Tuning of the structures of chiral phosphane-phosphites: application to the highly enantioselective synthesis of alpha-acyloxy phosphonates by catalytic hydrogenation

A family of new chiral phosphane-phosphites 5 has been prepared and employed in the synthesis of rhodium complexes of formulation [Rh(cod)(5)]BF4 (7). The use of bulky phosphane or phosphite groups in the preparation of 7 avoids the formation of undesired disubstituted complexes, one of which (9 a) has been isolated and characterized. Ligands 5 display important differences from the bulkier phosphane-phosphites 1: complexes 7-unlike their rigid [Rh(cod)(1)]BF4 counterparts-show fluxional behaviour in solution, consistent with backbone oscillation around the coordination plane. A detailed screening of ligands 1 and 5 in catalytic asymmetric hydrogenations of enol phosphonates 12 demonstrated a critical influence of the steric characteristics of the phosphane-phosphite in the course of the reaction, and optimization of the two phosphorus functionalities resulted in the production of versatile and efficient catalysts for this class of hydrogenations: enantioselectivities of up to 98% ee were thus obtained with substrates bearing an alkyl substituent in the beta-position, while for their challenging aryl counterparts values of up to 92% ee were achieved. The coordination mode of phosphonate 12 a towards a Rh phosphane-phosphite fragment has also been investigated and a preference of the olefin fragment to occupy the position cis to the phosphite group has been observed. From this observation an interpretation of the configurations of the hydrogenated phosphonates has also been made.     

Enantioselective hydrogenation with self-assembling rhodium phosphane catalysts: influence of ligand structure and solvent

Three sets of new and related chiral phospholane and phosphepine ligands have been prepared for Rh-catalyzed enantioselective hydrogenation. The size and substitution pattern of the cyclic monophosphanes were varied. More importantly, the ligands differ in the nature of the heterocyclic group linked to the trivalent phosphorus atom: 2-pyridone or 2-alkoxypyridine. In the corresponding Rh complexes, the pyridone units of two monodentate P ligands can assemble by hydrogen bonding and form chelates. In contrast, synthetic precursors bearing alkoxypyridine appendages are not able to aggregate via intramolecular hydrogen bonds. The nature of self-assembly is dependent on the nature of the P ligand and the solvent used for the hydrogenation (CH2Cl2 vs. MeOH). These features affect the rate of the reaction as well as the enantioselectivity, which varied in the range of 0-99 % ee Complexation studies and DFT calculations were performed to explain these differences.     

Mechanistic insights into iridium-catalyzed asymmetric hydrogenation of dienes

Hydrogenation of 2,3-diphenylbutadiene (1) with the chiral carbene-oxazoline-iridium complex C has been studied by means of a combined experimental and computational approach. A detailed kinetic profile of the reaction was obtained with respect to consumption of the substrate and formation of the intermediate half-reduction products, 2,3-diphenylbut-1-ene (2) and the final product, 2,3-diphenylbutane (3). The data generated from these analyses, and from NMR experiments, revealed several facets of the reaction. After a brief induction period (presumably involving reduction of the cyclooctadiene ligand on C), the diene concentration declines in a zero-order process primarily to give monoene intermediates. When all the diene is consumed, the reaction accelerates and compound 3 begins to accumulate. Interestingly, the prevalent enantiomer of the monoene intermediate 2 is converted mostly to meso-3 so the enantioselectivity of the reaction appears to reverse. The reaction seems to be first-order with respect to the catalyst when the catalyst concentration is less than 0.0075 M; diffusion of hydrogen across the gas-liquid interface complicates the analysis at higher catalyst concentrations. Similarly, these diffusion effects complicated measurements of reaction rate versus applied pressure of dihydrogen; other factors like stir speed and flask geometry come into play under some, but not all, the conditions examined. Density functional theory (DFT) calculations, using the PBE method, were used to probe the reaction. These studies indicate a transoid-eta(4)-diene-dihydride complex forms in the first stages of the catalytic cycle. Further reaction requires dissociation of one alkene ligand to give a eta(2)-diene-dihydride-dihydrogen intermediate. A catalytic cycle that features Ir(3+)/Ir(5+) seems to be involved thereafter.     

Synthesis and application of chiral N-heterocyclic carbene-oxazoline ligands: iridium-catalyzed enantioselective hydrogenation

Two libraries of enantiomerically pure imidazolium salts bearing an oxazoline unit were synthesized. Deprotonation of the imidazolium salts and complexation of the resulting oxazoline-carbene ligands to iridium(I) was achieved in one step by mixing the imidazolium salts with NaOtBu and [(eta(4)-cod)IrCl](2) in THF at room temperature. The air-stable complexes were purified by flash chromatography. All complexes were analyzed by two-dimensional (2D) NMR methods and one compound from each family was characterized by X-ray structure analysis. The two libraries of iridium complexes were successfully tested in the asymmetric hydrogenation of unfunctionalized and functionalized olefins. Enantioselectivities of up to 90 % ee were obtained with trans-alpha-methylstilbene. Upon complexation of imidazolium salt 15 p with R(1) = phenyl, C-H bond activation of the phenyl ring gave rise to iridium(III) complex 17, which was fully characterized by NMR spectroscopy and X-ray structure analysis. Complex 17 proved to be catalytically inactive in the hydrogenation.     

Osmium pyme complexes for fast hydrogenation and asymmetric transfer hydrogenation of ketones

The osmium compound trans,cis-[OsCl2(PPh3)2(Pyme)] (1) (Pyme=1-(pyridin-2-yl)methanamine), obtained from [OsCl2(PPh3)3] and Pyme, thermally isomerizes to cis,cis-[OsCl2(PPh3)(2)(Pyme)] (2) in mesitylene at 150 degrees C. Reaction of [OsCl2(PPh3)3] with Ph2P(CH2)(4)PPh2 (dppb) and Pyme in mesitylene (150 degrees C, 4 h) leads to a mixture of trans-[OsCl2(dppb)(Pyme)] (3) and cis-[OsCl2(dppb)(Pyme)] (4) in about an 1:3 molar ratio. The complex trans-[OsCl2(dppb)(Pyet)] (5) (Pyet=2-(pyridin-2-yl)ethanamine) is formed by reaction of [OsCl2(PPh3)3] with dppb and Pyet in toluene at reflux. Compounds 1, 2, 5 and the mixture of isomers 3/4 efficiently catalyze the transfer hydrogenation (TH) of different ketones in refluxing 2-propanol and in the presence of NaOiPr (2.0 mol %). Interestingly, 3/4 has been proven to reduce different ketones (even bulky) by means of TH with a remarkably high turnover frequency (TOF up to 5.7 x 10(5) h(-1)) and at very low loading (0.05-0.001 mol %). The system 3/4 also efficiently catalyzes the hydrogenation of many ketones (H2, 5.0 atm) in ethanol with KOtBu (2.0 mol %) at 70 degrees C (TOF up to 1.5 x 10(4) h(-1)). The in-situ-generated catalysts prepared by the reaction of [OsCl2(PPh3)3] with Josiphos diphosphanes and (+/-)-1-alkyl-substituted Pyme ligands, promote the enantioselective TH of different ketones with 91-96 % ee (ee=enantiomeric excess) and with a TOF of up to 1.9 x 10(4) h(-1) at 60 degrees C.     

Rh-catalyzed asymmetric hydrogenation of prochiral olefins with a dynamic library of chiral TROPOS phosphorus ligands

A library of 19 chiral tropos phosphorus ligands, based on a flexible (tropos) biphenol unit and a chiral P-bound alcohol (11 phosphites) or secondary amine (8 phosphoramidites), was synthesized. These ligands were screened, individually and as a combination of two, in the rhodium-catalyzed asymmetric hydrogenation of dehydro-alpha-amino acids, dehydro-beta-amino acids, enamides and dimethyl itaconate. ee values up to 98% were obtained for the dehydro-alpha-amino acids, by using the best combination of ligands, a phosphite [4-P(O)2O] and a phosphoramidite [13-P(O)2N]. Kinetic studies of the reactions with the single ligands and with the combination of phosphite [4-P(O)2O] and phosphoramidite [13-P(O)2N] have shown that the phosphite, despite being less enantioselective, promotes the hydrogenation of methyl 2-acetamidoacrylate and methyl 2-acetamidocinnamate faster than the mixture of the same phosphite with the phosphoramidite, while the phosphoramidite alone is much less active. In this way, the reaction was optimized by lowering the phosphite/phosphoramidite ratio (the best ratio is 0.25 equiv phosphite/1.75 equiv phosphoramidite) with a resulting improvement of the product enantiomeric excess. A simple mathematical model for a better understanding of the variation of the enantiomeric excess with the phosphite/phosphoramidite ratio is also presented.     

Origin of stereoinduction by chiral aminophosphane phosphinite ligands in enantioselective catalysis: asymmetric hydroformylation

The origin of stereoinduction by chiral aminophosphane phosphinite (AMPP) ligands in asymmetric hydroformylation was investigated with a theoretical approach. The roles of the stereogenic center at the aminophosphane phosphorus atom (NP*) and of the chirality of the backbone were analyzed by considering three experimentally tested cases: 1) P-stereogenic yielding high ee, 2) P-nonstereogenic yielding low ee, and 3) P-stereogenic yielding low ee. We succeeded in reproducing the experimentally observed trends for the three studied AMPP ligands. Our results indicated that alkene insertion into the rhodium-hydride bond is the selectivity-determining step, and not alkene coordination. Additional calculations on model systems revealed that the different nonbonding weak-type interactions of styrene with the substituents of the NP* stereogenic center in an axial position is responsible for stereodifferentiation. The chirality of the AMPP backbone plays a secondary role. The rationalization of the stereochemical outcome is not straightforward, because two competitive equatorial/axial reaction paths, showing opposite asymmetric induction, must be considered. Construction of stereochemical models and evaluation of stereoinduction for novel ligand systems suggested that two prerequisites are required to improve the performance of AMPP-type ligands in asymmetric hydroformylation: 1) combination of stereorecognition and stereohindrance by substituents at the NP* atom, and 2) more rigid backbones.     

Mixtures of chiral and achiral monodentate ligands in asymmetric Rh-catalyzed olefin hydrogenation: reversal of enantioselectivity

The recently described method of combinatorial asymmetric transition metal catalysis based on the use of mixtures of chiral monodentate P-ligands has been extended to include mixtures of chiral and achiral monodentate P-ligands, reversal of enantioselectivity in Rh-catalyzed olefin hydrogenation being possible in appropriate cases.     

Asymmetric Hydrogenations (Nobel Lecture)

The start of the development of catalysts for asymmetric hydrogenation was the concept of replacing the triphenylphosphane ligand of the Wilkinson catalyst with a chiral ligand. With the new catalysts, it should be possible to hydrogenate prochiral olefins. Knowles and his co‐workers were convinced that the phosphorus atom played a central role in this selectivity, as only chiral phosphorus ligands such as (R,R)‐DIPAMP, whose stereogenic center lies directly on the phosphorus atom, lead to high enantiomeric excesses when used as catalysts in asymmetric hydrogenation reactions. This hypothesis was disproven by the development of ligands with chiral carbon backbones. Although the exact mechanism of action of the phosphane ligands is not incontrovertibly determined to this day, they provide a simple entry to a large number of chiral compounds.     

QM/MM modeling of enantioselective pybox-ruthenium- and box-copper-catalyzed cyclopropanation reactions: scope, performance, and applications to ligand design

An extensive comparison of full-QM (B3LYP) and QM/MM (B3LYP:UFF) levels of theory has been made for two enantioselective catalytic systems, namely, Pybox-Ru and Box-Cu complexes, in the cyclopropanation of alkenes (ethylene and styrene) with methyl diazoacetate. The geometries of the key reaction intermediates and transition structures calculated at the QM/MM level are generally in satisfactory agreement with full-QM calculated geometries. More importantly, the relative energies calculated at the QM/MM level are in good agreement with those calculated at the full-QM level in all cases. Furthermore, the QM/MM energies are often in better agreement with the stereoselectivity experimentally observed, and this suggests that QM/MM calculations can be superior to full-QM calculations when subtle differences in inter- and intramolecular interactions are important in determining the selectivity, as is the case in enantioselective catalysis. The predictive value of the model presented is validated by the explanation of the unusual enantioselectivity behavior exhibited by a new bis-oxazoline ligand, the stereogenic centers of which are quaternary carbon atoms.     

Theoretical insights into the role of a counterion in copper-catalyzed enantioselective cyclopropanation reactions

The effect of a coordinating counteranion on the mechanism of Cu(I)-catalyzed cyclopropanation has been investigated extensively for a medium-sized reaction model by means of theoretical calculations at the B3LYP/6-31G(d) level. The main mechanistic features are similar to those found for the cationic (without a counteranion) mechanism, the rate-limiting step being nitrogen extrusion from a catalyst-diazoester complex to generate a copper-carbene intermediate. The cyclopropanation step takes place through a direct carbene insertion of the metal-carbene species to yield a catalyst-product complex, which can finally regenerate the starting complex. However, the presence of the counteranion has a noticeable influence on the calculated geometries of all the intermediates and transition structures. Furthermore, the existence of a preequilibrium with a dimeric form of the catalyst, together with a higher activation barrier in the insertion step, explains the lower yield of cyclopropane products observed experimentally in the presence of chloride counterion. The stereochemical predictions of a more realistic model (made by considering a chiral bis(oxazoline)-copper(i) catalyst) have been rationalized in terms of the lack of significant steric repulsions, and the model shows good agreement with the low enantioselectivities observed experimentally for these kinds of catalytic systems.     

The Challenge of Linear (E)‐Enones in the Rh‐Catalyzed,Asymmetric 1,4‐Addition Reaction of Phenylboronic Acid: A DFT Computational Analysis

Why are linear (E)‐enones such challenging substrates in the Rh‐catalyzed asymmetric arylation with boronic acids, which is one of the most important asymmetric catalysis methods? DFT computations show that these substrates adopt a specific conformation in which the largest substituent is antiperiplanar to Rh^I π‐complexed with the C?C bond within the enantioselectivity‐determining carborhodation transition state. Additionally, for such structures, there is a strong, but not exclusive, preference for s‐cis enone conformation. This folding minimizes steric interactions between the substrate and the ligand, and hence reduces the enantioselectivity. This idea is further confirmed by investigating three computation‐only substrate “probes”, one of which is capable of double asymmetric induction, and a recent computationally designed 1,5‐diene ligand. On average, excellent agreement between predicted and experimental enantioselectivity was attained by a three‐pronged approach: 1) thorough conformational search within ligand and substrate subunits to locate the most preferred carborhodation transition state; 2) including dispersion interaction and long‐range corrections by SMD/ωB97xD/DGDZVP level of theory; and 3) full substrate and ligand modeling. Based on the results, a theory‐enhanced enantioselectivity model that is applicable to both chiral diene and diphosphane ligands is proposed.