Interaction between the boundary layer and a supersonic flow when part of the wall is rapidly heated

There have been many theoretical studies of aspects of the unsteady interaction of an exterior inviscid flow with a boundary layer [1–9]. The mathematical flow models obtained in these studies by the method of matched asymptotic expansions describe a wide range of phenomena observed experimentally. These include boundary layer separation near the hinge of a flap, the flow in the neighborhood of the trailing edge of an oscillating airfoil [1–2], and the development and propagation of perturbations in a boundary layer excited by an oscillating wall or some other way [3–5]. The present paper studies the interaction of an unsteady boundary layer with a supersonic flow when a small part of the surface of a body in the flow is rapidly heated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 66–70, January–February, 1984.     

Relaxation effects associated with the flow of a dense gas through a porous medium

Unsteady processes of gas and Newtonian liquid flow through porous media are usually described within the framework of the standard elastic regime model [1, 2]. At the same time, from general theoretical considerations it is clear that for fairly small characteristic times of variation of the pressure and the seepage velocity the elastic regime model loses its validity and more general relaxation flow models [3, 4] must be employed. It is therefore important to determine the limits of applicability of the elastic regime model. For this purpose the unsteady process of gas flow from one vessel to another through a porous medium has been investigated theoretically and experimentally for small pressure differences and absolute pressures up to 50 MPa. It is shown that the experimental results diverge sharply from the theoretical predictions based on the elastic regime model. It is therefore proposed that for unsteady processes a generalization of Darcy's law with a relaxation kernel be employed. From the results of the experiments it is possible to determine the parameters of the kernel characterizing the internal relaxation processes in the porous medium-dense gas system.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 105–113, January–February, 1991.     

Stability of the motion of a rigid body in an unsteady flow

The problem of rigid-body motion in an unsteady gas flow is considered using a flow model [1] in which the motion of the body is described by a system of integrodifferential equations. The case in which among the characteristic exponents of the fundamental system of solutions of the linearized equations there are not only negative but also one zero exponent is analyzed. The instability conditions established with respect to the second-order terms on the right sides of the equations are noted. The problem may be regarded as a generalization of the problem of the lateral instability of an airplane in the critical case solved by Chetaev [2], pp. 407–408.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 18–22, May–June, 1989.     

Unsteady viscous shock layer near the leading edge of a wing of infinite span

The effect of unsteady injection and wall temperature variation on the parameters of the viscous shock layer near the stagnation line of a wing of infinite span at an angle of slip is investigated on the basis of the viscous shock layer model. An analytic solution of the nonstationary problem, valid near the surface of the wing for strong injection, is obtained. A numerical investigation is carried out and some results of calculating the unsteady viscous shock layer equations for various forms of the time dependence of the injection velocity and wing surface temperature are presented. The calculations are based on a finite-difference method of the second order of approximation in the space variable and the first order of approximation in time, which makes use of expression of the equations in divergence form, Newtonian linearization and vector sweeps across the shock layer. In the steady-state case the results of the calculations are in good agreement with the data of [7].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 90–95, January–February, 1988.     

Interaction of a two-dimensional nonstationary gas stream with a free cylindrical body in a channel

The stability of a circular cylinder in an unsteady gas stream is investigated in the case when shock waves are formed and interact in the flow region. The problem is of interest for simulating processes in light-gas mortars [2, 3] in which free bodies are launched by a gas stream [4] and the launching tube will be destroyed if the launched object strikes it at a high velocity.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 180–184, March–April, 1981.     

Unsteady three-dimensional viscous shock layer in nonuniform gas flow in the neighborhood of a stagnation point

The combined influence of unsteady effects and free-stream nonuniformity on the variation of the flow structure near the stagnation line and the mechanical and thermal surface loads is investigated within the framework of the thin viscous shock layer model with reference to the example of the motion of blunt bodies at constant velocity through a plane temperature inhomogeneity. The dependence of the friction and heat transfer coefficients on the Reynolds number, the shape of the body and the parameters of the temperature inhomogeneity is analyzed. A number of properties of the flow are established on the basis of numerical solutions obtained over a broad range of variation of the governing parameters. By comparing the solutions obtained in the exact formulation with the calculations made in the quasisteady approximation the region of applicability of the latter is determined. In a number of cases of the motion of a body at supersonic speed in nonuniform media it is necessary to take into account the effect of the nonstationarity of the problem on the flow parameters. In particular, as the results of experiments [1] show, at Strouhal numbers of the order of unity the unsteady effects are important in the problem of the motion of a body through a temperature inhomogeneity. In a number of studies the nonstationary effect associated with supersonic motion in nonuniform media has already been investigated theoretically. In [2] the Euler equations were used, while in [3–5] the equations of a viscous shock layer were used; moreover, whereas in [3–4] the solution was limited to the neighborhood of the stagnation line, in [5] it was obtained for the entire forward surface of a sphere. The effect of free-stream nonuniformity on the structure of the viscous shock layer in steady flow past axisymmetric bodies was studied in [6, 7] and for certain particular cases of three-dimensional flow in [8–11].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–180, May–June, 1990.     

Applicability of a model of the formation of a molecular beam under conditions of translational disequilibrium

In the model of the formation of a molecular beam proposed in [1], Kantrowitz and Grey assumed ideal conditions, namely, the gas stream expands in accordance with an isentropic law, the introduction of the skimmer into the gas stream does not disturb the flow upstream, and the entrance section of the skimmer is the surface of the last collisions. In reality, these assumptions are not always satisfied. In the case of rapid expansion of a supersonic stream of rarefied gas there is a departure from isentropic behavior because of the freezing of the relaxation processes, and the formation of a molecular beam by means of a skimmer changes the gas-dynamic parameters [2, 3]. The aim of the present work was to make a direct experimental verification of the applicability of the model of molecular beam formation from a supersonic stream of rarefied gas under conditions of translational disequilibrium.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 170–173, May–June, 1980.     

Viscous shock layer near the stagnation point on a rotating body with unsteady injection and surface cooling

Unsteady supersonic flow regimes in the neighborhood of a stagnation point are investigated on the basis of a system of viscous shock layer equations [10] containing all the terms of the Euler equations and the boundary layer equations. An analytic solution of the unsteady equations valid near the surface of the body is found in the case of strong injection. The unsteady equations of the viscous shock layer are solved numerically on the basis of a divergent implicit scheme of the second order of approximation across the shock layer, using Newtonian linearization and vector sweep methods with allowance for the boundary relations on the surface of the body and at the isolated bow shock. Certain calculation results illustrating the effect of injection, surface cooling, the swirl of the external flow and the angular velocity of the body on the structure of the steady and unsteady viscous shock layer are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 114–122, September–October, 1987.     

Laminarization of boundary layer flow on a vibrating wing

A new type of Tollmien-Schlichting wave excitation, experimentally detected in [6] in investigating the unsteady perturbation field downstream from roughness on the surface of a vibrating wing, is studied. It is shown that the generation mechanism consists in the nonlinear interaction between the unsteady disturbance produced by the vibrations of the smooth wall and the steady nonuniformity of the boundary layer above the roughness.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.2, pp. 26–34, March–April, 1993.     

Two-phase mass injection from the stagnation zone of a blunt body in a hypersonic flow

A mathematical model of the hypersonic steady gas flow over the stagnation zone of an axisymmetric blunt body with given two-phase injection from the surface is proposed. The two-continuum model of a dusty gas [3] is used for describing the flow in the region of the wall. The problem is solved in the boundary layer and thin viscous shock layer approximations. On the basis of the numerical calculations the distribution of the parameters of the carrier and dispersed phases near the axis of symmetry is obtained. The similarity parameters determining the convective heat transfer are found. The stagnation point heat fluxes with and without particles are compared. The range of parameters on which particles can significantly reduce the heat transfer is determined.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 60–66, July–August, 1992.     

Blowing into a supersonic stream through a permeable surface

Distributed blowing of gas into a supersonic stream from flat surfaces using an inviscid flow model was studied in [1–9]. A characteristic feature of flows of this type is the influence of the conditions specified on the trailing edge of the body on the complete upstream flow field [3–5]. This occurs because the pressure gradient that arises on the flat surface is induced by a blowing layer whose thickness in turn depends on the pressure distribution on the surface. The assumption of a thin blowing layer makes it possible to ignore the transverse pressure gradient in the layer and describe the flow of the blown gas by the approximate thin-layer equations [1–5]. In addition, at moderate Mach numbers of the exterior stream the flow in the blowing layer can be assumed to be incompressible [3]. In [7, 8] a solution was found to the problem of strong blowing of gas into a supersonic stream from the surface of a flat plate when the blowing velocity is constant along the length of the plate. In the present paper, a different blowing law is considered, in accordance with which the flow rate of the blown gas depends on the difference between the pressures on the surface over which the flow occurs and in the reservoir from which the gas is supplied. As in [8, 9], the solution is obtained analytically in the form of universal formulas applicable for any pressure specified on the trailing edge of the plate.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 108–114, September–October, 1980.I thank V. A. Levin for suggesting the problem and assistance in the work.     

Calculation of unsteady natural concentration convection in binary mixtures of gases with arbitrary ratio of their densities

The approximate system of equations formulated by Nikulin, Potekhin, and Strelets [1] can, in contrast to the system in the Boussinesq approximation [2], be used to describe natural concentration convection in the presence of significant changes in the composition in gas mixtures with arbitrary ratio of the molecular weights of the components. In the present paper the possibilities opened up by the use of this system of equations are illustrated by the example of a numerical investigation of unsteady free convection of an isothermal binary gas mixture in a closed rectangular region in a wide range of variation of the Archimedes number and the ratio of the molecular weights of the components of the mixture.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 27–31, July–August, 1982.     

Influence of the viscous boundary layer on the deposition of particles from a gas suspension flowing past a sphere

The flow of incompressible gas containing particles past bodies of simple shapes at moderate and high velocities is investigated in [1–5], in which the flow of the carrier medium is assumed to be irrotational. The estimates made in [3] for the neighborhood of the stagnation point show that it is necessary to take into account the viscous boundary layer in the case of fine particles. In the present paper, the viscous flow of a gas suspension over the front surface of a sphere at Reynolds numbers R = 10³–10⁷ is considered. It is assumed that the carrier gas is incompressible and the particle concentra ion negligibly small. The influence of the boundary layer on the particle trajectories and the deposition of the disperse phase on the surface of the sphere is investigated. It is shown that there is a wide range of flow parameters for the gas suspension in which the influence of the boundary layer is important. The limits of this range are established.Translated from Izvestiya Akademli Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 59–66, January–February, 1982.I thank Yu. P. Savel'ev for a helpful discussion of the work.     

Numerical simulation of shock wave intersections

A large number of papers, generalized and classified in [1, 2], have been devoted to unsteady gas flows arising in shock wave interaction. Experimental results [3–5] and theoretical analysis [6–9] indicate that the most interesting and least studied types of interaction arise in cases when there are several shock waves. At the same time, nonlinear effects, which depend largely on the nature of the shock wave intersections, become appreciable. Regions of existence of different types, of plane shock wave intersections have been analyzed in [10–13]. It has been shown that in a number of cases the simultaneous existence of different types of intersections is possible. The aim of the present paper is to study unsteady shock wave intersections in the framework of a numerical solution of the axisymmetric boundary-value problem that arises in the diffraction of a plane shock wave on a cone in a supersonic gas flow. Flow regimes that augment the experimental data of [3–5] and the theoretical analysis of [9] are considered.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 134–140, September–October, 1986.     

Boundary layer on a blunt body in a flow of dusty gas

The problem of interaction of gas-dust flows with solid surfaces arose in connection with the study of the motion of aircraft in a dusty atmosphere [1–2], the motion of a gas suspension in power generators, and in a number of other applications [3]. The presence of a disperse admixture may lead to a significant increase in the heat fluxes [4] and to erosion of the surface [5]. These phenomena are due to the joint influence of several factors — the change in the structure of the carrier-phase boundary layer due to the presence of the particles, collisions of the particles with the surface, roughness of the ablating surface, and so forth. This paper continues an investigation begun earlier [6–7] into the influence of particles on the structure of the dynamical and thermal two-phase boundary layer formed around a blunt body in a flow. The model of the dusty gas [8] has an incompressible carrier phase. The method of matched asymptotic expansions [9] is used to obtain the equations of the two-phase boundary layer. In the frame-work of the refined classification made by Stulov [6], it is shown that the form of the boundary layer equations is different in the presence and absence of inertial precipitation of the particles. The equations are solved numerically in the neighborhood of the stagnation point of the blunt body. The temperature and phase velocity distributions in the boundary layer, and also the friction coefficients and the heat transfer of the carrier phase are found for a wide range of the determining parameters. In the case of an admixture of low-inertia particles that are not precipitated on the body, it is shown that even when the mass concentration of the particles in the undisturbed flow is small their accumulation in the boundary layer can lead to a sharp increase in the thermal fluxes at the stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 99–107, September–October, 1985.I thank V. P. Strulov for a discussion.     

Solute dispersion in a pulsating flow

The one-dimensional model proposed by Taylor [1] of the dispersion of soluble matter describes approximately the distribution of the solute concentration averaged over the tube section in Poiseuille flow. Aris [2] obtained more accurately the effective diffusion coefficient in Taylor's model and solved the problem for the general case of steady flow in a channel of arbitrary section. Many papers have been published in the meanwhile devoted to particular applications of this theory (for example, [3–5]). Various dispersion models have been constructed [6–8] that make the Taylor—Aris model more accurate at small times and agree with it at large times. The acceleration of the mixing of the solute considered in these models in the presence of the simultaneous influence of molecular diffusion and convective transport also operates in unsteady flows. In particular, the presence of velocity pulsations influences the growth of the dispersion even if the mean flow velocity is equal to zero at every point of the flow. In the present paper, the Taylor—Aris theory is extended to the case of laminar flows with periodically varying flow velocity.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 24–30, September–October, 1982.     

Asymptotic structure of inviscid disturbances in a thin shock layer

The WKB method, used in [4] to analyze the short-wave instability of a supersonic mixing layer, is employed to investigate various types of inviscid three-dimensional short-wave disturbances in a thin shock layer of perfect gas with arbitrary velocity and temperature distributions across the layer. Simple analytic expressions for the dispersion relations are obtained for neutral disturbances. The results of an asymptotic analysis are compared with direct numerical calculations for a simple model of the shock layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 72–79, November–December, 1988.     

Unsteady thermocapillary convection in a nonuniformly heated fluid layer

In many technological processes, thin extended layers of nonuniformly heated fluid are used [1–3]. If they are sufficiently thin, thermocapillary forces have a decisive influence on the occurrence and development of motion of the fluid [4–6]. Investigation of convective motion in such a layer is of great interest for estimating the intensity of heat and mass transfer in technological processes. This paper is a study of unsteady thermocapillary motion in a layer of viscous incompressible fluid with free surface in which a thermal inhomogeneity is created at the initial time. Approximate expressions are obtained for the fields of the velocity, temperature, and pressure in the fluid, and also for the shape of the free surface.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 17–25, May–June, 1991.     

Strong mass injection at the surface of a blunt body in a supersonic flow

The case of supersonic flow over a blunt body when another gas is injected through the surface of the body in accordance with a given law is theoretically investigated. If molecular transport processes are neglected, the flow between the shock wave and the surface of the body should be regarded as two-layer, that is, as consisting of the flow in the shock layer between the shock wave and the contact surface and the flow in the layer of injected gas. A numerical solution of the problem is obtained near the front of the body and its accuracy is estimated. Approximate analytic solutions are obtained in the injected-gas layer: a constant-density solution and a solution of the boundary-layer type in the local similarity approximation. Near the flow axis the numerical and analytic solutions are fairly close, but at a distance from the axis the assumptions made reduce the accuracy of the approximate solutions. The flow in question can serve as a gas-dynamic model of a series of problems describing the radiant heating of blunt bodies in a hypersonic flow. In the presence of intense radiative heat transfer, vaporization is so great that the thickness of the vapor layer is comparable with the thickness of the shock layer. Moreover, the thermal shielding of various kinds of obstacles in channels through which a radiating plasma flows can be organized by means of the forced injection of a strong absorber. The formulation of a similar problem was reported in [1], but the results of the solution were not given. A two-layer model of the flow of an ideal gas over a blunt body was used in [2, 3] for the analysis of radiative heat transfer. In [2] the neighborhood of the stagnation point is considered. In [3] preliminary results relating to two-layer flow over blunt cones are presented. The solution is obtained by Maslen's approximate method.Moscow. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 89–97, March–April, 1972.     

Flow around a sphere by a two-phase supersonic jet

Results are presented of a calculation of the flow around a sphere of a two-phase supersonic jet, discharging into a vacuum. Calculations were performed by the determination method with use of a difference grid constructed on the basis of characteristic ratios [1], The parameters of the unperturbed jet were determined with the two-velocity and two-temperature model of mutually penetrating flows of continuous media (gas and particles) [2, 3] by the network method [4]. In calculating the flow around the sphere, as in [5–7], it was assumed that the particles do not affect the gas flow in the shock layer. An analysis of the effect of particles on gasdynamic parameters in a shock layer was performed in [8].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 171–176, November–December, 1978.The authors are grateful to A. N. Nikulin for providing the program for calculation of flow about a blunt body by a uniform supersonic flow.