Residue depletion of albendazole and its metabolites in the muscle tissue of large mouth and hybrid striped bass after oral administration

The residue depletion profiles of albendazole (ABZ) and its major metabolites: albendazole sulfoxide (ABZ-SO), albendazole sulfone (ABZ-SO₂) and albendazole aminosulfone (ABZ-2-NH₂SO₂) were studied in the muscle tissues of large mouth (LMB) and hybrid striped bass (HSB). A single oral dose of 10 mg/kg albendazole was given to the two fish species via intra-gastric tube. The muscle tissues with adhering skin were collected at 8, 16, 24, 48, 72, 96 and 120 h post dose from both species. The samples were homogenized in dry ice and subjected to extraction and cleanup procedures. The final sample extracts were analyzed by high performance liquid chromatography. The results indicate that both ABZ and its pharmacologically active metabolite ABZ-SO were retained longer in LMB than in HSB after oral treatment. Albendazole was detectable until 8 h or 6.7 degree days (°D) and 48 h (40 °D) in HSB and LMB, respectively. However, ABZ-SO was detectable up to 48 h (40 °D) and 96 h (80 °D) in HSB and LMB, respectively. Among the inactive metabolites, ABZ-SO₂ was present in both fish species; however, ABZ-2-NH₂SO₂ was detected only in LMB.     

Development of a method to determine albendazole and its metabolites in the muscle tissue of yellow perch using high-performance liquid chromatography with fluorescence detection

An HPLC method was developed for the determination of albendazole (ABZ) and its metabolites, a sulfoxide (ABZSO), a sulfone (ABZSO2), and albendazole-2-aminosulfone (ABZ-2-NH2SO2), from yellow perch muscle tissue with adhering skin. The muscle tissue samples were made alkaline with potassium carbonate and extracted with ethyl acetate, followed by a series of liquid-liquid extraction steps. After solvent evaporation, the residue was reconstituted in the initial mobile phase combination of the gradient. The mobile phase consisted of a buffer, 50 mM ammonium acetate (pH = 4.0) in 10% methanol-water, and 100% acetonitrile. The gradient was from 20% acetonitrile to 85% acetonitrile. The analytes were chromatographed on an RP Luna C18(2) column and detected by fluorescence with excitation and emission wavelengths of 290 and 330 nm, respectively. The average recoveries from fortified muscle tissue for ABZ (20-100 ppb), ABZ-SO (20-200 ppb), ABZSO2 (8-100 ppb), and ABZ-2-NH2SO2 (20-100 ppb) were 85, 95, 101, and 86%, respectively, with corresponding CV values of 9, 3, 6, and 4%, respectively. Their LOQ values were 10, 10, 1, and 10 ppb, respectively. The procedure was applied to determine ABZ and its major metabolites in the incurred muscle tissue of yellow perch obtained after orally dosing the fish with ABZ.     

超高效液相色谱-串联质谱法测定草鱼肉中阿苯达唑及其代谢物残留

建立了同时测定草鱼肉中阿苯达唑及其3种代谢物阿苯达唑亚砜、阿苯达唑砜、阿苯达唑-2-氨基砜的超高效液相色谱-串联质谱(UPLC-MS/MS)分析方法。草鱼肉样品通过碱性乙酸乙酯提取,正己烷净化,超高效液相色谱分离,串联质谱检测,氘代同位素内标定量。本方法分析时间短,在4 min内即可完成4种被分析物的液质联用分析。本方法在0.1～10μg/kg范围内各物质线性良好,线性系数在0.9991～0.9996之间。阿苯达唑、阿苯达唑亚砜、阿苯达唑砜、阿苯达唑-2-氨基砜在0.5～5.0μg/kg添加水平下的平均回收率分别为98.4%～102.6%,97.1%～103.4%,98.8%～103.7%和101.1%～104.2%检出限分别为0.2,0.1,0.2和0.1μg/kg;日内精密度小于4.77%,日间精密度小于3.03%。本方法为阿苯达唑及其代谢物的检测及监控提供了一种快速、灵敏度高、重现性好的定量分析方法。     

Therapeutic drug monitoring of albendazole: determination of albendazole, albendazole sulfoxide, and albendazole sulfone in human plasma using nonaqueous capillary electrophoresis

A nonaqueous capillary electrophoretic method (NACE) for the fast determination of plasma levels of albendazole (ABZ), albendazole sulfoxide (ABZSO), and albendazole sulfone (ABZSO2) is described. The assay is based upon liquid/liquid extraction of these compounds using dichloromethane at pH 10.2 (recovery between 63 and 98%), followed by a NACE separation performed within 8 min employing a 0.036 M borate buffer (apparent pH 9.9) in a mixture of methanol and N-methylformamide (1:3) and on-column absorbance detection at 280 nm. Using 0.5 mL of plasma and extract reconstitution in 200 microL N-methylformamide, drug levels between 1.0-10 microM were found to provide linear calibration graphs. Intraday and interday imprecisions evaluated from peak area ratios (n = 5) were <10% and <12%, respectively. Corresponding imprecisions of detection times (n = 5) were <1% and <6%, respectively. The limit of detection (LOD) for ABZ, ABZSO and ABZSO2 was 8 x 10(-7) M. The reliability of the method developed was verified via analysis of 45 plasma samples obtained from patients treated with ABZ. Good agreement was obtained between the levels of ABZSO and those determined by routine HPLC. ABZ was found to be undetectable in all patient samples, whereas the levels of ABZSO2 were below or close to LOD.     

LC–MS–MS identification of albendazole and flubendazole metabolites formed <Emphasis Type="Italic">ex vivo</Emphasis> by <Emphasis Type="Italic">Haemonchus contortus</Emphasis>

Resistance of helminth parasites to common anthelminthics is a problem of increasing importance. The full mechanism of resistance development is still not thoroughly elucidated. There is also limited information about helminth enzymes involved in metabolism of anthelminthics. Identification of the metabolites formed by parasitic helminths can serve to specify which enzymes take part in biotransformation of anthelminthics and may participate in resistance development. The aim of our work was to identify the metabolic pathways of the anthelminthic drugs albendazole (ABZ) and flubendazole (FLU) in Haemonchus contortus, a world-wide distributed helminth parasite of ruminants. ABZ and FLU are benzimidazole anthelminthics commonly used in parasitoses treatment. In our ex vivo study one hundred living adults of H. contortus, obtained from the abomasum of an experimentally infected lamb, were incubated in 5 mL RPMI-1640 medium with 10 μmol L⁻¹ benzimidazole drug (10% CO₂, 38 °C) for 24 h. The parasite bodies were then removed from the medium. After homogenization of the parasites, both parasite homogenates and medium from the incubation were separately extracted using solid-phase extraction. The extracts were analyzed by liquid chromatography–mass spectrometry (LC–MS) with electrospray ionization (ESI) in positive-ion mode. The acquired data showed that H. contortus can metabolize ABZ via sulfoxidation and FLU via reduction of a carbonyl group. Albendazole sulfoxide (ABZSO) and reduced flubendazole (FLUR) were the only phase I metabolites detected. Concerning phase II of biotransformation, the formation of glucose conjugates of ABZ, FLU, and FLUR was observed. All metabolites mentioned were found in both parasite homogenates and medium from the incubation.     

Enantioselective analysis of albendazole sulfoxide in cerebrospinal fluid by capillary electrophoresis

Albendazole (ABZ) is a benzimidazole anthelmintic drug used in the treatment of neurocysticercosis. After oral administration, ABZ is rapidly oxidized to albendazole sulfoxide (ABZSO), which has an asymmetric sulfur center, and later to albendazole sulfone (ABZSO2). ABZSO is the active metabolite responsible for the therapeutic effect of the drug. Previous studies have demonstrated pharmacokinetic differences between the two enantiomers, with the predominance of (+)-ABZSO in human biological fluids. This article describes for the first time the enantioselective analysis of ABZSO in cerebrospinal fluid (CSF) using capillary electrophoresis. The samples were prepared by liquid-liquid extraction using chloroform:isopropanol (8:2 v/v). The resolution of ABZSO enantiomers was obtained with a fused-silica capillary (60 cm x 75 microm ID) using 20 mmol/L Tris, pH 7.0, with 3.0% w/w sulfated beta-cyclodextrin as running buffer. The coefficient of variations and % relative error obtained for both within-day and between-days assays were lower than 15%. The method was linear over the concentration range of 100 to 2,500 ng/mL for each enantiomer, indicating that it is suitable for the analysis of ABZSO enantiomers in CSF from patients medicated with ABZ.     

Fast screening immunoassay of sulfonamides in commercial fish samples

An indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed in plate to detect three sulfonamide residues (sulfamerazine (SMR), sulfadimetoxine (SDM), and sulfadiazine (SDZ)) in gilthead sea bream (Sparus aurata) samples. Different extraction methodologies—using methanol/water 1:1 (v/v) + ethylene diamine tetraacetic acid (EDTA) 0.5% (m/v), acetonitrile, phosphate-buffered saline (PBS) 10 mmol L⁻¹ pH 7 and acetate buffer 100 mmol L⁻¹ pH 5—and cleanup steps, based on solid-phase extraction (C₁₈, SCX, Si) or liquid extraction with hexane, were assayed. As optimum, a fast and simple method using acetonitrile was selected to extract the sulfonamide residues from the edible muscle of fish. Due to matrix effects, a standard addition calibration curve in fish extract is necessary for quantification purposes. Sulfonamide-free samples were spiked at different concentration levels (between 30 and 90 ng g⁻¹, 5–15 ng mL⁻¹ in plate) and average recoveries (n = 8), ranging from 71% to 95%, 65% to 79%, and 72% to 95%, were obtained for SMR, SDM, and SDZ, respectively. The assay detection limits for these antibiotics were lower than 100 μg kg⁻¹ (maximum residue level established by the European Union). The accuracy was evaluated by spiking blank fish extracts at different concentrations (10–40 ng mL⁻¹, 5–20 ng mL⁻¹ in plate), and the relative errors ranged between ±20%. Finally, in order to confirm the utility of the developed ELISA as a screening methodology, fish samples from different supermarkets were analyzed, and results were compared with those obtained by a validated high-performance liquid chromatography (HPLC) method. The correlation between the results obtained by both ELISA and HPLC methods is satisfactory.      

Determination of albendazole and its metabolites in the muscle tissue of hybrid striped and largemouth bass using liquid chromatography with fluorescence detection

A liquid chromatographic method was developed for the determination of albendazole and its metabolites albendazole sulfoxide, albendazole sulfone, and albendazole-2-aminosulfone from largemouth and hybrid striped bass muscle tissue with adhering skin. The muscle tissue samples were made alkaline with potassium carbonate and extracted with ethyl acetate. The extracts were further subjected to cleanup by using a series of liquid-liquid extractions. After solvent evaporation, the residue was reconstituted in mobile phase and chromatographed. The chromatography was carried out on a reversed-phase Luna C18 column, using acetonitrile-methanol buffer as the mobile phase. The analytes were detected by fluorescence with excitation and emission wavelengths of 290 and 330 nm, respectively. The average recoveries from the fortified muscle tissue of the 2 fish species for albendazole (25-100 ppb), albendazole sulfoxide (8.75-52.5 ppb), albendazole sulfone (1-10 ppb), and albendazole-2-aminosulfone (10-100 ppb) were 89, 82, 99, and 74%, respectively. The coefficient of variation for each compound was <20% in all cases. The procedure was applied to the determination of albendazole and its 3 metabolites in the muscle tissue of the 2 fish species after orally dosing them with albendazole.     

Catalytic soot combustion of α-Fe/Ce–K–O nanocomposites via citrate-gel route

The binary phase, porous, nanocomposite xα-Fe/(1 − x)Ce_0.9–K_0.1–O (x = 0.05–0.2) catalysts and the catalyst-coated honeycomb ceramic device have been prepared by the citrate-gel thermal decomposition-reduction process and the sol–gel assisted dip-coating method, respectively. The nanocomposite of fluorite-type structure CeO₂ nanoparticles about 18–51 nm and α-Fe nanoparticles about 32 nm is obtained at 600 °C for 2 h in a deoxidization atmosphere and the α-Fe in nanocomposite has the suppression effect on grain growth of CeO₂. With Fe content increasing from 0.05 to 0.1, the specific surface area for the nanocomposites increases dramatically from about 4.4 to 43.0 m²/g, reaching a maximum value 57.7 m²/g at x = 0.15, and the pores vary from macropores to micro- or mesopores. Due to the presence of nano α-Fe, all the catalysts exhibit a very high soot catalytic activity, with the lowest T₂₀ (255 °C) and T₅₀ (291 °C) for the nanocomposite with x = 0.15, and it is confirmed by the bench test under practical diesel exhaust gases.     

A sensitive liquid chromatographic-mass spectrometric method for simultaneous determination of dehydroevodiamine and limonin from Evodia rutaecarpa in rat plasma

A liquid chromatographic–mass spectrometric (LC–MS) method has been developed and validated for simultaneous determination of dehydroevodiamine and limonin from Evodia rutaecarpa in rat plasma. After addition of the internal standard, domperidone, plasma samples were extracted by liquid–liquid extraction with ethyl acetate and separated on an Apollo C₁₈ column (250 mm × 4.6 mm, 5 μm), with methanol–0.01% formic acid water (60:40, v/v) as mobile phase, within a runtime of 12.0 min. The analytes were detected without interference in the selected ion monitoring (SIM) mode with positive electrospray ionization. The linear range was 1.0–500 ng mL⁻¹ for dehydroevodiamine and 2.0–1,000 ng mL⁻¹ for limonin, with lower limits of quantitation of 1.0 and 2.0 ng mL⁻¹, respectively. Intra-day and inter-day precision were within 6.0% and 10.9%, respectively, for both analytes, and the accuracy (relative error, RE, %) was less than 4.8% and 6.5%, respectively. The validated method was successfully applied to a comparative pharmacokinetic study of dehydroevodiamine and limonin in rat plasma after oral administration of dehydroevodiamine, limonin, and an aqueous extract of Evodiae fructus. The results indicated there were obvious differences between the pharmacokinetic behavior after oral administration of an aqueous extract of Evodiae fructus compared with single substances.     

Application of fully automated online solid phase extraction-liquid chromatography-electrospray-tandem mass spectrometry for the determination of sulfonamides and their acetylated metabolites in groundwater

The present study describes an automated methodology based on a liquid chromatography-electrospray, tandem mass spectrometry method combined with online solid phase extraction (online SPE-LC-ESI-MS/MS) for the simultaneous analysis of 16 sulfonamides (SAs) and five of their acetylated metabolites in groundwater. The evaluation of the degree of SA pollution in groundwater was made through the analysis of a total of 39 samples taken in seven groundwater bodies of Catalonia (Spain). Recovery values obtained ranged from 34.3% (N ⁴-acetylsulfadiazine) to 134.4% (sulfabenzamide). The method limits of detection for all the analytes were 0.09–11 ng L⁻¹. Sulfamethoxazole was the SA detected more frequently (56.4% of the samples), with an average concentration of 2.3 ng L⁻¹, followed by sulfadimethoxine, present in 54% of the samples with an average concentration of 0.2 ng L⁻¹. It should be highlighted that the acetylated metabolites were ubiquitous in the different samples, with frequencies of detection up to 36% and maximum concentrations of 18 ng L⁻¹ (N ⁴-acetylsulfamerazine).     

Kinetic determination of silver at trace level based on its catalytic effect on a ligand substitution reaction

It is observed that Ag(I) catalyzes the rate of substitution of phenylhydrazine (PhNHNH₂) into hexacyanoferrate(II), producing a cherry red colored complex, [Fe(CN)₅PhNHNH₂]³⁻. The reaction was monitored at 488 nm leading to the formation of the complex under the conditions: [Fe(CN)₆]⁴⁻ (5.0 × 10⁻³ mol dm⁻³), PhNHNH₂ (2.0 × 10⁻³ mol dm⁻³), temperature (25 ± 0.1 °C), pH (2.8 ± 0.02), and ionic strength, I (0.02 mol dm⁻³), (KNO₃). Under optimum conditions, absorbance at fixed times (A _t ) is linearly related to Ag(I) in the concentration range 10.79–97.08 ng cm⁻³, in the presence of several diverse ions. The highest percentage error and relative standard deviations in the entire range of Ag(I) determination are found to be 2.5% and 0.16, with a detection limit of 8.75 ng cm⁻³ of silver(I). The experimental accuracies expressed in terms of percentage recoveries are in the range of 97.87–102.50. The method was successfully applied for the determination of Ag(I) in a few synthetic samples and found to be in good agreement with those obtained from atomic absorption spectrophotometry (AAS). The validity of the proposed method has also been tested for Ag(I) determination in spiked drinking water samples. The present catalytic kinetic method (CKM) is highly sensitive, selective, reproducible, and inexpensive. A review of recently published catalytic spectrophotometric methods for determination of Ag(I) has also been presented for comparison.     

In-sample acetylation-non-porous membrane-assisted liquid–liquid extraction for the determination of parabens and triclosan in water samples

A procedure for the determination of seven parabens (esters of 4-hydroxybenzoic acid), including the distinction between branched and linear isomers of propyl- and butyl-parabens and triclosan in water samples, was developed and evaluated. The procedure includes in-sample acetylation-non-porous membrane-assisted liquid–liquid extraction and large volume injection–gas chromatography–ion trap–tandem mass spectrometry. Different derivatisation strategies were considered, i.e. post-extraction silylation with N-methyl-N-(tert-butyldimethylsilyl)-trifluoroacetamide and in situ acylation with acetic anhydride (Ac₂O) and isobutylchloroformate. Moreover, acceptor solvent and the basic catalyser of the acylation reaction were investigated. Thus, in situ derivatisation with Ac₂O and potassium hydrogenphosphate (as basic catalyser) was selected. Potassium hydrogenphosphate overcomes some drawbacks of other basic catalysers, e.g. toxicity and bubble formation, while leads to higher responses. Subsequently, other experimental variables affecting derivatisation–extraction yield such as pre-stirring time, salt addition and volume of Ac₂O were optimised by an experimental design approach. Under optimised conditions, the proposed method achieved detection limits from 0.1 to 1.4 ng L⁻¹ for a sample volume of 18 mL and extraction efficiencies, estimated by comparison with liquid–liquid extraction, between 46% (for methyl- and ethyl-parabens) and 110% (for benzylparaben). The reported sample preparation approach is free of matrix effects for parabens but affected for triclosan with a reduction of ≈ 40% when wastewater samples are analysed; therefore, both internal and external calibration can be used as quantification techniques for parabens, but internal standard calibration is mandatory for triclosan. The application of the method to real samples revealed the presence of these compounds in raw wastewater at concentrations up to 26 ng mL⁻¹, the prevalence of the linear isomer of propylparaben (n-PrP), and the coexistence of the two isomers of butylparaben (i-BuP and n-BuP) at similar levels.     

Fast and selective extraction of nicotine from human plasma based on magnetic strong cation exchange resin followed by liquid chromatography-tandem mass spectrometry

In the study, a fast and selective method based on magnetic separation has been developed for the extraction of nicotine from human plasma using magnetic strong cation exchange (MSCX) resins as adsorbent. MSCX resins were prepared using hydrophobic Fe₃O₄ magnetite as magnetically susceptible component, styrene and acrylic acid as polymeric matrix components, and acetyl sulfonate as the sulfonation agent. The extraction procedure was carried out in a single step by stirring the mixture of diluted plasma sample and MSCX resins in the vortex for 5 min. Then, the resins with adsorbed nicotine were separated from the sample matrix by applying an appropriate magnetic field. Main factors affecting the extraction of nicotine such as the amount of MSCX resins, pH value of the extraction solvent, extraction time, and washing and eluting conditions were optimized. The nicotine eluted from the resins was determined by liquid chromatography–tandem mass spectrometry. The calibration curve obtained by analyzing matrix-matched standards shows excellent linear relationship (r ² = 0.9998) in the concentration range of 10–2,500 ng mL⁻¹. The limit of detection and quantification obtained are 2.9 and 9.7 ng mL⁻¹, respectively. The relative standard deviations of intra- and inter-day obtained are in the range of 1.9–6.9% and 2.5–7.8% with the recoveries ranging from 78.7% to 99.1%. The proposed method was successfully applied to determine nicotine in human plasma phlebotomized from ten male smokers. Nicotine was detectable with the contents ranging from 44.4 to 221.9 ng mL⁻¹ in five samples.     

Determination of some sulfonylurea herbicides in soil by a novel liquid-phase microextraction combined with sweeping micellar electrokinetic chromatography

A novel method for the determination of five sulfonylurea herbicides in soil was developed by a dispersive solid-phase extraction (DSPE) clean-up followed by dispersive liquid–liquid microextraction (DLLME), prior to sweeping micellar electrokinetic chromatography (MEKC). In the DSPE-DLLME, 10 g of soil sample was first extracted with 10 mL of acetonitrile containing 5% formic acid (pH 3.0). The extract was then cleaned-up by a DSPE with C₁₈ as sorbent. A 1 mL aliquot of the resulting extract was then added into a centrifuge tube containing 5 mL of water adjusted to pH 2.0 and 60.0 μL chlorobenzene (as extraction solvent) for DLLME procedure. Then, the organic sample extraction solution was evaporated to dryness, and reconstituted with 20.0 μL of 1.0 mmol L⁻¹ Na₂HPO₄ (pH 10.0) for sweeping-MEKC analysis after DLLME. Under optimized conditions, the method provided as high as 3,000- to 5,000-fold enrichments factors. The linearity of the method was in the range of 3.3–200 ng g⁻¹ for chlorimuron ethyl and bensulfuron methyl, and in the range of 1.7–200 ng g⁻¹ for tribenuron methyl, chlorsulfuron and metsulfuron methyl, with the correlation coefficients (r) ranging from 0.9965 to 0.9983, respectively. The limits of detection (LODs) ranged from 0.5 to 1.0 ng g⁻¹. The intraday relative standard deviations (RSDs, n = 5) were below 5.3% and interday RSDs (n = 15) within 6.8%. The recoveries of the method for the five sulfonylureas from soil samples at spiking levels of 5.0, 20.0, and 100.0 ng g⁻¹ were 76.0–93.5%, respectively. The developed method has been successfully applied to the analysis of the target sulfonylurea herbicide residues in soil samples with a satisfactory result.     

Aladan scanning: The structure-activity relationship of dynorphin A

An unnatural amino acid, β-[6′-(N, N-dimethyl)amino-2′-naphthoyl]alanine (Ald) showing polarity-sen sitive fluorescence characteristics, was synthesized. A thorough Ald-scan of dynorphin A (Dyn A), the putative endogenous ligand for κ opioid receptors, was then performed. Replacement of the amino acid residues in positions 5, 8, 10, 12 or 14 of Dyn A(1-13)-NH2 with Ald resulted in compounds that had almost equal κ binding affinity compared with that of the parent compound; on the other hand, substi-tution o...     

Stir-bar-sorptive extraction and ultra-high-performance liquid chromatography–tandem mass spectrometry for simultaneous analysis of UV filters and antimicrobial agents in water samples

Stir-bar-sorptive extraction (SBSE) with liquid desorption (LD) and ultra-high-performance liquid chromatography–electrospray ionization triple-quadrupole tandem mass spectrometry (UHPLC–(ESI)MS–MS) were used for analysis of six personal care products in environmental water: four UV filters (2,2-dihydroxy-4-methoxybenzophenone, benzophenone-3, octocrylene, and octyldimethyl-p-aminobenzoic acid) and two antimicrobial agents (triclocarban and triclosan). Experimental conditions that affect SBSE-LD sorption efficiency (extraction time and temperature, sample pH, and ionic strength) and desorption efficiency (solvent, temperature, and time) were optimized. The method proved to be sensitive—a 50-mL sample was used to determine these compounds in environmental waters at trace levels. The detection limits of the analytical method were 2.5 ng L⁻¹ for river water and 5–10 ng L⁻¹ for effluent and influent sewage water. In river waters, benzophenone-3 was found at levels from 6 ng L⁻¹ to 28 ng L⁻¹ and triclosan at levels <LOQ. Benzophenone-3 was found between 75 and 127 ng L⁻¹ in influent sewage, whereas concentrations of benzophenone-3 and triclosan were commonly below 25 ng L⁻¹ in effluent sewage.     

Synthesis and characterization of 2-phenylaniline cyclopalladated complexes

Reaction of the dinuclear complex [Pd{κ2-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}Cl]₂ (1) with ligands (L = 4-picoline, sym-collidine) gave the six-membered palladacycles [Pd{κ2-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}Cl(L)] (2). The complex 1 reacted with AgX (X = CF₃SO₃, BF₄) and bidentate ligands [L–L = phen (phenanthroline), dppe (bis(diphenylphosphino)ethane), bipy(2,2′-bipyridine) and dppp (bis(diphenylphosphino)propane)] giving the mononuclear orthopalladated complexes [Pd{κ2-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(L–L)] (3) [L–L = phen, dppe, bipy and dppp]. These compounds were characterized by physico-chemical methods, and the structure of [Pd{κ2-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}Cl(L)] (L = sym-collidine) was determined by single-crystal X-ray analysis.     

Electrospun composite of polypyrrole-polyamide as a micro-solid phase extraction sorbent

A micro-solid phase extraction technique was developed using a novel polypyrrole-polyamide nanofiber sheet, fabricated by electrospinning method. The applicability of the new nanofiber sheet was examined as an extracting medium to isolate malathion as a model pesticide from aqueous samples. Solvent desorption was subsequently performed in a microvial, and an aliquot of extractant was injected into gas chromatography–mass spectrometry. Various parameters affecting the electrospinning process including monomer concentration, polyamide content, applied voltage, and electrospinning time were examined. After fabricating the most suitable preparation conditions, influential parameters on the extraction and desorption processes were optimized. The developed method proved to be rather convenient and offers sufficient sensitivity and good reproducibility. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) of the method under optimized conditions were 50 and 100 ng L⁻¹, respectively. The relative standard deviation at concentration level of 1 ng mL⁻¹ was 2% (n = 3). The calibration curve of analyte showed linearity in the range of 0.1–1 ng mL⁻¹ (R ² = 0.9975). The developed method was successfully applied to tap and Zayanderood river water samples, while the relative recovery percentages of 98% and 96% were obtained, respectively. The whole procedure showed to be conveniently applicable and quite easy to be manipulated.     

Determination of organic micro-pollutants such as personal care products, plasticizers and flame retardants in sludge

In this study, a method for the determination of organic micro-pollutants, i.e. personal care products such as synthetic musk fragrances, household bactericides, organophosphate flame retardants and plasticizers, as well as phthalates in sludge, has been developed. This method is based on lyophilisation and accelerated solvent extraction followed by clean-up steps, i.e. solid phase extraction and size exclusion chromatography. The determination is performed by gas chromatography coupled to mass spectrometry. Stable isotope-labelled compounds such as musk xylene (MX D₁₅), tri-n-butylphosphate (TnBP D₂₇) and triphenylphosphate (TPP D₁₅) were used as internal standards. Recovery rates were determined to be 36–114% (with typical relative standard deviation of 5% to 23%) for the target compounds. The limit of detection was 3–30 ng g⁻¹, and the limit of quantification was 10–100 ng g⁻¹ dry matter.