一种在固体基底上制备高度取向氧化锌纳米棒的新方法

采用廉价、低温的方法，在修饰过ZnO纳米粒子膜的ITO基底上成功制备出具有 高长径比、高度取向的ZnO纳米棒阵列，用扫描电子显微镜(SEM)，X射线衍射(XRD) ，高分辨透射电子显微镜(HRTEM)以及拉曼光谱对制备出的ZnO纳米棒的结构和形貌 进行了表征，测试结果表明，ZnO纳米棒是单晶，属于六方晶系，与基底直，上仍 沿(001)晶面择优生长的特征，并且ZnO纳米棒基本上无氧空位的存在，统计结果显 示，水热反应2h后90%以上的ZnO纳米棒直径为120～190nm，长度为4μm     

海藻酸锌纤维热降解法制备氧化锌纳米结构

采用天然高分子海藻酸钠为原料, 以氯化锌水溶液为凝固浴, 通过湿法纺丝技术成功制备了海藻酸锌(Alg-Zn)纤维.通过在空气中不同温度下对所得海藻酸锌纤维进行热处理, 得到了多种ZnO纳米结构. 利用热失重分析(TG)、X射线衍射(XRD)、电子能量损失谱(EELS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段对产物的组成、形貌和微观结构进行了详细表征. 结果表明, 焙烧温度和时间对所得ZnO纳米结构的尺寸和形貌具有重要影响; 800 ℃下热处理24 h以上可以得到直径约为120 nm的ZnO纳米棒. 通过仔细考察不同热处理时间得到的ZnO纳米结构, 提出了在焙烧条件下ZnO纳米棒的生长机理.     

Different morphologies of ZnO nanostructures via polymeric complex sol–gel method: synthesis and characterization

Various morphologies of ZnO nanostructures, such as nanoparticles, nanorods and nanoflowers have been achieved controllably by polymeric sol–gel method. In this approach, zinc nitrate Zn(NO₃)₂·6H₂O, citric acid and ethylene glycol were used as the source of Zn²⁺, the chelating agent and the solvent agent, respectively. The microstructure of the ZnO nanostructures was characterized by X-ray diffractometry, scanning electron microscopy with the energy dispersive X-ray spectroscopy, transmission electron microscopy, thermogravimetric analysis and Fourier transform infrared spectroscopy. The effect of ethylene glycol to citric acid mole ratio on the morphology and structure of the products was discussed. The ZnO nanoparticles with diameter between 24 ± 2 nm was obtained with EG:CA mole ratio equal to 2:1. The optical properties of as-obtained power were investigated by ultraviolet–visible spectroscopy.     

Microwave plasma growth and high spatial resolution cathodoluminescent spectrum of tetrapod ZnO nanostructures

A novel microwave plasma assisted by tube furnace heating system is designed to grow tetrapod ZnO nanostructures. Under optimal reaction conditions, Zn powder is oxidated to form the tetrapod ZnO with straight and uniform four legs (nanorods), bearing diameters ranging from 10 to 25 nm and lengths up to 160 nm. High-resolution transmission electron microscopy analyses reveals that the tetrapod ZnO nanostructures are perfect crystalloid. High spatial resolution cathodoluminescent spectrum for individual tetrapod ZnO nanostructure shows only a strong ultraviolet emission at 385 nm.     

Synthesis and synchrotron light-induced luminescence of ZnO nanostructures: nanowires, nanoneedles, nanoflowers, and tubular whiskers

ZnO nanostructures, including single-crystal nanowires, nanoneedles, nanoflowers, and tubular whiskers, have been fabricated at a modestly low temperature of 550 degrees C via the oxidation of metallic Zn powder without a metal catalyst. Specific ZnO nanostructures can be obtained at a specific temperature zone in the furnace depending on the temperature and the pressure of oxygen. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD) studies show that ZnO nanostructures thus prepared are single crystals with a wurtzite structure. X-ray excited optical luminescence (XEOL) from the ZnO nanostructures show noticeable morphology-dependent luminescence. Specifically, ZnO nanowires of around 15 nm in diameter emit the strongest green light. The morphology of these nanostructures, their XEOL, and the implication of the results will be discussed.     

基底对电沉积制备ZnO纳米棒阵列的影响

采用恒电位电沉积方法, 在未经修饰的ITO导电玻璃基底上通过控制实验条件制备出不同形貌的纳米ZnO结构, 而在经过ZnO纳米粒子膜修饰后的ITO导电玻璃基底上, 制备出透明、高取向、粒径小于30 nm的ZnO纳米棒阵列. 用扫描电子显微镜(SEM)、X射线衍射(XRD)以及透射光谱对制备出的ZnO纳米棒阵列的结构、形貌和透明性进行了表征. 测试结果表明, ZnO纳米棒阵列的平均直径为21 nm, 粒径分布窄, 约18～25 nm, 择优生长取向为[001]方向, 垂直于基底生长. 当入射光波长大于400 nm时, ZnO纳米棒阵列的透光率大于95%.     

Electrochemical synthesis of ZnO nanorods/porous silicon composites and their gas-sensing properties at room temperature

The zinc oxide (ZnO) nanorods with different aspect ratio (length/diameter) were grown directly on the porous silicon (PS) substrate through electrochemical synthesis. The obtained ZnO nanorods/PS products were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and gas-sensing test. Comparative study shows that the addition of nonionic polymer polyvinylpyrrolidone (PVP) into oxygenated zinc chloride electrolyte can modulate the crystal growth and the aspect ratio of ZnO nanorods from electrodeposition, thus, influence the gas-sensing properties of ZnO nanorods/PS composites. With appropriate amount of PVP in the electrolyte, the product possessing high-density and large aspect ratio ZnO nanorods has an obvious improvement of the NO₂-sensing performances with high sensitivity, fast response-recovery characteristic, and good repeatability and selectivity. The gas-sensing mechanism was discussed in the paper. The result indicated that the heterojunction effect of ZnO nanorods and PS may be responsible for the excellent gas-sensing properties.     

氧化锌纳米棒的水热合成及其光催化性能

以分析纯ZnO作为锌源、NaOH为矿化剂、盐酸为反应溶液pH调节剂,利用水热反应制备了花状ZnO纳米棒;采用扫描电子显微镜和X射线衍射仪分析了产物的形貌和结构,考察了水热温度以及Zn2+和OH-浓度比对产物形貌的影响;以甲基橙为目标降解物,采用紫外-可见分光光度计研究了ZnO纳米棒的光催化性能.结果表明,在水热反应温度80℃、Zn2+/OH-浓度比1∶7.5条件下所得ZnO纳米棒呈花状聚合,直径约为200nm,长度约为2μm,具有六方纤锌矿结构.当甲基橙初始浓度为30 mg.L-1、ZnO纳米棒的投放量为1.5g.L-1时,以300W紫外灯照射150min,甲基橙的降解率可达90%.     

化学溶液沉积法制备单分散氧化锌纳米棒阵列

在由溶胶凝胶法制备的纳米ZnO薄膜基底上, 采用化学溶液沉积法制备了单分散、高度取向的ZnO纳米棒阵列膜. 通过控制纳米ZnO薄膜的制备工艺, 可以调节氧化锌纳米棒的直径. 利用FESEM, TEM, HRTEM, SAED和XRD表征了氧化锌纳米棒阵列的形貌和晶体结构. ZnO纳米棒的室温PL谱具有很高的紫外带边发射峰, 在可见光波段无发射峰, 表明该方法制备的ZnO纳米棒晶体结构完整, 晶体中O空位的浓度很低.     

Fast synthesis of ZnO nanostructures by laser-induced decomposition of zinc acetylacetonate

A CO2 laser (lambda = 10.6 microm) was used to heat a solution of water and alcohol saturated by Zn(AcAc)2 on a fused quartz substrate in open air. After only a few seconds of irradiation, various zinc oxide (ZnO) nanostructures including nanorods and nanowires are formed near the center of the irradiated zone, surrounded by a porous thin film of ZnO nanoparticles. The type of structures produced and their localization on the substrate can be varied by selecting adequate irradiation time and laser power ranges. The deposits have been analyzed using SEM, TEM, EDS, XRD, and Raman spectroscopy, revealing that the nanorods (aspect ratio ~6) and nanowires (aspect ratio ~94) are single-crystalline structures which grow along the c axis of wurtzite ZnO. The nanoparticles are also single-crystalline and have an average diameter of 16 nm. A qualitative model for nanostructure growth is proposed, based on previous studies of aqueous solution and hydrothermal processing.     

微波诱导燃烧法合成类花状ZnO纳米材料及其晶体结构、荧光性质研究

以硝酸锌[Zn(NO3)2.6H2O]和尿素[CO(NH2)2]作前驱体,通过微波诱导燃烧技术可控合成具有不同形貌的ZnO纳米晶体,并用热重分析和差热分析进行了研究。对各种生长条件:微波功率,辐射时间和尿素/Zn2+物质的量的比对ZnO纳米晶体形貌的影响作了分析。结果表明:尿素/Zn2+物质的量的比对ZnO纳米材料的形貌具有显著影响。X衍射图表明合成的ZnO纳米结构呈六角形。傅里叶变换红外光谱图中400~500 cm-1处明显的峰为Zn-O的振动峰。ZnO纳米结构的发光光谱在366 nm的带边发射,因缺陷又由许多可见光发射峰组成。用扫描电子显微镜、透射电子显微镜、选区电子衍射研究了花状ZnO纳米结构的增长机理。本方法仅需几分钟就获得的了ZnO纳米结构。     

Room temperature solution synthesis of monodispersed single-crystalline ZnO nanorods and derived hierarchical nanostructures

In this work, we report a room temperature wet-chemical approach to synthesize highly regulated, monodispersed ZnO nanorods and derived hierarchical nanostructures. In particular, ZnO has been prepared into single-crystalline conical or prismatic nanorods, and various hierarchical structures such as hexagonally branched, reversed umbrella-type, and cactus-like ZnO nanostructures comprising individual c-oriented nanorods. Depending on the synthetic conditions used, the diameter of nanorods can be controlled with a size down to 10-30 nm, while the aspect ratio can be controlled up to 50-100. Various preparative parameters, such as initial reactant concentrations, solvents, ligands, surfactants, precursor salts, and reaction time, have been systematically examined. Due to slow reactions at room temperature, excellent crystallinity and high morphological yield (100% in most cases) have been achieved via tuning the synthetic parameters. Our photoluminescence and UV measurements also confirm the attained crystal perfection and size uniformity.     

Spectroscopic characterization of zinc oxide nanorods synthesized by solid-state reaction

Well-crystallized zinc oxide nanorods have been fabricated by single step solid-state reaction using zinc acetate and sodium hydroxide, at room temperature. The sodium lauryl sulfate (SLS) stabilized zinc oxide nanorods were characterized by using X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. The X-ray diffraction revealed the wurtzite structure of zinc oxide. The size estimation by XRD and TEM confirmed that the ZnO nanorods are made of single crystals. The growth of zinc oxide crystals into rod shape was found to be closely related to its hexagonal nature. The mass ratio of SLS:ZnO in the nanorods was found to be 1:10 based on the thermogravimetric analysis. Blue shift of photoluminescence emission was noticed in the ZnO nanorods when compared to that of ZnO bulk. FT-IR analysis confirmed the binding of SLS with ZnO nanorods. Apart from ease of preparation, this method has the advantage of eco-friendliness since the solvent and other harmful chemicals were eliminated in the synthesis protocol.     

Time growing comparison for ZnO nanorod by using microwave irradiation method

In this study, zinc oxide (ZnO) nanorod were successfully prepared at different growth times (15, 30 and 60 min) using the microwave irradiation method. The ZnO nanorods were simply synthesized at a low temperature (90 °C) with low power microwave assisted heating (about 100 W) and a subsequent ageing process. The synthesized nanorod were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and Ultraviolet–Visible spectroscopy (UV–Vis). The FESEM images showed nanorods with diameter ranging between 50 and 150 nm, and length of 150–550 nm. The XRD results indicate that ZnO nanorods of different time of growth exhibits pure wurtzite structure with lattice parameters of 3.2568 and 5.2125 Å. UV–Vis characterization showed that energy gap decreases with increase in time. The result also shows that growth of ZnO at 60 min produces an energy band gap of 3.15 eV. In general, the results of the study confirm that the microwave irradiation method is a promising low temperature, cheap and fast method for the production of ZnO nanostructures.     

ZnO nanorods on ZnO seed layer derived by sol–gel process

Well-aligned ZnO nanorods are obtained by a liquid phase epitaxial growth on the indium-doped tin oxide glass deposited with a ZnO thin film as the seed layer, which is prepared by combining a sol–gel process and a spin coating technique. The effects of water content in the sol and heat treatment temperature on the properties of the ZnO thin film are investigated. Relationship among the seed layer, the growing time, the growing temperature, the concentration of Zn²⁺ in the solution, the anions in the solution and the resulting ZnO nanorods are discussed in detail. X-ray diffraction analysis and scanning electronic microscopy are employed to characterize the structural and morphological properties of the resulting ZnO nanorods. Results indicate that the ZnO nanorods with a preferred orientation show a single crystal with a wurtzite structure in the direction of [0001], the diameter of the ZnO nanorods seems to depend on the size of the seed grain, while the length of the ZnO nanorods is determined by the growing time and the growing temperature.     

以卵磷脂为手性添加剂制备手性介孔二氧化硅

以十六烷基三甲基溴化铵(CTAB)的自组装体为模板,卵磷脂(PC)为手性添加剂,在n_PC:n_CTAB=1:21时,通过溶胶-凝胶法制备了螺旋介孔二氧化硅纳米棒。利用扫描电镜(FESEM)、透射电镜(TEM)、X-射线衍射以及氮气吸附-脱附等测试手段,对该纳米棒的形貌以及孔结构进行了表征。TEM显示该纳米棒的长度约为50~200nm,直径约为30~50nm。X-射线衍射表明孔道呈二维六方排列,虽然FESEM显示纳米棒左右手比例约为1:1,但通过圆二色谱表征证明该纳米棒在埃尺度下倾向于形成单一手性。结果表明,卵磷脂的手性可以传递到螺旋介孔二氧化硅纳米棒中。     

以卵磷脂为手性添加剂制备手性介孔二氧化硅

以十六烷基三甲基溴化铵(CTAB)的自组装体为模板,卵磷脂(PC)为手性添加剂,在n PC∶nCTAB=1∶21时,通过溶胶-凝胶法制备了螺旋介孔二氧化硅纳米棒。利用扫描电镜(FESEM)、透射电镜(TEM)、X-射线衍射以及氮气吸附-脱附等测试手段,对该纳米棒的形貌以及孔结构进行了表征。TEM显示该纳米棒的长度约为50～200 nm,直径约为30～50 nm。X-射线衍射表明孔道呈二维六方排列,虽然FESEM显示纳米棒左右手比例约为1∶1,但通过圆二色谱表征证明该纳米棒在埃尺度下倾向于形成单一手性。结果表明,卵磷脂的手性可以传递到螺旋介孔二氧化硅纳米棒中。     

Improved performance of dye sensitized ZnO nanorod solar cells prepared using TiO2 seed layer

Zinc oxide (ZnO) nanorods of different structures have been grown on indium-doped tin oxide substrates by using TiO₂ as seed layer. The ZnO nanorods have been prepared using TiO₂ seed layers annealed at different temperatures via a simple sol–gel method. The X-ray diffraction result indicates that the prepared samples are of wurtzite structure. Dye sensitized solar cells have been fabricated using the prepared ZnO nanorods. The open circuit voltage, short circuit current density, fill factor, and power conversion efficiency of the ZnO nanorod based dye sensitized solar cells prepared using TiO₂ seed layers annealed at different temperatures have been determined. The improvement in power conversion efficiency may be due to the flower like structured ZnO nanorods with smaller diameter and large specific surface area which paves way for the efficient electron transfer in hybrid solar cells.     

Various shaped-ZnO nanocrystals via low temperature synthetic methods: Surfactant and pH dependence

ZnO nanocrystals, rod-, carnation-, and flower-like structures, have been synthesized in a high yield through low-temperature synthetic methods. Well-aligned ZnO nanorods having hexagonal wurtzite structure were grown on the ZnO thin films assembled by a spin-coating method. The morphologies of ZnO seed films are affected by pHs of sol–gel solutions, resulting smaller sizes and homogeneous roughness at higher pHs and higher number of spin-coating times. The carnation-like structures, average size of about 2–3 μm, were assembled by tens of uniform ZnO nanosheet petals of ∼50 nm in thickness when a different volume ratio of the precursory solution was used. ZnO nanocrystals on the facets of the compact ZnO nanorods have grown to linear nanorods having an average diameter of ∼500 nm and length of ∼2 μm. Furthermore, a noticeable difference in the growth of ZnO nanocrystals in the presence of various surfactants, polyvinylpyrrolidone, polyvinylsulphonic acid, and polyethyleneimine, has been observed and discussed.     

Synthesis of ZnO nanorods and their application in quantum dot sensitized solar cells

ZnO nanorod thin films of different thicknesses and CdS quantum dots have been prepared by chemical method. X-ray diffraction pattern reveals that the CdS quantum dot and ZnO nanorods are of hexagonal structure. Field emission scanning electron microscope images show that the diameter of hexagonal shaped ZnO nanorods ranges from 110 to 200 nm and the length of the nanorod vary from 1.3 to 4.7 μm. CdS quantum dots with average size of 4 nm have been deposited onto ZnO nanorod surface using successive ionic layer adsorption and reaction method and the assembly of CdS quantum dot with ZnO nanorod has been used as photo-electrode in quantum dot sensitized solar cells. The efficiency of the fabricated CdS quantum dot-sensitized ZnO nanorod-based solar cell is 1.10 % and is the best efficiency reported so far for this type of solar cells.