Analytical Assessment of Bioelements in Various Types of Black Teas from Different Geographical Origins in View of Chemometric Approach

A comprehensive approach to the mineral composition of black teas of different origins was studied using the Flame Atomic Absorption Spectrometry (FAAS) method, supported by chemometric tools including Principal Component Analysis PCA) and Classification and Regression Trees (CART). Significant differences between the teas from seven countries (Japan, Nepal, Kenya, Iran, Sri Lanka, India, and China) were shown. K was the main element determined in all teas, with an average concentration of 11,649 mg/kg, followed by Ca, Mg and Mn. In general, regarding all investigated black teas, the element content was ranked in the following order: K > Ca > Mg > Mn > Fe > Na > Zn > Cu. The applied chemometric methods allowed us to recognize black tea clusters based on their mineral composition and place of cultivation, and allowed us to find correlations between particular elements in black teas. The performed analyses revealed interesting correlations between the concentration of various elements in black teas: K was negatively correlated with Na, Fe, Mn and Cu; K was positively correlated with the content of Ca and Mg. Significant positive correlations between Mn and Fe and Mn and Zn in the studied black tea samples were also revealed. It was shown that mineral composition may be a significant factor regarding the origin of the black tea, not only considering the country, but also the region or province.     

Application of nondestructive X-ray fluorescence analysis to determine the element composition of medicinal plants

A nondestructive X-ray fluorescence technique has been developed to determine Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Ba, and Pb in plants. The line element intensities were measured by an S4 Pioneer X-ray sequence spectrometer (Bruker AXS, Germany). The inversely proportional relationship was obtained between the analyte line intensity and mass of the plant, pressed on boric acid backing, for elements with an atomic number 11 < Z < 20. It was found that reduction of plant mass from 6 to 1 g leads to an increase in element determination sensitivity. The detection limits for 1 g of pressed plant were evaluated as μg/g: 5–20 (Na, Mg, Al); 1–4 (Si, P, S, Cl, K, Ca, Ti, Ba, Pb); 0.4-0.8 (Cr, Mn, Fe, Ni, Br, Cu, Zn, Rb and Sr). This technique was applied to determine the element composition of violets of Violaceae family, which are used in medicine.     

Verfahren zur Spurenanalyse aus metallischen Proben

Zusammenfassung Ein neues lösungsspektrographisches Zerstäubungsverfahren wird beschrieben, bei dem die Lösung so zerstäubt wird, daß sie die Graphitelektroden nicht berührt. Mit diesem Verfahren könnten 10^–3 bis 10^–5 % Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V und Zr in Eisen und Stahl bestimmt werden.Zur Bestimmung von Verunreinigungen oder Einschlüssen in Stahl wird ein spektrographisches Verfahren mit Preßlingselektroden empfohlen, das nur 0,1–1 mg Rückstand benötigt. Oxide von Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn und Zr konnten bis herab zu etwa 10^–7 g erfaßt werden.

---

Methods for the determination of trace elements from metallic samples

The principles of a new spectrographical atomizing-method of solution are described. The solution has to be atomized into a gap without contacting the surface of the graphite electrodes. In this way the exact determination of 10^–3 to 10^–5 % of Al, B, Cr, Cu, Mg, Mn, Mo, Ni, Si, Sn, Ti, V and Zr in iron and steel is possible.The microanalytical determination of impurities or inclusions in steel has been achieved by a spectrographical method with briquette electrodes. The necessary amount of isolation residue is only 0.1–1 mg. The oxides of Al, B, Ca, Co, Cu, Cr, Fe, Mg, Mn, Mo, Nb, Ni, Pb, Si, Sn, Sr, Ti, V, Zn and Zr can be accurately determined by this procedure. The limit of determination is about 10^–7 g.

     

Daily dietary intake of trace elements of radiological and nutritional importance by the adult Indian population

The concentrations of eleven trace elements: Ca, Co, Cr, Cs, Fe, I,K, Se, Sr, Th and Zn were determined in total diet samples and also in individualfood materials which constitute the typical Indian diet. Instrumental neutronactivation analysis (INAA) and radiochemical neutron activation analysis (RNAA)were employed for the analysis. Whereas the elements Fe, Co, Cr, Se and Znare important from the view point of their role in nutrition, the elementsCs, K, Sr and Th are of importance in radiation protection, and Ca and I havedual importance: both in nutrition as well as in radiation protection. Basedon the analysis of twenty total diet samples, prepared as per the data onthe dietary intake pattern of four provinces of India and the data on intakepattern of an average adult Indian, the geometric mean (GM) intake of variouselements was estimated to be 0.33 g (0.2–0.67) for Ca, 16.5 µg(8.3–31.1) for Co, 52.3 µg (35.1–131) for Cr, 4.7 µg(2.79–11.8) for Cs, 94.6 µg (60.6–201) for I, 1.90 g (1.25–3.54)for K, 1.13 mg (0.78–2.97) for Sr, 0.76 µg (0.45–1.66) forTh, 15.9 mg (10.2–34.3) for Fe, 56.3 µg (27.6–105.3) forSe and 8.6 mg (5.1–16.7) for Zn. Some of the important individual foodmaterials, such as cereals, pulses, milk, vegetables etc., were also analysedfor these elements to observe the contributions of the individual food materialsto their daily dietary intake. The results of the analysis showed that inthe case of Cs, K, Sr, Th, Fe, Zn and Co, almost 50% of the daily dietaryintake of the above stated elements is contributed by cereals and pulses.In the case of Ca however, significant amount is contributed by milk and incase of I, iodised salt could make significant contribution. The data collectedso far, for Se and Cr, was not sufficient to draw any definite conclusion.     

Very Stable Two Mega Dalton High-Molecular-Mass Multiprotein Complex from Sea Cucumber Eupentacta fraudatrix

In contrast to many human organs, only the human liver can self-regenerate, to some degree. Some marine echinoderms are convenient objects for studying the processes of regenerations of organs and tissues. For example, sea cucumbers Eupentacta fraudatrix can completely restore within several weeks, the internal organs and the whole body after their division into two or three parts. Therefore, these cucumbers are a very convenient model for studying the general mechanisms of regeneration. However, there is no literature data yet on which biomolecules of these cucumbers can stimulate the regeneration of organs and the whole-body processes. Studying the mechanisms of restoration is very important for modern biology and medicine, since it can help researchers to understand which proteins, enzymes, hormones, or possible complexes can play an essential role in regeneration. This work is the first to analyze the possible content of very stable protein complexes in sea cucumbers Eupentacta fraudatrix. It has been shown that their organisms contain a very stable multiprotein complex of about 2000 kDa. This complex contains 15 proteins with molecular masses (MMs) >10 kDa and 21 small proteins and peptides with MMs 2.0–8.6 kDa. It is effectively destroyed only in the presence of 3.0 M MgCl₂ and, to a lesser extent, 3.0 M NaCl, while the best dissociation occurs in the presence of 8.0 M urea + 0.1 M EDTA. Our data indicate that forming a very stable proteins complex occurs due to the combination of bridges formed by metal ions, electrostatic contacts, and hydrogen bonds.     

The determination of some elements in rocks by instrumental photon activation analysis

This text describes the instrumental determination of some elements in silicate samples of ≃1 g by photon activation. The following elements can be determined: In acidic rocks: Mg, Ca, Ti, Mn, Sr, Zr and Nb, in ultramafic rocks: Mg, Cr, Ni, and Mn. The relative standard deviation is a few percent.     

Rapid multi-element analysis of groundwater by high-resolution inductively coupled plasma mass spectrometry

A rapid and sensitive method was developed to determine, with a single dilution, the concentration of 33 major and trace elements (Na, Mg, Si, K, Ca, Li, Al, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, In, Sn, Sb, Cs, Ba, Re, Hg, Pb, Bi, U) in groundwater. The method relies on high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS) and works across nine orders of magnitude of concentrations. For most elements, detection limits for this method are considerably lower than methods based on quadrupole ICP-MS. Precision was within or close to ±3% (1) for all elements analyzed, with the exception of Se (±10%) and Al (±6%). The usefulness of the method is demonstrated with a set of 629 groundwater samples collected from tube wells in Bangladesh (Northeast Araiharzar). The results show that a majority of tube well samples in this area exceed the WHO guideline for As of 10 g L^–1, and that those As-safe wells frequently do not meet the guideline for Mn of 500 µg L^–1 and U of 2 µg L^–1.     

Findings of national proficiency test exercise for the determination of trace elements in edible mushroom reference material

This paper presents the results of the proficiency test exercise conducted in Pakistan for the determination of trace elements in mushroom reference material. Thirteen laboratories from different organizations of the country submitted trace elemental data on Al, As, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hg, K, Li, Mg, Mn, Na, P, Pb, Rb Sc, Si, Sm, Sr, Th, Zn. Results for Al, As, Br, Ca, Cd, Cl, Co, Cr, Cs, Cu, Fe, K, Mg, Mn, Na, Rb Sc, and Zn, in the mushroom material were reported by two or more participating laboratories and could be subjected to statistical evaluation. The original data of these trace elements was subjected to a computer program “Histo Version 2.1” provided by IAEA. The four outlier tests, i.e., Dixon, Grubbs, skewness and kurtosis were applied to the data sets. Consensus (overall) mean values, absolute standard deviation, relative standard deviation, standard error, median and range of values for these elements have been reported at a significance level of 0.05.     

Seeds as Potential Sources of Phenolic Compounds and Minerals for the Indian Population

Seeds are major sources of nutrients and bioactive compounds for human beings. In this work, the chemical composition and physicochemical properties of 155 Indian seeds (belonging to 49 families) are reported. Moisture and ash were measured with reference protocols from AOAC; total polyphenols and flavonoids were measured with spectrophotometric methods after extraction with organic solvents, and mineral elements were determined by X-ray fluorescence spectrophotometry. Total phenolic compounds, flavonoids and mineral contents (Al, Ba, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, P, Rb, S, Sr, Ti, V and Zn) were found to vary in the ranges 182–5000, 110–4465 and 687–7904 mg/100 g (DW), respectively. Noticeably, polyphenol contents higher than 2750 mg/100 g were observed in 18 seeds. In addition, mineral contents >5000 mg/100 g were detected in the seeds from Cuminum cyminum, Foeniculum vulgare, Commiphora wightii, Parkia javanica, Putranjiva roxburghii, Santalum album and Strychnos potatorum. Botanical and taxonomical variations in the proximate characteristics of the examined seeds are also discussed.     

The analysis of archaeological glass by inductively coupled plasma optical emission spectroscopy

Summary An analytical procedure is described for the analysis of archaeological glass by inductively coupled plasma optical emission spectroscopy (ICP-OES). Glass samples were analysed in solution after fusion with lithium metaborate at 1100°C. The analyses were performed in the sequential multielemental mode of operation, with the determination of 15 elements in four analytical runs; only elements with not too large concentration difference were analysed in a single run. The following elements were accounted for: Si, Na, Ca, Al, Fe, Mg, Mn, Ti, Sr, Ba, Cr, Ni, Cu, Co, Pb.     

Studies on the use of XeF2 as digestion reagent

A digestion procedure was developed for the determination of selected elements (Al, Ba, Ca, Ce, Cd, Co, Cr, Cu, Fe, La, Mg, Ni, Sr, Pb, Zn) in sediments using XeF₂. The use of XeF₂ has some interesting features but this reagent should be handled only under dry gas which is a severe limitation of the methodology. In a first step the sediment sample (0.1 g) is dried (120 °C) and digested by XeF₂ (1.5 g) in the vapor phase (190 °C; 9 × 10⁶ Pa). Then the dry residue is dissolved in aqua regia and the solution digested at high pressure once again (aqua regia digestion). Subsequently the digested solution is diluted with sub-boiling distilled water and is ready for the analysis by ICP-MS. The sediment standard CRM 320 was analyzed to verify the procedure. A comparison of the results with those obtained by the normally used fluoric acid digestion showed that the recovery rates of each investigated element agreed within a confidence interval of 95%, except Cr. The recovery rate of Cr was lower for the XeF₂ digestion than for the fluoric acid digestion by more than 5%. Further studies were focussed on the possible digestion of SiC by XeF₂ as first step for the trace element determination. In the gaseous reaction products Si could be detected by ICP-MS which gives evidence to a decomposition of SiC. A digestion procedure for small Si samples (0.010 g) was developed. Detection limits (DL) determined for selected elements of analytical interest (Al, Ca, Cd, Cr, Co, Cu, Fe, Mg, Ni, Pb) were between 1 to 12 ng/g. For most of the elements this is an improvement in comparison to the HF vapor phase digestion. The verification of the method was carried out with GFAAS. Received: 17 February 1999 / Revised: 15 June 1999 / Accepted: 17 June 1999     

PIXE application for multi-element analysis of marine micro-algae and measurement of the concentration factor of zinc

Marine micro-algae (Nannochloropsis sp., Phaeodactylum sp., etc.) wereobtained from the Pacific Ocean off Iwate Prefecture, Japan, and culturedpurely in nutritive seawater, PES and artificial seawater, ASP7 as a culturesolution. The algae in 5 ml of the culture solution was collected on a polycarbonatefilm (pore size : 1.0 µm) by suction filtration. The algae on the filmwas subjected to PIXE analysis. A 2.9 MeV proton beam bombarded it at 50 nAfor 15 minutes. Induced X-ray was measured by Si(Li) detector. Concentrationsof Na, Mg, Al, Si, P, S, Cl, K, Ca, Cr, Mn, Fe, Cu, Zn and Sr were determinedsimultaneously. PIXE can used for multi-element analysis of a sample below1 mg, so the culture size for algae was 10–250 ml and every apparatuswas small and of low cost. Nannochloropsis sp. was given a different culturesolution (PES) including Zn²⁺ from 0.050 to 1.0 mg/l and incubatedat 22 °C, 2000 lux for 10 hours. Zn in Nannochloropsis sp. increased inproportion to the Zn²⁺ concentration in the culture solution. Theconcentration factor was given as 1600 500 (dry weight base). It was shownthat PIXE was a powerful tool for multi-element analysis of micro organismsand the measurement of bioaccumulation.     

Comparative PGAA and NAA results of geological samples and standards

Concentrations of major and trace elements in volcanic rock and soil samples, including geological standard reference materials, were determined by neutron activation analysis (NAA) and prompt gamma activation analysis (PGAA), both using the k ₀-standardization method. The paper highlights the different experimental procedures, such as sample preparation, data collection and spectrum evaluation. In geological samples, PGAA gives precise results for major elements (Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K and—as a unique method—for H), for some of the light trace elements as B and Cl, as well as for Sc, S, Cr, Co, Ni, Cd, Nd, Sm and Gd. NAA is sensitive for the rare earth elements, and for many major (Ti, Al, Fe, Mn, Mg, Ca, Na, K) and trace elements (e.g.: Sc, V, Cr, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Zr, As, Sb, Ce, Ba, Hf, Ta, W). For most major elements the results obtained by the two methods show good agreement. The comparison of the results obtained for trace elements is not always possible, since PGAA is less sensitive and concentrations are often below its detection limits. Nevertheless, the complementarity of NAA and PGAA allows nearly panoramic analysis of geological materials.     

Assessment of the essential element and heavy metal content of edible fish muscle

The aim of this work was to determine the concentrations of some essential and toxic elements in the muscle of ten species of commercial fish consumed in Portugal. We combined two different techniques for determination of the elements—energy-dispersive X-ray fluorescence (EDXRF) was used to quantify K, Ca, Fe, Zn, Se, Rb, and Sr and flame atomic-absorption spectrometry for analysis of Cr, Ni, Cu, Cd, Hg, and Pb. The latter technique was used because of its higher sensitivity, because these elements were not detected by EDXRF. The results obtained show a similar pattern for the trace elements. K and Ca are present at the highest concentrations in all the samples studied, from 0.6–1.3% and from 0.04–0.08%, respectively, followed by Zn, Fe, Sr, Se, and Rb. Sr is present at higher concentrations than Rb in all the species studied except meagre. Concentrations of the elements in octopus do not follow this pattern—Fe is present at a higher concentration than Zn. Low concentrations of Cr (0.66–1.5 g g^–1), Ni (0.11–0.24 g g^–1), Cd (0.01–0.08 g g^–1), Hg (0.49–2.74 g g^–1), and Pb (0.02–0.06 g g^–1) were observed in all the samples analysed. The concentration of Hg was highest in Helicolenus dactylopterus—5.4 g g^–1 in one sample.     

白族长寿地区硬果仁中19种元素的测定分析

用电感耦合等离子体发射光谱法（ICP－AES）,对云南省白族长寿区的葵花子仁、麻子仁和核桃仁中的Ca、Mg、P、S、Na、AI、B、Fe、Zn、Cu、Mo、Sr、Mn、Cr、Se、Ge、Cd、Pb、As等19种元素进行了测定分析。结果表明,3种硬果仁中含有丰富的人体必需的Ca、Mg、P、S、Na、Fe、Zn、Mn、Se、Cu、Cr、Sr、Mo等有益元素,且P、Mg、S、Ca、Na、Zn、Mn、Fe、Se的含量较高。这些生命元素在3种硬果仁中的含量存在差异。有害元素Cd、Pb均未检出,核桃仁中As含量较高。硬果仁中富含这些生命元素是该地区老人健康长寿的一个重要原因。     

Atomic absorption determination of traces of elements in ammonium perrhenate of high purity

Summary Methods for the determination of traces of As, Bi, Ca, Cd, Co, Cu, Cr, Fe, In, K, Mg, Mn, Mo, Na, Ni, Pb, Se, Si, Sb, Sn, Te, Tl, V and Zn in ammonium perrhenate of 99.99% –99.999% purity grade are proposed. Na, K, Ca, Mg and Si are determined directly in the aqueous sample solution, while the remaining elements, except Mo, are determined after preliminary extractive separation of their dithiocarbamate complexes at two different pH-values (8-9 and 5–6). Mo is separated from the matrix by extraction with -benzoinoxime. The analaysis is carried out by FAAS or ETAAS, depending on the concentration of the corresponding trace elements. The recovery factor is checked for impurity amounts of 1 g/ml and 0.2 g/ml, respectively.

---

AAS-Bestimmung von Elementspuren in hochreinem Ammoniumperrhenat

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Assessment of atmospheric deposition of metals in Ha Noi using the moss bio-monitoring technique and proton induced X-ray emission

Journal of Radioanalytical and Nuclear Chemistry - The concentration of 22 metal elements including Mg, Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Br, Rb, Sr, Zr, Ba and Pb in Barbula...     

Mg(OH)_2共沉淀和直接稀释联用ICP-MS法准确测定海水中的多种常量-微量元素

对海水中多种常量/微量元素分别用Mg(OH)_2共沉淀和直接稀释ICP-MS法进行方法比较研究,分别确定了这些元素适宜的准确分析方法,为海水中常量/微量元素的ICP-MS测定提供了实用的检测手段。结果表明,Mg(OH)_2共沉淀法能够实现对V,Cr,Mn,Co,Cd及稀土元素(La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)等19种微量元素的分离富集和准确测定;10倍直接稀释法能够同时准确测定海水中B,Sr,Li,Rb,I,V,Cr,As,Cd,U,Mo,Cu,Mn 13种微量元素,但不适合Zn,Ni,Co和Pb,以及稀土元素等在海水中浓度过低元素的测定;两种方法对适宜测定的元素均操作简便快速,具有较高的准确度和精密度。这两种方法联用,就可用约50 mL的海水实现大洋和近海海水中Co,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu(这15个元素采用Mg(OH)_2共沉淀法)及B,Sr,Li,Rb,I,V,Cr,As,Cd,U,Mo,Cu,Mn(这13个元素采用10倍直接稀释法)等28种元素的准确测定。     

Neutron activation analysis for the determination of contaminants in food contact materials

A neutron activation method has been developed for the analysis of high density polyethylene, low density polyethylene, polypropylene, polyethylene terephthalate and polystyrene. Samples weighing 2–5 g were irradiated in a thermal neutron flux of 10¹⁶ neutrons m^–2 s^–1 and measured with gamma ray spectrometry for 64 elements. With the method developed here over 50 elements can be detected at concentrations below 1 mg/kg. Correction factors were applied for neutron flux variation and counting geometry.The method was validated using reference material citrus leaves (NIST) for Na, Mg, Al, K, Ca, Mn, Cu, Sr and I, and a suite of in house standards doped with Al, Cr, Co, Mg, Zn and Sb confirmed repeatability of the method. The method was used to measure inorganic contaminants in the raw polymers and retail samples of plastic packaging used in contact with food.     

Determination of mineral constituents in duplicate portion diets of two university student groups by instrumental neutron activation

Concentrations of 15 elements were determined simultaneously in duplicateportion diets of two university student groups from So Paulo Universityconsisting of nine women (20–23 years) and ten men (20–24 years).Thediet samples were prepared by either freeze-drying or drying in a ventilatedoven. About 100–200 mg of diets were irradiated for 2 minutes and 8hours in the IEA-R1m research reactor and Br, Ca, Cl, Co, Cr, Cs, K, Fe, Mn,Mg, Mo, Na, Rb, Se, and Zn were determined by instrumental neutron activationanalysis (INAA). The average daily intakes found in the women and men groupswere: 2.1 and 4.3 mg of Br, 501 and 707 mg of Ca; 3.1 and 6.0 g of Cl; 12and 25 mg of Co; 15 and 36 µg of Cs; 53 and 63 µg of Cr; 5.1 and10.8 mg of Fe; 1.3 and 2.8 g of K; 134 and 306 mg of Mg; 1.3 and 4.1 mg ofMn; 134 and 302 mg of Mo, 2.0 and 4.1 g of Na; 2.4 and 4.6 mg of Rb; 29 and41 µg of Se; 6.2 and 10.6 mg of Zn, respectively. The daily intakesof Ca, Se and Zn in both groups and Fe in the women groups appeared to bebelow the U.S. RDA recommendations. For the elements Na and Cl the daily intakeswere higher than the recommended values by RDA.