Vapour–liquid equilibrium for the systems diethyl sulphide + 1-butene, +cis-2-butene, +2-methylpropane, +2-methylpropene, +n-butane, +trans-2-butene

Isothermal vapour–liquid equilibrium was measured for the systems of diethyl sulphide + 1-butene, +cis-2-butene, and +2-methylpropene at 312.6 K, diethyl sulphide + n-butane was measured at 317.6 K, diethyl sulphide + trans-2-butene at 317.5 K, and diethyl sulphide + 2-methylpropane at 308.0 K. The pressure–temperature–total composition data were converted into pressure–temperature–liquid–vapour composition data using the method of Barker. Error estimates are provided for each variable. The isothermal parameters for the Wilson, NRTL and UNIQUAC activity coefficient models were regressed. The measurements were compared with the predictions by COSMO segment activity coefficient (COSMO-SAC) and UNIFAC.     

First kinetic evidence for the CH/π and π/π solute-solvent interaction of C60 in the Diels-Alder reaction with cyclohexadiene

The first CH/π solute-solvent interaction of C(60) was evidenced by the kinetic solvent effects in the Diels-Alder reaction with 1,3-cyclohexadiene based on the evaluation of linear free energy relationship of log k(2) with empirical solvent polarity and basicity parameters, E(T)(30) and D(π), respectively.     

Capture and dissociation in the complex-forming CH + H2 → CH2 + H, CH + H2 reactions

The rate coefficients for the capture process CH + H(2)→ CH(3) and the reactions CH + H(2)→ CH(2) + H (abstraction), CH + H(2) (exchange) have been calculated in the 200-800 K temperature range, using the quasiclassical trajectory (QCT) method and the most recent global potential energy surface. The reactions, which are of interest in combustion and in astrochemistry, proceed via the formation of long-lived CH(3) collision complexes, and the three H atoms become equivalent. QCT rate coefficients for capture are in quite good agreement with experiments. However, an important zero point energy (ZPE) leakage problem occurs in the QCT calculations for the abstraction, exchange and inelastic exit channels. To account for this issue, a pragmatic but accurate approach has been applied, leading to a good agreement with experimental abstraction rate coefficients. Exchange rate coefficients have also been calculated using this approach. Finally, calculations employing QCT capture/phase space theory (PST) models have been carried out, leading to similar values for the abstraction rate coefficients as the QCT and previous quantum mechanical capture/PST methods. This suggests that QCT capture/PST models are a good alternative to the QCT method for this and similar systems.     

Thermodynamic quantities for the interaction of Cl− with Mg2+, Ca2+ and H+ in aqueous solution from 250 to 325°C

The aqueous reactions, Mg²⁺+Cl^–=MgCl⁺, Ca²⁺+Cl^–=CaCl⁺, and H⁺ +Cl^–=HCl(aq), were studied as a function of ionic strength at 250, 275, 300, and 325°C using a flow calorimetric technique. The logK, H, S and C_p values were determined from the fits of the calculated and experimental heast. The data were reduced assuming a known functionality of the activity coefficient. Hence, the logK, H, S and C_p values determined in this study are dependent on the activity coefficient model used. These thermodynamic values were compared with literature results. The logK values for the formation of MgCl⁺ agree reasonably well with those reported in the literature. The logK values for CaCl⁺ formation agree reasonably well with those reported in the literature at 300 and 325°C. At lower temperatures, the agreement is poorer. The logK values for the formation of HCl(aq) are generally lower than those reported in the literature. The logK, H, S and C_p values for all three ion association reactions are positive and increase with temperature over the temperature range studied. These values are the first determined calorimetrically for the formation of MgCl⁺ and CaCl⁺ in the temperature range 275–325°C.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

A CAS SCF CI study of the 1Σ+g and 3IIu states of the C2 molecule and the 4Σ−g and 2IIu states of the C+2 ion

Ab initio calculations of the X ¹Σ⁺_g and a ³II_u states of C₂ and the X⁴Σ⁻_g and a²II_u states of the C⁻₂ molecular ion are performed to determine the corresponding potential curves around the potential minima and at the dissociation limits. A large Gaussian basis set augmented by three d-type polarization functions on each carbon center is used to approximate the molecular orbits. The calculations are done at the complete-active-space SCF and multi-reference configuration interactions level. Spectroscopic constants and rotation—vibration energies are derived from the ab initio calculated potentials. Good agreement between theory and experiment is obtained for the X¹Σ⁺_g and a ³II_u states of C₂. In the earlier tentative assignment of the observed electronic transition around 2490 Å to the ²Σ⁻_g ← ²II_u system in C⁺₂, the lower state is confirmed by the present calculations to be C⁺ ₂ (²II_u).     

The influence of “communicating states” on the dissociation yield in theS 1 of benzene

Non-radiative communicating states rate calculations forS ₁ S ₀ transitions in benzene are presented. The contribution ofC ₆ H ₅+H predissociation to the non-radiative rates with varying excess energy is investigated. Local modes with Morse oscillators for CH-stretch vibrations are introduced. In the channel-three region one finds that much less than 1% of the initial excited energy is found to be of discrete continuum character.C ₆ H ₅+H vibrational predissociation does not conform to the strong increase of pure internal conversion for high excess energies. The steep decrease of the dissociation yield at still higher excess energies is found to be closely related to the energy acceptor behaviour of the (harmonic) out-of-plane modes.     

NO+ formation pathways in dissociation of N2O+ ions at the C2Σ+ state revealed from threshold photoelectron-photoion coincidence velocity imaging

Using the novel threshold photoelectron-photoion coincidence (TPEPICO) velocity imaging technique, the dissociative photoionization of N(2)O molecule via the C(2)Σ(+) ionic state has been investigated. Four fragment ions, NO(+), N(2)(+), O(+), and N(+), are observed, respectively, and the NO(+) and N(+) ions are always dominant in the whole excitation energy range of the C(2)Σ(+) ionic state. Subsequently, the TPEPICO three-dimensional time-sliced velocity images of NO(+) dissociated from the vibrational state-selected N(2)O(+)(C(2)Σ(+)) ions have been recorded. Thus the kinetic and internal energy distributions of the NO(+) fragments have been obtained directly as the bimodal distributions, suggesting that the NO(+) fragments are formed via both NO(+)(X(1)Σ(+)) + N((2)P) and NO(+)(X(1)Σ(+)) + N((2)D) dissociation channels. Almost the same vibrational population reversions are identified for both dissociation pathways. Interestingly, the obtained branching ratios of the two channels exhibit some dependence on the excited vibrational mode for N(2)O(+)(C(2)Σ(+)), in which the excited asymmetrical stretching potentially promotes dissociation possibility along the NO(+)(X(1)Σ(+)) + N((2)D) pathway. In addition, the measured anisotropic parameters of NO(+) are close to 0.5, indicating that the C(2)Σ(+) state of N(2)O(+) is fully predissociative, indeed, with a tendency of parallel dissociation, and therefore, the corresponding predissociation mechanisms for the N(2)O(+)(C(2)Σ(+)) ions are depicted.     

The pK 2 * for the dissociation of H2SO3 in NaCl solutions with added Ni2+, Co2+, Mn2+, and Cd2+ at 25°C

The pK ₂ ^* for the dissociation of sulfurous acid from I=0.5 to 6.0 molal at 25°C has been determined from emf measurements in NaCl solutions with added concentrations of NiCl₂, CoCl₂, McCl₂ and CdCl₂ (m=0.1). These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of M²⁺ with SO ₃ ^2? yielded $$\begin{gathered} \beta _{NiSO_3 }^{(0)} = - 5.5, \beta _{NiSO_3 }^{(1)} = 5.8, and \beta _{NiSO_3 }^{(2)} = - 138 \hfill \\ \beta _{CoSO_3 }^{(0)} = - 12.3, \beta _{CoSO_3 }^{(1)} = 31.6, and \beta _{CoSO_3 }^{(2)} = - 562 \hfill \\ \beta _{MnSO_3 }^{(0)} = - 8.9, \beta _{MnSO_3 }^{(1)} = 18.7, and \beta _{MnSO_3 }^{(2)} = - 353 \hfill \\ \beta _{CdSO_3 }^{(0)} = - 7.2, \beta _{CdSO_3 }^{(1)} = 13.8, and \beta _{CdSO_3 }^{(2)} = - 489 \hfill \\ \end{gathered} $$ The calculated values of pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.01 pK units. The ion pairing model yielded $$\begin{gathered} logK_{NiSO_3 } = 2.88 and log\gamma _{NiSO_3 } = 0.111 \hfill \\ logK_{CoSO_3 } = 3.08 and log\gamma _{CoSO_3 } = 0.051 \hfill \\ logK_{MnSO_3 } = 3.00 and log\gamma _{MnSO_3 } = 0.041 \hfill \\ logK_{CdSO_3 } = 3.29 and log\gamma _{CdSO_3 } = 0.171 \hfill \\ \end{gathered} $$ for the formation of the complex MSO₃. The stability constants for the formation of MSO₃ complexes were found to correlate with the literature values for the formation of MSO₄ complexes.     

LapRLSR for NIR spectral modeling and its application to online monitoring of the column separation of Salvianolate

A novel near infrared (NIR) modeling method—Laplacian regularized least squares regression (LapRLSR) was presented, which can take the advantage of many unlabeled spectra to promote the prediction performance of the model even if there are only few calibration samples. Using LapRLSR modeling, NIR spectral analysis was applied to the online monitoring of the concentration of salvia acid B in the column separation of Salvianolate. The results demonstrated that LapRLSR outperformed partial least squares (PLS) significantly, and NIR online analysis was applicable.     

Metathesis of 1-butene and 2-butene to propene over Re_2O_7 supported on macro-mesoporous γ-alumina prepared via a dual template method

Macro-mesoporous γ-alumina support(MMA) was prepared by a sol-gel route in aqueous medium using pseudo-boehmite as aluminum source and polystyrene microspheres and Pluronic P123 as hard and soft dual templates,respectively.MMA had a BET specific surface area of about 259 m2 g-1,total pore volume of about 1.61 cm3 g-1,macropore diameter of about 102 nm,and mesopore diameter of about 14 nm.Re2O7/MMA and conventional Re2O7/Al2O3 were prepared by a incipient-wetness impregnation method,and their catalytic performances in the metathesis of 1-butene and 2-butene were tested in a fixed-bed tubular reactor.The result showed that Re2O7/MMA possessed higher activity and far longer working life-span than conventional Re2O7/Al2O3.     

A New Approach to C60-Containing Polyphosphazenes by Polymerization of Phosphonitrile Chloride Trimer in the Presence of C60

A novel synthetic strategy was developed to prepare polyphosphazenes containing C60 moieties. Thus, the phosphonitrile chloride trimer underwent thermal ring-opening polymerization （ROP） in the presence of C60 molecules to yield the reactive macromolecular intermediate, C60-containing poly（dichlorophosphazene）. And then, the other groups could be linked to the phosphazene backbone by nucleophilic substitution reaction of the chlorine atoms in this intermediate to produce a series of C60-containing polyphosphazene. The polymer exhibits good solubility in common organic solvents and is thermally stable.     

Disruptive influence of the host cage C60 on the guest He–H+ bond and bonding in H3+

Although a helium atom prefers to stay at the centre of a fullerene (C₆₀) cage and a proton binds with one of the carbon atoms from inside, DFT(MN15)/cc-pVTZ and DLPNO-MP2/def2-TZVP calculations show that the helium atom and the proton in HeH⁺ prefer to stay away from the centre of the cage, weakening the He–H⁺ covalent bond considerably. Both the helium atom and the proton exhibit noncovalent interactions with the carbon atoms of two pentagons at the opposite ends of the fullerene cage. Our calculations also show that a linear arrangement of H₃⁺ (inside C₆₀), pointing towards the centres of two pentagons opposite to each other, with the proton breaking away from H_2, is energetically more favored over the equilateral triangle geometry of free H₃⁺.     

Search for evidence of nuclear involvement in the fatal explosion of a “cold fusion” experiment

Forensic analyses of debris from the fatal explosion of an electrochemical cold fusion cell at SRI International were conducted at LLNL at the request of Cal-OSHA. One investigation focused on the possibility of conventional nuclear reaction mechanisms contributing to the total energy inventory of the incident. Selected metal components of the electrolysis apparatus were subjected to nondestructive -ray spectrometry with high-sensitivity, low-background Ge detector systems. The anticipated analytes in these studies were radioactivation products potentially induced in the explosion residue by either fast or thermal neutrons. The results of this investigation were negative within the temporal constraints of the incident and the analytical sensitivities of the instrumentation.     

Gas-phase CαCβ double bond cleavage in the dissociation of protonated 2-benzylidenecyclopentanones: Dissociative proton transfer and intramolecular proton-transport catalysis

Among gas-phase dissociation reactions, double bond cleavage reaction appears to happen extremely rare, especially in the case of CC double bond. In the dissociation reaction of protonated 2-benzylidenecyclopentanones in tandem mass spectrometry, the formation of benzyl cations was observed, resulting from the cleavage of C^α=C^β double bonds, which is different from the general cleavage route seen in most α, β-unsaturated ketone cases. A combined experimental and theoretical investigation on intramolecular hydrogen transfers was carried out to illustrate the mechanisms. The external proton is initially localized on the carbonyl oxygen (the thermodynamically-preferred protonation site). Upon collisional activation, the mobile proton stepwise migrates to the C^α position to achieve the reduction and subsequent cleavage of the C^α=C^β double bond. The stepwise proton transfer is achieved via intramolecular proton-transport catalysis with the assistance of the phenyl ring. The ortho position of the phenyl accepts the proton from the carbonyl oxygen via a 1,6-H shift, and then donates it to the C^α stepwise. The conventional 1,3-H shift from the carbonyl oxygen to the C^α position can be excluded in this case due to its significant energy barrier. Further isotope-labeling experiments are applied to confirming the reaction mechanism. Last but not least, the scope-expansion experiments indicates that the aromatic and cycloalkanonyl moieties play a crucial roles in the cleavage reaction of C^α=C^β double bond.     

Application of Bader’s atoms in molecules theory to the description of coordination bonds in the complex compounds of Ca2+ and Mg2+ with methylidene rhodanine and its anion

In the framework of Bader??s atoms in molecules theory a complete analysis of the distribution function of electron density in molecules of complexes of Ca²⁺ and Mg²⁺ with methylidene rhodanine and its anion was carried out. The role of mutual polarization of the metal cation and the ligand in the formation of coordination bonds was demonstrated. The accumulation of electron density in the interatomic space of coordination bonds is assumed to be a consequence of the deformation of the ligand electron shell under the influence of the cation electric field. Based on the magnitude and sign of the Laplacian and the electron energy density at the critical points of coordination bonds the interactions were classified the in terms of the atoms in molecules theory. The energy of the coordination bonds was evaluated using the Espinoza??s formula. The stability of metal-containing rings was considered basing on the values of the bond ellipticity.     

Synthesis and application of C2-symmetrical bis-β-amino alcohols based on the octahydro-cyclopenta[b]pyrrole system in the catalytic enantioselective addition of diethylzinc to benzaldehyde

Asymmetric catalytic ethylation of benzaldehyde utilizing a series of new, tetradental bis-β-amino alcohols based on the octahydro-cyclopenta[b]pyrrole system—derived from an industrial waste material—is presented. Attention is focused on steric aspects of the catalyst(-precursor) structure. Furthermore, the catalytic efficiency of the ethylene-bridged, C₂-symmetrical bis-β-amino alcohols is compared to related ‘monomeric’ structures. Potent chiral ligands, which are highly effective even at concentrations of below 2 mol%, have been developed reaching excellent enantioselectivities up to 100% ee.