Synthesis of Cobalt Bis(Dicarbollide)—Curcumin Conjugates for Potential Use in Boron Neutron Capture Therapy

A series of novel cobalt bis(dicarbollide)—curcumin conjugates were synthesized. Two conjugates were obtained through the nucleophilic ring-opening reaction of the 1,4-dioxane and tetrahydropyran derivatives of cobalt bis(dicarbollide) with the OH group of curcumin, and using two equiv. of the oxonium derivatives, two other conjugates containing two cobalt bis(dicarbollide) units per molecule were obtained. In contrast to curcumin, the conjugates obtained were found to be non-cytotoxic against both tumor and normal cell lines. The analysis of the intracellular accumulation of the conjugates by flow cytometry showed that all cobalt bis(dicarbollide)—curcumin conjugates entered HCT116 colorectal carcinoma cells in a time-dependent manner. New non-cytotoxic conjugates contain a large amount of boron atoms in the biomolecule and can potentially be used for further biological research into boron neutron capture therapy (BNCT).     

Bis(hydroxyamino)triazines: versatile and high-affinity tridentate hydroxylamine ligands for selective iron(III) chelation

A new versatile family of chelating agents based on bis(hydroxyamino)-1,3,5-triazines, BHTs, is described. The properties of different BHT ligands are determined by electrochemistry, spectroscopy and titrimetry revealing high redox stability, transparency in the visible range, and diprotic acid-like behaviour in the 5-9 pH range. The iron(III) and iron(II)-BHT complexes were studied revealing high affinity of BHTs to iron(III). Electrochemical studies show exceptional preference of the BHT ligands to iron(III) over iron(II), this, in addition to their small size and their fast and reversible electrochemistry makes them potentially useful electrochemical redox couples for the low end of the aqueous potential window (<0.6 V, vs. NHE). The synthetic versatility of the new ligands allows easy tuning of the hydrophobicity, redox potential, and to some extent the stability constant of the complexes by alteration of the peripheral groups appended to the BHTs.     

Redox potential modulation in mixed sandwich pyrrolyl/ dicarbollide complexes

Carbon cluster (C(c)) substituents have been shown to be of essential importance in C(c).C(c) distance, rotational energy barriers, and (11)B[(1)H] NMR chemical shift values in mixed pyrrolyl/dicarbollide cobalt complexes. In the present work, the influence of electronic properties of exo-cluster substituents upon redox potential values associated to the metallic central atom in mixed pyrrolyl/dicarbollide and dimethylpyrrolyl/dicarbollide cobalt complexes is discussed. With that purpose, two new neutral sandwich species, closo-[3-Co(eta(5)-NC(4)(CH(3))(2)H(2))-1,2-(C(6)H(5))(2)-1,2-C(2)B(9)H(9)] (2) and closo-[3-Co(eta(5)-NC(4)(CH(3))(2)H(2))-1-CH(3)-2-SCH(3)-1,2-C(2)B(9)H(9)] (3), have been synthesized and characterized by (1)H, (11)B, (11)B[(1)H], and (13)C[(1)H] NMR and IR spectroscopies, elemental analysis, and X-ray diffraction analysis. The redox potential (E(1/2)) of these complexes has been measured in nonpolar media and compared to values obtained for previously reported mixed complexes, incorporating alkyl, phenyl, thiophenyl, and thiomethyl exo-cluster substituents. The potential shift arising from the effect of these substituents has been discussed in terms of individual and average contribution. This last point is in the case of two identical substituting groups placed on both C(c) atoms, in which the contribution of the second introduced substituent has shown to be lower than that for the first one. The potential shift arising from the presence of methyl units on the pyrrolyl anion has also been determined.     

富勒烯C_(36)等电子体C_(34)BN异构体的结构及其相对稳定性理论研究

用半经验的AM1和MNDO方法优化了富勒烯C_(36)的等电子体C_(34)BN所有可能 异构体的构型,分析了各异构体相对稳定性与杂原子取代位置间的关系。另外,比 较了C_(36)碳笼上同位置地取代杂原子形成的C_34BN,C_(34)B_2和C_(34)N_2间的 电子结构,并分析了C_(34)BN最稳定异构体的振动模型。结果表明以C_(36):A (D_(6h))为母体形成的最稳定C_(34)BN异构体对应于碳笼赤道位置六元环中1,4- 取代产物,而以C_(36):B(D_(2d))为母体形成的最稳定C_(34)BN异构体对应于碳笼 近赤道位置的1,2-取代产物.C_(34)BN各异构体的稳定性可能主要由体系的共轭性 质决定。前线轨道能级表明B,N原子取代所得异构体的氧化-还原活性按以下顺序 递增：C_(34)B_2相似文献   

Synthesis, structures, and conductivities of salts (BEDT-TTF)[9,9′(12′)-I2-3,3′-Co(1,2-C2B9H10)2] and (TTF)[9,9′,12,12′-I4-3,3′-Co(1,2-C2B9H9)2]

The radical cation salts of tetrathiafulvalene (TTF) and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) with iodo derivatives of cobalt bis(dicarbollide), (TTF)[9,9′,12,12′-I₄-3,3′-Co(1,2-C₂B₉H₉)₂] and (BEDT-TTF)[9,9′(12′)-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂], respectively, were synthesized and their crystal structures were determined. The introduction of iodine atoms into the lower rim of the dicarbollide ligands, unlike the substitution at the upper rim, leads to insignificant changes in the crystal structure and the conductivity of the radical cation salts compared to the analogous salts based on unsubstituted cobalt bis(dicarbollide).     

Synthesis of cobalt bis(dicarbollide) conjugates with natural chlorins by the Sonogashira reaction

Novel boron-containing conjugates based on the alkynylated cobalt bis(dicarbollide) anion and chlorin e ₆ and purpurinimide p-iodophenyl derivatives were synthesized by the Sonogashira reaction. These conjugates can accumulate in the cancer cell cytoplasm and can be considered as potential candidates for using in boron neutron capture therapy of tumors.     

Oxidation of 2-mercaptobenzoxazole in aqueous solution: solid phase formation at glassy carbon electrodes

The redox reactions of 2-mercaptobenzoxazole (MBO) have been investigated by cyclic voltammetry at glassy carbon electrodes in aqueous solution. Four anodic and three cathodic processes could be identified. A more detailed analysis of the oxidation processes up to a potential of +0.6 V (SCE) and the corresponding reduction signals showed that the oxidation leads to bis(benzoxazolyl) disulfide (BBOD). Owing to its low solubility, the oxidation product remains at the electrode surface. This product has been identified by ex situ FTIR and XPS analysis. During the reduction of BBOD, mainly MBO is formed. The remarkable lower solubility of BBOD in aqueous solutions compared to MBO allows preparation of layers of BBOD in situ and to control the amount of deposited BBOD via the MBO solution concentration and electrolysis time. The peak potential and peak shape of the reduction signals change remarkably as the amount of BBOD increases from submonolayer coverage to coverages that correspond to multilayers. The behavior can be explained by assuming an electrochemical conversion of BBOD microcrystals, which are deposited on the electrode surface, if the amount of BBOD formed during the MBO oxidation exceeds one monolayer. Received: 21 January 1999 / Accepted: 15 March 1999     

Electrochemical immobilization of redox active molecule based ionic liquid

The electrochemical immobilization of redox active molecule based ionic liquid onto glassy carbon electrode has been performed. 1-Nitrophenylethyl-3-methylferrocenylimidazolium bis(trifluoromethylsulfonyl)imide was synthesized and characterized by electrochemistry showing the presence of two redox couples. Following that, the electrochemical reduction of this molecule in acidic media containing sodium nitrite leads to the in situ formation of the corresponding diazonium, in the vicinity of the electrode, and subsequently the grafting of redox based ionic liquid molecule onto the electrode surface. The surface analysis of the attached layer confirms the formation of organic thin film strongly attached to the electrode surface, and evidences the presence of the components of the imidazolium ring, ferrocenyl unit, and TFSI anion. In addition, the modified electrode was electrochemically characterized by following the electrochemical signal of the attached ferrocenyl unit. Finally, the electrochemical reversible wettability of the modified electrode upon oxidation and reduction process was demonstrated.     

Effect of Fluoride Atoms on the Electrochemical Performance of Tetracyanoquinodimethane(TCNQ) Electrodes in Zinc-ion Batteries

Tetracyanoquinodimethane (TCNQ) electrode material has achieved excellent performance in aqueous zinc-ion batteries (AZIBs). However, fundamental understanding about effect of substitutes on electrochemical performance of TCNQ remain unknown. In this work, the effects of fluorine (F) as an electron-absorbing group on the structure, morphology and electrochemical performance of TCNQ and storage mechanism of TCNQ in AZIBs are discussed. Theoretical calculation proves that the introduction of fluorine atoms decreases lowest unoccupied molecular orbital (LUMO) energy of TCNQ thus affect the redox potential. Electrochemical performance of TCNQ/Fluoro-7,7,8,8-tetracyanoquinodimethane (FTCNQ)/2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄TCNQ) is evaluated from 25 °C to −20 °C in AZIBs. Results tend out that with the increasing substituents of F on TCNQ molecular, their stability in AZIBs decrease. Dipole moment calculation further shows that the introduction of fluorine atoms is inconducive to the stability of the electrode material in aqueous solution. Ex-situ characterization demonstrate that electron withdrawing groups do not change the REDOX center of TCNQ electrode materials. Our work provides a new thought for the selection of the electrode material in AZIBs.     

Tetrahedral boron chemistry for the preparation of highly efficient "cascatelle" devices

The replacement of the two fluorine atoms on the boron center of the well-known Bodipy fluorophore by functionalized acetylenic groups opens the way to a new family of highly luminescent, redox active, and stable fluorophores termed "E-Bodipy" species. The substitution is effective for ethynyl-lithium reagents incorporating tolyl, naphthyl, pyrenyl, fluorenyl, and terpyridinyl units. The protocol also tolerates the presence of various functional groups in the dipyrromethene meso position such as pyrene, phenylethynylpyrene, 4'-terpyridine, and iodophenyl. The last of these is particularly useful for a further coupling reaction enabling introduction of a flexible arm bearing a succinimidyl unit reactive toward primary amines. X-ray structure determinations of two E-Bodipy compounds confirm the introduction of the ethynyl units and show the boron atoms to have a distorted tetrahedral environment, with B-C(ethynyl) approximately 1.59 A and both boron atoms lying essentially in the mean planes of the dipyrromethene units. All the new compounds show intense electronic absorption bands (epsilon 60,000-70,000 M-1 cm-1), high quantum yields (>80%), and slow rates of nonradiative decay. Absorption by the aromatic substituents results in a "cascatelle" process leading to emission exclusively through the boradiazaindacene entity and thus large virtual Stokes' shift (>10,000 cm-1). The new compounds are also redox active, with the formation of both Bodipy+* and Bodipy-* occurring more readily than for F-Bodipy species. The molecules in their excited states are strong reducing agents.     

A New Carborane Cage: Hexacarba-arachno-dodecaborane(12)

A drum-shaped cage built up from six carbon and six boron atoms is proposed for the structure of 2 based on the comparison of experimental and calculated NMR chemical shifts. The novel arachno carborane 2 was obtained upon treatment of bis(diethylboryl)ethyne ( 1 ) with an excess of tetraethyldiborane(6) [Eq. (a)].     

A novel approach to the synthesis of amino acids based on cobalt bis(dicarbollide)

A novel approach to the synthesis of boron-containing amino acids based on ring opening of cyclic oxonium derivatives of polyhedral boron hydrides under the action of the terminal functional groups of natural amino acids was proposed. This approach was successfully implemented for the synthesis of cobalt bis(dicarbollide) — tyrosine conjugate.     

Nano-Impact Electrochemistry Reveals Kinetics Information of Metal-Ion Battery Materials with Multiple Redox Centers

Prussian blue (PB) has emerged as a promising cathode material in aqueous batteries. It possesses two distinct redox centers, and the potassium ions (K⁺) are unevenly distributed throughout the compound, adding complexity to the interpretation of the K⁺ insertion/de-insertion kinetic mechanism. Traditional ensemble-averaged measurements are limited in uncovering the precise kinetic information of the PB particles, as the results are influenced by the construction of the porous composite electrode and the redox behavior from different particles. In this study, the electrochemical processes of individual PB particles were investigated using nano-impact electrochemistry. By varying the potentials, different types of transient current signals were obtained that revealed the kinetic mechanism of each oxidation/reduction reaction in combination with theoretical simulation. Additionally, a partially contradictory conclusion between single-particle analysis and the ensemble-averaged measurement was discussed. These findings contribute to a better understanding of the electrochemical processes of cathode materials with multiple redox centers, which facilitates the development of effective strategies to optimize these materials.     

Facile Access to Substituted 1,4-Diaza-2,3-Diborinines

Several bis(dimethylamino)-substituted 1,4-diaza-2,3-diborinines (DADBs) were synthesized with variable substituents at the backbone nitrogen atoms. By reaction with HCl or BX₃ (X=Br, I), these species were successfully converted into their synthetically more useful halide congeners. The high versatility of the generated B−X bonds in further functionalization reactions at the boron centers was demonstrated by means of salt elimination (MeLi) and commutation (NMe₂ DADBs) reactions, thus making the DADB system a general structural motif in diborane(4) chemistry. A total of 18 DADB derivatives were characterized in the solid state by X-ray diffraction, revealing a strong dependence of the heterocyclic bonding parameters from the exocyclic substitution pattern at boron. According to our experiments towards the realization of a Dipp-substituted, sterically encumbered DADB, the mechanism of DADB formation proceeds via a transient four-membered azadiboretidine intermediate that subsequently undergoes ring expansion to afford the six-membered DADB heterocycle.     

Theoretical study of nonlinear optical properties of cobalt bis (dicarbollide) derivatives: the effect of substituents

In the present work, molecular first-order hyperpolarizability (\(\beta _{\mathrm{tot}}\)) and dipole moment (d) are obtained at B3LYP/6–31G(d,p) level of theory by coupled perturbed Hartree–Fock method within the static approach. The investigated molecules are a series of substituted cobalt bis (dicarbollide) derivatives: Hydrogens bonded to the two carbon atoms are replaced by acceptor and donor electron substituents. Correlations between the Hammett electronic parameters of the substituents and the molecular properties are tested. Among them, the named push–pull compounds produced the largest calculated values of \(\beta _{\mathrm{tot}}\) and d. The UV–Vis spectra are reported for all studied compounds.     

Single-electron oxidation and nucleophilicity of aminomethylated calix[4]resorcinarenes

The electrochemical oxidation of a number of aminomethylated calix[4]resorcinarenes (AMC) with different substituents at the nitrogen atom and the kinetics of nucleophilic substitution reactions of these compounds with p-nitrophenyl bis(chloromethyl)phosphinate were studied. The reactivity of the ionic associates of AMC in the nucleophilic substitution and the behavior of AMC in electrooxidation are determined by the same factors, namely, the amino-group basicity and the nature of the substituents at the nitrogen atom. These factors influence the ratio of the zwitter-ionic and anionic forms of AMC.     

Hyperpolarizability of 6-vertex carboranes quantum chemical study

Structure and molecular first hyperpolarizability (β) of nitro-amino-substituted 6-vertex 1,6-carboranes are investigated by means of DFT calculations. The results obtained have revealed that the relative orientation of substituents with respect to the carborane cage influences bond lengths distribution in the cage, which leads to significant changes in the values of hyperpolarizabilities. Calculations with different basis sets have demonstrated that the value of β is not significantly affected by the choice of basis set. The calculated data shows that hyperpolarizability of carborane molecules substituted for carbon atoms is lower than when substituted for boron atoms. For latter molecule, the value of β is of the same order as that of para-nitroaniline molecule.     

Optical spectra of anionic boron cluster compounds and their utilization for photometric detection

The article presents first collection of UV-vis absorption spectra of purely synthetic boron cluster compounds. Single-cage compounds have at least 11 cluster atoms; cobaltadicarboranes consists of 2 substituted 11-vertex bis(dicarbollide) clusters sandwiching the central cobalt atom. Spectrum of any of 18 investigated compounds has absorption maximum between 200 and 210 nm; its molar extinction coefficient is of the order of 10(3)-10(4)L/molcm. Second maximum exists in a spectrum of a single-cage compound if its exo-skeletal substituent absorbs UV-light above 200 nm. Spectra of cobaltadicarbaboranes both bridged and unbridged have pronounced second maxima between 270 and 300 nm. Their molar extinction coefficients range from 10(4) to 10(5)L/molcm. First light absorption minimum is close to 254 nm in spectra with two and more absorption maxima. Several correlations are derived between structure of investigated compounds and their UV-vis absorption spectra.     

How molecular electrochemistry may shine light by designing electrofluorochromic compounds

Luminescence and electrochemistry have been intimately associated for a long time in the framework of electrochemiluminescence, where the electrochemical signal triggers light emission through a redox reaction. More recently another aspect of this coupling has been developed in electrofluorochromism, where electrochemistry is used to monitor photoluminescence processes. This review aims to highlight some molecular structures allowing emission properties to be tuned electrochemically through either redox-active luminophores or dyads in which a redox moiety can (de)activate the luminescence of a nearby unit. The working principle and main applications are also briefly discussed.     

Electrochemical behavior of complex based on ruthenium(II) phthalocyaninate

The electrochemical reactions of ruthenium(II) bis(triethylenediamine)tetra-tret-butyl-phthalocyaninate in dimethylformamide are studied. Two reversible redox reactions on the platinum amalgam electrode are revealed at the potentials of ?0.73 and ?1.16 V (Ag/AgCl). Similarly to several other phthalocyanines, these redox reactions correspond to the successive transfer of two electrons to phthalocyanine ring. A new phenomenon, which has not been reported in the literature for phthalocyanines, namely, the cathodic polymerization, is discovered. Thus formed polymer is redox-active, and only one cathodic reaction at the potentials from ?0.78 to ?0.84 V (a shift in the cathodic direction takes place as the film thickness increases) is observed in the polymer. In addition, the polymer exhibits also considerable electron conductivity that enables one to perform various electrochemical reactions in a wide potential range on the electrode modified with the polymer.