps in reducing the impact of the mobile phase on the gas-phase environment of EI. This review provides an extensive discussion on the role of EI in LC-MS interfacing, and presents in detail several performance aspects of the direct-EI LC-MS interface, especially in terms of response, mass-spectral quality, and matrix effects. In addition, several key applications are also reported.     

Selective gas-phase capture of explosives on metal beta-diketonate polymers

A variety of metal beta-diketonate polymers were assessed for gas-phase selective retention of nitro aromatic, nitrate ester, and peroxide explosives. The La(III) complex of p-di(4,4,5,5,6,6,6-heptafluoro-1,3-hexanedionyl)benzene [La(dihed)] showed 13-42 times the retention for the nitro aromatic compounds compared to a control column (identical column but lacking the 5% loading of the metal beta-diketonate polymer). Nitrate esters, the peroxide explosive triacetone triperoxide, and the taggant 1,4-dimethyl-1,4-dinitrobutane were too strongly retained to elute from the La(dihed) column; however, these compounds could be eluted from the less retentive Cu(dihed) or Zn(dihed) columns. A Kováts index of 2124 for 2,4,6-trinitrotoluene (TNT) on the La(dihed) column compared to 1662 on the control illustrates the excellent discrimination against nonpolar hydrocarbons, the principal matrix interference expected in air samples. A proof-of-principle experiment demonstrated analysis of an extrapolated 47 part-per-trillion (ppt) (v/v) of TNT in an air extract concentrate.     

Electron ionization of acetylene

Relative partial ionization cross sections and precursor specific relative partial ionization cross sections for fragment ions formed by electron ionization of C2H2 have been measured using time-of-flight mass spectrometry coupled with a 2D ion-ion coincidence technique. We report data for the formation of H+, H+2, C2+, C+/C2+ 2, CH+/C2H+2, CH+2, C+2, and C2H+ relative to the formation of C2H+2, as a function of ionizing electron energy from 30-200 eV. While excellent agreement is found between our data and one set of previously published absolute partial ionization cross sections, some discrepancies exist between the results presented here and two other recent determinations of these absolute partial ionization cross sections. We attribute these differences to the loss of some translationally energetic fragment ions in these earlier studies. Our relative precursor-specific partial ionization cross sections enable us, for the first time, to quantify the contribution to the yield of each fragment ion from single, double, and triple ionization. Analysis shows that at 50 eV double ionization contributes 2% to the total ion yield, increasing to over 10% at an ionizing energy of 100 eV. From our ion-ion coincidence data, we have derived branching ratios for charge separating dissociations of the acetylene dication. Comparison of our data to recent ab initio/RRKM calculations suggest that close to the double ionization potential C2H2+2 dissociates predominantly on the ground triplet potential energy surface (3Sigma*g) with a much smaller contribution from dissociation via the lowest singlet potential energy surface (1Delta g). Measurements of the kinetic energy released in the fragmentation reactions of C2H2+2 have been used to obtain precursor state energies for the formation of product ion pairs, and are shown to be in good agreement with available experimental data and with theory.     

Electron beam curing with glycerol methacrylate

Glycerol methacrylate and hydroxyethyl methacrylate in combination with glycerol dimethacrylate as crosslinker were applied with electron beam irradiation to consolidate the color painting of the terracotta army of the first Chinese Emperor Qin Shihuangdi. The described mixture allowed reducing the necessary irradiation dose for consolidation to 40 kGy. The formation of glossy spots could be suppressed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6660–6663, 2008