pH-Responsive hollow polymeric microspheres and concentric hollow silica microspheres from silica-polymer core-shell microspheres

Nearly monodispersed silica-poly(methacrylic acid) (SiO 2-PMAA) core-shell microspheres were synthesized by distillation-precipitation polymerization from 3-(trimethoxysilyl)propylmethacrylate-silica (SiO 2-MPS) particle templates. SiO 2-PMAA-SiO 2 trilayer hybrid microspheres were subsequently prepared by coating of an outer layer of SiO 2 on the SiO 2-PMAA core-shell microspheres in a sol-gel process. pH-Responsive PMAA hollow microspheres with flexible (deformable) shells were obtained after selective removal of the inorganic SiO 2 core from the SiO 2-PMAA core-shell microspheres by HF etching. The pH-responsive properties of the PMAA hollow microspheres were investigated by dynamic laser scattering (DLS). On the other hand, concentric and rigid hollow silica microspheres were prepared by selective removal of the PMAA interlayer from the SiO 2-PMAA-SiO 2 trilayer hybrid microspheres during calcination. The hybrid composite microspheres, pH-sensitive hollow microspheres, and concentric hollow silica microspheres were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray (EDX) analysis.     

Cobalt oxide hollow microspheres with micro- and nano-scale composite structure: Fabrication and electrochemical performance

Co₃O₄ hollow microspheres with micro- and nano-scale composite structure self-assembled by nanosheets were successfully fabricated by the template-free wet-chemical approach. This method is simple, facile and effective. The Co₃O₄ hollow microspheres with good purity and homogeneous size were well characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform IR (FTIR), thermogravimetric analysis (TGA) and inductively coupled plasma atomic emission spectrometer (ICP). The formation mechanism was deeply studied. The micro- and nano-scale composite structure constructed by the porous nanosheets promotes to improve the electrochemical properties of Co₃O₄ hollow microspheres. The high discharge capacity of 1048 mAh g⁻¹ indicates it to be the potential application in electrode materials of Li-ion battery.     

Cagelike polymer microspheres with hollow core/porous shell structures

Submicron‐scaled cagelike polymer microspheres with hollow core/porous shell were synthesized by self‐assembling of sulfonated polystyrene (PS) latex particles at monomer droplets interface. The swelling of the PS latex particles by the oil phase provided a driving force to develop the hollow core. The latex particles also served as porogen that would disengage automatically during polymerization. Influential factors that control the morphology of the microspheres, including the reserving time of emulsions, polymerization rate, and the Hildebrand solubility parameter and polarity of the oil phase, were studied. A variety of monomers were polymerized into microspheres with hollow core/porous shell structure and microspheres with different diameters and pore sizes were obtained. The polymer microspheres were characterized by scanning electron microscopy, transmission electron microscopy, optical microscopy, and Fourier transform infrared spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 933–941, 2007     

(Phen)2.5HPW/WO3复合空心微球的制备及光催化性能

通过磷钨酸H3PW12O40(HPW)和邻菲啰啉C12H8N2(Phen)的溶液反应,合成了杂多化合物(C12H8N2)2.5H3PW12O40((Phen)2.5HPW),以WO3空心微球为载体,负载杂多化合物(Phen)2.5HPW,制备了(Phen)2.5HPW/WO3复合空心微球.用等离子体原子发射光谱(ICP...     

NiO纳米片和多孔纳米片自组装的空心微球的无模板水热法制备与磁学性质

报道一种非常简单的制备NiO和Ni(OH)₂空心微球的无模板水热法, 即通过NiCl₂与氨水在140 ℃水热反应12 h, 制备了Ni(OH)₂纳米片自组装的空心微球, 经400 ℃热处理2 h得到了NiO空心微球. 采用X射线衍射仪、扫描电镜和透射电子显微镜对产物进行表征, 并在室温下测试了它的磁学性能, 结果表明, Ni(OH)₂空心微球的直径约为3～4 μm, 它是由尺寸1.1～1.3 μm左右的六方相结构的Ni(OH)₂纳米片组装而成; NiO空心微球是由立方相纳米片和多孔纳米片组装而成, 它具有弱的铁磁性, 其矫顽力为583 Oe, 剩余磁化强度为0.213 emu/g. 研究了氨在Ni(OH)₂纳米片的形成与组装过程中的作用, 提出了可能的生长机理.     

钛基多孔HA/SiO2复合涂层的制备及性能研究

为了制得表面多孔且与基材结合强度高的羟基磷灰石(HA)涂层,实验中以正丁醇为分散介质,以SiO2粉末为添加剂,纯钛片为基材,电泳沉积制备羟基磷灰石/二氧化硅/壳聚糖/(HA/SiO2/CS)复合涂层,经后续热处理得到多孔HA/SiO2复合涂层,采用扫描电镜(SEM)、傅立叶红外光谱仪(FT-IR)、X射线衍射仪(XRD)、万能材料试验机对涂层的表面形貌、组成、结构和结合强度进行测试和表征,并通过模拟体液(SBF)浸泡法对复合涂层的生物活性进行评价.结果表明:当悬浮液中的HA/SiO2/CS质量比为1∶1∶1时,制得的HA/SiO2/CS涂层经700℃热处理后获得的HA/SiO2复合涂层孔洞分布均匀,大孔孔径在10～15μm,小孔孔径在1～5μm;涂层与基材的结合强度达到25.5 MPa;多孔HA/SiO2复合涂层在SBF中浸泡7 d后,涂层表面碳磷灰石化;说明实验中添加SiO2所制得的多孔HA/SiO2复合涂层与钛基材结合强度高,且具有良好的生物活性.     

A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

Synthesis of a Au/silica/polymer trilayer composite and the corresponding hollow polymer microsphere with a movable Au core

Gold/silica/poly(N,N'-methylenebisacrylamide) (Au/SiO2/polyMBAAm) trilayer composite materials were prepared by distillation precipitation polymerization of N,N'-methylenebisacrylamide (MBAAm) in the presence of Au/SiO2 particles as seeds, in which the seeds were prepared by a combination of gold-complexing and silane coupling agent with a further modified St?ber method. The polymerization of MBAAm was performed in neat acetonitrile with 2,2'-azobisisobutyronitrile as an initiator to encapsulate the Au/SiO2 seeds driven by the hydrogen-bonding interaction between the hydroxyl group on the surface of the seeds and the amide unit of polyMBAAm without modification of the Au/SiO2 surface in the absence of any stabilizer or surfactant. Hollow polyMBAAm microspheres with movable Au cores were further developed by the selective removal of the middle silica layer with hydrofluoric acid. The resultant trilayer Au/SiO2/polyMBAAm composite and hollow polyMBAAm microspheres with movable Au cores were characterized by transmission electron microscopy. The diffusion of chemicals across the polyMBAAm shell was investigated by a catalytic reduction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride as a reductant.     

Hydrothermal synthesis and photocatalytic property of porous CuO hollow microspheres via PS latex as templates

Porous copper oxide (CuO) hollow microspheres have been fabricated through a simple hydrothermal method using PS latex as templates. The as-obtained samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). The influences of the mole ratio of Ethylenediamine (C₂H₈N₂) and copper acetate (Cu(Ac)₂·H₂O), hydrothermal temperature and time on the size and morphologies of the final products have been investigated. The possible formation mechanism of porous CuO hollow microspheres has been proposed and the specific surface area of the hollow microspheres with 81.71 m²/g is measured by BET method. The band gap value calculated from a UV–vis absorption spectrum of porous CuO hollow microspheres is 2.71 eV. The as-synthesized product exhibits high photocatalytic activity during the photodegradation of an organic dyestuff, rhodamine B (RhB), under UV-light illumination.     

A templated method to Bi2WO6 hollow microspheres and their conversion to double-shell Bi2O3/Bi2WO6 hollow microspheres with improved photocatalytic performance

Bi(2)WO(6) hollow microspheres with dimension of ca. 1.5 μm were synthesized via a hydrothermal method using polystyrene particles as the template. The as-prepared Bi(2)WO(6) hollow microspheres can be further transformed to double-shell Bi(2)O(3)/Bi(2)WO(6) hollow microspheres. The samples were fully characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, N(2)-sorption Brunauer-Emmett-Teller surface area, UV-vis diffuse-reflectance spectroscopy, and X-ray photoelectron spectroscopy. The as-formed double-shell Bi(2)O(3)/Bi(2)WO(6) hollow microspheres exhibit enhanced photocatalytic activity due to the hollow nature and formation of the p-n junction between p-type Bi(2)O(3) and n-type Bi(2)WO(6). The study provides a general and effective method in the fabrication of composition and dimension-tunable composite hollow microspheres with sound heterojunctions that may show a variety of applications.     

Synthesis, characterization, and optical properties of well-defined N-doped, hollow silica/titania hybrid microspheres

Well-defined nitrogen-doped, hollow SiO2/TiO2 hybrid spheres were successfully prepared through a two-step sol-gel synthesis combined calcination process using triethylamine as the nitrogen source. In this approach, polystyrene (PS)/silica microspheres were first synthesized. Subsequently, the amine-treated PS/SiO2/TiO2 hybrid spheres were obtained by sol-gel method. Finally, the elimination of the PS core, nitrogen-doping process, and crystallization of amorphous TiO2 were simultaneously conducted in the calcination process to acquire the final products. The as-prepared hybrid spheres were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The results of XRD, FTIR, and XPS spectra indicated that nitrogen was really doped into the anatase TiO2 shell and confirmed that most nitrogen dopants might be present in the chemical environments of N-Ti-O and Ti-N-O. It was found that the absorption shoulder of nitrogen-doped hollow SiO2/TiO2 hybrid spheres vastly shifted to the visible region up to around 530 nm. The photoluminescence (PL) bands showed spectral lines at about 421, 472, and 529 nm, which were attributed to the self-trapped excitons, F and F+ centers. Moreover, the intensity of the PL spectra band of hollow SiO2/TiO2 hybrid spheres increased with as the amount of titanium tetrabutoxide (TBOT) precursor increased. However, the doping of nitrogen into hollow SiO2/TiO2 hybrid spheres led to the drastic quenching of photoluminescence because of the increase in the separation efficiency of the photoinduced electron and hole pairs.     

空心玻璃微珠/TiO2复合微球的制备及其性能研究

本文以脲为沉淀剂,通过化学沉淀法成功实现了锐钛矿型二氧化钛壳层在空心玻璃微珠表面的可控组装,从而制备出玻璃/二氧化钛核壳空心微球,并通过XRD、SEM、EDX和拉曼光谱对其结构、形貌、粒径、壳厚和化学组成进行了表征.提出了二氧化钛在空心玻璃微珠表面的定向生长的可能机制和形成过程.     

Monodisperse REPO4 (RE = Yb, Gd, Y) hollow microspheres covered with nanothorns as affinity probes for selectively capturing and labeling phosphopeptides

Rare-earth phosphate microspheres with unique structures were developed as affinity probes for the selective capture and tagging of phosphopeptides. Prickly REPO(4) (RE = Yb, Gd, Y) monodisperse microspheres, that have hollow structures, low densities, high specific surface areas, and large adsorptive capacities were prepared by an ion-exchange method. The elemental compositions and crystal structures of these affinity probes were confirmed by energy-dispersive spectroscopy (EDS), powder X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy. The morphologies of these compounds were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen-adsorption isotherms. The potential ability of these microspheres for selectively capturing and labeling target biological molecules was evaluated by using protein-digestion analysis and a real sample as well as by comparison with the widely used TiO(2) affinity microspheres. These results show that these porous rare-earth phosphate microspheres are highly promising probes for the rapid purification and recognition of phosphopeptides.     

Self-assembly and enhanced photocatalytic properties of BiOI hollow microspheres via a reactable ionic liquid

BiOI uniform flowerlike hollow microspheres with a hole in its surface structures have been successfully synthesized through an EG-assisted solvothermal process in the presence of ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). A possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid not only acted as solvents and templates but also as an I source for the fabrication of BiOI hollow microspheres and was vital for the structure of hollow microspheres. Additionally, we evaluated the photocatalytic activities of BiOI on the degradation of methyl orange (MO) under visible light irradiation and found that as-prepared BiOI hollow microspheres exhibited higher photocatalytic activity than BiOI nanoplates and TiO(2) (Degussa, P25) did. On the basis of such analysis, it can be assumed that the enhanced photocatalytic activities of BiOI hollow microspheres could be ascribed to its energy band structure, high BET surface area, high surface-to-volume ratios, and light absorbance.     

Self-assembled mesoporous hierarchical-like In2S3 hollow microspheres composed of nanofibers and nanosheets and their photocatalytic activity

Novel template-free hierarchical-like In(2)S(3) hollow microspheres were synthesized using thiosemicarbazide (NH(2)NHCSNH(2)) as both a sulfur source and a capping ligand in a ethanol/water system. In this study, we demonstrate that several process parameters, such as the reaction time and precursor ratio, strongly influence the morphology of the final product. The In(NO(3))(3)/thiosemicarbazide ratios were found to effectively play crucial roles in the morphologies of the hierarchical-like In(2)S(3) hollow microsphere nanostructure. With the ratios increasing from two to four, the In(2)S(3) crystals exhibited almost spherical morphologies. The synthesized products have been characterized by a variety of methods, including X-ray powder diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray (EDX) analysis, X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible diffused reflectance spectroscopy (UV-vis DRS). XRD analysis confirmed the tetragonal structure of the In(2)S(3) hollow microspheres. The products show complex hierarchical structures assembled from nanoscale building blocks. The morphology evolution can be realized on both outside (surface) and inside (hollow cavity) the microsphere. The surface area analysis showed that the porous In(2)S(3) possesses a specific surface area of 108 m(2)/g and uniform distribution of pore sizes corresponding to the size of pores resulting from the self-assembled structures with flakes. The optical properties of In(2)S(3) were also investigated by UV-vis DRS, which indicated that our In(2)S(3) microsphere samples possess a band gap of ～1.96 eV. Furthermore, the photocatalytic activity studies revealed that the synthesized In(2)S(3) hollow microspheres exhibit an excellent photocatalytic performance in rapidly degrading aqueous methylene blue dye solution under visible light irradiation. These results suggest that In(2)S(3) hollow microspheres will be an interesting candidate for photocatalytic detoxification studies under visible light radiation.     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

紫外光引发Pickering乳液聚合制备中空复合微球的研究

用光引发剂2-羟基-4-(2-羟乙氧基)-2-甲基苯丙酮(IHT-PI 659)对纳米SiO₂表面进行接枝使之兼具两亲性及光引发特性|以该功能性纳米SiO₂为稳定剂构筑O/W(水包油)型Pickering乳液|用紫外光引发处于内油相的甲基丙烯酸甲酯单体聚合, 制备出具有中空结构的SiO₂/PMMA复合微球, 采用傅里叶变换红外光谱(FTIR)、热失重分析仪(TGA)、透射电镜(TEM)及扫描电子显微镜(SEM)对复合微球进行了表征, 并提出了紫外光引发Pickering乳液聚合制备中空复合微球的机理.     

Preparation and characterization of monodisperse porous silica microspheres with controllable morphology and structure

A novel method for the preparation of monodisperse porous silica microspheres with controllable morphology and structure is reported. The starting porous polymer microspheres were first functionalized with ethylenediamine (EDA) to generate amino groups. Subsequently, silica nanoparticles were deposited in the porous polymer microsphere to form polymer/silica hybrid microspheres via a modified sol‐gel process in the presence of tetra‐n‐butylammonium bromide (TBAB) or tetramethyl ammonium hydroxide (TMAH). Upon calcination of the polymer/silica hybrid microspheres, the porous silica microspheres were obtained. The morphology, inner structure, and properties of the porous silica microspheres were studied by field emission scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, and mercury intrusion method. The results show that the presence of TBAB or TMAH in the process not only prevents the agglomeration of the hybrid microspheres, but also governs the controllable morphology from a porous inner structure to a hollow‐cage structure. The obtained porous silica microspheres exhibit no shrinkage from the polymer microspheres with a yield of around 98%. These porous silica microspheres have potential applications in the fields of chromatography, catalyst, and biology. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and properties of magnetic alumina microspheres with a γ-Fe_2O_3/SiO_2 core and Al_2O_3 shell

Magnetic alumina composite microspheres with γ-Fe 2 O 3 core/Al 2 O 3 shell structure were prepared by the oil column method. A dense silica layer was deposited on the surface of γ-Fe 2 O 3 particles (denoted as γ-Fe 2 O 3 /SiO 2 ) with a desired thickness to protect the iron oxide core against acidic or high temperature conditions. γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 particles with about 85 wt% Al 2 O 3 were obtained and showed to be suitable for practical applications as a magnetic catalyst or catalyst support due to their magnetic properties and pore structure. The products were characterized with scanning electron microscope (SEM) and transmission electron microscope (TEM), nitrogen adsorption-desorption, and vibrating sample magnetometer (VSM). The specific surface area and pore volume of the γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 composite microspheres calcined at 500 ? C were 200 m 2 /g and 0.77 cm 3 /g, respectively.     

Preparation of uniform silica/polypyrrole core/shell microspheres and polypyrrole hollow microspheres by the template of modified silica particles using different modified agents

Silica/polypyrrole (PPY) core/shell microspheres and PPY hollow microspheres were prepared by the template of silica particles whose surface character was modified with different modified agents. The morphology and structure of the particles were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Elemental analysis and X-ray photoelectron spectroscopy (XPS) were carried out to characterize the structure of PPY hollow microspheres. We investigated the effect of different modified agents on the surface character of silica particles and the effect of surface character of silica particles on the morphology of PPY hollow microspheres. The effect of reaction conditions on the size of core/shell particles and hollow particles was also studied.