核磁方法研究离子液体与丙酮的相互作用

运用核磁共振手段, 研究了室温离子液体1-辛基-3-甲基咪唑四氟硼酸盐([C8mim][BF4])在不同比例的离子液体／丙酮混合体系中1H和13C的化学位移及13C的自旋-晶格弛豫时间(T1). 结果表明, 离子液体[C8mim][BF4]的阳离子芳环上的氢原子, 以及与氮原子直接相连的甲基和亚甲基上的氢原子都与丙酮羰基上的氧原子有相互作用, 从而减弱了离子液体阴阳离子间的强相互作用, 使离子液体的运动加快, 黏度降低.     

Effect of ionic liquids in unimolecular solvolysis reactions involving carbocationic intermediates

Solvolysis studies of pivaloyl triflate were performed using ionic liquid/methanol solvent mixtures. The rearranged carbocation intermediate reacts with methanol via nucleophilic attack or elimination of a proton. Relative amounts of products were determined through ¹H NMR analysis. For most ionic liquids, increasing the ionic liquid:methanol ratio leads to increased yields of elimination product. Product ratios vary based on Kamlet–Taft solvatochromic parameters of hydrogen bond donating and accepting ability of the ionic liquid.     

The effect of hydrogen bond acceptor properties of ionic liquids on their cellulose solubility

It is nowadays well-known that ionic liquids can dissolve cellulose. However, little systematic data has been published that shed light onto the influence of the ionic liquid structure on the dissolution of cellulose. We have conducted 1H NMR spectroscopy of ethanol in a large number of ionic liquids, and found an excellent correlation of the data obtained with the hydrogen acceptor properties (β-values). With this tool in hand, it is possible to distinguish between cellulose-dissolving and non-dissolving ionic liquids. A modulating effect of both, the anion of the non-dissolving ionic liquid and its cation was found in solubility studies with binary ionic liquid mixtures. The study was extended to other non-dissolving liquids, namely water and dimethylsulfoxide, and the effect of the cation was also investigated.     

Effect of ionic aggregates of sulphonate groups on the liquid crystalline behaviours of liquid crystalline elastomers

A series of siloxane-based liquid crystalline elastomers containing biphenyl benzoate mesogenic units and ionic Brilliant Yellow moieties was synthesized. The chemical structures and liquid crystalline properties of the samples were characterized by FTIR, ¹H NMR, DSC, POM and XRD. The effective crosslink density of the ionic elastomers was determined by swelling experiments in organic/buffer mixtures. All the polymers displayed a smectic mesophase. It was shown that the glass transition and melting point temperatures of the polymers increased slightly with increasing content of ionic and mesogenic groups in the polymers, while the liquid crystal mesophase region decrease slightly.     

Enhanced lithium transference numbers in ionic liquid electrolytes

Ion transport processes in mixtures of N-butyl- N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide (BMP-TFSI) and lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) were characterized by ac impedance spectroscopy and pulsed field gradient NMR. Molar ratios x = n Li-TFSI/( n Li-TFSI + n BMP-TFSI) up to 0.377 could be achieved without crystallization. From the bulk ionic conductivity and the individual diffusion coefficients of cations and anions we calculate the Haven ratio and the apparent lithium transference number. Although the Haven ratio exhibits typical values for ionic liquid electrolytes, the maximal apparent lithium transference number is higher than found in other recent studies on ionic liquid electrolytes containing lithium ions. On the basis of these results we discuss strategies for further improving the lithium transference number of such electrolytes.     

Relative volatilities of ionic liquids by vacuum distillation of mixtures

The relative volatilities of a variety of common ionic liquids have been determined for the first time. Equimolar mixtures of ionic liquids were vacuum-distilled in a glass sublimation apparatus at approximately 473 K. The composition of the initial distillate, determined by NMR spectroscopy, was used to establish the relative volatility of each ionic liquid in the mixture. The effect of alkyl chain length was studied by distilling mixtures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids, or mixtures of N-alkyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids, with different alkyl chain lengths. For both classes of salts, the volatility is highest when the alkyl side chain is a butyl group. The effect of cation structure on volatility has been determined by distilling mixtures containing different types of cations. Generally speaking, ionic liquids based on imidazolium and pyridinium cations are more volatile than ionic liquids based on ammonium and pyrrolidinium cations, regardless of the types of counterions present. Similarly, ionic liquids based on the anions [(C2F5SO2)2N](-), [(C4F9SO2)(CF3SO2)N](-) , and [(CF3SO2)2N](-) are more volatile than ionic liquids based on [(CF3SO2)3C](-) and [CF3SO3](-), and are much more volatile than ionic liquids based on [PF6](-).     

Characterization of the ability of CO2 to act as an antisolvent for ionic liquid/organic mixtures

This paper discusses the ability of CO2 to induce liquid/liquid-phase separation in mixtures of ionic liquids and organics. New data for the solubility of CO2 in the ionic liquid/organic mixtures and the volume expansion of the mixtures with added CO2 are used to analyze the results. Acetonitrile, 2-butanone, and 2,2,2-trifluoroethanol are chosen to distinguish dipolar and hydrogen-bonding interactions. Likewise, 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, 1-n-hexyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, 1-n-hexyl-3-methylimidazolium triflate, and ethyl-dimethyl-propylammonium bis (trifluoromethylsulfonyl)imide were studied to vary hydrogen-bond-donating and -accepting abilities of the ionic liquids. Primarily, the ability of CO2 to act as an antisolvent depends on the solubility of the CO2 in the ionic liquid/organic mixture. Strong hydrogen bonding between the ionic liquid and the organic makes it more difficult for CO2 to induce a liquid/liquid-phase separation.     

Thermophysical properties of binary mixtures of {ionic liquid 2-hydroxy ethylammonium acetate + (water,methanol, or ethanol)}

In this work, density and speed of sound data of binary mixtures of an ionic liquid consisting of {2-hydroxy ethylammonium acetate (2-HEAA) + (water, methanol, or ethanol)} have been measured throughout the entire concentration range, from the temperature of (288.15 to 323.15) K at atmospheric pressure. The excess molar volumes, variations of the isentropic compressibility, the apparent molar volume, isentropic apparent molar compressibility, and thermal expansion coefficient were calculated from the experimental data. The excess molar volumes were negative throughout the whole composition range. Compressibility data in combination with low angle X-ray scattering and NMR measurements proved that the presence of micelles formed due to ion pair interaction above a critical concentration of the ionic liquid in the mixtures. The Peng–Robinson equation of state coupled with the Wong–Sandler mixing rule and COSMO–SAC model was used to predict densities and the calculated deviations were lower than 3%, for binary mixtures in all composition range.     

Nuclear magnetic resonance spectroscopic studies of the trihexyl (tetradecyl) phosphonium chloride ionic liquid mixtures with water

Tetra-alkyl Phosphonium ionic liquids are phosphonium salts with melting points near room temperature. We report the NMR studies of water-trihexyl (tetradecyl) phosphonium chloride ionic liquid mixtures. The proton chemical shifts were used to investigate the intermolecular interactions in mixtures of ionic liquids and water. The OH chemical shifts were found to decrease as the water concentration in the ionic liquid increased, and their rate of change with temperature decreased with water concentration. The CH₂ and CH₃ chemical shifts were found to move downfield with the increase in temperature, and moved further downfield as water concentration was decreased. The interface of experimental data and the results of quantum calculations suggest a significant binding of phosphonium cations to chloride anion and water molecules. As well, the analysis of the data suggests a possible transformation from cationchloride-water configuration at low water concentrations to cation-water-water at higher water concentrations. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users.     

Substitution reactions in ionic liquids. A kinetic study

The rate of the substitution reaction of (R)-3-chloro-3,7-dimethyloctane (1) with either methanol or benzyl alcohol in mixtures containing the ionic liquid [Bmim][N(CF₃SO₂)₂] was monitored using ³⁵Cl NMR spectroscopy. The enantiomeric excess of the product, (S)-3-methoxy-3,7-dimethyloctane (2a), was analyzed using chiral gas chromatography. This product showed a decreasing enantiomeric excess with increasing concentration of ionic liquid. The rate of reaction of substrate 1 in each case varied with the concentration of the ionic liquid. Polarity measurements of the solvent mixtures were undertaken by standard methods, which are compared both to each other and to the observed rates. Solvent reorganization and selective solvation are also each proposed as contributing to the difference in the observed rates of reaction.     

Physicochemical properties and solubility of alkyl-(2-hydroxyethyl)-dimethylammonium bromide

Quaternary ammonium salts, which are precursors of ionic liquids, have been prepared from N,N-dimethylethanolamine as a substrate. The paper includes specific basic characterization of synthesized compounds via the following procedures: nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectra, water content, mass spectroscopy (MS) spectra, temperatures of decompositions, basic thermodynamic properties of pure ionic liquids (the melting point, enthalpy of fusion, enthalpy of solid-solid phase transition, glass transition), and the difference in the solute heat capacity between the liquid and solid at the melting temperature determined by differential scanning calorimetry (DSC). The (solid + liquid) phase equilibria of binary mixtures containing (quaternary ammonium salt + water, or + 1-octanol) has been measured by a dynamic method over wide range of temperatures, from 230 K to 560 K. These data were correlated by means of the UNIQUAC ASM and modified nonrandom two-liquid NRTL1 equations utilizing parameters derived from the (solid + liquid) equilibrium. The partition coefficient of ionic liquid in the 1-octanol/water binary system has been calculated from the solubility results. Experimental partition coefficients (log P) were negative at three temperatures.     

Binary Mixtures of Aprotic and Protic Ionic Liquids Demonstrate Synergistic Polarity Effect: An Unusual Observation

In this communication, we demonstrate the solute–solvent and solvent–solvent interactions in the binary mixtures of two aprotic ionic liquids, namely 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, with the protic ionic liquid 1-methylimidazolium acetate. The synergistic effects as expressed by the solvatochromic parameter are noted. This observation is in contrast to the mixing of protic ionic liquids 1-methylpyrrolidium acetate and 4-methylmorpholine acetate with 1-methylimidazolium acetate, respectively. It appears that the synergistic effects in the binary mixtures of aprotic and protic ionic liquids are caused by the formation of hydrogen bonds, since cations are dominant H-bond donors while anions are dominant H-bond acceptors. Preferential solvation models are used to describe the solute–solvent interactions in the binary ionic liquid mixtures.     

Interaction of water with the model ionic liquid [bmim][BF4]: molecular dynamics simulations and comparison with NMR data

We report on molecular dynamics simulations of the ionic liquid [bmim][BF 4] and its mixtures with water, from zero up to 0.5 mol fraction of water. All of the simulations are carried out with two published force fields. The results are compared with each other and with published as well as new NMR data on the same mixtures, whenever possible. We perform extensive analyses of structural quantities, such as pair correlation functions, nearest-neighbor analysis and size distribution of the water clusters formed at higher concentrations. We show that the water clusters are formed almost exclusively by linear chains of hydrogen-bonded molecules. There is a nanoscale structuring of the mixtures but no macroscopic phase separation among the components, in agreement with experiment. Roughly, we identify two solvation regimes. At low water content, the ions are selectively coordinated by individual water molecules, but their ionic network is largely unperturbed. At high water content, the ionic network is somewhat disrupted or swollen in a nonspecific way by the water clusters.     

Heavy metals adsorption by novel EDTA-modified chitosan-silica hybrid materials

Ionic liquid based microemulsions were characterized by absorption solvatochromic shifts, (1)H NMR and kinetic measurements in order to investigate the properties of the ionic liquid within the restricted geometry provided by microemulsions and the interactions of the ionic liquid with the interface. Experimental results show a significant difference between the interfaces of normal water and the new ionic liquid microemulsions. Absorption solvatochromic shift experiments and kinetic studies on the aminolysis of 4-nitrophenyl laurate by n-decylamine show that the polarity at the interface of the ionic liquid in oil microemulsions (IL/O) is higher than at the interface of water in oil microemulsions (W/O) despite the fact that the polarity of [bmim][BF(4)(-)] is lower than the polarity of water. (1)H NMR experiments showed that an increase in the ionic liquid content of the microemulsion led to an increase in the interaction between [bmim][BF(4)(-)] and TX-100. The reason for the higher polarity of the microemulsions with the ionic liquid can be explained in terms of the incorporation of higher levels of the ionic liquid at the interface of the microemulsions, as compared to water in the traditional systems.     

CO(2) as a separation switch for ionic liquid/organic mixtures

A novel technique to separate ionic liquids from organic compounds is introduced which uses carbon dioxide to induce the formation of an ionic liquid-rich phase and an organic-rich liquid phase in mixtures of methanol and 3-butyl-1-methyl-imidazolium hexafluorophosphate ([C4mim][PF6]). If the temperature is above the critical temperature of CO2 then the methanol-rich phase can become completely miscible with the CO2-rich phase, and this new phase is completely ionic liquid-free. Since CO2 is nonpolar, it is not equipped to solvate ions. As the CO2 dissolves in the methanol/[C4mim][PF6] mixture, the solvent power of the CO2-expanded liquid is significantly reduced, inducing the formation of the second liquid phase that is rich in ionic liquid. This presents a new way to recover products from ionic liquid mixtures and purify organic phases that have been contaminated with ionic liquid. Moreover, these results have important implications for reactions done in CO2/ionic liquid biphasic mixtures.     

Diffusion Measurements To Understand Dynamics and Structuring in Solutions Involving a Homologous Series of Ionic Liquids

The self-diffusion coefficients of each of the components in mixtures containing pyridine and each of the homologous series 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imides in acetonitrile were determined using NMR diffusometry (i. e., Pulsed Gradient Spin Echo). The nature of solvation was found to change significantly with the proportion of salt in the mixtures. Increased diffusion coefficients (when corrected for viscosity) for the molecular components were observed with increasing proportion of ionic liquid and with increasing alkyl chain length on the cation. Comparison of the molecular solvents suggests increased interactions in solution of the pyridine with other components of the mixture, consistent with the proposed interactions shown previously to drive changes in reaction kinetics. Discontinuities were seen in the diffusion data for each species in solution across different ionic liquids between the hexyl and octyl derivatives, suggesting a change in the structuring in solution as the alkyl chain on the cation changes and demonstrating the importance of such when considering homologous series.     

Protic ionic liquids based on the dimeric and oligomeric anions: [(AcO)xH(x-1)]-

We describe a fluidity and conductivity study as a function of composition in N-methylpyrrolidine-acetic acid mixtures. The simple 1 : 1 acid-base mixture appears to form an ionic liquid, but its degree of ionicity is quite low and such liquids are better thought of as poorly dissociated mixtures of acid and base. The composition consisting of 3 moles acetic acid and 1 mole N-methylpyrrolidine is shown to form the highest ionicity mixture in this binary due to the presence of oligomeric anionic species [(AcO)(x)H(x-1)](-) stabilised by hydrogen bonds. These oligomeric species, being weaker bases than the acetate anion, shift the proton transfer equilibrium towards formation of ionic species, thus generating a higher degree of ionicity than is present at the 1 : 1 composition. A Walden plot analysis, thermogravimetric behaviour and proton NMR data, as well as ab initio calculations of the oligomeric species, all support this conclusion.     

Organometallic complexes in supported ionic-liquid phase (SILP) catalysts: a PHIP NMR spectroscopy study

para-Hydrogen induced polarization (PHIP) NMR spectroscopy emerges as an efficient and robust method for on-line monitoring of gas-phase hydrogenation reactions. Here we report detailed investigations of supported ionic liquid phase (SILP) catalysts in a continuous gas-phase hydrogenation of propene with PHIP NMR spectroscopy. A relocation of the rhodium complex in the thin layer of ionic liquid in the SILP catalyst at the initial stage of the propene hydrogenation is demonstrated. PHIP NMR spectroscopy can provide profound insight into the evolution of SILP catalysts during hydrogenation reactions.     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Gutmann donor and acceptor numbers for ionic liquids

We present for the first time Gutmann donor and acceptor numbers for a series of 36 different ionic liquids that include 26 distinct anions. The donor numbers were obtained by (23) Na?NMR spectroscopy and show a strong dependence on the anionic component of the ionic liquid. The donor numbers measured vary from -12.3?kcal?mol(-1) for the ionic liquid containing the weakest coordinative anion [emim][FAP] (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate), which is a weaker donor than 1,2-dichloroethane, to 76.7?kcal?mol(-1) found for the ionic liquid [emim][Br], which exhibits a coordinative strength in the range of tertiary amines. The acceptor numbers were measured by using (31) P?NMR spectroscopy and also vary as a function of the anionic and cationic component of the ionic liquid. The data are presented and correlated with other solvent parameters like the Kamlet-Taft set of parameters, and compared to the donor numbers reported by other groups.