Synthesis and luminescent properties of polymer-silica multilayer-encapsulated perovskite quantum dots for optoelectronics

Hydrophobic all-inorganic perovskite quantum dots (IPQDs) CsPbX₃ (X = Cl, Br, and I) were synthesized using conventional solution methods. IPQDs are potential materials for lasers, solar cells, and displays because of their narrow full width at half-maximum, optically tunable wavelength, and great photoluminescence quantum yield. Their shortcomings are structurally unstable and moisture sensitive. To overcome the poor stability, we have developed a chemical modification to form GQD + PMAO@SiO₂ that enhances their photoluminescence quantum yield (from 60 to ~90%), thermal stability (from 60 to ~90°C), and photochemical stability. The combination of the green-emitting GQD + PMAO@SiO₂ and red-emitting RQD + PMAO with a 450 nm blue InGaN-based LED chip was used to fabricate a white light emitting diode with the correlated color temperature (CCT) value of 6,943 K and Commission Internationale del'Eclairage of (0.312, 0.290).     

Anticancer Photodynamic Therapy Properties of Sulfur‐Doped Graphene Quantum Dot and Methylene Blue Preparations in MCF‐7 Breast Cancer Cell Culture

Photodynamic therapy (PDT) is a field with many applications including chemotherapy. Graphene quantum dots (GQDs) exhibit a variety of unique properties and can be used in PDT to generate singlet oxygen that destroys pathogenic bacteria and cancer cells. The PDT agent, methylene blue (MB), like GQDs, has been successfully exploited to destroy bacteria and cancer cells by increasing reactive oxygen species generation. Recently, combinations of GQDs and MB have been shown to destroy pathogenic bacteria via increased singlet oxygen generation. Here, we performed a spectrophotometric assay to detect and measure the uptake of GQDs, MB and several GQD‐MB combinations in MCF‐7 breast cancer cells. Then, we used a cell counting method to evaluate the cytotoxicity of GQDs, MB and a 1:1 GQD:MB preparation. Singlet oxygen generation in cells was then detected and measured using singlet oxygen sensor green. The dye, H₂DCFDA, was used to measure reactive oxygen species production. We found that GQD and MB uptake into MCF‐7 cells occurred, but that MB, followed by 1:1 GQD:MB, caused superior cytotoxicity and singlet oxygen and reactive oxygen species generation. Our results suggest that methylene blue's effect against MCF‐7 cells is not potentiated by GQDs, either in light or dark conditions.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Enhanced wavelength-sensitivity of volume holographic grating with dual-photoinitiation system in polymer-dispersed liquid crystal

We propose a method to improve the wavelength-sensitivity of a volume holographic grating by mixing dual-photoinitiation dopants, namely, rose bengal (RB)/N-phenylglycine (NPG) system and methylene blue (MB)/p-toluenesulfonic acid (PTSA) system, which enable the fabrication of gratings upon both green and red light illumination. The RB/NPG green light photoinitiation system is chosen in combination with the red-active MB/PTSA system because RB and MB absorb light near 567 and 665 nm independently. In this case, the holographic gratings, recorded in polymer-dispersed liquid crystal, can be fabricated simultaneously by two different visible laser lights with an output wavelength of 532 and 632.8 nm. The electro-optical performances of the gratings exposed upon 532 and 632.8 nm have been implemented: the diffraction efficiencies (DE) are 75% and 57% respectively when the exposure time is optimised to 2 min and 17 min; the threshold voltage is approximately 2.9 V/μm. The enhanced wavelength-sensitivity of holographic gratings allows for the storage of three-dimensional (3D) images on the same hologram plate, and these 3D images are easily reconstructed by both red and green light.     

Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+): a potential single-phased white-light-emitting phosphor suitable for white-light-emitting diodes

A novel white-light-emitting phosphor Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+) has been prepared by solid-state reaction. The photoluminescence properties indicate that there is an efficient energy transfer from the Eu(2+) to Mn(2+) ions via a dipole-quadrupole reaction. The obtained phosphor exhibits a strong excitation band between 250 and 430 nm, matching well with the dominant emission band of a UV light-emitting-diode (LED) chip. Upon excitation of UV light, white light is realized by combining a broad blue-green emission band at 480 nm and a red emission band at 645 nm attributed to the Eu(2+) and Mn(2+) ions. The energy-transfer efficiency and critical distance were also calculated. Furthermore, the phosphors can generate lights from blue-green through white and eventually to red by properly tuning the relative ratio of the Eu(2+) to Mn(2+) ions through the principle of energy transfer. Preliminary studies showed that the phosphor might be promising as a single-phased white-light-emitting phosphor for a UV white-light LED.     

Photodynamic Inactivation of <Emphasis Type="BoldItalic">E. coli</Emphasis> PTCC 1276 Using Light Emitting Diodes: Application of Rose Bengal and Methylene Blue as Two Simple Models

The lack of a comparative study about potential of high-power light emitting diodes (LEDs) for photodynamic inactivation (PDI) of pathogenic microorganisms has remained as a challenging issue for researchers. Therefore, the aim of this study is to fill this gap through introduction of an efficient model for in vitro PDI in an aqueous medium. For this purpose, two individual 30 mW/cm² irradiation systems were designed using suitable sets of green and red LEDs. At another work, Methylene blue (MB) and Rose bengal (RB) as two simple models in the range of 5–150 μM were used in order to compare PDI of E. coli PTCC 1276 using red and green LED systems. Our results showed that a first-order mathematical model has the strength to describe the temporal variation of survival curves. Based on our results, when concentration of photosensitizer increased, the rate of inactivation for RB increased while MB depicted a maximum rate value at 25 μM. In a comparative study, optimum inactivation of E. coli PTCC 1276 obtained during 2- and 10-min irradiation of the LED systems using RB and MB at 150 and 25 μM, respectively. With regard to lower value of inactivation time and higher rate of inactivation for RB, use of simultaneous green high-power LEDs and RB is proposed as an efficient approach for PDI of pathogenic bacteria in future industrial applications.     

The influence of wavelength of light on cyanobacterial asymmetric reduction of ketone

Asymmetric reduction of ketone by a microalga, Synechocystis sp. PCC 6803, smoothly afforded to the corresponding (S)-alcohol in excellent enantiomeric excess by the aid of illumination of orange and red LED lights which are more effective than other LEDs such as blue and green lights. The condition under minimum energy flux (1.0 W/m²) of orange-red LEDs is enough for the reduction of ketone, and it seems that orange-red light rather effectively forwarded the regeneration of coenzyme.     

A flow cytometric assay technology based on quantum dots-encoded beads

A flow cytometric detecting technology based on quantum dots (QDs)-encoded beads has been described. Using this technology, several QDs-encoded beads with different code were identified effectively, and the target molecule (DNA sequence) in solution was also detected accurately by coupling to its complementary sequence probed on QDs-encoded beads through DNA hybridization assay. The resolution of this technology for encoded beads is resulted from two longer wavelength fluorescence identification signals (yellow and red fluorescent signals of QDs), and the third shorter wavelength fluorescence signal (green reporting signal of fluorescein isothiocyanate (FITC)) for the determination of reaction between probe and target. In experiment, because of QDs’ unique optical character, only one excitation light source was needed to excite the QDs and probe dye FITC synchronously comparing with other flow cytometric assay technology. The results show that this technology has present excellent repeatability and good accuracy. It will become a promising multiple assay platform in various application fields after further improvement.     

Effects of Light‐emitting Diode Radiations on Human Retinal Pigment Epithelial Cells In Vitro

Human visual system is exposed to high levels of natural and artificial lights of different spectra and intensities along lifetime. Light‐emitting diodes (LEDs) are the basic lighting components in screens of PCs, phones and TV sets; hence it is so important to know the implications of LED radiations on the human visual system. The aim of this study was to investigate the effect of LEDs radiations on human retinal pigment epithelial cells (HRPEpiC). They were exposed to three light–darkness (12 h/12 h) cycles, using blue‐468 nm, green‐525 nm, red‐616 nm and white light. Cellular viability of HRPEpiC was evaluated by labeling all nuclei with DAPI; Production of reactive oxygen species (ROS) was determined by H2DCFDA staining; mitochondrial membrane potential was quantified by TMRM staining; DNA damage was determined by H2AX histone activation, and apoptosis was evaluated by caspases‐3,‐7 activation. It is shown that LED radiations decrease 75–99% cellular viability, and increase 66–89% cellular apoptosis. They also increase ROS production and DNA damage. Fluorescence intensity of apoptosis was 3.7% in nonirradiated cells and 88.8%, 86.1%, 83.9% and 65.5% in cells exposed to white, blue, green or red light, respectively. This study indicates three light–darkness (12 h/12 h) cycles of exposure to LED lighting affect in vitro HRPEpiC.     

Ultrasmall near-infrared Ag2Se quantum dots with tunable fluorescence for in vivo imaging

A strategy is presented that involes coupling Na(2)SeO(3) reduction with the binding of silver ions and alanine in a quasi-biosystem to obtain ultrasmall, near-infrared Ag(2)Se quantum dots (QDs) with tunable fluorescence at 90 °C in aqueous solution. This strategy avoids high temperatures, high pressures, and organic solvents so that water-dispersible sub-3 nm Ag(2)Se QDs can be directly obtained. The photoluminescence of the Ag(2)Se QDs was size-dependent over a wavelength range from 700 to 820 nm, corresponding to sizes from 1.5 ± 0.4 to 2.4 ± 0.5 nm, with good monodispersity. The Ag(2)Se QDs are less cytotoxic than other nanomaterials used for similar applications. Furthermore, the NIR fluorescence of the Ag(2)Se QDs could penetrate through the abdominal cavity of a living nude mouse and could be detected on its back side, demonstrating the potential applications of these less toxic NIR Ag(2)Se QDs in bioimaging.     

LED Phototherapy with Gelatin Sponge Promotes Wound Healing in Mice

Tiny but highly efficient, a light‐emitting diode (LED ) can power a therapy device, such as a phototherapy device, and, at the same time, decrease the device's size requirements. In this study, a LED phototherapy device was designed to investigate the possible impact on wound healing using a mouse model and a cell line exposed to red and blue light. To enhance wound phototherapy, a gelatin sponge was fabricated. Results showed that the red and blue lights promoted cell growth and wound healing, while the blue light with a gelatin sponge protected the wound from infection in the early stages of wound healing. The LED phototherapy device combined with the gelatin sponge, therefore, has potential significance in clinical application for wound healing.     

DNA detection based on Mn-doped ZnS quantum dots/methylene blue nanohybrids

Nanohybrids were formed from 3-mercaptopropionic acid(MPA)-coated Mn-doped ZnS quantum dots(QDs) and methylene blue(MB) via electrostatic interaction, and then used in the detection of trace DNA.The principle of detection is as follows: MB binds with Mn-doped ZnS QDs via electrostatic interaction,and then quenches the room temperature phosphorescence(RTP) of the QDs through photoinduced electron-transfer(PIET). After the addition of DNA, MB binds with DNA through intercalation and electrostatic interaction, and desorbs from the surfaces of Mn-doped ZnS QDs, which recovers the RTP of the QDs. On this basis, a DNA detection method based on the properties of RTP was set up. This method shows a detection range of 0.2–20 mg/L, and a detection limit of 0.113 mg/L. Since this method is based on the RTP of QDs, it is not interfered by the background fluorescence or scattering light in vivo, and thus,avoids complex sample pretreatment. Thus, this method is very feasible for detection of trace DNA in biofluids.     

Understanding the Electronic Structures of Graphene Quantum Dot Physisorption and Chemisorption onto the TiO2 (110) Surface: A First‐Principles Calculation

We investigated the interfacial electronic structure and charge transfer properties of graphene quantum dot (GQD) physisorption and chemisorption on the TiO₂ (110) surface from density functional theory calculations. The simulations show that a slight charge transfer occurs in physisorption case while a significant charge transfer takes place in chemisorption configuration. We present a detailed comparison of the similarities and differences between the electronic structures. The similarities originate from the positive work function difference in both the physisorption and chemisorption configurations, which is able to drive electron transfer from GQD into TiO₂, leading to charge separation across the GQD–TiO₂ interface. The differences stem from the interaction between the GQD and TiO₂ substrate. For example, GQD bounds to TiO₂ surface through van der Waals interactions in the case of physisorption. In the chemisorption configuration, however, there exists strong covalent bonding between them. This leads to much more efficient charge separation for chemisorption than for physisorption. Furthermore, the GQD–TiO₂ composites show large band‐gap narrowing that could extend the optical absorption edge into the visible‐light region. This should imply that chemisorbed GQDs produce a composite with better photocatalytic and photovoltaic performance than composites formed through physisorption.     

Reversible Phase Transfer of Luminescent ZnO Quantum Dots between Polar and Nonpolar Media

A facile and reversible phase‐transfer protocol for luminescent ZnO quantum dots (QDs) between methanol and hexane is presented. Oleylamine together with acetic acid trigger this reversible phase‐transfer process, during which the structure and optical properties of the ZnO QDs are well‐protected. ZnO QDs with a diameter of approximately 5 nm emit yellow light at 525 nm, while those with a diameter of approximately 4 nm emit green light at 510 nm. The positions of the emission peaks remain unchanged during the presented phase‐transfer process. The Pearson’s hard and soft (Lewis) acid and base principle, together with the principle that similar substances are more likely to be dissolved by each other, describes the current reversible phase‐transfer process. Herein, we circumvent the time‐consuming work required to synthesize ZnO QDs in different environments, making it possible to combine the advantages of ZnO QDs dispersed in polar and nonpolar solvents.     

发红色荧光的类水滑石材料的制备及在LED中的应用

通过共沉淀法合成了发红色荧光的类水滑石材料,采用硅烷偶联剂对其进行了表面改性,并利用荧光光谱、红外光谱、X射线衍射(XRD)和扫描电子显微镜(SEM)等对其结构和性能进行了表征,探讨了表面改性对荧光类水滑石的影响.将改性荧光类水滑石与发射波长为384 nm的In Ga N芯片组合制成发光二极管,器件发出明亮的红光.研究结果表明,改性的发红色荧光的类水滑石是制作白光二极管可供选用的红色发光材料.     

Escherichia coli: Dominance of Red Light over Other Visible Light Sources in Establishing Viable but Nonculturable State

In this study, the effect of UV-A and different wavelengths of visible light irradiations combined with or without a photosensitizer (methylene blue, MB) on the establishment of viable but nonculturable (VBNC) state in Escherichia coli was investigated. Survival of the E. coli was investigated by measuring plate counts, respiring cell count (RCC), direct viable count (DVC) and total counts over a period of up to 72 h. The inhibition rates of various light sources in the presence or absence of MB on E. coli in seawater were ranked in the order UV-A>red light>white light>blue light>green light (from greatest to least activation). E. coli survived for 10.2, 19.0, 21.3 and 24.04 h under exposure to red, white, blue and green light and for 6.8 h under exposure to UV-A in the presence of MB according to t ₉₉ . Although the VC declined to undetectable levels in a relatively short time, the RCC showed that some cells were still capable of respiration and, therefore, are assumed to have entered the VBNC phase. This is the first time that red light has been shown to have a stronger effect on E. coli survival and VBNC than white, green and blue light in seawater environment.     

Mesoporous Silica Particles Integrated with All‐Inorganic CsPbBr3 Perovskite Quantum‐Dot Nanocomposites (MP‐PQDs) with High Stability and Wide Color Gamut Used for Backlight Display

All‐inorganic CsPbX₃ (X=I, Br, Cl) perovskite quantum dots (PQDs) have been investigated because of their optical properties, such as tunable wavelength, narrow band, and high quantum efficiency. These features have been used in light emitting diode (LED) devices. LED on‐chip fabrication uses mixed green and red quantum dots with silicone gel. However, the ion‐exchange effect widens the narrow emission spectrum. Quantum dots cannot be mixed because of anion exchange. We address this issue with a mesoporous PQD nanocomposite that can prevent ion exchange and increase stability. We mixed green quantum‐dot‐containing mesoporous silica nanocomposites with red PQDs, which can prevent the anion‐exchange effect and increase thermal and photo stability. We applied the new PQD‐based LEDs for backlight displays. We also used PQDs in an on‐chip LED device. Our white LED device for backlight display passed through a color filter with an NTSC value of 113 % and Rec. 2020 of 85 %.     

The Application of CdSe Quantum Dots with Multicolor Emission as Fluorescent Probes for Cell Labeling

Herein, highly luminescent CdSe quantum dots (QDs) with emissions from the blue to the red region of visible light were synthesized by using a simple method. The emission range of the CdSe QDs could be tuned from λ=503 to 606 nm by controlling the size of the CdSe QDs. Two amino acids, L ‐tryptophan (L ‐Trp) and L ‐arginine (L ‐Arg), were used as coating agents. The quantum yield (QY) of CdSe QDs (green color) with an optimized thickness could reach up to 52 %. The structures and compositions of QDs were examined by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Optical properties were studied by using UV/Vis and photoluminescence (PL) spectroscopy and a comparison was made between uncoated and coated CdSe QDs. The amino acid‐modified β‐cyclodextrin (CD)‐coated CdSe QDs presented lower cytotoxicity to cells for 48 h. Furthermore, amino acid‐modified β‐CD‐coated green CdSe QDs in HepG2 cells were assessed by using confocal laser scanning fluorescence microscopy. The results showed that amino acid‐modified β‐CD‐coated green CdSe QDs could enter tumor cells efficiently and indicated that biomolecule‐coated QDs could be used as a potential fluorescent probe.     

Bandgap engineering of tetragonal phase CuFeS2 quantum dots via mixed-valence single-atomic Ag decoration for synergistic Cr(VI) reduction and RhB degradation

Bandgap engineering through single-atom site binding on semiconducting photocatalyst can boost the intrinsic activity, selectivity, carrier separation, and electron transport. Here, we report a mixed-valence Ag(0) and Ag(I) single atoms co-decorated semiconducting chalcopyrite quantum dots (Ag/CuFeS₂ QDs) photocatalyst. It demonstrates efficient photocatalytic performances for specific organic dye (rhodamine B, denoted as RhB) as well as inorganic dye (Cr(VI)) removal in water under natural sunlight irradiation. The RhB degradation and Cr(VI) removal efficiencies by Ag/CuFeS₂ QDs were 3.55 and 6.75 times higher than those of the naked CuFeS₂ QDs at their optimal pH conditions, respectively. Besides, in a mixture of RhB and Cr(VI) solution under neutral condition, the removal ratio has been elevated from 30.2% to 79.4% for Cr(VI), and from 95.2% to 97.3% for RhB degradation by using Ag/CuFeS₂ QDs after 2 h sunlight illumination. The intrinsic mechanism for the photocatalytic performance improvement is attributed to the narrow bandgap of the single-atomic Ag(I) anchored CuFeS₂ QDs, which engineers the electronic structure as well as expands the optical light response range. Significantly, the highly active Ag(0)/CuFeS₂ and Ag(I)/CuFeS₂ effectively improve the separation efficiency of the carriers, thus enhancing the photocatalytic performances. This work presents a highly efficient single atom/QDs photocatalyst, constructed through bandgap engineering via mixed-valence single noble metal atoms binding on semiconducting QDs. It paves the way for developing high-efficiency single-atom photocatalysts for complex pollutions removal in dyeing wastewater environment.     

Effect of light quality on the accumulation of photosynthetic pigments, proteins and mycosporine-like amino acids in the red alga Porphyra leucosticta (Bangiales, Rhodophyta)

The effect of different light qualities (white, blue, green, yellow and red light) on photosynthesis, measured as chlorophyll fluorescence, and the accumulation of photosynthetic pigments, proteins and the UV-absorbing mycosporine-like amino acids (MAAs) was studied in the red alga Porphyra leucosticta. Blue light promoted the highest accumulation of nitrogen metabolism derived compounds i.e., MAAs, phycoerythrin and proteins in previously N-starved algae after seven days culture in ammonium enriched medium. Similar results were observed in the culture under white light. In contrast, the lowest photosynthetic capacity i.e., lowest electron transport rate and lowest photosynthetic efficiency as well as the growth rate were found under blue light, while higher values were found in red and white lights. Blue light favored the accumulation of the MAAs porphyra-334, palythine and asterina-330 in P. leucosticta. However, white, green, yellow and red lights favored the accumulation of shinorine. The increase of porphyra-334, palythine and asterina-330 occurred in blue light simultaneous to a decrease in shinorine. The accumulation of MAAs and other nitrogenous compounds in P. leucosticta under blue light could not be attributed to photosynthesis and the action of a non-photosynthetic blue light photoreceptor is suggested. A non-photosynthetic photoreceptor could be also involved in the MAAs interconversion pathways in P. leucosticta.