用白光信息处理作褪色透明片的彩色复原

本文提供了用白光信息处理技术作褪色透明彩色照片彩色复原的原理和实验,其中之一是由空间编码和彩色滤波两步骤完成的,即将待处理的透明彩色片用空间编码技术编制在一张黑白感光底片上,在白光光学处理系统的傅里叶平面中对这编码的黑白片的频谱进行彩色滤波,最后在系统的输出平面给出彩色增强或复原的图象,另一种是用白光处理技术作褪色透明彩色片的彩色复原实时处理,它可供及时的直接观察并且有操作简便,成本经济和能灵活多用的特点,这两种技术为彩色图象的彩色增强和复原提供了新方法。 关键词：     

数字三色条纹相移形貌投影栅线法

基于投影栅线的三色条纹相移算法与投影栅线法相结合,提出一种数字三色条纹相移形貌投影栅线法.此法是对时间相移法的改进,只需一幅三色条纹图,就可利用简单的三光强相移算法完成物体表面的形貌重建;不需要相移装置而误差较小,成本较低,简易实用,将有利于推广到动态实时分析.实验证明,此法是正确可行的.     

Color signal correlation detection by matched spatial filtering

A polychromatic correlation detection technique by complex spatial filtering is presented. This technique utilizes a diffraction grating and three co-lineared (red, green, and blue) coherent sources. The technique of complex spatial filter synthesis for the polychromatic corelation detection is demonstrated. This technique offers true color correlation detection which is very suitable for color signal recognition and identification. The correlation diffraction efficiency with this technique is generally higher than that of the wavelength-multiplexed technique. Several interesting experimental demonstrations of this color signal correlation detection scheme are provided. Finally we note that this color signal detection technique is a simple and versatile processing technique which has broad range of applications of complex color signal detection, recognition and identification.     

Hybrid two-dimensional continuous wavelet transform for analysis of phase-shifted interferograms

In interferogram or fringe pattern analysis, a technique capable of automatically analyzing interferograms that contain complex fringes and high-level noise as well as defects is highly demanded. In this paper, a hybrid technique combining the concepts of the two-dimensional continuous wavelet transform technique and the phase-shifting technique is proposed. The novel technique takes the advantages of the two existing techniques, and has the ability to accurately and automatically analyze multiple phase-shifted complex interferograms involving noise and defects. The validity of the technique is demonstrated by both computer simulation and real experiment.     

表面热透镜技术测试光学薄膜特性研究

在薄膜特性的研究工作中，激光引起的表面形变是一种广泛应用的技术。在这种技术中，薄膜的形变(热包高度小于0．1nm)一般是采用光热偏转技术来探测的。介绍了一种通过光学衍射效应来研究薄膜表面形变的新技术即表面热透镜技术，它是研究薄膜特性的一种灵敏且易于控制的方法。探讨了其理论模型及在薄膜的吸收测量和缺陷特性测试方面，该方法相对于传统方法的优点和潜力。     

彩色图象的光学信息处理

本文研究了在相干多色处理中用黑白透射介质进行彩色图象空间编码的方法。这个方法可应用于彩色象的信号检测、去模糊、及相加与相减。并且指出,类似于相干单色处理,这种多色处理方法有能力处理彩色图象。这个方法虽然有某些不足之处,例如需要对被处理对象事先进行编码。但是,这个方法展示了在彩色图象处理中的一个新的方向。而且,它并不只局限于处理彩色图象,也可应用于处理某些具有灰度变化的图象。 关键词：     

Multislip spatial filtered pseudocolor holographic imaging

A technique of pseudocolor encoding of spatial holographic imaging by a multslit rainbow process is illustrated. The encoding takes place at the spatial frequency plane of a coherent optical processor. The pseudocolor hologram imaging is obtained by white light reconstruction of the multiplexed rainbow hologram. The basic advantage of this technique as compared with the multiwavelength technique is the elimination of multicoherent sources. This multislit technique provides a simple encoding process for which a broad range of pseudo-color holographic images can be easily obtained. The potential applications of this technique may range from aerial photography for remote sensing to X-ray transparencies for medical diagnosis.     

Spectral characterization of fiber gratings with high resolution

We demonstrate a high-resolution technique to measure the optical magnitude and phase responses of fiber gratings. The technique employs single-sideband modulation of an optical source and has spectral resolution in the hertz regime. The technique is demonstrated by measurement of the phase ripples of unapodized and apodized chirped gratings as well as the transmission spectrum of a pi-phase-shifted grating. Although it is demonstrated on fiber gratings, the technique is applicable to any optical device.     

A new optical method for the detection of in-plane motion of ultrasound propagating in metals

This paper describes a laser optical technique for the detection of in-plane (IP) motion of ultrasonic waves propagating in solids. This interference-based laser optical technique includes a tiny square indentation with a width of about 30 microm on the sample surface and a relatively simple optical arrangement. The current technique is applied for the detection of in-plane motions of Lamb waves propagating in a thin brass plate. Measurement of S(0) mode dominated by in-plane motion in the low fd (frequency times thickness) regime is successfully demonstrated with the current technique. The newly proposed non-contact technique provides an alternative other than the heterodyne and Fabry-Perot techniques for the detection of IP motions with a relatively simple optical arrangement. This technique is not readily applicable to general NDE applications, where a position scan or an arbitrary selection of inspection location is needed. However, this technique can be useful in the areas such as fixed-position ultrasound monitoring or laboratory research activities involving optical detection of IP motion.     

Attack on double-random-phase-encoding-based image hiding method

The double-random phase-encoding (DRPE) technique is a typical optical image encryption technique, which can also be used for image hiding. Usually, the secret image is encrypted with the DRPE technique and the encoded image is hidden into the host image via superimposition to obtain the stego-image. The attack technique on the DRPE-based image hiding method was proposed in this paper. Firstly, a randomly selected superimposition coefficient was used to approximate the original superimposition coefficient to extract the hidden encoded images from the stego-images approximately. Then, the chosen-plaintext attack technique on the DRPE-based optical image encryption technique was applied to recover the random phase masks used in the DRPE technique. The theoretical analysis indicated that, without considering the computational error, the recovered secret image via the proposed attack technique is identical to the original one. Even considering the computational error, it is identical to the secret image recovered with the original DRPE-based image hiding method, which demonstrates that the attack on the DRPE-based image hiding method is successfully achieved. The numerical simulation results demonstrated the correctness of the theoretical analysis.     

Coupling to an endfaced multi-clad optical fibre from a misaligned gaussian beam or a separated multi-clad fibre

The excitation of a multi-clad optical fibre by a misaligned gaussian beam is analysed using a least-squares boundary residual modal technique and a Born approximation. The modal technique is used to analyse the axial coupling via a gap between two aligned fibres. Comparison is made with a method based on a gaussian approximation for the fibre fields. Results of the modal technique confirm the accuracy of the Born approximation when corrected for Fresnel reflection. However, the modal technique is more precise than the other methods when serious mismatch exists and is efficient for treating the gap problem, where the Born approximation is not applicable.     

Low noise spinning wheel technique for THz material parameter extraction

Double-modulated terahertz differential time-domain spectroscopy (double-modulated THz-DTDS), is a technique that is based on dithering the sample under test. In this paper, we report a measurement technique based on mounting the sample on a spinning wheel, in order to overcome fundamental limitations imposed by linear dithering. We demonstrate a proof-of-principle showing that noise decreases as a function of the spinning wheel modulation frequency. This technique does not suffer the mechanical noise limitation of traditional linear dithering and thus opens up future scope for further noise reduction via hardware advances in the modulation frequency of the wheel. The spinning wheel technique enables a rapid succession of measurements between the reference and sample signals with a single mechanical delay scan. As a result, an improvement in measurement time by at least a factor of two, as compared to the conventional THz-TDS measurement technique is observed. The spinning wheel technique is experimentally verified by measuring the dielectric properties of a thick polymer material.     

激光诱导击穿光谱技术的研究与应用新进展

激光诱导击穿光谱技术(LIBS)是一种近年来随着激光技术和光谱检测技术的发展而兴起的对元素定性和定量分析的光谱技术。详细介绍了LIBS技术最新的研究发展情况,以及在冶金、环境污染检测、生物医学、植物学、空间探索等领域的最新应用进展。     

光谱成像信息的数据融合技术在储层表征中的应用

光谱成像技术在矿物学和岩石学方面已得到广泛应用,然而,面对数量巨大、覆盖范围广阔的目标成像光谱数据,如何从中获取所需要的信息,并对其进行信息增强是需要亟待解决的问题。将显微红外光谱成像分析系统得到的实验结果,利用显微光谱成像信息的数据融合技术进行了数据处理,得到岩心样品中不同化学组分、基团的空间分布图。结果表明,利用该技术更好地揭示了不同烃类在岩石中的分布情况、孔隙的连通性等信息,显微光谱成像信息的数据融合技术为储层表征提供了一种新方法。     

Large amplitude point-vibration measurement with optical-fiber moiré-based technique

We describe a technique that is used for the real-time measurement of the vibration of an object point. The technique can be used when the vibration is characterized by a large amplitude, i.e. several millimeters. The technique has additional advantages that it requires no special surface treatment and is insensitive to object in-plane displacements that are small. In this technique an object point is illuminated by a small diameter beam (at an angle) that is structured with straight parallel fringes. The illuminated object point is then imaged onto a Ronchi ruling. The total light transmitted through the Ronchi ruling is then used to recover the vibration of the object point, in real time, by using well-known servo techniques.     

Multi-objective strategy to optimize dithering technique for high-quality three-dimensional shape measurement

Dithering optimization techniques can be divided into the phase-optimized technique and the intensity-optimized technique. The problem with the former is the poor sensitivity to various defocusing amounts, and the problem with the latter is that it cannot enhance phase quality directly nor efficiently. In this paper, we present a multi-objective optimization framework for three-dimensional(3D) measurement by utilizing binary defocusing technique. Moreover, a binary patch optimization technique is used to solve the time-consuming issue of genetic algorithm. It is demonstrated that the presented technique consistently obtains significant phase performance improvement under various defocusing amounts.     

SHROUD TECHNIQUE USING THE TRANSIENT METHOD FOR LOCAL HEAT TRANSFER MEASUREMENTS

A new technique for measuring local heat transfer coefficients on complex-shaped models is described. This technique is referred to as the shroud technique and is a variation on the well-known transient method. The technique involves preheating a model inside a shroud while it is installed in a wind tunnel. The shroud is then ejected, exposing the model to ambient temperature air. The transient temperature on the surface of the model is measured using liquid crystals and recorded with a video system. Although an infinite variety of model shapes can be used, measurements on a cylinder in cross-flow are used to demonstrate this technique. The measurements are compared with earlier measurements, which used different techniques. Good agreement is found at the stagnation point and in the front laminar boundary-layer region. In the separation region, the heat transfer rate is dependent an the thermal boundary condition, which in the transient method is affected by the selection of the nondimensional liquid crystal temperature. In the wake region, it was found that the results depend on the flow development time relative to the transient measurement time.     

Phenomenological theory of multicritical points splitting in the phase diagrams. The case of Landau’s potentials with ℒ = 3m

A general technique of exact calculation of any correlation functions for the special class of one-dimensional spin models containing small clusters of quantum spins assembled to a chain by alternating with the single Ising spins is proposed. The technique is a natural generalization of that in the models solved by a classical transfer matrix. The general expressions for corresponding matrix operators which are the key components of the technique are obtained. As it is clear from the general principles, the decay of the correlation functions of various types is explicitly shown to be governed by a single correlation length. The technique is illustrated by two examples: symmetric diamond chain and asymmetric sawtooth chain.     

Artifact Halo Reduction in Phase Contrast Microscopy Using Apodization

A new phase contrast microscopy technique for halo reduction is proposed. This technique is based on an apodization method combined with the Zernike phase contrast method. Although it has been a difficult theoretical problem, the proposed technique achieves halo reduction by considering angles of diffraction and phase differences. The technique utilizes an apodized phase plate consisting of a quarter wave phase shift ring with a 25% transmittance, and a pair of adjacent rings, which have 50% transmittance. This element is placed at the back focal plane of the objective. The result is startling, halo reduced images of phase objects providing enhanced inner details.     

Recovery of the free field in noisy environment by using the spherical wave superposition method

To remove the scattering effect of the disturbing sound on the target source when implementing nearfield acoustic holography in a non-free field, a free field recovery technique based on the spherical wave superposition method is proposed. In the method, the sound field separation technique based on the spherical wave superposition method is first used to separate the incoming and outgoing fields, and a further step for separating the radiated and scattered fields is performed by utilizing the surface admittance of the target source as the boundary condition. The technique makes it possible to correctly identify noise sources in a non-free sound field. The basic principle of the technique is described firstly, a method for choosing the optimal number of spherical wave expansion terms is given, and two numerical simulations are used to demonstrate the validity of this technique. It is shown that, for the lower frequency, the scattering effect can be neglected, and the radiated field of the target source can be obtained by the sound field separation technique, however, as the increasing of the frequency, the scattering effect cannot be neglected, and the free field recovery technique has to be used to obtain the radiated field of the target source.