Single-Step Hydrolysis and Derivatization of Homocysteine Thiolactone Using Zone Fluidics: Simultaneous Analysis of Mixtures with Homocysteine Following Separation by Fluorosurfactant-Modified Gold Nanoparticles

Herein, we report a new automated flow method based on zone fluidics for the simultaneous determination of homocysteine and homocysteine thiolactone using fluorimetric detection (λ_ext = 370 nm/λ_em = 480 nm). Homocysteine thiolactone is hydrolyzed on-line in alkaline medium (1 mol L⁻¹ NaOH) to yield homocysteine, followed by reaction with o-phthalaldehyde in a single step. Derivatization is rapid without the need of elevated temperatures and stopped-flow steps, while specificity is achieved through a unique reaction mechanism in the absence of nucleophilic compounds. Mixtures of the analytes can be analyzed quantitatively after specific separation with fluorosurfactant-capped gold nanoparticles that are selectively aggregated by homocysteine, leaving the thiolactone analogue in solution. As low as 100 nmol L⁻¹ of the analyte(s) can be quantified in aqueous solutions, while concentrations > 2 μmol L⁻¹ can be analyzed in artificial and real urine matrix following 20-fold dilution. The percent recoveries ranged between 87 and 119%.     

Synthesis,Structure, and Photophysical Properties of Yellow-Green and Blue Photoluminescent Dinuclear and Octanuclear Copper(I) Iodide Complexes with a Disilanylene-Bridged Bispyridine Ligand

The synthesis, structural, and photophysical investigations of CuI complexes with a disilanylene-bridged bispyridine ligand 1 are herein presented. Dinuclear (2) and ladder-like (3) octanuclear copper(I) complexes were straightforwardly prepared by exactly controlling the ratio of CuI/ligand 1. Single-crystal X-ray analysis confirmed that dinuclear complex 2 had no apparent π…π stacking whereas octanuclear complex 3 had π…π stacking in the crystal packing. In the solid state, the complexes display yellow-green (λ_em = 519 nm, Φ = 0.60, τ = 11 µs, 2) and blue (λ_em = 478 nm, Φ = 0.04, τ = 2.6 µs, 3) phosphorescence, respectively. The density functional theory calculations validate the differences in their optical properties. The difference in the luminescence efficiency between 2 and 3 is attributed to the presence of π…π stacking and the different luminescence processes.     

Optimization of analytical conditions and validation of a fluorescence method for the determination of sulfadiazine in milk

This paper describes optimization and validation of a method for sulfadiazine determination in milk samples based on sulfadiazine derivatization with fluorescamine followed by excitation–emission (fluorescence) measurement. For both the optimization and the validation, a comparison between zero-order and first-order signals has been made, showing the advantages of using first-order signals. In the optimization the effects of the temperature of the derivatization reaction, the amount of fluorescamine and the derivatization time on the instrumental signal (maximum intensity or the net analyte signal) are studied by a factorial experimental design, with the optimal values of these factors which give the highest signal being 22 °C for the reaction temperature, 50 μl fluorescamine and 20 min of derivatization time. The validation of the method under the optimal experimental conditions shows that the analytical method is fit-for-purpose, with values of the capability of detection (CCβ) of 4.3 μg l⁻¹ at a sulfadiazine concentration of zero and with probabilities of a false positive and a false negative of 5%. Around the permitted limit (established for the sulfonamides at 100 μg l⁻¹), CCβ is 112 μg l⁻¹. The precision, as the intermediate reproducibility, was established as 1.2 and 3.3 μg l⁻¹ around 0 and 100 μg l⁻¹, respectively. In the application to milk samples spiked with sulfadiazine a mean recovery of around 90% was obtained with a standard deviation of about 8% (14 samples of different concentrations).     

Orthogonal binding and displacement of different guest types using a coordination cage host with cavity-based and surface-based binding sites

The octanuclear Co(ii) cubic coordination cage system H (or HW if it bears external water-solubilising substituents) has two types of binding site for guests. These are (i) the partially-enclosed central cavity where neutral hydrophobic organic species can bind, and (ii) the six ''portals'' in the centres of each of the faces of the cubic cage where anions bind via formation of a network of CH⋯X hydrogen bonds between the anion and CH units on the positively-charged cage surface, as demonstrated by a set of crystal structures. The near-orthogonality of these guest binding modes provides the basis for an unusual dual-probe fluorescence displacement assay in which either a cavity-bound fluorophore (4-methyl-7-amino-coumarin, MAC; λ_em = 440 nm), or a surface-bound anionic fluorophore (fluorescein, FLU; λ_em = 515 nm), is displaced and has its emission ‘switched on’ according to whether the analyte under investigation is cavity-binding, surface binding, or a combination of both. A completely orthogonal system is demonstrated based using a Hw/MAC/FLU combination: addition of the anionic analyte ascorbate displaced solely FLU from the cage surface, increasing the 515 nm (green) emission component, whereas addition of a neutral hydrophobic guest such as cyclooctanone displaced solely MAC from the cage central cavity, increasing the 440 nm (blue) emission component. Addition of chloride results in some release of both components, and an intermediate colour change, as chloride is a rare example of a guest that shows both surface-binding and cavity-binding behaviour. Thus we have a colourimetric response based on differing contributions from blue and green emission components in which the specific colour change signals the binding mode of the analyte. Addition of a fixed red emission component from the complex [Ru(bipy)₃]²⁺ (Ru) provides a baseline colour shift of the overall colour of the luminescence closer to neutral, meaning that different types of guest binding result in different colour changes which are easily distinguishable by eye.

Orthogonal binding of neutral or anionic fluorophores to the cavity or surface, respectively, of a coordination cage host allows a dual-probe displacement assay which gives a different fluorescence colorimetric response according to where analyte species bind.     

Pyrene-Based Fluorescent Porous Organic Polymers for Recognition and Detection of Pesticides

Eating vegetables with pesticide residues over a long period of time causes serious adverse effects on the human body, such as acute poisoning, chronic poisoning, and endocrine system interference. To achieve the goal of a healthy society, it is an urgent issue to find a simple and effective method to detect organic pesticides. In this work, two fluorescent porous organic polymers, LNU-45 and LNU-47 (abbreviation for Liaoning University), were prepared using π-conjugated dibromopyrene monomer and boronic acid compounds as building units through a Suzuki coupling reaction. Due to the large π-electron delocalization effect, the resulting polymers revealed enhanced fluorescence performance. Significantly, in sharp contrast with the planar π-conjugated polymer framework (LNU-47), the distorted conjugated structure (LNU-45) shows a higher specific surface area and provides a broad interface for analyte interaction, which is helpful to achieve rapid response and detection sensitivity. LNU-45 exhibits strong fluorescence emission at 469 nm after excitation at 365 nm in THF solution, providing strong evidence for its suitability as a luminescent chemosensor for organic pesticides. The fluorescence quenching coefficients of LNU-45 for trifluralin and dicloran were 5710 and 12,000 (LNU-47 sample by ca. 1.98 and 3.38 times), respectively. Therefore, LNU-45 serves as an effective “real-time” sensor for the detection of trifluralin and dicloran with high sensitivity and selectivity.     

Fluorimetric Analysis of Five Amino Acids in Chocolate: Development and Validation

Amino acids present ergogenic action, helping to increase, protect, and restore the muscular system of young athletes. Moreover, the encapsulation of five relevant amino acids in chocolate pellet form will appeal to them, facilitating their daily consumption. A reliable HPLC fluorimetric method was developed to detect and quantitatively determine L-Leucine, L-Isoleucine, L-Histidine, L-Valine, and β-Alanine in chocolate using aniline as an internal standard. Experimental design methodology was used to investigate and optimize the clean-up procedure of the samples. Therefore, three extraction techniques (solid-phase extraction (by two different SPE cartridges) and liquid–solid extraction (LSE)) were compared and evaluated. The LOQ values in chocolate varied from 24 to 118 ng/g (recovery 89.7–95.6%, %RSD < 2.5). Amino acids were pre-column derivatized with o-phthalaldehyde (OPA), while derivatization parameters were thoroughly investigated by experimental design methodology. The analysis was performed by HPLC-fluorescence (emission: λ = 455 nm, excitation: λ = 340 nm) method using a C₁₈ column and a mixture of phosphate buffer (pH = 2.8; 20 mM)-methanol as a mobile phase in gradient elution. The method was validated (r² > 0.999, %RSD < 2, LOD: 10 ng mL⁻¹ for histidine and leucine, 2 ng mL⁻¹ for alanine and valine, and 4 ng mL⁻¹ for Isoleucine) according to the International Conference on Harmonization guidelines.     

Coupling of sequential injection analysis and capillary electrophoresis - Laser-induced fluorescence via a valve interface for on-line derivatization and analysis of amino acids and peptides

The on-line coupling of sequential injection analysis (SIA) and capillary electrophoresis (CE) via an in-line injection valve is presented. The SIA system is used for automated derivatization of amino acids and peptides. Dichlorotriazinylaminofluorescein serves as the derivatization agent, thus enabling sensitive laser-induced fluorescence detection of the derivatized analytes. The SIA procedure includes the following steps: (a) introduction of reagent and sample zones in a holding coil, (b) sample and reagent mixing in a reaction coil, (c) stop-flow step for increase of the reaction time, and (d) delivery of derivatized sample into the loop of the micro-valve interface. A small portion of the analyte zone is introduced electrokinetically in the separation capillary via the valve interface and CE analysis is performed. Factors affecting the CE separation, such as pH, the borate and sodium dodecyl sulphate concentration of the background electrolyte have been optimized. The derivatization conditions have been studied to obtain a high reaction yield in a relative short time. The transfer of a part of the reaction plug into the loop of the valve interface has been optimized. Using des-Tyr(1)-[Met]-enkephalinamide as test compound, it is demonstrated that after automated derivatization, on-line electrophoretic analysis could be achieved. Glycine has been selected as the internal standard in order to correct for variations in reaction time and filling of the injection loop. For the enkephalin, good reproducibility (RSD<4.5% calculated by the ratio of the peak areas) and linearity (0.5-5 microg mL(-1), R(2)>or=0.994) are obtained with a detection limit of 30 ng mL(-1) (S/N=3).     

Solid-State Structures and Photoluminescence of Lamellar Architectures of Cu(I) and Ag(I) Paddlewheel Clusters with Hydrogen-Bonded Polar Guests

Two hexanuclear paddlewheel-like clusters appending six carboxylic-acid pendants have been isolated with the inclusion of polar solvent guests: [Cu₆(Hmna)₆]·7DMF (1·7DMF) and [Ag₆(Hmna)₆]·8DMSO (2·8DMSO), where H₂mna = 2-mercaptonicotininc acid, DMF = N,N’-dimethylformamide, and DMSO = dimethyl sulfoxide. The solvated clusters, together with their fully desolvated forms 1 and 2, have been characterized by FTIR, UV–Vis diffuse reflectance spectroscopy, TG-DTA analysis, and DFT calculations. Crystal structures of two solvated clusters 1·7DMF and 2·8DMSO have been unambiguously determined by single-crystal X-ray diffraction analysis. Six carboxylic groups appended on the clusters trap solvent guests, DMF or DMSO, through H-bonds. As a result, alternately stacked lamellar architectures comprising of a paddlewheel cluster layer and H-bonded solvent layer are formed. Upon UV illumination (λ_ex = 365 nm), the solvated hexasilver(I) cluster 2·8DMSO gives intense greenish-yellow photoluminescence in the solid state (λ_PL = 545 nm, Φ_PL = 0.17 at 298 K), whereas the solvated hexacopper(I) cluster 1·7DMF displays PL in the near-IR region (λ_PL = 765 nm, Φ_PL = 0.38 at 298 K). Upon complete desolvation, a substantial bleach in the PL intensity (Φ_PL < 0.01) is observed. The desorption–sorption response was studied by the solid-state PL spectroscopy. Non-covalent interactions in the crystal including intermolecular H-bonds, CH⋯π interactions, and π⋯π stack were found to play decisive roles in the creation of the lamellar architectures, small-molecule trap-and-release behavior, and guest-induced luminescence enhancement.     

Photophysical Study and Biological Applications of Synthetic Chalcone-Based Fluorescent Dyes

A chalcone series (3a–f) with electron push–pull effect was synthesized via a one-pot Claisen–Schmidt reaction with a simple purification step. The compounds exhibited strong emission, peaking around 512–567 nm with mega-stokes shift (∆λ = 93–139 nm) in polar solvents (DMSO, MeOH, and PBS) and showed good photo-stability. Therefore, 3a–f were applied in cellular imaging. After 3 h of incubation, green fluorescence was clearly brighter in cancer cells (HepG2) compared to normal cells (HEK-293), suggesting preferential accumulation in cancer cells. Moreover, all compounds exhibited higher cytotoxicity within 24 h toward cancer cells (IC₅₀ values ranging from 45 to 100 μM) than normal cells (IC₅₀ value >100 μM). Furthermore, the antimicrobial properties of chalcones 3a–f were investigated. Interestingly, 3a–f exhibited antibacterial activities against Escherichia coli and Staphylococcus aureus, with minimum bactericidal concentrations (MBC) of 0.10–0.60 mg/mL (375–1000 µM), suggesting their potential antibacterial activity against both Gram-negative and Gram-positive bacteria. Thus, this series of chalcone-derived fluorescent dyes with facile synthesis shows great potential for the development of antibiotics and cancer cell staining agents.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

The Synthesis of a Bis(thiosemicarbazone) Macrocyclic Ligand and the Mn(II), Co(II), Zn(II) and 68Ga(III) Complexes

A 1,4,7,10-tetraazacyclododecane (cyclen) variant bearing two thiosemicarbazone pendant groups has been prepared. The ligand forms complexes with Mn²⁺, Co²⁺ and Zn²⁺. X-ray crystallography of the Mn²⁺, Co²⁺ and Zn²⁺ complexes showed that the ligand provides a six-coordinate environment for the metal ions. The Mn²⁺ and Zn²⁺ complexes exist in the solid state as racemic mixtures of the Δ(δ,δ,δ,δ)/Λ(λ,λ,λ,λ) and Δ(λ,λ,λ,λ)/Λ(δ,δ,δ,δ) diastereomers, and the Co²⁺ complex exists as the Δ(δ,δ,δ,δ)/Λ(λ,λ,λ,λ) and Δ(λ,λ,λ,δ)/Λ(δ,δ,δ,λ) diastereomers. Density functional theory calculations indicated that the relative energies of the diastereomers are within 10 kJ mol⁻¹. Magnetic susceptibility of the complexes indicated that both the Mn²⁺ and Co²⁺ ions are high spin. The ligand was radiolabelled with gallium-68, in the interest of developing new positron emission tomography imaging agents, which produced a single species in high radiochemical purity (>95%) at 90 °C for 10 min.     

Molecularly Imprinted Silica-Coated CdTe Quantum Dots for Fluorometric Determination of Trace Chloramphenicol

A dual recognition system with a fluorescence quenching of quantum dots (QDs) and specific recognition of molecularly imprinted polymer (MIP) for the detection of chloramphenicol (CAP) was constructed. MIP@SiO₂@QDs was prepared by reverse microemulsion method with 3-aminopropyltriethoxysilane (APTS), tetraethyl orthosilicate (TEOS) and QDs being used as the functional monomer, cross-linker and signal sources, respectively. MIP can specifically recognize CAP, and the fluorescence of QDs can be quenched by CAP due to the photo-induced electron transfer reaction between CAP and QDs. Thus, a method for the trace detection of CAP based on MIP@SiO₂@QDs fluorescence quenching was established. The fluorescence quenching efficiency of MIP@SiO₂@QDs displayed a desirable linear response to the concentration of CAP in the range of 1.00~4.00 × 10² μmol × L⁻¹, and the limit of detection was 0.35 μmol × L⁻¹ (3σ, n = 9). Importantly, MIP@SiO₂@QDs presented good detection selectivity owing to specific recognition for CAP, and was successfully applied to quantify CAP in lake water with the recovery ranging 102.0~104.0%, suggesting this method has the promising potential for the on-site detection of CAP in environmental waters.     

Determination of Pregabalin in Human Plasma Using LC-MS-MS

A bioanalytical method has been developed and validated for determination of pregabalin in human plasma. The analytical method consists in the precipitation of plasma sample with trichloro acetic acid (20% v/v solution in water), followed by the determination of pregabalin by an LC-MS-MS method using gabapentin as internal standard. Separation was achieved on a Gemini C₁₈ 50 mm × 2.0 mm (3 μm) column with an isocratic mobile phase consisting of methanol–water (98:2, v/v) with 0.5% v/v formic acid. Protonated ions formed by a turbo ionspray in positive mode were used to detect analyte and internal standard. The MS-MS detection was by monitoring the fragmentation of 160.2→55.1 (m/z) for pregabalin and 172.2→67.1 (m/z) for gabapentin on a triple quadrupole mass spectrometer. The assay was calibrated over the range 0.1–15.0 μg mL⁻¹ with correlation coefficient of 0.9998. Validation data showed intra-batch (n = 6) CV% ≤ 6.89 and RE (%) between −4.17 and +3.08 and inter-batch (n = 18) CV% < 9.09 and RE (%) between −3.0 and +10.00. Mean extraction recovery were 80.45–89.12% for three QC samples and 87.56% for IS. Plasma samples were stable for three freeze–thaw cycles, or 24 h ambient storage, or 1 and 3 months storage at −20 °C. Processed sample (ready for injection) were stable up to 72 h at autosampler (4 °C). This method has been used for analyzing plasma samples from a bioequivalence study with 18 volunteers.     

Cooperation of σ–π and σ*–π* Conjugation in the UV/Vis and Fluorescence Spectra of 9,10-Disilylanthracene

In 1996, we reported that silyl groups of 9,10-disilylanthracenes significantly affect the UV/Vis and fluorescence spectra. Although the results indicate that the silyl groups have strong electronic effects on anthracene, the details of the mechanisms responsible for this have not yet been clarified. This article describes the analysis of the UV/Vis and fluorescence spectra of 9,10-bis(diisopropylsilyl)anthracene by theoretical calculations. This study reveals that π conjugation of anthracene is extended by cooperation of σ–π and σ*–π* conjugation between the silyl groups and anthracene. This effect increases the transition moment of the π–π* transition of anthracene. As a result, the molecular extinction coefficient of the ¹L_a band and the fluorescence quantum yield are increased.     

On–off switch of charge-separated states of pyridine-vinylene-linked porphyrin–C60 conjugates detected by EPR

The design, synthesis, and electronic properties of a new series of D–π–A conjugates consisting of free base (H₂P) and zinc porphyrins (ZnP) as electron donors and a fullerene (C₆₀) as electron acceptor, in which the two electroactive entities are covalently linked through pyridine-vinylene spacers of different lengths, are described. Electronic interactions in the ground state were characterized by electrochemical and absorption measurements, which were further supported with theoretical calculations. Most importantly, charge-transfer bands were observed in the absorption spectra, indicating a strong push–pull behavior. In the excited states, electronic interactions were detected by selective photoexcitation under steady-state conditions, by time-resolved fluorescence investigations, and by pump probe experiments on the femto-, pico-, and nanosecond time scales. Porphyrin fluorescence is quenched for the different D–π–A conjugates, from which we conclude that the deactivation mechanisms of the excited singlet states are based on photoinduced energy- and/or electron transfer processes between H₂P/ZnP and C₆₀, mediated through the molecular spacers. The fluorescence intensity decreases and the fluorescence lifetimes shorten as the spacer length decreases and as the spacer substitution changes. With the help of transient absorption spectroscopy, the formation of charge-separated states involving oxidized H₂P/ZnP and reduced C₆₀ was confirmed. Lifetimes of the corresponding charge-separated states, which ranged from ∼400 picoseconds to 165 nanoseconds, depend on the spacer length, the spacer substitution, and the solvent polarity. Interestingly, D–π–A conjugates containing the longest linkers did not necessarily exhibit the longest charge-separated state lifetimes. The distances between the electron donors and the acceptors were calculated by molecular modelling. The longest charge-separated state lifetime corresponded to the D–π–A conjugate with the longest electron donor–acceptor distance. Likewise, EPR measurements in frozen media revealed charge separated states in all the D–π–A conjugates investigated. A sharp peak with g values ∼2.000 was assigned to reduced C₆₀, while a broader, less intense signal (g ∼ 2.003) was assigned to oxidized H₂P/ZnP. On–off switching of the formation and decay of the charge-separated states was detected by EPR at 77 K by repeatedly turning the irradiation source on and off.     

Stepwise optimization approach for improving LC‐MS/MS analysis of zwitterionic antiepileptic drugs with implementation of experimental design

In this article, a step‐by‐step optimization procedure for improving analyte response with implementation of experimental design is described. Zwitterionic antiepileptics, namely vigabatrin, pregabalin and gabapentin, were chosen as model compounds to undergo chloroformate‐mediated derivatization followed by liquid chromatography coupled with tandem mass spectrometry (LC‐MS/MS) analysis. Application of a planned stepwise optimization procedure allowed responses of analytes, expressed as areas and signal‐to‐noise ratios, to be improved, enabling achievement of lower limit of detection values. Results from the current study demonstrate that optimization of parameters such as scan time, geometry of ion source, sheath and auxiliary gas pressure, capillary temperature, collision pressure and mobile phase composition can have a positive impact on sensitivity of LC‐MS/MS methods. Optimization of LC and MS parameters led to a total increment of 53.9%, 83.3% and 95.7% in areas of derivatized vigabatrin, pregabalin and gabapentin, respectively, while for signal‐to‐noise values, an improvement of 140.0%, 93.6% and 124.0% was achieved, compared to autotune settings. After defining the final optimal conditions, a time‐segmented method was validated for the determination of mentioned drugs in plasma. The method proved to be accurate and precise with excellent linearity for the tested concentration range (40.0 ng ml^?1–10.0 × 10³ ng ml^?1). Copyright © 2013 John Wiley & Sons, Ltd.     

Potent strategy towards strongly emissive nitroaromatics through a weakly electron-deficient core

Nitroaromatics seldom fluoresce. The importance of electron-deficient (n-type) conjugates, however, has inspired a number of strategies for suppressing the emission-quenching effects of the strongly electron-withdrawing nitro group. Here, we demonstrate how such strategies yield fluorescent nitroaryl derivatives of dipyrrolonaphthyridinedione (DPND). Nitro groups near the DPND core quench its fluorescence. Conversely, nitro groups placed farther from the core allow some of the highest fluorescence quantum yields ever recorded for nitroaromatics. This strategy of preventing the known processes that compete with photoemission, however, leads to the emergence of unprecedented alternative mechanisms for fluorescence quenching, involving transitions to dark nπ* singlet states and aborted photochemistry. Forming nπ* triplet states from ππ* singlets is a classical pathway for fluorescence quenching. In nitro-DPNDs, however, these ππ* and nπ* excited states are both singlets, and they are common for nitroaryl conjugates. Understanding the excited-state dynamics of such nitroaromatics is crucial for designing strongly fluorescent electron-deficient conjugates.

Dipyrrolonaphthyridinedione appended with para- or meta-nitrophenyl substituents exhibits strong fluorescence from a ¹ππ* S₁ state.     

Fluorimetric reaction-rate method for determination of mercury with 2,2′-dipyridylketone hydrazone

A simple and sensitive fluorimetric reaction-rate method for determination of mercury(II) (0.03-0.3 ppm), based on its catalytic effect on the autoxidation of 2,2′-dipyridylketone hydrazone, has been developed. The reaction is followed by the measurement of the rate of appearance of blue fluorescence (λ_ex = 359 nm, λ_em = 430 nm). The experimental variables and interferences in the determination are also reported.     

Insight into the strong aggregation-induced emission of low-conjugated racemic C6-unsubstituted tetrahydropyrimidines through crystal-structure–property relationship of polymorphs

Racemic C6-unsubstituted tetrahydropyrimidines (THPs) are a series of fluorophores with a strong aggregation-induced emission (AIE) effect. However, they do not possess the structural features of conventional AIE compounds. In order to understand their AIE mechanism, here, the influences of the molecular packing mode and the conformation on the optical properties of THPs were investigated using seven crystalline polymorphs of three THPs (1–3). The racemic THPs 1–3 have low-conjugated and highly flexible molecular structures, and hence show practically no emission in different organic solvents. However, the fluorescence quantum yields of their polymorphs are up to 93%, and the maximum excitation (λ _ex) and emission (λ _em) wavelengths of the polymorphs are long at 409 and 484 nm, respectively. Single-crystal structures and theoretical calculation of the HOMOs and LUMOs based on the molecular conformations of these polymorphs indicate that the polymorphs with the shortest λ _ex and λ _em values possess a RS-packing mode (R- and S-enantiomers self-assemble as paired anti-parallel lines) and a more twisted conformation without through-space conjugation between the dicarboxylates, but the polymorphs with longer λ _ex and λ _em values adopt a RR/SS-packing mode (R- and S-enantiomers self-assemble as unpaired zigzag lines) and a less twisted conformation with through-space conjugation between the dicarboxylates. The molecular conformations of 1–3 in all these polymorphs are stereo and more twisted than those in solution. Although 1–3 are poorly conjugated, the radiative rate constants (k _r) of their polymorphs are as large as conventional fluorophores (0.41–1.03 × 10⁸ s^–1) because of improved electronic conjugation by both through-bond and through-space interactions. Based on the obtained results, it can be deduced that the strong AIE arises not only from the restriction of intramolecular motion but also from enhanced electronic coupling and radiatively-favored inter-crossed local excitation (LE) and intramolecular charge transfer (ICT) excitation states. The abnormal molecular structures, easily-controllable self-assembly of the R- and S-enantiomers, and the strong AIE effect make THPs very useful fluorophores for applications and theoretical research.     

Studies on Simultaneous Fluorescence-Spectrophotometric Determination of Ultratrace Niobium(V), Tantalum(V), and Zirconium(IV) Using Partial Least-Squares Algorithm

In the presence of cetyltrimethylammonium bromide, a cationic surfactant, highly sensitive molecular fluorescence reactions occur between Nb(V), Ta(V), and Zr(IV) ions and morin (3, 5, 7, 2′, 4′-pentahydroxyflavone) in acidic medium to form stable ternary micellar complexes. Their λ_ex(max)/λ_em(max)values are 421.0/492.2, 416.2/489.6, and 424.2/507.8 nm, respectively, and their λ_em(max)values are 490.5, 488.6, and 507.2 nm, respectively, at the same fixed λ_exof 420.5 nm, indicating their seriously overlapping fluorescence excitation spectra and fluorescence emission spectra. The linear ranges of their regression calibration curves are 0 to 0.20, 0 to 0.50, and 0 to 0.20 mg/liter, respectively, with 0.5 ng/ml for all of sensitivities. The simultaneous molecular fluorescence-spectrophotometric determination of ultratrace or trace Nb(V), Ta(V), and Zr(IV) without separation was made using a partial least-squares (PLS) algorithm and other algorithms. The optimum PLS computation conditions are wavelength point number of 25 and corresponding wavelength range from 450 to 550 nm oriented from λ_em500 nm to two sides at combined intervals of 2.5 and 5.0 nm at a fixed λ_exof 420.5 nm with an optimum calibration sample number of 14 and respective optimum abstracted factor numbers of 6, 4, and 3. With respect to both accuracy and precision of the obtained results, the PLS algorithm is superior to the ordinary least-squares algorithm.