Quantitative analysis of polycyclic aromatic hydrocarbons using high-performance liquid chromatography-photodiode array-high-resolution mass spectrometric detection platform coupled to electrospray and atmospheric pressure photoionization sources

Polycyclic aromatic hydrocarbons (PAHs) are common pollutants present in atmospheric aerosols and other environmental mixtures. They are of particular air quality and human health concerns as many of them are carcinogenic toxins. They also affect absorption of solar radiation by aerosols, therefore contributing to the radiative forcing of climate. For environmental chemistry studies, it is advantageous to quantify PAH components using the same analytical technics that are commonly applied to characterize a broad range of polar analytes present in the same environmental mixtures. Liquid chromatography coupled with photodiode array and high-resolution mass spectrometric detection (LC-PDA-HRMS) is a method of choice for comprehensive characterization of chemical composition and quantification of light absorption properties of individual organic compounds present in the environmental samples. However, quantification of non-polar PAHs by this method is poorly established because of their imperfect ionization in electrospray ionization (ESI) technique. This tutorial article provides a comprehensive evaluation of the quantitative analysis of 16 priority pollutant PAHs in a standard reference material using the LC–MS platform coupled with the ESI source. Results are further corroborated by the quantitation experiments using an atmospheric pressure photoionization (APPI) method, which is more sensitive for the PAH detection. The basic concepts and step-by-step practical guidance for the PAHs quantitative characterization are offered based on the systematic experiments, which include (1) Evaluation effects of different acidification levels by formic acid on the (+)ESI-MS detection of PAHs. (2) Comparison of detection limits in ESI+ versus APPI+ experiments. (3) Investigation of the PAH fragmentation patterns in MS² experiments at different collision energies. (4) Calculation of wavelength dependent mass absorption coefficient (MAC_λ) of the standard mixture and its individual PAHs using LC-PDA data. (5) Assessment of the minimal injected mass required for accurate quantification of MAC_λ of the standard mixture and of a multi-component environmental sample.     

Selectivity trends in packed column supercritical fluid chromatography with C18 stationary phases

The retention behavior of polycyclic aromatic hydrocarbons (PAHs) in packed-column supercritical fluid chromatography (SFC) is studied for monomeric and polymeric C₁₈ columns. Molecular shape discrimination (shape selectivity) is assessed through the use of Standard Reference Materials (SRMs), adn changes in selectivity are studied as a function of temperature, pressure, and mobile phase composition. Examples of separations of complex PAH isomer mixtures are presented, and guidelines are provided for modification and optimization of shape selectivity in SFC.     

Determinations of Intermediate Neutral Species in Hydrocarbon Discharge Plasma

This work reports laser ionization combined with Time-Of-Flight (TOF) mass spectrometry investigation on intermediate species in the hydrocarbon plasma of atmospheric-pressure fast-flow pulsed dc-discharge. All neutral intermediate species including transient radicals from benzene/Ar discharge have been characterized by a molecular beam sampling combined with TOF mass spectrometry. This shows that with a hydrocarbon gas mixture of 0.3% C₆H₆ in Ar discharge the intermediate species consist of simple radicals (such as C₂, C₅H₅, C₇H₇) and polycyclic organic molecules (C₁₀H₈, C₁₃H₁₀, C₁₄H₁₀). Theoretical studies on total energies and ionization potentials of the intermediate species have been carried out using the hybrid density functional theory. Effect of the ionization potential on mass spectral intensity has been discussed. Based on the observed data, the possible major neutral reaction channels of the plasma chemistry have been discussed. The developed experimental method has implications in volatile organic compounds removing and impurities diagnosis in Tokamak edge-plasma.     

Gas-Phase Synthesis of Triphenylene (C18H12)

For the last decades, the hydrogen-abstraction−acetylene-addition (HACA) mechanism has been widely invoked to rationalize the high-temperature synthesis of PAHs as detected in carbonaceous meteorites (CM) and proposed to exist in the interstellar medium (ISM). By unravelling the chemistry of the 9-phenanthrenyl radical ([C₁₄H₉]^.) with vinylacetylene (C₄H₄), we present the first compelling evidence of a barrier-less pathway leading to a prototype tetracyclic PAH – triphenylene (C₁₈H₁₂) – via an unconventional hydrogen abstraction–vinylacetylene addition (HAVA) mechanism operational at temperatures as low as 10 K. The barrier-less, exoergic nature of the reaction reveals HAVA as a versatile reaction mechanism that may drive molecular mass growth processes to PAHs and even two-dimensional, graphene-type nanostructures in cold environments in deep space thus leading to a better understanding of the carbon chemistry in our universe through the untangling of elementary reactions on the most fundamental level.     

Analysis of high-molecular-mass polycyclic aromatic hydrocarbons in environmental samples using liquid chromatography-atmospheric pressure chemical ionization mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) with molecular masses higher than 300 u were analysed using LC-atmospheric pressure chemical ionization (APCI) MS in extracts of environmental samples from Hamilton, Canada including zebra mussels from Hamilton Harbour, air particulate and coal tar. The LC-APCI-MS profiles of three molecular mass classes of PAHs (326 u, 350 u and 374 u) were compared to identify potential sources of PAH contamination in Hamilton Harbour. The Hamilton air particulate profile was also compared with an urban air reference standard (NIST SRM 1649) from Washington, DC, USA. Profiles of all extracts were similar and suggested an environmental predominance of PAHs within the three isomeric molecular mass classes studied. However, PAHs of molecular mass 326 u and 350 u were detected in extracts of coal tar and zebra mussels from Hamilton Harbour but were not detected in Hamilton air. These results indicated that some high-molecular-mass PAHs may be characteristic of contamination by coal tar.     

“Sock-Ball” Chromatographic Separation of Some Polycyclic Aromatic Hydrocarbons with C60-Fullerene Stationary Phase

Polycyclic aromatic hydrocarbons (PAHs) of different molecular shapes were tested and compared with a prepared C₆₀-fullerene-phase, and with the commercial Amino-phase or RP-18-phase in the mobile phase of methanol/dichloromethane (90/10 — 70/30) or n-hexane/dichloromethane (80/20). The chromatographic separation results indicate that C₆₀-fullerene-phase achieves the special selectivities and performances for the separation of PAHs. Based on the retention mechanism of “π-π” complex interaction or “Sock-Ball” shaped combination, PAHs undergo more pronounced interaction with C₆₀ ligand. For example, decacyclene, a sock-shaped PAH, the structure of which was calculated by means of semi-empirical molecular orbital methods, possesses stronger retention to give a “Sock-Ball” chromatographic separation with C₆₀-fullerene-phase. However, PAHs with bend, planar, or co-planar structures eluted on C₆₀-fullerene-phase undergo adsorption chromatography, but possess weaker retentions. The retention power of “Sock-Ball” chromatography can successfully recognize the different molecular shapes of PAHs.     

Separation of polycyclic aromatic hydrocarbons with a C60 bonded silica phase in microcolumn liquid chromatography

A chemically bonded C₆₀ silica phase was synthesized as a stationary phase for liquid chromatography (LC) and its retention behavior evaluated for various polycyclic aromatic hydrocarbons (PAHs) using microcolumn LC. The results indicate that the C₆₀ bonded phase offers selectivity different from that of octadecylsilica (ODS) bonded phases in the separation of isomeric PAHs. With the C₆₀ phase, PAH molecules having a partial structure similar to that of the C₆₀ molecule, e.g. triphenylene and perylene, were retained longer than with ordinary ODS stationary phases. The results also show that good correlation exists between the retention data with this C₆₀ bonded phase and with C₆₀ itself as the stationary phase.     

Development of solid-phase microextraction to study dissolved organic matter—Polycyclic aromatic hydrocarbon interactions in aquatic environment

Solid-phase microextraction coupled with gas chromatography and mass spectrometry (SPME–GC–MS) was developed for the study of interactions between polycyclic aromatic hydrocarbons (PAHs) and dissolved organic matter (DOM). After the determination of the best conditions of extraction, the tool was applied to spiked water to calculate the dissolved organic carbon water distribution coefficient (K_DOC) in presence of different mixtures of PAHs and Aldrich humic acid. The use of deuterated naphthalene as internal standard for freely dissolved PAH quantification was shown to provide more accuracy than regular external calibration. For the first time, K_DOC values of 18 PAHs were calculated using data from SPME–GC–MS and fluorescence quenching; they were in agreement with the results of previous studies. Competition between PAHs, deuterated PAHs and DOM was demonstrated, pointing out the non-linearity of PAH–DOM interactions and the stronger interactions of light molecular weight PAHs (higher K_DOC values) in absence of high molecular weight PAHs.     

Analysis of dammar resin with MALDI‐FT‐ICR‐MS and APCI‐FT‐ICR‐MS

Comprehensive analysis of high‐resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT‐ICR‐MS) using matrix‐assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two‐component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI‐FT‐ICR‐MS analysis were dichloromethane‐acetone and dichloromethane‐ethanol. The obtained MALDI‐FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420–2200, and the obtained APCI‐FTMS mass spectrum contains three clusters of peaks in the m/z range of 380–910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C₁₅H₂₄ units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI‐FTMS and APCI‐FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI‐FTMS and APCI‐FTMS mass spectrum, besides the oxidized C₃₀, triterpenoids also peaks corresponding to C₂₉ and C₃₁ derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na⁺ adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydrogen Abstraction/Acetylene Addition Revealed

For almost half a century, polycyclic aromatic hydrocarbons (PAHs) have been proposed to play a key role in the astrochemical evolution of the interstellar medium (ISM) and in the chemistry of combustion systems. However, even the most fundamental reaction mechanism assumed to lead to the simplest PAH naphthalene—the hydrogen abstraction–acetylene addition (HACA) mechanism—has eluded experimental observation. Here, by probing the phenylacetylene (C₈H₆) intermediate together with naphthalene (C₁₀H₈) under combustion‐like conditions by photo‐ionization mass spectrometry, the very first direct experimental evidence for the validity of the HACA mechanism which so far had only been speculated theoretically is reported.     

GC/MS characterization of monosubstituted hydrazones of glyoxylic acid ethyl ester

Electron ionization mass spectra and gas chromatographic retention indices of a series of newly synthesized N-monosubstituted (alkyl, aryl, allyl) hydrazones of glyoxylic acid ethyl ester RNHN=CHCO₂C₂H₅ were considered. It was shown the hydrazones were partially converted into isomeric (ethoxycarbonyl)methyl diimides during their GC separation (mostly in the heated injector port of the gas chromatograph). The retention indices of these diimides are lower than those of initial hydrazones by 268 ± 26 i.u. The most remarkable feature of these isomers appeared to be the high identity of their mass spectra because of similar rearrangements in molecular ions.     

Fast liquid chromatography/tandem mass spectrometry (highly selective selected reaction monitoring) for the determination of toltrazuril and its metabolites in food

In this work a fast liquid chromatography (LC)–tandem mass spectrometry (MS/MS) method was developed for the analysis of toltrazuril, a coccidiostatic drug, and its metabolites in meat food products. The applicability of atmospheric pressure chemical ionization (APCI) and heated electrospray ionization in both positive and negative modes was studied. APCI in negative mode provided the best results and the base peak originated from the loss of CF₃ (toltrazuril and toltrazuril sulfone) and CHF₃• (toltrazuril sulfoxide) was used as the precursor ion in MS/MS. A fast LC separation on a C₁₈ Fused-Core™ column was used together with the APCI-MS/MS method developed using enhanced mass resolution mode (highly selective selected reaction monitoring, H-SRM) to improve the sensitivity and selectivity for the analysis of these compounds in food samples. A simple sample treatment based on an extraction with acetonitrile and a cleanup with a C₁₈ cartridge was used. The LC-MS/MS (H-SRM) method showed good precision (relative standard deviation lower than 10%), accuracy, and linearity and allowed the determination of these compounds in food samples down to the parts per billion level (limits of detection between 0.5 and 5 μg kg^-1).     

High resolution end group determination of low molecular weight polymers by matrix-assisted laser desorption ionization on an external ion source fourier transform ion cyclotron resonance mass spectrometer

Matrix-assisted laser desorption ionization was performed on an external ion source Fourier transform ion cyclotron resonance mass spectrometer equipped with a 7-T superconducting magnet to analyze end groups of synthetic polymers in the mass range from 500 to 5000 u. Native, perdeutero methylated, propylated, and acetylated polyethylene glycol and polyvinyl pyrrolidone with unknown end-group elemental composition were investigated in the mass range up to 5000 u by using a 2,5-dihydroxybenzoic acid matrix. A small electrospray setup was used for the deposition of the samples. Two methods to process data were evaluated for the determination of end groups from the measured masses of the component molecules in the molecular weight ranges: a regression method and an averaging method. The averaging method is demonstrated to allow end-group mass determinations with an accuracy within 3 mu for the molecular weight range from 500 to 1400 and within 20 mu for the molecular weight range from 3400 to 5000. This is sufficient to identify the elemental composition of end groups in unknown polymer samples.     

Column Switching Technique for Group-Type Separation of Different Pah Classes by use of C18-Modified Silica and Polystyrene Packings

Abstract

A column switching technique was developed to realize a group-type separation of PAHs and nitrogen containing PAHs (N-PAHs) applying a C₁₈-immobilized polystyrene packing as well as a C₁₈-modified silica stationary phase. On the first column the group-type separation and also the separation of the N-PAH fraction in single compounds was performed. After backflush and transfer to a second column, the separation of the PAH fraction could be achieved.     

Selectivity Factors for Several Pah Pairs on C18 Bonded Phase Columns

Abstract

The selectivity factors for four pairs of polycyclic aromatic hydrocarbons (PAHs) have been found to be very different on the HC-ODS column in comparison to most other C₁₈ bonded-phase columns. The selectivity factors for these PAH pairs varied slightly with different manufacturing lots of the HC-ODS material, the selectivity variations for each PAH pair being linearly correlated with those for the other pairs.     

Development of a targeted adductomic method for the determination of polycyclic aromatic hydrocarbon DNA adducts using online column‐switching liquid chromatography/tandem mass spectrometry

Human exposure to polycyclic aromatic hydrocarbons (PAHs) from sources such as industrial or urban air pollution, tobacco smoke and cooked food is not confined to a single compound, but instead to mixtures of different PAHs. The interaction of different PAHs may lead to additive, synergistic or antagonistic effects in terms of DNA adduct formation and carcinogenic activity resulting from changes in metabolic activation to reactive intermediates and DNA repair. The development of a targeted DNA adductomic approach using liquid chromatography/tandem mass spectrometry (LC/MS/MS) incorporating software‐based peak picking and integration for the assessment of exposure to mixtures of PAHs is described. For method development PAH‐modified DNA samples were obtained by reaction of the anti‐dihydrodiol epoxide metabolites of benzo[a]pyrene, benzo[b]fluoranthene, dibenzo[a,l]pyrene (DB[a,l]P) and dibenz[a,h]anthracene with calf thymus DNA in vitro and enzymatically hydrolysed to 2′‐deoxynucleosides. Positive LC/electrospray ionisation (ESI)‐MS/MS collision‐induced dissociation product ion spectra data showed that the majority of adducts displayed a common fragmentation for the neutral loss of 116 u (2′‐deoxyribose) resulting in a major product ion derived from the adducted base. The exception was the DB[a,l]P dihydrodiol epoxide adduct of 2′‐deoxyadenosine which resulted in major product ions derived from the PAH moiety being detected. Specific detection of mixtures of PAH‐adducted 2′‐deoxynucleosides was achieved using online column‐switching LC/MS/MS in conjunction with selected reaction monitoring (SRM) of the [M+H]⁺ to [M+H–116]⁺ transition plus product ions derived from the PAH moiety for improved sensitivity of detection and a comparison was made to detection by constant neutral loss scanning. In conclusion, different PAH DNA adducts were detected by employing SRM [M+H–116]⁺ transitions or constant neutral loss scanning. However, for improved sensitivity of detection optimised SRM transitions relating to the PAH moiety product ions are required for certain PAH DNA adducts for the development of targeted DNA adductomic methods. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of microprobe two-step laser desorption/laser ionization mass spectrometry and gas chromatography/ mass spectrometry studies of polycyclic aromatic hydrocarbons in ancient terrestrial rocks

Microprobe two-step laser desorption/laser ionization mass spectrometry (μL²MS) and gas chromatography/mass spectrometry (GC/MS) were used to analyze polycyclic aromatic hydrocarbons (PAHs) in ancient terrestrial rocks. μL²MS provides an in situ analysis of very small samples, records the PAHs with no isomer information, and gives quantitative data on the degree of alkylation of a given PAH series over the complete mass range. GC/MS provides isomer separation and quantitation of PAHs in bitumen but not kerogen, and is limited by sample size. Combination of these techniques allows analysis of very small samples by μL²MS with GC/MS confirmation of isomer distributions of the solvent extractable components (bitumen). It was found that the concentration of bitumen within the rock samples affects the PAH alkylation signal for μL²MS. At low bitumen concentrations μL²MS can produce pyrolysis products from kerogen that is present; however, as bitumen concentrations increase, the PAH distribution from bitumen dominates the signal.     

适用于汽油参比燃料TRF的多环芳香烃生成机理

构造了一个包括287种组分和1569个反应的汽油参比燃料TRF(toluene reference fuel)燃烧过程中多环芳香烃(PAHs)生成机理的详细化学反应动力学模型,引入四种PAH生长路径将多环芳香烃的生成机理发展到芘A4(C20H12)水平,并通过对PAH产率的分析,指出乙炔(C2H2)、丙炔(C3H3)、乙烯基乙炔(C4H4)以及含有奇数碳原子的环戊二烯自由基(C5H5)和茚基(C9H7)等物质对PAHs生成和生长起到重要作用.该机理可以较准确计算基础燃料(PRF)和TRF火焰的着火延迟期、燃烧火焰中小分子(PAH前驱体C2H2、C3H4等)和PAHs的物质浓度.通过与实验数据的比较表明,该机理在不同温度、压力、化学计量比下具有较好的性能.由此分析,该机理对碳烟前驱物PAHs的预测性能是可靠的.     

The Effect of Cluster Size on the Intra-Cluster Ionic Polymerization Process

Polyaromatic hydrocarbons (PAHs) are widespread in the interstellar medium (ISM). The abundance and relevance of PAHs call for a clear understanding of their formation mechanisms, which, to date, have not been completely deciphered. Of particular interest is the formation of benzene, the basic building block of PAHs. It has been shown that the ionization of neutral clusters can lead to an intra-cluster ionic polymerization process that results in molecular growth. Ab-initio molecular dynamics (AIMD) studies in clusters consisting of 3–6 units of acetylene modeling ionization events under ISM conditions have shown maximum aggregation of three acetylene molecules forming bonded C₆H₆⁺ species; the larger the number of acetylene molecules, the higher the production of C₆H₆⁺. These results lead to the question of whether clusters larger than those studied thus far promote aggregation beyond three acetylene units and whether larger clusters can result in higher C₆H₆⁺ production. In this study, we report results from AIMD simulations modeling the ionization of 10 and 20 acetylene clusters. The simulations show aggregation of up to four acetylene units producing bonded C₈H₈⁺. Interestingly, C₈H₈⁺ bicyclic species were identified, setting a precedent for their astrochemical identification. Comparable reactivity rates were shown with 10 and 20 acetylene clusters.     

Charge stripping mass spectra: A method for identifying isomeric [C5H8]+˙ and [C3H6]+˙ ions

Charge stripping (collisional ionization) mass spectra are reported for isomeric [C₅H₈]⁺˙ and [C₃H₆]⁺˙ ions. The results provide the first method for adequately quantitatively determining the structures and abundances of these species when they are generated as daughter ions. Thus, loss of H₂O from the molecular ions of cyclopentanol and pentanal is shown to produce mixtures of ionized penta-1,3- and -1,4-dienes. Pent-1-en-3-ol generates [penta-1,3-diene]⁺˙. [C₃H₆]⁺˙ ions from ionized butane, methylpropane and 2-methylpropan-1-ol are shown to have the [propene]⁺˙ structure, whereas [cyclopropane]⁺˙ is produced from ionized tetrahydrofuran, penta-1,3-diene and pent-1-yne.