Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

All-inorganic lead halide perovskites are promising candidates for optoelectronic applications. However, fundamental questions remain over the component interaction in the perovskite precursor solution due to the limitation of the most commonly used solvents of N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Here, we report an interaction tailoring strategy for all-inorganic CsPbI_3−xBr_x perovskites by involving the ionic liquid solvent methylammonium acetate (MAAc). C=O shows strong interaction with lead (Pb²⁺) and N−H⋅⋅⋅I hydrogen bond formation is observed. The interactions stabilize the perovskite precursor solution and allow production of the high-quality perovskite films by retarding the crystallization. Without the necessity for antisolvent treatment, the one-step air-processing approach delivers photovoltaic cells regardless of humidity, with a high efficiency of 17.10 % along with long operation stability over 1500 h under continuous light illumination.     

Empirical parameters of lewis acidity and basicity for aqueous binary solvent mixtures

Empirical parameters of Lewis acidity, E^N_T, introduced by Reichardt et al., and Lewis basicity, B_KT , introduced by Kamlet and Taft, have been determined for mixtures of water with ten organic solvents. In the case of water/alcohol mixtures a distinct dependence between these acidity and basicity parameters have been found. For the other solvent mixtures the E^N_T on B_KT dependence is more complex even if these parameters are purified from non-specific solute/solvent interactions.     

Optical basicity scales in protic solvents: water, hydrogen fluoride, ammonia and their mixtures

In an inorganic material, a measure of the Lewis basicity of a solvent is commonly provided by the optical basicity, i.e. the ability of the solvent molecules to donate their electrons to an acidic species. This quantity is known to vary with the polarizability of the Lewis base. In protic solvents, the Lewis definition of basicity is barely used; it is replaced by the more purpose-built Br?nsted-Lowry scale, and its generalized variant proposed by Hammett. In this study, individual molecular polarizabilities were computed from first-principles for a series of protic solvents: pure water, hydrogen fluoride, ammonia and their mixtures. From these calculations optical basicity scales were set up for each Lewis base. It was shown that these scales correlate with the Hammett acidity. It is therefore possible to build a common optical basicity scale, in which any material (protic solvents, inorganic materials) can unambiguously be classified.     

Tailoring Component Interaction for Air‐Processed Efficient and Stable All‐Inorganic Perovskite Photovoltaic

All‐inorganic lead halide perovskites are promising candidates for optoelectronic applications. However, fundamental questions remain over the component interaction in the perovskite precursor solution due to the limitation of the most commonly used solvents of N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Here, we report an interaction tailoring strategy for all‐inorganic CsPbI_3?xBr_x perovskites by involving the ionic liquid solvent methylammonium acetate (MAAc). C=O shows strong interaction with lead (Pb²⁺) and N?H???I hydrogen bond formation is observed. The interactions stabilize the perovskite precursor solution and allow production of the high‐quality perovskite films by retarding the crystallization. Without the necessity for antisolvent treatment, the one‐step air‐processing approach delivers photovoltaic cells regardless of humidity, with a high efficiency of 17.10 % along with long operation stability over 1500 h under continuous light illumination.     

Anwendung von Klassifikationsverfahren zur Interpretation von Lösungsmitteleinflüssen auf EPR-Spektren

Use of Classification Methods to Interpret the Influence of Solvents on Parameters of EPR Spectra The influence of solvents on EPR spectra of Cu^II-Acetylacetonate (registered at room temperature) was investigated. The classification of mean values of the g-tensors and coupling constants using different clustering methods lead to groups of solvents which are related to the respective substance classes. The analysis of the relationship between EPR data and solvent parameters showed, that there exists a close relation between Lewis basicity of solvents and classification found by using clustering methods.     

钙钛矿材料制备中的溶剂配位效应

钙钛矿材料具有吸收系数大、载流子迁移率高、可溶液加工等特点,在太阳能电池、发光二极管、光电探测等领域具有潜在的应用价值。钙钛矿的光电性质与其维度、尺寸、形貌密切相关,因此研究材料的生长是实现高性能器件应用的基础。钙钛矿前驱体与溶剂之间的配位作用对钙钛矿的生长过程具有重要影响。本综述总结了钙钛矿前驱体与溶剂之间的配位作用对钙钛矿单晶、多晶薄膜、量子点三类体系制备的影响,讨论了在上述材料制备中的溶剂配位效应,特别是溶剂配位效应所形成的溶剂化物对材料生长过程,以及所制备的材料(形貌、晶相、缺陷、稳定性)的影响。最后,我们对这一研究方向存在的问题和挑战进行了分析和展望。     

Monodisperse Adducts-Induced Homogeneous Nucleation Towards High-Quality Tin-Based Perovskite Film

The classic solvent system can't sufficiently separate one-dimensional edge-sharing SnI₂ crystals in solution, which severely restricts the fabrication of high-quality tin-based perovskite film. Herein, a strong Lewis base (hexamethylphosphoramide, HMPA) has been introduced to coordinate Sn²⁺ to modulate solvation behaviours on perovskite precursor and regulate crystallization kinetics. The large molecular volume of HMPA and stronger bind energy of SnI₂ ⋅ 2HMPA (−0.595 eV vs −0.118 eV for SnI₂ ⋅ 2DMSO) change the solvation structure of SnI₂ from edge-sharing cluster to monodisperse adduct, which contributes to uniform nucleation sites and prolongs crystal growth process. Delightfully, a fully-covered perovskite film is formed on the large-area substrate and tin-based perovskite solar cells processed with HMPA exhibit an excellent efficiency of 13.46 %. This research provides novel insights and directions for the solution preparation of smooth and uniform large-area tin-based perovskite film.     

Spontaneous Crystallization of Perovskite Nanocrystals in Nonpolar Organic Solvents: A Versatile Approach for their Shape‐Controlled Synthesis

The growing demand for perovskite nanocrystals (NCs) for various applications has stimulated the development of facile synthetic methods. Perovskite NCs have often been synthesized by either ligand‐assisted reprecipitation (LARP) at room temperature or by hot‐injection at high temperatures and inert atmosphere. However, the use of polar solvents in LARP affects their stability. Herein, we report on the spontaneous crystallization of perovskite NCs in nonpolar organic media at ambient conditions by simple mixing of precursor–ligand complexes without application of any external stimuli. The shape of the NCs can be controlled from nanocubes to nanoplatelets by varying the ratio of monovalent (e.g. formamidinium⁺ (FA⁺) and Cs⁺) to divalent (Pb²⁺) cation–ligand complexes. The precursor–ligand complexes are stable for months, and thus perovskite NCs can be readily prepared prior to use. Moreover, we show that this versatile synthetic process is scalable and generally applicable for perovskite NCs of different compositions.     

Lights and Shadows of DMSO as Solvent for Tin Halide Perovskites

In 2020 dimethyl sulfoxide (DMSO), the ever-present solvent for tin halide perovskites, was identified as an oxidant for Sn^II. Nonetheless, alternatives are lacking and few efforts have been devoted to replacing it. To understand this trend it is indispensable to learn the importance of DMSO on the development of tin halide perovskites. Its unique properties have allowed processing compact thin-films to be integrated into tin perovskite solar cells. Creative approaches for controlling the perovskite crystallization or increasing its stability to oxidation have been developed relying on DMSO-based inks. However, increasingly sophisticated strategies appear to lead the field to a plateau of power conversion efficiency in the range of 10–15 %. And, while DMSO-based formulations have performed in encouraging means so far, we should also start considering their potential limitations. In this concept article, we discuss the benefits and limitations of DMSO-based tin perovskite processing.     

Coordination Chemistry Dictates the Structural Defects in Lead Halide Perovskites

We show the influence of species present in precursor solution during formation of lead halide perovskite materials on the structural defects of the films. The coordination of lead by competing solvent molecules and iodide ions dictate the type of complexes present in the films. Depending on the processing conditions all PbIS₅⁺, PbI₂S_4, PbI₃S₃^?, PbI₄S₂^2?, PbI₅S₂^3?, PbI₆^4?and 1D (Pb₂I₄)_n chains are observed by absorption measurements. Different parameters are studied such as polarity of the solvent, concentration of iodide ions, concentration of solvent molecules and temperature. It is concluded that strongly coordinating solvents will preferentially form species with a low number of iodide ions and less coordinative solvents generate high concentration of PbI₆^?. We furthermore propose that all these plumbate ions may act as structural defects determining electronic properties of the photovoltaic films.     

Enhanced Performance of Camphorsulfonic Acid-Doped Perovskite Solar Cells

High-quality perovskite film with large grains and therefore reduced grain boundaries plays a significant role in improving the power conversion efficiency (PCE) and ensuring good long-term stability of the perovskite solar cells. In this work, we found that adding camphorsulfonic acid (CSA), a Lewis base, to the perovskite solution results in the crystallization of larger perovskite grains. By varying the concentration of CSA, we found that the optimal concentration of the additive is 1 mg/mL, which leads to an 20% increase in PCE of the cells compared to the reference CSA-free cell. Interestingly, we observed that the PCE of cells with an excess of CSA was initially poor, but may increase significantly over time, possibly due to CSA migration to the hole-transporting layer, leading to an improvement in its conductivity.     

Lewis碱性混合萃取剂碱度的测定

提出一种利用萃取法间接测定Lewis碱性萃取剂碱度的简便方法, 选择常用的Lewis碱性萃取剂TOA/正辛醇和TRPO/煤油, 测定了其碱度, 为今后络合萃取剂的选择及其机理的研究提供理论指导.     

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure-Blue Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites are emerging as efficient emitters in blue perovskite light-emitting diodes (PeLEDs), while the imbalanced crystallization of the halide-mixed system limits further improvements in device performance. The rapid crystallization caused by Cl doping produces massive defects at the interface, leading to aggravated non-radiative recombination. Meanwhile, unmanageable perovskite crystallization is prone to facilitate the formation of nonuniform low-dimensional phases, which results in energy loss during the exciton transfer process. Here, we propose a multifunctional interface engineering for nucleation and phase regulation by incorporating the zwitterionic additive potassium sulfamate into the hole transport layer. By using potassium ions (K⁺) as heterogeneous nucleation seeds, finely controlled growth of interfacial K⁺-guided grains is achieved. The sulfamate ions can simultaneously regulate the phase distribution and passivate defects through coordination interactions with undercoordinated lead atoms. Consequently, such synergistic effect constructs quasi-2D blue perovskite films with smooth energy landscape and reduced trap states, leading to pure-blue PeLEDs with a maximum external quantum efficiency (EQE) of 17.32 %, spectrally stable emission at 478 nm and the prolonged operational lifetime. This work provides a unique guide to comprehensively regulate the halide-mixed blue perovskite crystallization by manipulating the characteristics of grain-growth substrate.     

Self-Driven Prenucleation-Induced Perovskite Crystallization Enables Efficient Perovskite Solar Cells

Perovskite film with high crystal quality is fundamental to achieving high-performance solar cells. A fast nucleation process is crucial to improving the crystallization quality. Here, we propose a self-driven prenucleation strategy to achieve fast nucleation. This is realized through rational solvent design. The key characteristics of different solvents are systematically evaluated. Among them, formamide, with ultra-high dielectric constant, low Gutman donor number, and a high boiling point, is selected as the co-solvent. These unique characteristics render formamide a double-face solvent that is a good solvent for formamidinium iodide (FAI) and CsI while a poor solvent for PbI₂. As a result, formamide induces the self-driven prenucleation of PbI₂-DMSO seeding crystals and accelerates the nucleation, improving the crystalline quality of perovskite film. The efficiency of the hole transport layer-free carbon-based perovskite solar cells is boosted beyond 19 % for the first time.     

A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells

Thin‐film photovoltaics based on alkylammonium lead iodide perovskite light absorbers have recently emerged as a promising low‐cost solar energy harvesting technology. To date, the perovskite layer in these efficient solar cells has generally been fabricated by either vapor deposition or a two‐step sequential deposition process. We report that flat, uniform thin films of this material can be deposited by a one‐step, solvent‐induced, fast crystallization method involving spin‐coating of a DMF solution of CH₃NH₃PbI₃ followed immediately by exposure to chlorobenzene to induce crystallization. Analysis of the devices and films revealed that the perovskite films consist of large crystalline grains with sizes up to microns. Planar heterojunction solar cells constructed with these solution‐processed thin films yielded an average power conversion efficiency of 13.9±0.7 % and a steady state efficiency of 13 % under standard AM 1.5 conditions.     

Composition-Controlled Synthesis of Hybrid Perovskite Nanoparticles by Ionic Metathesis: Bandgap Engineering Studies from Experiments and Theoretical Calculations

Herein a newly discovered non-polar solvent based synthesis of MAPbX₃ hybrid perovskite nanoparticles (NPs) is presented, where MA=Methylammonium and X=I, Br and Cl, as well as their mixed halide counterparts. The methodology proposed is simple and uses low-cost commercial precursors. The conventional method of hybrid perovskite preparation requires methylammonium halide precursors and highly polar solvents. Mandatory use of polar solvents and a particular perovskite precursor makes an intermediate compound which then requires a non-polar solvent to recover the NPs. In contrast here, a whole range of mixed halide perovskite NPs is fabricated without using a methylammonium halide precursor and a polar solvent. In this method, a non-polar solvent is used, which provides a better platform for the particle recovery. Organic cations on the nanoparticle surface prevent degradation from water, due to their hydrophobic nature, and hence offer a stable colloidal suspension in toluene for more than three months. Ab-initio calculations within density functional theory (DFT) predict lower formation energies compared to previously reported values, confirming better chemical stability for this synthesis pathway. Through the halide compositional tuning, these NPs exhibit a variety of emission and absorption starting from ultraviolet to near infrared (IR). The absorption spectra of various halide perovskite show a sharp band edge over the visible wavelength with high absorption coefficient. High oscillator strengths due to high excitonic binding energies combined with the simulated finite dipole transition probabilities point towards the observed high absorption. The emission spectra of mixed halide perovskites vary from 400 to 750 nm, which covers the whole range of visible spectra with sharp full-width at half maxima. Different halide perovskite exhibit average recombination lifetime from 5 to 227 ns. Ambient synthesis, chemical robustness and tunability of emission with varying halide compositions make MAPbX₃ (X=I, Br and Cl) NPs appealing for the optoelectronic applications.     

锡钙钛矿太阳能电池的进展与展望

金属卤素钙钛矿是目前最有前景的高效低成本新型太阳能电池材料,但是目前还存在环境友好性和理论效率极限较低的问题。锡钙钛矿环境友好,而且其带隙更窄理论转换效率更高,吸引了广泛的关注。锡钙钛矿太阳能电池(TPSC)近年来发展迅速,是目前效率最高的无铅钙钛矿太阳能电池。本文先介绍了锡钙钛矿的晶体结构、能带结构和光电性质,然后总结了最近在锡钙钛矿领域有代表性的工作和提高光电转化效率的策略,最后讨论了锡钙钛矿发展面临的挑战和未来的发展方向。     

Dimethylammonium Cation-Induced 1D/3D Heterostructure for Efficient and Stable Perovskite Solar Cells

Mixed-dimensional perovskite engineering has been demonstrated as a simple and useful approach to achieving highly efficient and more-durable perovskite solar cells (PSCs), which have attracted increasing research interests worldwide. In this work, 1D/3D mixed-dimensional perovskite has been successfully obtained by introducing DMAI via a two-step deposition method. The additive DMA⁺ can facilitate the crystalline growth and form 1D DMAPbI₃ at grain boundaries of 3D perovskite, leading to improved morphology, longer charge carrier lifetime, and remarkably reduced bulk trap density for perovskite films. Meanwhile, the presence of low-dimension perovskite is able to prevent the intrusion of moisture, resulting in enhanced long-term stability. As a result, the PSCs incorporated with 1D DMAPbI₃ exhibited a first-class power conversion efficiency (PCE) of 21.43% and maintained 85% of their initial efficiency after storage under ambient conditions with ~45% RH for 1000 h.     

Bulk Mn2+ Doped 1D Hybrid Lead Halide Perovskite with Highly Efficient,Tunable and Stable Broadband Light Emissions

Mn²⁺ doped colloidal three-dimensional (3D) lead halide perovskite nanocrystal (PNC) has attracted intensive research attention; however, the low exciton binding energy and fatal optical instability of 3D PNC seriously hinder the optoelectronic application. Therefore, it remains significant to explore new stable host perovskite with strongly bound exciton to realize more desirable luminescent property. In this work, we utilized bulk one-dimensional (1D) hybrid perovskite of [AEP]PbBr₅ ⋅ H₂O (AEP=N-aminoethylpiperazine) as structural platform to rationally optimize the luminescent property by a controllable Mn²⁺ doping strategy. Significantly, the series of Mn²⁺-doped 1D [AEP]PbBr₅ ⋅ H₂O show enhanced energy transfer efficiency from the strongly bound excitons of host material to 3d electrons of Mn²⁺ ions, resulting in tunable broadband light emissions from weak yellow to strong red spectral range with highest photoluminescence quantum yield up to 28.41 %. More importantly, these Mn²⁺-doped 1D perovskites display ultrahigh structural and optical stabilities in humid atmosphere, water and high temperature exceeding the conventional 3D PNC. Combined highly efficient, tunable and stable broadband light emissions enable Mn²⁺-doped 1D perovskite as excellent down-converting phosphor showcasing the potential application in white light emitting diode. This work not only provides a profound understanding of low-dimensional perovskites but also opens a new way to rationally design high-performance broadband light emitting perovskites for solid-state lighting and displaying devices.     

二维有机-无机杂化钙钛矿铁电材料的研究进展

铁电性通常是指电介质材料的自发极化取向随着外加电场发生变化的性能.以自发极化为核心,铁电材料表现出优异的介电响应、热释电性、压电性、电光效应和非线性光学效应等,是一类具有广阔应用前景的功能材料.近年来,二维有机-无机杂化钙钛矿化合物在铁电研究领域崭露头角,逐渐发展为铁电材料的重要组成部分.此类材料具有独特的结构兼容性与...