Surface activity—thermodynamic properties and light scattering studies for some novel aliphatic polyester surfactants

The preparation of 12 new polyester surfactants based on aliphatic amines and different ethylene oxide content is described. These surfactants were characterized by determining their molecular weights and polydispersity by gel permeation chromatography (GPC) and nitrogen content. Drop volume tensiometry (DVT) was used to measure the surface tension at 25, 35, 45 and 55°C. The surface tension isotherms were used to determine critical micelle concentration (CMC), maximum Gibb's adsorption (Γ_max), minimum area per molecule (A_min), the effectiveness of surface tension reduction (π_cmc) and the efficiency (pC₂₀). The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) were calculated and the data showed that these surfactants favor micellization to adsorption. The static scattered light intensity measurements provide the calculation of the molecular weight of micelle and the aggregation number (N°), while the dynamic light scattering provide the hydrodynamic radius of micelle (R_H) and the diffusion coefficient at different surfactant concentrations. The hydrodynamic radius of micelle (R_H) at different surfactant concentrations could be used also to determine the CMC giving results that are comparable to those obtained by surface tension measurements. All the data are discussed regarding the chemical structure of the polymeric surfactants. Copyright © 2004 John Wiley & Sons, Ltd.     

Factors influencing the mechanism of surfactant catalyzed reaction of vitamin C-ferric chloride hexahydrate system

The kinetics of vitamin C by ferric chloride hexahydrate has been investigated in the aqueous ethanol solution of basic surfactant viz. octadecylamine (ODA) under pseudo-first order conditions. The critical micelle concentration (CMC) of surfactant was determined by surface tension measurement. The effect of pH (2.5–4.5) and temperature (15–35°C) in the presence and absence of surfactant were investigated. Activation parameters, ΔE _a, ΔH ^#, ΔS ^#, ΔG ^≠, for the reaction were calculated by using Arrhenius and Eyring plot. Surface excess concentration (Γ_max), minimum area per surfactant molecule (A _min), average area occupied by each molecule of surfactant (a), surface pressure at the CMC (Π_max), Gibb’s energy of micellization (ΔG _M°), Gibb’s energy of adsorption (ΔG _ad°), were calculated. It was found that the reaction in the presence of surfactant showed faster oxidation rate than the aqueous ethanol solution. Reaction mechanism has been deduced in the presence and absence of surfactant.     

Surface activity and thermodynamic properties of water‐soluble polyester surfactants based on 1,3‐dicarboxymethoxybenzene used for enhanced oil recovery

The surface activity and thermodynamic properties for eight low molecular weight nonionic co‐polyester (PE) surfactants have been investigated. Surface and interfacial tensions (IFT) of surfactants in aqueous solutions were measured using the spinning drop technique. From these measurements, the critical micelle concentration (CMC), the surface pressure at CMC (Y_CMC), the maximum surface concentration (Γ_max), the minimum area/molecule at the aqueous solution/air interface (A_min), the effectiveness of surface tension reduction (Π_CMC), the alkane carbon number (n_min) and the IFT at n_min (Y_min) were determined. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic and ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad and ΔS_ad) for these polymeric surfactants were also calculated. Structural effects on micellization and adsorption are discussed in terms of these parameters. The results show that the ΔG_ad values were more negative than ΔG_mic values for these compounds, so that they favored adsorption before the micellization process. They exhibited IFT in the order of 10⁻³ to 10⁻⁴ mN/m against the thin alkane carbon number range 6–9. This range seemed to be prefered for enhanced oil recovery. Copyright © 2000 John Wiley & Sons, Ltd.     

Role played by the head size of some non‐ionic surfactants on their adsorption onto montmorillonite clay

Sorption behavior of polyoxethylene(n)monooleate series [Ol(EO)_n] onto montmorillonite clay was studied at 25°C to investigate the influence of the surfactant's head size on the sorption process. All the tested surfactants exhibited L‐shaped isotherms that means a strong interaction between the adsorbent and the adsorbate. Also, all the obtained isotherms ended with a drastic increase in the isotherm slope at nearly constant equilibrium concentration. This abrupt increase reflected the fairly high affinity of the tested surfactants to the clay surface at high bulk concentration region. The maximum amount adsorbed at the plateau region, Γ_max, was calculated according to the Langmuir adsorption theory and followed the order: Ol(EO)₁₄ > Ol(EO)₂₀ < Ol(EO)₄₀ < Ol(EO)₈₀. In case of short ethylene oxide (EO) chain, Γ_max decreased with the increase in the chain length; but a reverse result was obtained in case of surfactants with longer EO chain length (20 to 80 units). The free energy of adsorption, ΔG°_ad, had negative values indicating the spontaneous adsorption of surfactant molecules onto clay. The values of ΔG°_ad increased with increasing EO units from 14 to 20 units and decreased with further elongation in the EO chain from 20 to 80 units. Copyright © 2004 John Wiley & Sons, Ltd.     

Kinetics and mechanism of diels-alder additions of tetracyanoethylene to anthracene derivatives—I : Substituent effects

The rates of addition of tetracyanoethylene to a number of 9- and 9,10-substituted anthracenes have been measured spectrophotometrically in solvent CCl₄. Substituent effects correlated well using the extended form of the Hammett equation. The importance of steric effects on the reaction was assessed by a systematic variation of the components of the data used in the above correlation.Activation parameters (ΔG_exp^≠, etc.) and the corresponding overall thermodynamic parameters for adduct formation (ΔG_ad°, etc.) were evaluated. ΔG_exp^≠ was found to be linearly related to ΔG_c°, the free energy of formation of the intermediate complex which confirms the role of the latter as a true reaction intermediate. From correlations between ΔG_exp^≠ and ΔG_ad°, an “early” transition state is suggested. The above thermodynamic and activation data enable detailed reaction profiles to be drawn.     

Synthesis of Some Novel Nonionic Ethoxylated Surfactants Based on α-Amino Acids and Investigation of Their Surface Active Properties

Eight novel ethoxylated nonionic surfactants were prepared based on oil soluble α-amino acids. The L-phenylalanine and L-leucine were esterified and amidated with cetyl alcohol and palamitic acid, respectively; two amides and two esters of α-amino acids were obtained. The ethylene oxide was condensed with the prepared amides and esters to get three different polyethylene oxide units (40, 60, and 100) as phenylalanine derivatives. The amide and ester of α-L-leucine were ethoxylated at (60 ethylene oxides units). The analytical micro analysise, FTIR, ¹H NMR, ¹³C NMR, mass spectra were carried out to confirm the chemical structures. The surface tension of the water soluble prepared compounds was measured at 25°C, further the surface active properties were determined and calculated. Such that critical micelle concentration (CMC), surface excess (Γ_max); area per molecule (A_min), effectiveness (γ_CMC) free energy of micellization and adsorption (ΔG_mic, ΔG_ad). From the data obtained it was found that the CMC of phenylalanine esters is greater than that obtained for the amide derivatives. The Γ_max decreased as the ethylene oxide units (EO) increased. It was found also that the ΔG_ad was greater than the ΔG_mic. The obtained data and discrepancy were discussed on the light of surfactant chemical structure.     

Operational comparison of various thermodynamic treatments of organic substance adsorption at the electrode/solution interface

Three isotherms are considered: Frumkin's Bennes' and Mohilner's. The relationship between the interaction parameters in the first two and the adsorbate activity coefficient in the last is discussed. The significance of various standard states for the definition of ΔG° _ads is analysed. The operational derivation of ΔG°_ads in the three cases and the relationship between the resulting three quantities are illustrated. The isotherms have been used to describe the adsorption of 1,4-dioxane on a polarized Hg electrode. The analysis has been carried out both at constant potential and constant charge. The picture emerging in each of the three cases is discussed in the light of the results obtained in the other two. It is concluded that the three approaches give the same qualitative information about the interfacial behaviour of dioxane, especially as far as the effect of the electric field and the particle-particle lateral interaction are concerned. The usefulness of the Frumkin isotherm for analysing promptly experimental adsorption data is thus maintained. Limitations of the present approach are discussed.     

Thermodynamic studies of hydrogen iodide in dioxane-water mixtures from electromotive force measurements

The standard potentials of the silver-silver iodide electrode were measured in 10,20,30 and 40% (w/w) dioxane-water mixtures at 15,25,35 and 45°C. These values have been used to determine the thermodynamic quantities ΔG_t°, ΔS_t°, ΔH_t° for the transfer of H⁺I^? from water to various dioxane-water mixtures. The ionic ΔG_t° values for H⁺, Cl^?, Br^? and I^? are determined using Feakins method. The chemical and electrical contributions of ΔG_t° are also calculated using the method proposed by Roy and co-workers. The significance of these thermodynamic functions is discussed in relation to the acid—base character of the solvents.     

Synthesis, characterization, and application of titanate nanotubes for Th(IV) adsorption

Titanate nanotubes (TNTs) have been synthesized by a hydrothermal method using rutile TiO₂ powder as titanium source. The determination of the structure and morphology was characterized by XRD, FTIR, SEM and TEM. The results indicate that the TNTs successfully synthesized under hydrothermal conditions of 150 °C. The adsorption of Th(IV) on TNTs was studied as a function of contact time, pH values, ionic strength, initial Th(IV) concentration and temperature under ambient conditions by using batch technique. The results indicate that adsorption of Th(IV) on TNTs is strongly dependent on pH values, but weakly dependent on ionic strength; Adsorption kinetics was better described by the pseudo-second-order model. The adsorption isotherms are simulated by Langmuir and Freundlich models well. ΔG°, ΔH° and ΔS° free energy were calculated from experimental data, The results indicate that the adsorption of Th(IV) on TNTs is an endothermic and a spontaneous process, and increases with increasing temperature. The adsorption of Th(IV) on TNTs is mainly dominated by chemical sorption or surface complexation.     

Thermodynamic studies of Ni(II) adsorption onto bentonite from aqueous solution

The adsorption behavior of Ni(II) onto bentonite was studied as a function of temperature under optimized conditions of shaking time, amount of adsorbent, pH, and concentration of the adsorbate. Thermodynamic parameters such as ΔH^°, ΔS^°, and ΔG^° were calculated from the slope and intercept of the linear plot of lgK_D against 1/T. Analysis of adsorption results obtained at T=(298, 303, 313, and 323) K showed that the adsorption pattern on bentonite followed the Langmuir, Freundlich, and D-R isotherms. A flame atomic absorption spectrophotometer was used for measuring the concentration of Ni(II).     

Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota

In present study adsorption capacity of waste materials of Daucus carota plant (carrot stem powder: CSP and carrot leaves powder: CLP) was explored for the removal of methylene blue (MB) malachite green (MG) dye from water. The morphology and functional groups present were investigated by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The operating variables studied were pH, adsorbent dose, ionic strength, initial dye concentration, contact time and temperature. Equilibrium data were analysed using Langmuir and Freundlich isotherm models and monolayer adsorption capacity of adsorbents were calculated. Kinetic data were studied using pseudo-first and pseudo-second order kinetic models and the mechanism of adsorption was described by intraparticle diffusion model.Various thermodynamic parameters such as enthalpy of adsorption ΔH°, free energy change ΔG° and entropy ΔS° were estimated. Negative value of ΔH° and negative values of ΔG° showed that the adsorption process was exothermic and spontaneous. Negative value of entropy ΔS° showed the decreased randomness at the solid–liquid interface during the adsorption of MB and MG onto CSP and CLP.     

Synthesis of a MnO2/multiwalled carbon nanotube nanocomposite and its application as a sorbent for removing Cu2+ ions from aqueous media

In this research, a manganese dioxide/multiwalled carbon nanotube (MnO₂/MWCNT) was firstly synthesized and characterized and then was applied as an effective sorbent for removing Cu²⁺ ions from aqueous solution. The effects of initial concentration, temperature, contact time, pH solution, and sorbent dosage were investigated and the optimum value of each was determined. The Langmuir isotherm model, Freundlich model, and Temkin model were used to fit our experimental results. Ultimately, using the Van't Hoff approach, the thermodynamic functions of the intended adsorption phenomenon such as ΔH°_ad, ΔS°_ad, and ΔG°_ad were estimated.     

Statistical-mechanical treatment of an adsorbed monolayer with local order: Part III. Its use in the interpretation of the adsorption behaviour of aliphatic compounds

The statistical-mechanical treatment of Part II of thi series is applied to a monolayer of water molecules and open-chain polymeric solute molecules consisting of structurally indistinguishable segments. Water molecules are assumed to interact between themselves both via dipole-dipole forces and via H-bonds, whereas water-solute and solute-solute interactions are considered to be of the dipole-dipole type. The resulting adsorption isotherm explains several features of the adsorption behaviour of aliphatic compounds, such as the Frumkin isotherm behaviour with an attractive interaction factor, the parabolic dependence of the standard Gibbs energy of adsorption ΔG°_ads on charge σ_m, the correct order of magnitude for b  ∂ ΔG°_ads/∂(σ_m  σ_max)², and the experimental dependence of b on the charge of maximum adsorption σ_max. The model also accounts satisfactorily for the shape of the experimental curves of the potential drop Δφ across the inner layer against surface coverage at constant charge. An explanation of two-dimensional condensation based on inhibition of H-bond formation between adsorbed and non-adsorbed water molecules is proposed.     

Removal of radiocobalt from aqueous solution by Mg2Al layered double hydroxide

The adsorption behavior of radiocobalt by Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of contact time, pH, ionic strength, foreign ions, FA and temperature under ambient conditions. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Co(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of FA enhanced the adsorption of Co(II) on Mg₂Al LDH at low pH, whereas reduced Co(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Co(II) better than the Freundlich and D–R model at three different temperatures of 303, 323 and 343 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Co(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

Uranium extraction from aqueous solution using dried and pyrolyzed tea and coffee wastes

The adsorption of U(VI) onto dried and pyrolyzed tea and coffee wastes was investigated. The adsorption properties of the materials were characterized by measuring uranium uptake as a function of solution pH, kinetics and adsorption isotherms. pH profile of uranium adsorption where UO₂ ²⁺ is expected to be the predominant species was measured between pH 0 and 4. Both Langmuir and Freundlich adsorption models were used to describe adsorption equilibria, and corresponding constants evaluated. Using the Langmuir model, the maximum adsorption capacity of uranium by dried tea and coffee wastes was 59.5 and 34.8 mg/g, respectively at 291 K. Adsorption thermodynamic constants, ΔH° ΔS° and ΔG° were also calculated from adsorption data obtained at three different temperatures. Adsorption thermodynamics of uranyl ions on dried tea and coffee systems indicated spontaneous and endothermic processes. Additionally, a Lagergren pseudo-second-order kinetic model was used to fit the kinetic experimental data for both adsorbents and the constants evaluated. Dried tea and coffee wastes proved to be effective adsorbents with high capacities and significant advantage of a very low cost.     

Micellization and surface activity of Triton X-100 in water–orthophosphoric medium

The adsorption isotherms of Triton X-100 for air/water–orthophosphoric acid interfaces were determined by the stripping method. The surface chemical parameters, Γ_max, F and ΔG°_A, and the aggregation ones, CMC and the ΔG_M, are determined in different H₂O/H₃PO₄ mixtures. For concentrations higher than 4 M, the values of the CMC, ΔG_M, Γ_max and ΔG°_A increase with increasing acid concentrations due to the occurring changes in the medium structure. ©2000 Académie des sciences / Éditions scientifiques et médicales Elsevier SASsurface tension / non-ionic surfactant / micellization / orthophosphoric acid     

Removal of uranium(VI) from aqueous solutions using nanoporous ZnO prepared with microwave-assisted combustion synthesis

The adsorption of the uranyl ions from aqueous solutions on the nanoporous ZnO powders has been investigated under different experimental conditions. The adsorption of uranyl on nanoporous ZnO powders were examined as a function of the contact times, pH of the solution, concentration of uranium(VI) and temperature. The ability of this material to remove U(VI) from aqueous solution was followed by a series of Langmuir and Freunlinch adsorption isotherms. The adsorption percent and distribution coefficient for nanoporous ZnO powders were 98.65 % ± 1.05 and 7,304 mL g^?1, respectively. The optimum conditions were found as at pH 5.0, contact time 1 h, at 1/5 Zn²⁺/urea ratio, 50 ppm U(VI) concentration and 303 K. The monomolecular adsorption capacity of nanoporous ZnO powders for U(VI) was found to be 1,111 mg g^?1 at 303 K. Using the thermodynamic equilibrium constants obtained at different temperatures, various thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, have been calculated. Thermodynamic parameters (ΔH° = 28.1 kJ mol ^?1, ΔS° = 160.30 J mol^?1 K^?1, ΔG° = ?48.54 kJ mol^?1) showed the endothermic and spontaneous of the process. The results suggested that nanoporous ZnO powders was suitable as sorbent material for recovery and adsorption of U(VI) ions from aqueous solutions.     

Thermodynamic studies of inclusion complex formation between alkylpyridinium chlorides and β-cyclodextrin using conductometric method

Thermodynamics on inclusion complexation of β-cyclodextrin (β-CD) with n-alkylpyridinium chlorides (C _n PC, n = 12, 14, 16) were measured by conductivity technique to evaluate the effects of chain length of C _n PC and temperature. The data obtained indicate that inclusion complexes S(CD) and S(CD)₂ had formed between surfactant and β-CD in aqueous solution. Investigation showed that the K ₁ (first equilibrium constant) for S(CD) formation is greater than K ₂ (second equilibrium constant) for S(CD)₂ formation. It has been found that C₁₂PC forms only the 1:1 complex, while C₁₄PC and C₁₆PC form 1:1 and 1:2 complexes. Thermodynamic parameters of the complexation, i.e. ΔG°, ΔH° and ΔS° have been also calculated. The large values of ΔG° indicate that complexation between surfactant and β-CD is very favorable.     

Thermodynamic characteristics of stepwise dissociation of glycyl-glycyl-glycine in aqueous solutions

The heats of interaction between glycyl-glycyl-glycine and solutions of nitric acid and potassium hydroxide are determined by calorimetry at 298.15 K and ionic strengths of 0.25, 0.50, and 0.75 in the presence of KNO₃. The standard thermodynamic characteristics (Δ_r H°, Δ_r G°, and Δ_r S°) of acid–base interaction in aqueous solutions of the peptide are calculated. The effect of background electrolyte concentration on the enthalpy of dissociation of glycyl-glycyl-glycine is discussed.     

Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.