Observation of sodium gel-induced protein modifications in dodecylsulfate polyacrylamide gel electrophoresis and its implications for accurate molecular weight determination of gel-separated proteins by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectrometry (TOFMS) can potentially provide accurate molecular weight information of proteins separated by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). Several issues related to resolution and accuracy of molecular weight measurement are investigated by using a time-lag focusing MALDI-TOF mass spectrometer. The effects of the gel components SDS, glycerol, and tris buffer on the mass spectral signals are studied systematically. Glycerol and tris buffer are shown to have little or no effect on resolution and mass accuracy, whereas SDS degrades sensitivity, resolution, and mass accuracy even at low concentrations. A simple and fast gel extraction technique is presented which is capable of detecting proteins loaded at the low-picomole level on the gel. The sample preparation procedure used in this work appears to remove most of SDS from the gel, thereby reducing the peak broadening effect caused by SDS and resulting in high resolution and accurate measurement of proteins. However, for proteins containing cysteines, the molecular ions are composed of a distribution of acrylamide-protein adducts likely formed by reaction with unpolymerized acrylamide in the gel during the gel separation process. The implications of gel-induced protein modifications on the accurate molecular weight measurement of gel-separated proteins are discussed.     

Separation of proteins by consecutive sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and reversed phase high performance liquid chromatography

A procedure for the preparative separation of proteins was developed by using consecutively sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (SDS-PAGE) and reversed phase high performance liquid chromatography (HPLC). The proteins were separated by SDS-PAGE and afterwards extracted from the gel. The extracted proteins were separated from SDS and other small molecular weight contaminants on a Fractogel TSK HW-40 (F) column in acidic aqueous acetonitrile. The proteins eluted from the Fractogel column were fractionated by HPLC. The identity and purity of the recovered proteins was confirmed by SDS-PAGE analysis.     

Modification of the immobilized metal affinity electrophoresis using sodium dodecyl sulfate polyacrylamide gel electrophoresis

Modification to the original immobilized metal affinity electrophoresis (IMAEP) technique is presented. SDS-PAGE is used instead of native PAGE for improved extraction of phosphoproteins from a mixture of proteins. Protein samples treated with 2% w/v SDS instead of native sample buffer ensure that proteins are negatively charged. These negative charges on the proteins assure that the proteins migrate electrophoretically towards the anode regardless of their pI values and hence pass through the region embedded with the metal ions. Another benefit of treating proteins with SDS is that it unfolds the phosphoproteins exposing the phosphate groups to facilitate the metal-phosphate interactions. Phosphorylated ovalbumin can only be extracted after SDS sample buffer treatment. Data show that there is no detrimental effect upon SDS treatment on the extraction of phosphoproteins from a mixture of proteins. Electrophoretic migration of phosphoproteins ceases upon encounter with metal ions like Al+3, Ti+3, Fe+3, Fe+2, and Mn+2 whereas non-phosphorylated proteins migrate freely.     

High-performance hydroxyapatite chromatography of integral membrane proteins and water-soluble proteins in complex with sodium dodecyl sulphate.

Integral membrane proteins from human erythrocytes were fractionated in the presence of sodium dodecyl sulphate (SDS) on four types of high-performance hydroxyapatite columns. A column of 2-microns sintered hydroxyapatite beads from Asahi Optical (Tokyo, Japan) gave the best resolution. With this column, glycophorin was eluted early in a gradient of increasing sodium phosphate buffer concentration, the glucose transporter was eluted later in two zones, one of which contained this protein alone, and the anion transporter was eluted last. Water-soluble proteins applied in complex with SDS also separated reasonably well upon elution. The water-soluble proteins and the membrane proteins were all eluted mainly in the order of increasing polypeptide length, but with considerable individual variation. SDS-polypeptide complexes are probably adsorbed onto hydroxyapatite by the interaction of positively charged amino acid side groups with phosphate ions (at P-sites) and of negatively charged amino acid side groups and polypeptide-bound dodecyl sulphate anions with calcium ions (at C-sites). As a rule, the number of charged side groups and dodecyl sulphate anions, and thus the number of binding sites, increases with the polypeptide chain length, which explains the general order of release of the polypeptides.     

Interaction of Diphenylamine Diazonium Salt with Sodium Dodecyl Sulfate in Aqueous Solution

The interaction of diphenylamine-4-diazonium salt (DDS) with sodium dodecyl sulfate (SDS) in aqueous solution was investigated. The results show that in a 2.1-2.3 molar ratio of SDS/DDS, the solution viscosity increases suddenly to a thousand times the original and then drops rapidly as the ratio beyond the region. The dramatic increase in the viscosity was proposed to be due to aggregated micelles that form in solution due to the interaction of diphenylamine diazonium salt and micelles formed from SDS, and when further SDS was added drops rapidly, because the aggregated micelles were separated by the electrostatic repulsion force originated from the overfeeding of SDS. It is interesting that the viscosity of the solution is very susceptible to UV light, i.e., the increased viscosity decreases gradually when the solution was exposed under UV light because the irradiation decomposes the diazonium group. The influence of [SDS] and the ratio of SDS/DDS on the viscosity of the solution were also investigated. Copyright 1999 Academic Press.     

Influence of Ionic Strength, pH, and SDS Concentration on Subunit Analysis of Phycoerythrins by SDS-PAGE

Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) is often used for subunit analysis of proteins, but it is not efficient to make the α- and β-subunits of phycoerythrins separated by normal SDS-PAGE. In this research, subunit components and subunit molecular weights of four purified phycoerythrins were analyzed by SDS-PAGE. Four factors including Tris concentration, pH, ammonium persulfate (APS), and SDS concentration were studied for their effects on SDS-PAGE of phycoerythrins. It showed that these factors can influence the separation of α- and β-subunits, electrophoresis effect of γ-subunits, apparent molecular weights of subunits, and mobility of marker proteins. The α- and β-subunits separated better in the case of lower SDS concentration, lower Tris concentration, higher pH, and/or lower APS addition in separating gels. The molecular weights of α- and β-subunits increased when Tris concentration increased in a certain range. It can be concluded that factors critical to subunit analysis by SDS-PAGE are SDS concentration and ionic strength, both of which are related to critical micelle concentration of SDS and ratio of SDS monomer to micelle in SDS-PAGE system. The ratio is postulated to influence SDS-PAGE by influencing the amount of SDS bound to polypeptides and shapes of polypeptide–SDS complexes.     

Studies on the separation of hydronium ion using surfactant-modified reversed-phase stationary phases and eluents containing an acidified electrolyte

A further investigation of a chromatographic system allowing determination of hydrogen ions is reported. For this purpose an octadecylsilica column dynamically modified with sodium dodecylsulfate (SDS) or lithium dodecylsulfate (LDS) was used as stationary phase and a slightly acidified electrolyte (usually KCl)-SDS solution was used as the eluent. The concentration of SDS, KCl and the acidity of the eluent affected the structure of aggregates formed by the molecules of dodecylsulfate at the surface of the stationary phase. These aggregates of dodecylsulfate were found to be responsible for the appearance of a chromatographic peak attributed to the presence of H3O+ ions in a sample. Other cations in the sample could be separated in the same manner, permitting the simultaneous separation of monovalent cations from H3O+. The detection limit for H3O+ ions was 2.25 x 10(-6) M using an eluent comprising 0.3 mM LDS, 50.0 mM KCl and 0.10 mM H2SO4. The proposed method is shown to be applicable for the determination of free H3O+ ions in aqueous solutions of strong acids.     

Improved disc SDS‐PAGE for extraction of low molecular weight proteins from serum

The low molecular weight proteins can provide a lot of valuable information of biomarkers. To study these proteins, the high abundance and high molecular weight proteins must be removed prior to analysis. In this work, a simple and inexpensive disc SDS‐PAGE to extract low molecular weight proteins from human serum and cutoff proteins larger than 30 kDa was developed. Some experimental conditions were examined. The experimental results obtained by plate SDS‐PAGE and MALDI‐TOF MS showed that the molecular weight of extracted proteins was about in the range from 0.3 to 28 kDa. Some experiments, including precipitation of proteins in organic solvents, SPE and cytochrome C test, were carried out and the experimental results demonstrated successful recovery of proteins/peptides with molecular weight from several hundreds of dalton to about 30 kDa. The experimental results obtained by plate SDS‐PAGE indicated the repeatability was satisfactory.     

In‐gel equilibration for improved protein retention in 2DE‐based proteomic workflows

The 2DE is a powerful proteomic technique, with excellent protein separation capabilities where intact proteins are spatially separated by pI and molecular weight. 2DE is commonly used in conjunction with MS to identify proteins of interest. Current 2DE workflow requires several manual processing steps that can lead to experimental variability and sample loss. One such step is the transition between first dimension IEF and second‐dimension SDS‐PAGE, which requires exchanging denaturants and the reduction and alkylation of proteins. This in‐solution‐based equilibration step has been shown to be rather inefficient, losing up to 30% of the original starting material through diffusion effects. We have developed a refinement of this equilibration step using agarose stacking gels poured on top of the second‐dimension SDS‐PAGE gel, referred to as in‐gel equilibration. We show that in‐gel equilibration is effective at reduction and alkylation in SDS‐PAGE gels. Quantification of whole‐cell extracts separated on 2DE gels shows that in‐gel equilibration increases protein retention, decreased intergel variability, and simplifies 2DE workflow.     

Acid-labile surfactant improves in-sodium dodecyl sulfate polyacrylamide gel protein digestion for matrix-assisted laser desorption/ionization mass spectrometric peptide mapping

Mass spectrometry (MS) together with genome database searches serves as a powerful tool for the identification of proteins. In proteome analysis, mixtures of cellular proteins are usually separated by sodium dodecyl sulfate (SDS) polyacrylamide gel-based two-dimensional gel electrophoresis (2-DE) or one-dimensional gel electrophoresis (1-DE), and in-gel digested by a specific protease. In-gel protein digestion is one of the critical steps for sensitive protein identification by these procedures. Efficient protein digestion is required for obtaining peptide peaks necessary for protein identification by MS. This paper reports a remarkable improvement of protein digestion in SDS polyacrylamide gels using an acid-labile surfactant, sodium 3-[(2-methyl-2-undecyl-1,3-dioxolan-4-yl)methoxy]-1-propanesulfonate (ALS). Pretreatment of gel pieces containing protein spots separated by 2-DE with a small amount of ALS prior to trypsin digestion led to increases in the digested peptides eluted from the gels. Consistently, treatment of gel pieces containing silver-stained standard proteins and those separated from tissue extracts resulted in the detection of increased numbers of peptide peaks in spectra obtained by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS). Hence the present protocol with ALS provides a useful strategy for sensitive protein identification by MS.     

Biochemical dissection of the mitochondrial proteome from Arabidopsis thaliana by three-dimensional gel electrophoresis

We report a subdivision of the mitochondrial proteome into defined sets of proteins, which is based on the combination of three different gel electrophoresis procedures. First, Blue-native polyacrylamide gel electrophoresis is employed to separate mitochondrial protein complexes. The protein complexes are electroeluted and completely detached from Coomasssie blue. Subsequently the subunits of the protein complexes are separated by isoelectric focusing and finally by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. The resolution capacity of the procedure is demonstrated for the ATP synthase complex, the cytochrome c reductase complex and the preprotein translocase of the outer mitochondrial membrane (the TOM complex). The method allows the separation of isoforms of subunits forming part of protein complexes, whose occurrence seems to be rather a rule than an exception in higher eukaryotes. Furthermore, extremely hydrophobic proteins are detectable on the gels.     

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous,low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.     

High yield electroblotting onto polyvinylidene difluoride membranes from polyacrylamide gels.

Optimal conditions of electroblotting that led to high protein recovery on polyvinylidene difluoride (PVDF) membranes were determined for sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). SDS concentrations in the gel and transfer buffer were found to be the most important factors affecting the amount of protein recovered on the PVDF membrane. The largest loss occurred during the first 10-30 min of transfer due to the relatively high initial SDS concentration in the gel. During this initial stage of transfer, most of the protein passed through the primary membrane and was partially retained on secondary and tertiary membranes. The value of presoaking gels prior to transfer to reduce the amount of SDS was evaluated by quantitating free SDS densitometrically and by correlating the reduced SDS concentration with increased electroblotting efficiency from presoaked gels. Transfer time was evaluated and no "overtransfer" was found even after very long transfer times. These results clearly indicate that proteins electroblotted onto PVDF membranes were tightly bound and could not be released by extending the transfer time. The effects of methanol and SDS concentrations on protein adsorption from solution to PVDF were also determined quantitatively. The results of this study strongly suggest that proteins fully saturated with SDS cannot bind efficiently to PVDF membranes. Since SDS is necessary for high protein mobility, the challenge in efficient electroblotting is to maintain an optimal SDS concentration which is high enough to permit effective removal from the gel and low enough to permit effective binding to the PVDF membrane. For 1.5 mm thick gels containing 0.2% SDS, presoaking the gel for 15-20 min in transfer buffer with 10% methanol prior to electroblotting provided the best recovery on the primary membrane.     

Addition of urea and thiourea to electrophoresis sample buffer improves efficiency of protein extraction from TCA/acetone‐treated smooth muscle tissues for phos‐tag SDS‐PAGE

Phosphorylation analysis by using phos‐tag technique has been reported to be suitable for highly sensitive quantification of smooth muscle myosin regulatory light chain (LC₂₀) phosphorylation. However, there is another factor that will affect the sensitivity of phosphorylation analysis, that is, protein extraction. Here, we optimized the conditions for total protein extraction out of trichloroacetic acid (TCA)‐fixed tissues. Standard SDS sample buffer extracted less LC₂₀, actin and myosin phosphatase targeting subunit 1 (MYPT1) from TCA/acetone treated ciliary muscle strips. On the other hand, sample buffer containing urea and thiourea in addition to lithium dodecyl sulfate (LDS) or SDS extracted those proteins more efficiently, and thus increased the detection sensitivity up to 4–5 fold. Phos‐tag SDS‐PAGE separated dephosphorylated and phosphorylated LC₂₀s extracted in LDS/urea/thiourea sample buffer to the same extent as those in standard SDS buffer. We have concluded that LDS (or SDS) /urea/thiourea sample buffer is suitable for highly sensitive phosphorylation analysis in smooth muscle, especially when it is treated with TCA/acetone.     

Proteomics Analysis of T Lymphocytes Damage Induced by Ionizing Irradiation

Human T lymphocytes were found to be highly radiosensitive and complex cellular responses including apoptosis could be induced upon exposure to X‐ray irradiation. However, the mechanism of apoptosis associated with irradiation was not clear. In this study, a proteomic method was applied to investigation on alteration of proteome of human T‐lymphocyte cells after irradiation. The Jurkat cells were irradiated with 4 Gy X‐ray and the cell lysates were collected at different times after irradiation (6, 12, 18, 24 and 48 h). The whole proteins were separated and quantified by two‐dimensional fluorescence difference gel electrophoresis, and then the differentially expressed proteins were identified by mass spectrometry. 4 proteins exhibited significant irradiation‐induced difference in abundance, including L‐plastin, bifunctional purine biosynthesis protein, tubulin beta chain, beta‐actin. Differentially expressed proteins were reported to be directly or indirectly involved in the function of human T lymphocyte. Thus, this study might provide clues to identify proteins with biological significance related to irradiation.     

Capillary sodium dodecyl sulfate-DALT electrophoresis with laser-induced fluorescence detection for size-based analysis of proteins in human colon cancer cells

Capillary sodium dodecyl sulfate (SDS)-DALT electrophoresis (SDS-DALT-CE) refers to CE separation of proteins based on their size; DALT is the abbreviation for Dalton, the unit used to describe molecular weight. In this work, seven proteins from 18 to 116 kDa were denatured by SDS, labeled by 3-(2-furoyl) quinoline-2-carboxaldehyde, separated by SDS-DALT-CE in polyethylene oxide sieving matrix, and detected by laser-induced fluorescence (LIF) in a sheath flow cuvette. This method was combined with detergent differential fractionation, which is a protein fractionation method using a series of detergent-containing buffers to sequentially extract protein fractions from cells, to analyze the proteins in HT29 human colon adenocarcinoma cells. In addition, on-column labeling was demonstrated for protein analysis by SDS-DALT-CE with LIF, and applied to analysis of proteins in a single HT29 cancer cell. Most proteins had molecular masses from 10 to 120 kDa. Similar protein profiles were obtained for single cells and protein extract of a large cell population.     

Sequencing of oligosaccharides derivatized with benzylamine using electrospray ionization-quadrupole time of flight-tandem mass spectrometry

Oligosaccharides were derivatized by reductive amination using benzylamine and analyzed by nanoelectrospray ionization-quadrupole time of flight-tandem mass spectrometry (nanoESI-QTOF-MS/MS) in the positive ion mode. The major signals were obtained under these conditions from the [M+H]+ ions for all benzylamine-derivatized oligosaccharides. To obtain structural information from these derivatized oligosaccharides, MS/MS was applied. Protonated molecular ions underwent extensive fragmentation, even under low-energy collision-induced dissociation. MS/MS spectra of [M+H]+ ions are characterized by simple fragmentation patterns which result from cleavage of the glycosidic bonds and thus allow a straightforward interpretation. Fragmentation of the [M+H]+ ions gave predominantly B- and Y-type glycosidic fragments. A systematic study of various oligosaccharides showed that information on sugar sequence and branching could easily be obtained. Predictable and reproducible fragmentation patterns could be obtained in all cases. This derivatization procedure and mass spectrometric methodology were applied successfully to neutral and acidic glycans released from 10 microg of glycoproteins separated by gel electrophoresis. Moreover, the derivatives retain their sensitivity to exoglycosidases. Thus a series of sequential on-target exoglycosidase treatments combined with matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) was found to be useful for the determination of structural features of the glycans released from proteins separated by gel electrophoresis such as the monosaccharide sequence, branching pattern, and anomeric configurations of the corresponding glycosidic linkages. Our strategy can be used successfully to assign the major glycans released from proteins separated by gel electrophoresis.     

Removal of sodium dodecyl sulfate from protein samples prior to matrix-assisted laser desorption/ionization mass spectrometry

Sodium dodecyl sulfate (SDS) is widely used for protein solubilization and for separation of proteins by SDS polyacrylamide gel electrophoresis (SDS-PAGE). However, SDS interferes with other techniques used for characterization of proteins, such as mass spectrometry (MS) and amino acid sequencing. In this paper, we have compared three procedures to remove SDS from proteins, including chloroform/methanol/water extraction (C/M/W), cold acetone extraction and desalting columns, in order to find a rapid and reproducible procedure that provides sufficient reduction of SDS and high recovery rates for proteins prior to matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). A 1000-fold reduction of SDS concentration and a protein recovery at approximately 50% were obtained with the C/M/W procedure. The cold acetone procedure gave a 100-fold reduction of SDS and a protein recovery of approximately 80%. By using desalting columns, the removal of SDS was 100-fold, with a protein recovery of nearly 50%. Both the C/M/W and the cold acetone methods provided sufficient reduction of SDS, high recovery rates of protein and allowed the acquisition of MALDI spectra. The use of n-octyl-beta-D-glucopyranoside in the protein sample preparation enhanced the MALDI signal for protein samples containing more than 2 10(-4)% SDS, after the C/M/W extraction. Following the cold acetone procedure, the use of n-octylglucoside was found to be necessary in order to obtain spectra, but they were of lower quality than those obtained with the C/M/W method, probably due to higher residual amounts of SDS.     

Direct serum injection in micellar liquid chromatography. Recovery of serum proteins and assay of hydrophilic drugs

The recovery of serum proteins from reversed-phase and internal-surface reversed-phase (ISRP) silica supports following direct serum injection was investigated using an eluent containing a micellar solution of sodium dodecyl sulphate (SDS). The results indicated that the recoveries of serum proteins were 98-103% for both supports. On the basis of the above findings, the separation and recovery of hydrophilic drugs (cephalosporins and salicylic acid) from human serum were investigated using acidic eluents including micellar solutions of SDS. They were completely separated from the components of serum, and the recoveries were 94-98% despite protein binding. Although the recommended eluent pH range is 6.0-7.5 for the ISRP support, eluents of pH 2-8 can be used with the micellar chromatographic system.     

Identification of proteins from membrane preparations by a combination of MALDI TOF-TOF and LC-coupled linear ion trap MS analysis of an Antarctic bacterium Pseudomonas syringae Lz4W, a strain with unsequenced genome

Multidimensional protein identification technology helps in identifying a large number of proteins with ESI by sequencing several peptides with MS/MS methods. When ionization and separation of different hydrophobic and hydrophilic peptides in a single process are difficult, a combination of LC-coupled linear ion trap MS and MALDI TOF/TOF can be used for identification of proteins as shown in the present study. We have used this combinational approach to identify membrane proteins of the Antarctic bacterium Pseudomonas syringae Lz4W, which are separated by SDS gel electrophoresis. Although the genome of P. syringae Lz4W has not been sequenced, the known genome sequences of mesophilic Pseudomonas species have been used for the identification of the proteins. Broadly, many membrane proteins, proteins with a wide range of molecular weight and pI including some integral membrane proteins could be identified using this procedure. Some of the identified proteins are involved in low temperature adaptation.