Evaluation of the fuel cell performances of TiO2/PAN electrospun carbon-based electrodes

Electrocatalytic effect of the untreated and TiO₂+polyacrylonitrile (PAN) modified discarded battery coal (DBC) and pencil graphite electrodes (PGE) were evaluated in fuel cell (FC) applications. TiO₂+PAN solution is coated on PGE and DBC electrodes by electrospinning. According to the FESEM and EDS characterizations, TiO₂ and PAN nanofibers are found to be approximately 40 and 240 nm in size. TiO₂+PAN/PGE showed the best FC performances with 2.00 A cm^–2 current density and 5.05 W cm^–2 power density values, whereas TiO₂+PAN/DBC showed 0.68 A cm^–2 current density and 0.62 W cm^–2 power density values. Electrochemical characterizations of PGE and TiO₂+PAN/PGE electrodes were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Finally, long-term FC measurement results of developed electrodes exhibited very reasonable recovery values. Along with the comparison of the electrode performances, the recovery of DBCs as electrodes for renewable energy production has been achieved.     

Preparation and Supercapacitive Performance of Lead Dioxide Electrodes with Three-Dimensional Porous Structure

The three-dimensional porous structure PbO₂ electrodes (3D-PbO₂ electrodes) were prepared in the lead nitrate solution by potentiostatically electrodeposition method using oxygen bubble as dynamic template, which can be used as the positive materials of the supercapacitors. The morphology and structure of 3D-PbO₂ electrodes were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The supercapacitive performance of 3D-PbO₂ electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge-discharge tests (GCD) and electrochemical impedance spectroscopy (EIS). The specific capacitance of 3D-PbO₂ electrodes can reach 195.6 F g^–1 at 0.2 A g^–1, which is 2.8 times higher than that of Flat-PbO₂ electrodes (68.8 F g^–1). The charge transfer resistance (R_ct) of 3D-PbO₂ electrodes (8.21 Ohm cm^–2) is lower than that of Flat-PbO₂ electrodes (21.32 Ohm cm^–2). The excellent supercapacitive performance of 3D-PbO₂ electrodes can be attributed to the three-dimensional porous structure, which can enlarge the active surface area of lead dioxide electrodes and promote the electrolyte diffusion and electrons propagation.     

High electro-catalytic graphite felt/MnO<Subscript>2</Subscript> composite electrodes for vanadium redox flow batteries

A mild and simple synthesis process for large-scale vanadium redox flow batteries (VRFBs) energy storage systems is desirable. A graphite felt/MnO₂ (GF-MNO) composite electrode with excellent electrocatalytic activity towards VO²⁺/VO₂⁺ redox couples in a VRFB was synthesized by a one-step hydrothermal process. The resulting GF-MNO electrodes possess improved electrochemical kinetic reversibility of the vanadium redox reactions compared to pristine GF electrodes, and the corresponding energy efficiency and discharge capacity at 150 mA cm^?2 are increased by 12.5% and 40%, respectively. The discharge capacity is maintained at 4.8 A h L^?1 at the ultrahigh current density of 250 mA cm^?2. Above all, 80% of the energy efficiency of the GFMNO composite electrodes is retained after 120 charge-discharge cycles at 150 mA cm^?2. Furthermore, these electrodes demonstrated that more evenly distributed catalytic active sites were obtained from the MnO₂ particles under acidic conditions. The proposed synthetic route is facile, and the raw materials are low cost and environmentally friendly. Therefore, these novel GFMNO electrodes hold great promise in large-scale vanadium redox flow battery energy storage systems.     

Electron transfer kinetics on composite diamond (sp3)–graphite (sp2) electrodes

The concept of non-diamond sp² impurity states as charge transfer mediators on boron-doped diamond (BDD) surface was suggested as an explanation for the electrochemical behavior of synthetic diamond based electrodes. In order to verify this concept, graphite particles (sp²) were deposited on diamond electrodes (sp³) by mechanical abrasion. The behavior of the so prepared diamond–graphite composite electrodes were compared with those of as-grown (BDD_ag) and those after mild anodic polarization (BDD_mild).Outer-sphere electron transfer processes such as ferri/ferrocyanide (Fe(CN)₆III/II) and inner-sphere charge transfer reactions such as 1,4-benzoquinone/hydroquinone (Q/H₂Q) were chosen in order to investigate the electrochemical properties of these composite electrodes. Both redox systems became more reversible as the graphite (sp²) loading increased. A strong analogy existed between as-grown diamond electrodes and diamond–graphite composite electrodes.Finally a model is proposed which describes the BDD electrode surface as a diamond matrix in which non-diamond (sp²) impurity states are dispersed. These non-diamond sp² states on BDD surface acts as charge mediators for both inner-sphere and outer-sphere reactions.     

Electrochemical Condensation of Methylviologen on Specifically‐adsorbed Anion Layers

The adsorption of methylviologen dications (MV²⁺) on single‐crystalline Au electrodes in both H₂SO₄ and HClO₄ was examined. MV²⁺ strongly interacted with sulfate and bisulfate anions adsorbed on the Au(111) electrode surface in 0.05 M H₂SO₄ under a controlled potential of 1.25 V vs. the reversible hydrogen electrode (RHE). A characteristic non‐Faradaic current was observed at 1.10 V vs. RHE. When adsorption of MV²⁺ was carried out in 0.1 M HClO₄, the electrochemical response of MV²⁺ was less than that obtained in H₂SO₄. The results show that the formation of a highly ordered sulfate/bisulfate adlayer plays an important role in the formation of condensed MV²⁺ layers. Examination of polycrystalline Au and Au(100) electrodes revealed a poor electrochemical response due to the surface roughness of the Au substrate, but the electrochemical detection was applicable to polycrystalline Au electrodes. A systematic investigation of the structural dependency of viologen derivatives showed that molecular size is important for electrostatic interactions with a highly ordered sulfate/bisulfate adlayer. The findings of the present study demonstrate successful detection of MV²⁺ at a concentration of ≤1 pM with a non‐Faradaic current.     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。     

Electrocatalytic studies of covalently immobilized metal tetra-amino phthalocyanines onto derivatized screen-printed gold electrodes

Metal tetra-amino phthalocyanine complexes (MTAPc; where M is Co or Mn) were immobilized on screen-printed gold electrodes pre-modified with monolayers of benzylamino groups. The functionalized electrodes were then activated using benzene-1,4-dicarbaldehyde as a linker before MTAPc complexes were immobilized. The surface coverages for the modified electrodes confirmed the perpendicular orientation of the MTAPcs. The apparent electron transfer constant (k_app) for the electrodes is 2.2?×?10^?5 cm.s^?1 for both CoTAPc and MnTAPc modified electrodes as calculated with data from impedance measurements. The k_app values for the bare and benzylamino modified electrodes were found to be 1.2?×?10^?4 cm.s^?1 and 4.9?×?10^?6 cm.s^?1, respectively. The electrocatalysis of the modified electrodes towards detection of H₂O₂ gave significant peak current densities and electrocatalytic potentials at ?0.28 V and ?0.31 V for the MnTAPc and CoTAPc modified electrodes, respectively.     

银负载量对网状TiO2柔性薄膜电极储锂性能的影响

本工作采用水热法结合银镜反应制备出一系列不同Ag负载量（2.2%、4.0%、6.4%,w/w）改性的3D纳米网状结构Ag@TiO₂薄膜电极。利用电感耦合等离子体技术（ICP）、X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）和X射线能谱（EDX）等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在TiO₂纳米线表面。电化学测试数据则表明,4.0%（w/w）负载量的Ag@TiO₂相比于未改性和其他负载量的TiO₂纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 mA·g^-1的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 mAh·g^-1,在200 mA·g^-1下循环80次后容量保持率仍能达到99.8%。     

Thermodynamics of solid-state connected ion-sensitive membrane electrodes: The silver-silver chloride system: Part I. Standard potential EM0 at 25, 50, and 75°C

Standard potentials E_M⁰ at 25, 50 and 75°C of all-solid-state silver-silver chloride ring membrane electrodes (Schott) with pressed-in silver foil have been measured with respect to the Pt, H₂ electrode by means of a cell without transference (see also [1]) applied earlier by Bates and Bower who measured standard potentials E⁰ of corresponding electrodes of the 2nd kind. The data evaluated by the extended Debye-Hückel theory can directly be compared with the reported 2nd kind electrode data. Identical thermodynamic behavior of both electrode types is observed; small differences (<1.5 mV) of standard potentials and their temperature dependence are discussed on the basis of different states of electrode materials orignating from different electrode preparation and are applied to calculate thermodynamic data of membrane electrodes referred to those of electrodes of the 2nd kind. The results and contradictory literature data are discussed. A brief characterization of membrane and 2nd kind electrodes is given.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Submerged Arc Breakdown of Methylene Blue in Aqueous Solutions

Low voltage, low energy submerged pulsed arcs between a pair of carbon or iron electrodes with a pulse repetition rate of 100?Hz, energies of 2.6?C192?mJ and durations of 20, 50 and 100???s were used to remove methylene blue (MB) contamination from 30?ml aqueous solutions. The MB concentration decreased exponentially with rates of 0.0006?C0.0143?s^?1 during processing with the carbon electrode pair. With the iron electrodes, the MB concentration initially decreased faster (0.030?s^?1) than with the carbon electrodes, but later saturated. However when microparticles produced with the iron electrodes were periodically filtered, the high removal rate was maintained. Under these conditions, the volume of water which can be treated per unit energy expenditure was much higher with the submerged arc than with other plasma processes. A kinetic model based on MB degradation by OH· radicals formed by the discharge was formulated. The higher initial MB removal rate with iron electrodes is explained by additional OH· production from Fenton??s reaction between Fe⁺⁺ and H₂O₂ produced by the discharge. This rate is maintained if the eroded iron particles are filtered, but if eroded iron particles accumulate, degradation slows down and stops, possibly because the iron particles catalytically decompose H₂O₂ and hence stops Fenton??s reaction, and either directly or via increased Fe⁺⁺ dissolved from the particles, scavenge the OH· radicals.     

Iodide‐Selective Electrodes Based on Bis[N(2‐methyl‐phenyl) 4‐Nitro‐thiobenzamidato]mercury(II) and Bis[N‐phenyl 3,5‐Dinitro‐thiobenzamidato]mercury(II) Carriers

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on recently synthesized mercury complexes including Hg(Nmpntb)₂ and Hg(Npdntb)₂ as new carriers for iodide‐selective electrodes by incorporating the membrane ingredients on the surface of graphite electrodes are reported. The effect of various parameters including the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses toward iodide over a wide concentration range of 7×10^?7 to 0.1 M and 1×10^?6 to 0.1 M, with slopes of 59.6±0.8 and 58.9±0.9 mV per decade of iodide concentration and detection limit of 3×10^?7 M and 7×10^?7 for Hg(Npdntb)₂ and Hg(Nmpntb)₂, respectively, over a wide pH range of 3–11. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show good ability to discriminate iodide over several inorganic and organic anions. The electrodes were successfully applied to direct determination of iodide in synthetic mixture, waste water and drinking water and as indicator electrodes in precipitation titrations.     

Lithium insertion into titanium dioxide (anatase) electrodes: microstructure and electrolyte effects

Insertion characteristics of anatase electrodes were studied on single-crystal and polycrystalline electrodes of different microstructures. The lithium incorporation from propylene carbonate solution containing LiClO₄ and Li(CF₃SO₂)₂N was studied by means of cyclic voltammetry (CV), the quartz crystal microbalance (QCM) and the galvanostatic intermittent titration technique (GITT). The electrode microstructure affects both the accessible coefficient x and the reversibility of the process. The highest insertion activity was observed for electrodes composed of crystals with characteristic dimensions of ∼10^–8 m. The insertion properties deteriorate for higher as well as for smaller crystal sizes. Enhanced insertion was observed in Li(CF₃SO₂)₂N-containing solutions. Lithium insertion is satisfactorily reversible for mesoscopic electrodes; the reversibility in the case of compact polycrystalline and single-crystal electrodes is poor. The reversibility of the insertion improves with increasing electrolyte concentration. The lithium diffusion coefficient decreases with increasing x and ranges between 10^–15 and 10^–18 cm² s^–1. Electronic Publication     

Determination of hemoglobin at a novel NH2/ITO ion implantation modified electrode

A novel electrode was prepared by implanting NH₂ ⁺ into an ITO film (NH₂/ITO). Gold nanoparticles were deposited on the surface of NH₂/ITO electrode. The NH₂/ITO and Au/NH₂/ITO electrodes were used to determine hemoglobin (Hb) immobilized on the electrodes surfaces. The relationship of the reductive peak current value of Hb among different electrodes was: Hb/ITO:Hb/Au/ITO:Hb/NH₂/ITO:Hb/Au/NH₂/ITO=1:1.5:2:4. The linkage between the –NH₂ implanted into ITO film and the –COOH of Hb was recognized to be the reason for the increase of active Hb coverage on NH₂/ITO electrode compared with the ITO electrode. Increase of active Hb coverage on Au/NH₂/ITO compared with Au/ITO was attributed to the different amount of gold nanoparticles deposited. The determination of Hb at an Au/NH₂/ITO electrode was optimized. Calibration curve was obtained over the range of 1.0 × 10⁻⁸ – 1.0 × 10⁻⁶ mol · L⁻¹ with a detection limit of 1.0 × 10⁻⁸ mol · L⁻¹. Results showed that the novel NH₂/ITO and Au/NH₂/ITO electrodes exhibited good stability, reproducibility besides better electrochemical performance. Correspondence: Jing Bo Hu, Department of Chemistry, Beijing Normal University, Beijing 100875, China     

Investigation of Silver(I) Ion Sensing Property of Ruthenium(II) Thiosemicarbazone Complex Using Coated Graphite and Polymeric Membrane Electrodes

A ruthenium(II) complex [Ru(PPh₃)₂(pytsc)₂] {Hpytsc = pyridine‐2‐carbaldehydethiosemicarbazone, (C₅H₅N)C²(H)=N³‐N²(H)‐C¹(=S)N¹H} has been used as an ion carrier for the selective determination of silver(I) ions in solution. Silver(I) ion‐selective coated graphite based (CGE) and PVC polymeric membrane based (PME) electrodes exhibit Nernstian slope for silver(I) ions over a wide concentration range from 1.0 × 10⁻¹ M to 5.0 × 10⁻⁶ M (with CGE) and 1.0 × 10⁻¹ M to 2.0 × 10⁻⁵ M (with PME). The working pH range of these electrodes has been found to be from 1.2 to 7.2 for CGE and 2.2 to 6.5 for PME. The proposed CGE sensor exhibits better analytical features like sensitivity and selectivity towards different secondary ions in comparison to the corresponding PME with no interference from mercury(II) ions . These electrodes also act as indicator electrodes in potentiometric titration and have been successfully used for the determination of silver content in solution of real samples (1 gm dissolved in 100 mL of dilute nitric acid) such as silver ornaments and thin silver foils. Silver content determined by the use of ion selective electrode was found to vary in the concentration range from 1.20 x 10⁻² M to 7.45 x 10⁻² M and results were found to be comparable with those obtained from the traditional volumetric method of analysis. It is the first report of a metal‐ligand complex used as an ion carrier in ion selective electrode, which is selective for a metal ion other than the one used in the complex.     

PVC membrane electrode based on triheptyl dodecyl ammonium iodide for the selective determination of molybdate(VI)

Novel polyvinyl chloride (PVC) membrane electrodes based on triheptyl dodecyl ammonium iodide have been developed. In the presence of 12.5 mM H₂O₂, these electrodes are capable of determining molybdate(VI) ion. The electrodes exhibit near-Nernstian responses over a wide concentration range (2.0 × 10⁻⁶ to 5.0 × 10⁻³ M). The proposed electrodes demonstrate satisfying selectivity for molybdate(VI) ion in the presence of a wide variety of anions other than iodide, and can be used in the pH range 5.0-7.0. Moreover, the electrodes show an average response time of 2-3 min and can be used over a period of 2 months without any significant deviation being observed. In the light of our results, the response mechanism of the electrode is discussed and HMoO₂(O₂)₂⁻ is suggested as the response ion. The proposed electrode has been used to measure molybdenum in ore samples, and the results were in agreement with those obtained by means of ICP analysis.     

A Polyaniline-Deposited Nonplatinum Metal as a Potentiometric Sensor—An Inexpensive Alternate to Conventional Platinum for Some Potentiometric Redox Reactions

For the purpose of employing an inexpensive alternative to conventional platinum for use by upper-division as well as graduate students, polyaniline (PANI)-deposited stainless steel (SS) and mild steel (MS) electrodes are described as indicator electrodes for potentiometry and potentiometric titrations of some redox reactions. PANI is deposited on the nonplatinum metal by electrochemical polymerization of aniline using cyclic voltammetric technique. Alternate methods to produce the PANI electrodes are also suggested. The electrodes respond to concentration changes of hydroquinone (H₂O), Fe²⁺/Fe³⁺, and [Fe(CN)₆]^4–/[Fe(CN)₆]^3– in HCL electrolytes, and the potential variation with concentration follows the Nernst relationship. Under identical experimental conditions, the response time of the PANI/SS, PANI/MS, and Pt electrodes for a change in concentration of Fe³⁺ in a mixed electrolyte of Fe²⁺ and Fe³⁺ is found to be about 20 s. Neutralization reaction of HC1 versus NaOH, redox reaction of Fe²⁺ and Ce⁴⁺, and redox reaction of Fe²⁺ and KMnO₄ in several concentrations in the range from 1 mM to 100 mM are carried out using the PANI/SS, PANI/MS, and Pt indicator electrodes. The performance of the PANI/SS and PANI/MS electrodes is as good as that of the Pt at all concentration levels of the titrations. The electrodes can be reused for several titrations by storing them in an acid electrolyte for a long period of time. Thus, the conventional inert Pt or Au can be substituted for by using a PANI-deposited nonplatinum reactive metal as a potentiometric sensor for redox titrations.     

Study on the electrocatalytic degradation of 4-chlorophenol on PbO<Subscript>2</Subscript>–ZrO<Subscript>2</Subscript> composite electrode and its electrochemical property

PbO₂–ZrO₂ composite electrodes were prepared by anodic electrodeposition in the lead nitrate solution. The electrochemical property of this electrode was studied by cyclic voltammetry, polarization curves and open-circuit potential–time curves. The results show that PbO₂–ZrO₂ composite electrodes possess higher oxygen evolution overpotential and better anti-corrosion performance than traditional PbO₂ electrodes. Electrocatalytic oxidation of 4-chlorophenol (4-CPs) in aqueous solution was studied to evaluate the applications of this electrode in environmental protection. The influence of experimental parameters on the COD removal efficiency was studied on PbO₂–ZrO₂ composite electrodes as a function of the current density, initial concentration of the 4-CPs, initial pH, supporting electrolyte concentration and electrolysis time. The results show that the 4-CPs removal efficiency in 0.1 mol L^–1 Na₂SO₄ solution containing 8 mmol L^–1 4-CPs could reach 89.2% with the current density at 200 mA cm^–2 and pH value at 6.5 after 4 h. Compared with traditional PbO₂ anodes, the PbO₂–ZrO₂ composite electrodes show higher instantaneous current efficiency with degradation of 4-CPs. The experimental results demonstrate that the PbO₂–ZrO₂ composite electrodes possess the excellent electrocatalytic activity in refractory pollutants degradation.     

Electrochemical behavior of glassy carbon electrodes modified by electrochemical oxidation

Glassy carbon electrodes were modified electrochemically by pretreatment in sulfate, phosphate or carbonate solutions by means of cycling the potential well into the positive limit of the solvent. Electrodes treated in this manner were then used to incorporate and concentrate a variety of redox species that were either cations or aromatic containing compounds, including Ru(bpy)²⁺₃, Ru(NH₃)³⁺₆, Cu(NH₃)²⁺₄, ferrocene, methylviologen, 1,4-benzoquinone, anthraquinone-2-sulfonate, riboflavin, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD). Surface-equivalent concentrations ranged from 5 × 10^?9 to 1 × 10^?7 mol cm^?2 for electrodes pretreated for 10 min in sulfuric acid. An E_1/2 vs. pH study of 1,4-benzoquinone, riboflavin, FMN and FAD in modified electrodes shows that the pK_a values shift toward higher pH (nearly 2 pH units). Results concerning the incorporation of redox compounds detected only by mediation with other electroactive complexes and the study of the modified electrodes in electrocatalysis are also discussed.