Kinetics of the Hg(II)/Hg electrode reaction in DMSO solutions of chloride ions

The electrode reaction Hg(II)/Hg in complex chloride solutions with dimethyl sulfoxide as solvent has been investigated at the equilibrium potential by the faradaic impedance method and a cyclic current-step method. The ionic strength was 1 M with ammonium perchlorate as supporting electrolyte, and the temperature was 25°C. Double-layer data have been determined by electrocapillary measurements. From the results of the kinetic measurements at ligand numbers ≤1.1 or ≥2.3 it is concluded that the overall charge transfer proceeds step-wise. The solvated Hg²⁺ and Hg₂²⁺ as well as the complexes HgCl_j^2?j and the dinuclear Hg₂Cl³⁺ contribute to the exchange current density. The rate constant of the step HgCl_j^2?j/ Hg(I) is found to increase with the number of Cl^? coordinated. This increase can be correlated to a decrease in solvation and a lengthening of the Hg?Cl distance. For 1.1 << 2.3, impedance measurements indicate a rate-controlling adsorption step. It is suggested that the uncharged HgCl₂ then forms an adsorbed network on the mercury surface.     

Determination of terbutaline with ferrocene-gold colloid-1,4-benzenedimethanethiol layer-by-layer self-assembled gold electrode

Aminylferrocene is successfully immobilized on nanosized gold colloid particles associated with a 1,4-benzenedimethanethiol monolayer on a gold electrode surface and characterized by cyclic voltammograms and electrochemical impedance spectroscopy. In a pH 7.0 phosphate buffer solution, the formal potential (E ⁰’) of Fc is 0.432 V (SCE), and the apparent surface electron-transfer rate constant is 0.89 s⁻. The immobilized Fc gives an excellent electrocatalytic response to the terbutaline oxidation. The catalytic-current response of differential pulse voltammograms increases linearly with the terbutaline concentration from 1.75 × 10⁻⁷ to 5.62 × 10⁻⁴ mol/l. The detection limit is 2.30 × 10⁻⁸ mol/l. The determination of terbutaline in a tablet dosage is satisfactory. The method is simple, quick, and sensitive. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 8, pp. 969–974. The text was submitted by the authors in English.     

Electrochemistry of electropolymerized tetra (p-aminophenyl)porphyrin nickel film electrode and catalytic oxidation of acetaminophen

A polymer film of tetra(p-aminophenyl) porphyrin nickel was obtained at a glassy carbon electrode by a cyclic voltammetric method. Cyclic voltammograms of the film electrode exhibited two stable redox waves with anodic peak potential at 0.43V and cathodic peak potential at 0.30 V in 0.5M NaOH aqueous solution. The electrocatalytic characteristics of the film electrode were studied by cyclic voltammetry, a. c. impedance analysis and other methods. The oxidation peak current increased linearly with the addition of acetaminophen to the aqueous NaOH medium in the range 1 × 10^–6–2 × 10^–4 M acetaminophen. The performance of the electrode was verified by the determination of acetaminophen in a paracetamol preparation.     

Specific features of the behavior of an electrochemical system in the case of the Hopf instability for a spherical electrode

Model approximations are developed that allow establishing a quantitative relationship between the geometrical parameters of a spherical electrode, the faradaic impedance, and instabilities of the electrochemical system for an electrode reaction under potentiostatic conditions for the adsorption of species preceding their discharge. It is shown that the control parameter ω_H in the Hopf bifurcation point depends on the electrode size. The effect of the Nernst diffusion layer is observed at low frequencies in the range of negative faradaic impedance values.     

Redox capacitance of poly-3,4-ethylenedioxythiophene studied by cyclic voltammetry and faradaic impedance spectroscopy

The paper presents results of studying the electrochemical properties of poly-3,4-ethylenedioxythiophene films using the methods of cyclic voltammetry and faradaic impedance spectroscopy in acetonitrile and propylene carbonate solutions of different electrolytes: LiClO₄, Bu₄NBF₄, Bu₄NPF₆. The effect of the film synthesis conditions, the nature of anion and solvent, and the supporting electrolyte concentration on the film redox capacitance is discussed. Main attention is paid to the comparison of values characterizing the redox capacitance of a poly-3,4-ethylenedioxythiophene film C _lf (determined using the faradaic impedance method) and C _cv (determined using the cyclic voltammetry method) and the studies of their dependence on the varied experimental factors. The experimental C _lf vs. E curves are analyzed using the relationships of a model of a uniform film.     

Determination of electrochemical kinetic parameters from the measurement of faradaic impedance during the growth of the dropping mercury electrode

The electrochemical kinetic parameters of the V(II)/V(III) couple in HBr solutions of different concentrations were determined from the measurement of faradaic impedance as a function of time during the growth of the dropping mercury electrode. The same method of analysis was applied to the study of the effect of uncharged surfactants on the electrode reaction of Cd(II) in 1 M NaNO₃ solutions. The rate constant of the vanadium system decreased with increasing concentration of HBr; this change of the rate constant was discussed in terms of the Frumkin double-layer effect. The relationship between the rate constant of Cd(II) and coverage of the surfactants was not linear, and followed the equation based upon Parsons' model of the blocking effect. The conditional rate constant of Cd(II) in the absence of surfactants was determined to be 0.6–1.1 cm s^?1 from the dependence of the rate constant on the coverage.     

Ac polarography and faradaic impedance of strongly adsorbed electroactive species: Part IV. Experimental study of the faradaic impedance of the redox systems benzo(c)cinnoline-dihydrobenzo(c) cinnoline

The faradaic impedance of the surface redox system benzo(c)cinnoline-dihydrobenzo(c)-cinnoline is studied experimentally in aqueous medium between pH 5 and 13. The variations of the impedance components are in good accord with the theoretical predictions. A V-shaped curve is found for log k_s=f(pH) (k_s=rate constant of the surface electrochemical reaction). It is estimated that the determination of rate constant values up to 2×10⁴ s^?1 on a mercury electrode is possible by this method.     

Background subtraction for rapid scan voltammetry

Methods for the elimination of residual current in fast scan (> 300 V s⁻¹) voltammetry have been evaluated at microvoltammetric electrodes. Staircase voltammetry is found to give only a modest improvement in the ratio of the faradaic current to the residual current. Supeior results are obtained when the residual current, obtained in supporting electrolyte solution, is digitally subtracted from the voltammogram obtained in the presence of the electroactive species. The subtraction process is facilitated by conducting the whole experiment in a flow injection apparatus so that the electrode remains in solution while the two voltammograms are obtained. Undistorted voltammograms have been obtained for the reduction of anthracene (∼ 2 mM) at scan rates up to 10,000 V s⁻¹. At 300 V s⁻¹, virtually undistorted voltammograms are obtained for the reduction of Tl⁺ at low concentration (20 μM) in aqueous solution at a mercury microvoltammetric electrode. Analog offset of the residual current was used to improve the dynamic range. The limits of this technique are caused by the electronic noise in the ideal case where flat residual current curves are obtained.     

A.C. polarography and faradaic impedance of strongly adsorbed electroactive species: Part I. Theoretical and experimental study of a quasi-reversible reaction in the case of a Langmuir isotherm

The expression of the faradaic impedance is calculated in the case of a quasi-reversible system O+ne R under the following conditions: (a) both the oxidized and the reduced forms are strongly adsorbed; (b) the adsorption rate is large, and does not control the kinetics of the system; (c) the adsorption of both O and R obeys a Langmuir isotherm. The results show that the tangent of the phase angle is proportional to κ_s/ω (κ_s=rate constant of the electrochemical reaction). When ω→o, the phase angle tends towards 90°: the faradaic impedance becomes purely capacitive. The equation of the a.c. polarogram has been derived; whatever κ_s/ω, the peak height is proportional to the bulk concentration of the reactant, to τ^7/6 (τ=drop time), and to h^?1/2 (h=height of the mercury reservoir). When κ_s/ω→∞, the shape of the a.c. wave is identical to that of a “diffusion-controlled” a.c. wave. The experimental results obtained by a.c. polarography for the three systems azo-hydrazobenzene, benzo(c)cinnoline-dihydrobenzo(c)cinnoline and phenazine-dihydrophenazine are in excellent agreement with the theoretical predictions.     

Composition dependence of the Adam-Gibbs cooperative relaxation parameters in glycerol aqueous solutions

Cooperative relaxation of glycerol and its four aqueous solutions (60%, 70%, 80% and 90% by mass) has been investigated in terms of the nonlinear Adam-Gibbs (AG) enthalpy relaxation theory using differential scanning calorimetry (DSC). The AG parameters were obtained using curve-fitting method. The results indicated that the relaxation time of glycerol/water mixtures is water-sensitive. With the changing of water content, regular trend was found in both the equilibrium and the glassy state. The fitting results were used to estimate the microscopic parameters of the cooperative rearranging region (CRR), in particular the size of the CRR (z*) and the configurational state available to it (W*). The results showed that the W* recommended for polymers led to physically meaningless z* for glycerol and its aqueous solutions. Johari's method, which still based on the AG theory, yielded three to four molecules in the CRR. But the W* is anomalistically higher than those of polymers. With the changing of the water content, the size of CRR estimated using Donth formula seemed to be reasonable according to the analysis of the apparent activation energy (Δh*), the distribution parameter the of relaxation times (β). But it is difficult to reconcile the Adam-Gibbs’ z* with the results obtained using Donth's formula.     

Enhancement of the analytical properties and catalytic activity of a nickel hexacyanoferrate modified carbon ceramic electrode prepared by two-step sol-gel technique: application to amperometric detection of hydrazine and hydroxyl amine

The electroless sol-gel technique was used for the construction of nickel hexacyanoferrat (NiHCF) modified carbon composite electrodes (CCEs).This involves two steps: formation of a carbon ceramic electrode fabricated by nickel powder and then immersing the electrode into a sodium- hexacyanoferate solution for the immobilization of NiHCF films. The cyclic voltammety of the resulting modified CCEs prepared under optimum conditions, shows a well defined surface redox couple due to the [Ni^IIFe^III/II(CN)₆]^−2/−1 system. The effect of different alkali metal cations in supporting electrolyte on the behavior of the modified electrode were studied. The charge transfer coefficient (α) and charge transfer rate constant (k_s) for modified films were calculated. Hydrazine and hydroxylamine have been chosen as a model to elucidate the electocatalytic ability and analytical parameters of NiHCF modified CCE prepared by one and two-step sol-gel techniques and these compounds determined amperometically at the surface of modified electrodes. The latter shows a good electocatalytic activity towards the oxidation of hydrazine and hydroxylamine in the pH range 3-8 in comparison with CCEs modified by homogeneous mixture of graphite powder, Ni(NO₃)₂ and Na₂[Fe(CN)₆], (one-step sol-gel technique). Furthermore, the catalytic rate constant, linear dynamic range, limit of detection, and sensitivity for hydrazine and hydroxylamine detections were evaluated and compared with CCEs prepared with one-step sol-gel method. The modified CCEs containing NiHCF shows good repeatability, short response time, t 90%<3 s, long term stability (3 months) and excellent catalytic activity. Furthermore, the method of preparation is rapid and simple and the modified electrodes are renewed by simple mechanical polishing and immersing in [Na₃Fe(CN]₆] solution.     

Effect of the activation of a graphite-epoxy composite electrode and the buffer capacity of a solution on the reversibility of the hydroquinone electrode reaction

Peak potentials and the kinetics of hydroquinone oxidation at an electrode from a graphite-epoxy composite in activated and passivated states were studied in supporting electrolytes of different buffer capacities and pH varying from 0.1 to 8.8, using methods of direct-current and cyclic voltammetry. The electrode was activated before its polarization by mechanically cutting a 0.2–4-μm surface layer directly in a test solution. The electrode was passivated by storing in air for two or more days. The behavior of hydroquinone in its oxidation at the passivated and activated electrodes was compared using diagnostic criteria for the following functions: I _a?v ^1/2, logI _a?logv, I _a/v ^1/2?v ^1/2, and I _a/c, where v is the rate of the potential sweep and c is the volumetric concentration of hydroquinone. The potential difference of anodic and cathodic peaks in cyclic voltammograms indicated the reversibility of the electrode reaction in all supporting electrolytes.     

Integration of the rate constant and linearization of the kinetic equations in non-isothermal reaction kinetics

The theory of reaction rates gives approximations of the type A T^b e^?E/RT for rate constants. In thermal analysis the case where b = 0 is used in kinetic calculations. However, if b is regarded as a variable, treatment of the non-isothermal kinetic equations is not more complicated than in the special case of b = 0. In this paper Padé approximations, described in the literature of the special functions, and Legendre's continued fractions are proposed for evaluation of the A∫T^b e^?E/RT dT integrals. The Coats—Redfern types methods for the determination of the kinetic parameters are discussed analysing the errors of approximation involved in their deduction. On this basis a modified parameter estimation scheme is proposed.     

Synthesis of poly(3-methylthiophene) in the presence of 1-(2-Pyrrolyl)-2-(2-thienyl) ethylene by electropolymerization

In this study, the electropolymerization of 3-methylthiophene (3-MT) was preformed in the presence of a catalytic amount 1- (2-pyrrolyl)-2-(2-thienyl) ethylene (PTE) by cyclic voltammetry in acetonitrile as a solvent and lithium perchlorate as the electrolyte on a glassy carbon (GC) electrode. First, PTE was synthesized via the Wittig reaction. The addition of a catalytic amount of PTE during the electropolymerization of 3-MT changes the cyclic voltammograms such that the analysis of cyclic voltammograms of poly(3-MT) shows a considerable increase in the electroactivity and redoxability. Furthermore, the presence of PTE during the electropolymerization of 3-MT increases the polymerization rate. The CV measurement of the electron transfer ferro/ferricyanide redox system using different modified GC electrodes shows that the rate of charge transfer for poly(3-MT) in the presence of PTE is greater than that of poly(3-MT) alone. The conductivity of the obtained polymers was determined by electrochemical impedance spectroscopy (EIS) in 3.5% NaCl (w/v) solutions. With the application of Zview(II) software to the EIS, we estimate the parameters of the proposed equivalent circuit, based on a physical model for the electrochemical behavior of coatings on the GC electrode, to be 15739 ohm cm² for the charge transfer resistance (R_ct) for poly(3-MT) alone and 9700 ohm cm² for poly(3-MT) in the presence of PTE. Thus, the film of poly(3-MT) formed in the presence of PTE is more conductive.     

Voltammetry at microcylinder electrodes: Part I. Linear sweep voltammetry

An expression for reversible linear sweep voltammograms at stationary microcylinder electrodes is presented. From numerical calculations theoretical voltammograms are obtained for various values of the dimensionless parameter, p=(nFa²v/RTD)^{$\text{1}\text{2}$}, where a is the radius of the electrode, v the potential sweep rate and D the diffusion coefficient. The peak current and the peak potential are evaluated from the voltammograms as functions of p and are expressed by approximate equations with high precision. In order to examine the validity of the equations, an experimental study was made at platinum wire micro-electrodes (a=10?10) μm). The experimental voltammograms were in good agreement with the ones predicted theoretically for various values of the sweep rates and for several different radii of the electrodes.     

Dawson型磷钨杂多阴离子P2W18O626-的电化学性质和对O2还原的电催化作用

用循环伏安、交流伏安和交流阻抗法对Dawson型磷钨杂多阴离子P₂W₁₈O₆₂^6-的电化学性质进行了详细研究, 循环伏安结果显示, P₂W₁₈O₆₂^6-在pH 2.52的0.1 mol·L^-1 Na₂SO₄+NaHSO₄溶液中有两对可逆的单电子还原-氧化波和两对可逆的双电子还原-氧化波. 单电子波的峰电位和电流与溶液的pH无关, 双电子波的峰电位则随溶液pH的增加而负移, 峰电流降低, 表明双电子电极过程有H⁺参与, 其数目为2. 交流阻抗谱表明P₂W₁₈O₆₂^6-的电极过程完全受扩散控制, 实验测定其扩散系数(D_O)为2.5×10^-6 cm²·s^-1. 循环伏安结果表明P₂W₁₈O₆₂^6-的第III对波对O₂还原为H₂O₂具有显著的电催化作用, 催化效率约达300%. 将P₂W₁₈O₆₂^6-应用于PW₁₁O₃₉Fe(III)(H₂O)^4-构成的类电-芬顿过程, 使该过程对硝基苯的降解效率显著提高.     

A model for transitional plane Couette flow

A simplified model of plane Couette flow is derived by means of a cross-stream (y) Galerkin expansion in terms of trigonometric functions appropriate for idealized stress-free boundary conditions at the plates. A set of partial differential equations is obtained, governing the in-plane (x–z) space-dependence of a velocity field taken in the form: u=U₀(x,z,t)+[1+U₁(x,z,t)]sin(πy/2), v=V₁(x,z,t)cos(πy/2), w=W₀(x,z,t)+W₁(x,z,t)sin(πy/2). Beyond Lorenz-like Waleffe's modeling (Waleffe 1997), this Swift–Hohenberg type of approach is expected to give an access to the microscopic mechanism of spatiotemporal intermittency typical of the transition to turbulence in plane Couette flow (Pomeau 1986, Bergé et al. 1998).     

Determination of the population,depopulation and the anisotropic spin lattice relaxation rates in the photoexcited triplet state of phenazine. A light modulation-EPR study

The photoexcited triplet state of phenazine in toluene glasses at 35 K is investigated by light modulation-EPR spectroscopy. From the transient EPR spectra and the kinetics in the three canonical orientations (p = x, y, z) the rate parameters are determined. Thus, the depopulation rate constants k_p, the anisotropic spin lattice relaxation rate constants W_p, and the ratios between the population constants A_p are calculated: k_x = (2.2 ± 0.3) × 10² s^?1, k_y = (0.21 ± 0.04) × 10² s^?1, k_z = (0.06 ± 0.03) × 10² s^?1, W_x = (8.6 ± 0.9) × 10³ s^?1, W_y = (11.0 ± 1.0) × 10³ s^?1, W_z = (14.0 ± 1.4) × 10³ s^?1, and A_x: _Ay:A_z ≈ 1:0.04:0.02. It is concluded therefore that the in-plane spin state |τ_x > is the active one.     

Sensitive determination of iron(III) by gold electrode modified with 2-mercaptosuccinic acid self-assembled monolayer

Preparation and application of gold 2-mercaptosuccinic acid self-assembled monolayer (Au-MSA SAM) electrode for determination of iron(III) in the presence of iron(II) is described by cyclic voltammetry, electrochemical impedance spectroscopy, and Osteryoung square wave voltammetry. The square wave voltammograms showed a sharp peak around positive potentials +0.250 V that was used for construction of the calibration curve. Parameters influencing the method were optimized. A linear range calibration curve from 1.0 × 10⁻¹⁰ to 6.0 × 10⁻⁹ M iron(III) with a detection limit of 3.0 × 10⁻¹¹ M and relative standard deviation (R.S.D.) of 6.5% for n = 8 at 1.0 × 10⁻⁹ M iron(III) was observed in the best conditions. Possible interferences from the coexisting ions were also investigated. The results demonstrated that sensor could be used for determination of iron(III) in the presence of various ions. The validity of the method and applicability of the sensor were successfully tested by determining of iron(III) in natural waters (tap and mineral waters) and in a pharmaceutical sample (Venofer^® ampoule) without interference from sample matrix. The experimental data are presented and discussed from which the new sensor is characterized.     

Linear model for estimating the entropy of formation of aqueous anions

Recently, two of us published a series of articles in which the entropies of formation, TΔ_f S ^o, of different classes of aqueous species were estimated. A set of equations were presented wherein only simple parameters were derived from the ionic stoichiometry. In the current paper new equations of comparable precision are presented using a smaller set of simple parameters.