Stimulated self-trapped exciton emission in CsI:Pb

Defects of the type of V_K and Pb⁺ centres were created in CsI:Pb under the 4.03 eV XeCl laser line irradiation at 10 K. After irradiation, the self-trapped and localized exciton emission excited by the same XeCl laser line was observed as a result of the recombination of electrons, optically released from Pb⁺, with the V_K centres. A strongly superlinear dependence of the emission intensity on the excitation intensity was found for the 3.65 eV emission of the self-trapped exciton. A much weaker superlinearity was observed for the visible localized exciton emission. Optical amplification of the exciton emission was considered as the most probable reason of the observed phenomenon. At 10 K, optical gain G=3.74 was calculated for the self-trapped exciton emission.     

First-principles study on electronic structures of BaWO4 crystals containing F-type color centers

The electronic structures of BaWO₄ crystals containing F-type color centers are studied within the framework of the fully relativistic self-consistent Dirac-Slater theory, using a numerically discrete variational (DV-Xα) method. It is concluded that F and F⁺ color centers have donor energy level in the forbidden band. The optical transition energies are 2.449 and 3.101 eV, which correspond to the 507 and 400 nm absorption bands, respectively. It is predicted that 400-550 nm absorption bands originate from the F and F⁺ color centers in BaWO₄ crystals.     

Enhanced photo-response of thin-film structures with nanocrystals

Thin-film multilayers with dielectric and semiconductor nanolayers of 200-10 nm thicknesses have been deposited by thermal evaporation onto irradiation-resistive substrates using pure crystals as evaporated targets. Some multilayers were γ-irradiated in air at room temperature with dose of 83 kGy. X-ray diffraction and microscopy studies reveal that the multilayers consist of nanometer-sized crystals with cubic structure and defined size. Film structures were oriented along the (1 1 1) plane. Absorption spectra of non-irradiated LiF nanocrystals of 100 nm size and those of initial crystals give evidence of metal colloids presence. Photoluminescence spectra of γ-irradiated nanostructures with various LiF content show the enhancement of F₃⁺-colour centres excitation in the region of metal colloids absorption and the increase is observed between emission intensities of F₃⁺ and F₂ centers with respect to initial crystals γ-coloured in identical conditions. Emission intensities of both centers under excitation in the M band correlate with LiF content. These effects, which are related to high-quality nanocrystals, but at the same time depend strongly on the defect content, especially as far as their 1-2 ps nonlinearities are concerned, could depend on nanocrystal purity and metal excess collection in their boundaries regions.     

Anisotropic nonlinear optical absorption of gold nanorods in a silica matrix

Nanocomposite films consisting of gold nanospheres or gold nanorods embedded in a silica matrix have been prepared using a hybrid deposition technique consisting of plasma-enhanced chemical vapor deposition of SiO₂ and co-sputtering of gold, followed by annealing at 900 °C. Subsequent irradiation with 30 MeV heavy ions (Cu⁵⁺) was used to form gold nanorods. Linear and nonlinear optical properties of this material are closely related with the surface plasmon resonance in the visible. The nonlinear absorption coefficient (α₂@532 nm) for the films containing gold nanospheres was measured by Z-scan and P-scan techniques, and it was found to be isotropic and equal to −4.8 × 10⁻² cm/W. On the contrary, gold nanorods films exhibited two distinct surface plasmon resonance absorption bands giving rise to a strong anisotropic behavior, namely a polarization-dependent linear absorption and saturable absorption. Z-scan and P-scan measurements using various light polarization directions yielded nonlinear absorption coefficient (α₂@532 nm) values varying from −0.9 × 10⁻² cm/W up to −3.0 × 10⁻² cm/W. Linearity of the P-scan method in the context of nanocomposite saturable absorption is also discussed.     

Observation of nonstationary effects in saturation spectroscopy

We have studied the nonstationary effects in saturated absorption spectroscopy of the ⁸⁷Rb D₂ line. Varying the size of the σ⁺ polarized pump laser beam, we observed saturated absorption spectra for the σ^± polarized probe beam. For equal polarizations of the pump and probe beams, we found that the resonance signal for the F_g = 1 → F_e = 2 line, and the crossover lines between F_g = 1 → F_e = 2 and F_g = 1 → F_e = 1 (and 0) lines increased to a greater extent than the others. This observation can be understood from the calculated time evolution of the populations of the ground-state sublevels by means of a rate equation model. We also compared experimental data for other conditions with the calculated results. We found good agreement between the calculated results and the data.     

Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

Nano-star formation in Al-doped ZnO thin film deposited by dip-dry method and its characterization using atomic force microscopy, electron probe microscopy, photoluminescence and laser Raman spectroscopy

Zinc oxide doped with Al (AZO) thin films were prepared on borosilicate glass substrates by dip and dry technique using sodium zincate bath. Effects of doping on the structural and optical properties of ZnO film were investigated by XRD, EPMA, AFM, optical transmittance, PL and Raman spectroscopy. The band gap for ZnO:Al (5.0 at. wt.%) film was found to be 3.29 eV compared with 3.25 eV band gap for pure ZnO film. Doping with Al introduces aggregation of crystallites to form micro-size clusters affecting the smoothness of the film surface. Al³⁺ ion was found to promote chemisorption of oxygen into the film, which in turn affects the roughness of the sample. Six photoluminescence bands were observed at 390, 419, 449, 480, 525 and 574 nm in the emission spectra. Excitation spectra of ZnO film showed bands at 200, 217, 232 and 328 nm, whereas bands at 200, 235, 257 and 267 nm were observed for ZnO:Al film. On the basis of transitions from conduction band or deep donors (CB, Zn_i or V_OZn_i) to valence band and/or deep acceptor states (VB, V_Zn or O_i or O_Zn), a tentative model has been proposed to explain the PL spectra. Doping with Al³⁺ ions reduced the polar character of the film. This has been confirmed from laser Raman studies.     

Color centers in neutron-irradiated Y3Al5O12, CAF2 and LiF single crystals

The thermal annealing behavior of the Y₃Al₅O₁₂, CaF₂ and LiF single crystals bombarded at Algiers with reactor neutrons has been monitored by optical absorption spectroscopy. The irradiation was performed at about 315 K. On heating samples after irradiation, the optical absorption bands decrease and disappear completely at 873 and 523 K in the case of Y₃Al₅O₁₂ and CaF₂, respectively. Activation energies of 1.2±0.02 and 0.9±0.2 eV are estimated for Y₃Al₅O₁₂ and CaF₂, respectively. On the other hand, the LiF crystal shows a complex annealing behavior. Here, the optical absorption spectrum presents different shapes after each annealing temperature. Four steps are distinguished and discussed on heating samples from 300 to 673 K. Above 673 K, the absorption drops by about 50%; it completely disappears at 773 K.     

Nonlinear optical properties of periodic gold nanoparticle arrays

Periodic Au nanoparticle arrays were fabricated on silica substrates using nanosphere lithography. The identical single-layer masks were prepared by self-assembly of polystyrene nanospheres with radius R = 350 nm. The structural characterization of nanosphere masks and periodic particle arrays was investigated by atomic force microscopy. The nonlinear optical properties of the Au nanoparticle arrays were determined using a single beam z-scan method at a wavelength of 532 nm with laser duration of 55 ps. The results show that periodic Au nanoparticle arrays exhibit a fast third-order nonlinear optical response with the nonlinear refractive index and nonlinear absorption coefficient being n₂ = 6.09 × 10⁻⁶ cm²/kW and β = −1.87 × 10⁻⁶ m/W, respectively.     

Spectroscopic investigations of Nd-, Er-, Er/Yb-, and Tm-ions doped SiO2-Al2O3-CaF2-GdF3 glasses

This paper reports on the absorption, visible and near-infrared luminescence properties of Nd³⁺, Er³⁺, Er³⁺/2Yb³⁺, and Tm³⁺ doped oxyfluoride aluminosilicate glasses. From the measured absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been calculated for all the studied ions. Decay lifetime curves were measured for the visible emissions of Er³⁺ (558 nm, green), and Tm³⁺ (650 and 795 nm), respectively. The near infrared emission spectrum of Nd³⁺ doped glass has shown full width at half maximum (FWHM) around 45 nm (for the ⁴F_3/2→⁴I_9/2 transition), 45 nm (for the ⁴F_3/2→⁴I_11/2 transition), and 60 nm (for the ⁴F_3/2→⁴I_13/2 transition), respectively, with 800 nm laser diode (LD) excitation. For Er³⁺, and Er³⁺/2Yb³⁺ co-doped glasses, the characteristic near infrared emission bands were spectrally centered at 1532 and 1544 nm, respectively, with 980 nm laser diode excitation, exhibiting full width at half maximum around 50 and 90 nm for the erbium ⁴I_13/2→⁴I_15/2 transition. The measured maximum decay times of ⁴I_13/2→⁴I_15/2 transition (at wavelength 1532 and 1544 nm) are about 5.280 and 5.719 ms for 1Er³⁺ and 1Er³⁺/2Yb³⁺ (mol%) co-doped glasses, respectively. The maximum stimulated emission cross sections for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ and Er³⁺/Yb³⁺ are 10.81×10⁻²¹ and 5.723×10^-21 cm². These glasses with better thermal stability, bright visible emissions and broad near-infrared emissions should have potential applications in broadly tunable laser sources, interesting optical luminescent materials and broadband optical amplification at low-loss telecommunication windows.     

Switching phenomenon and optical properties of Se85Te10Bi5 films

Se₈₅Te₁₀Bi₅ films of different thicknesses ranging from 126 to 512 nm have been prepared. Energy-dispersive X-ray (EDX) spectroscopy technique showed that films are nearly stoichiometric. X-ray diffraction (XRD) measurements have showed that the Se₈₅Te₁₀Bi₅ films were amorphous. Electrical conduction activation energy (ΔE_σ) for the obtained films is found to be 0.662 eV independent of thickness in the investigated range. Investigation of the current voltage (I-V) characteristics in amorphous Se₈₅Te₁₀Bi₅ films reveals that it is typical for a memory switch. The switching voltage V_th increases with the increase of the thickness and decreases exponentially with temperature in the range from 298 to 383 K. The switching voltage activation energy (ε) calculated from the temperature dependence of V_th is found to be 0.325 eV. The switching phenomenon in amorphous Se₈₅Te₁₀Bi₅ films is explained according to an electrothermal model for the switching process. The optical constants, the refractive index (n) and the absorption index (k) have been determined from transmittance (T) and reflectance (R) of Se₈₅Te₁₀Bi₅ films. Allowed non-direct transitions with an optical energy gap (E_g^opt) of 1.33 eV have been obtained. ΔE_σ is almost half the obtained value of E_g^opt, which suggested band to band conduction as indicated by Davis and Mott.     

Growth and electrical properties of ZnO nanorod arrays prepared by chemical spray pyrolysis

Chemical spray pyrolysis was applied to grow ZnO nanorod arrays from zinc chloride solutions with pH=2 and 5 on glass/ITO substrate at 480 and 550 °C. The obtained structures were characterized by their morphological, electrical and PL properties. According to SEM, deposition of acidic solutions retards coalescence of the growing crystals. The charge carrier density in ZnO nanorods was determined from the C-V characteristics of ZnO/Hg Schottky barrier. Carrier densities ∼10¹⁵ cm⁻³ and slightly above 10¹⁶ cm⁻³ were recorded for ZnO deposited at 550 and 480 °C, respectively. According to PL studies, intense UV-emission is characteristic of ZnO independent of growth temperature, the concentration of oxygen vacancy related defects is lower in ZnO nanorods deposited at 550 °C. Solution pH has no influence on carrier density and PL properties.     

Giant Faraday rotation in Fe–ZnSe granular films

The giant magneto-optical Faraday effect (giant Faraday rotation) of ferromagnetic metal–semiconductor matrix Fe–ZnSe granular films prepared by radio frequency sputtering is studied. The result shows that the Faraday rotation angle θ_F value of the granular films sample with Fe volume fraction x=35% is of the order of 10⁵ °/cm at room temperature. Temperature dependence of the θ_F of Fe_0.35(ZnSe)_0.65 granular films shows that θ_F value, below 150 K, increases rapidly with the decrease of the temperature, and when T=10 K θ_F value is 6×10⁵ °/cm. Through the study of the structure and dependence of magnetic properties on temperature, it has been found that the remarkable increase of the θ_F value of Fe_0.35(ZnSe)_0.65 granular films below 150 K seems to arise from the sp–d exchange interaction inside the granular films.     

Growth and spectral characterization of β-Ga2O3 single crystals

Beta gallium oxide (β-Ga₂O₃) single crystals were grown by the floating zone technique. The absorption spectra and the luminescence of the crystals were measured. The absorption spectra showed an intrinsic short cutoff edge around 260 nm with two shoulders at 270 and 300 nm. Not only the characteristic UV (395 nm), blue (471 nm) and green (559 nm) lights, but also the red (692 nm) light can be seen in the emission spectra. The deep UV light was attributed to the existing of quantum wells above the valence band and the red light was owed to the electron-hole recombination via the vicinity donors and acceptors.     

Emission analysis of Dy and Pr:Bi2O3-ZnF2-B2O3-Li2O-Na2O glasses

In this paper, we present the spectral results of Dy³⁺ and Pr³⁺ (1.0 mol%) ions doped Bi₂O₃-ZnF₂-B₂O₃-Li₂O-Na₂O glasses. Measurements of X-ray diffraction (XRD), differential scanning calorimetry (DSC) profiles of these rare-earth ions doped glasses have been carried out. From the DSC thermograms, glass transition (T_g), crystallization (T_c) and melting (T_m) temperatures have been evaluated. The direct and indirect optical band gaps have been calculated based on the glasses UV absorption spectra. The emission spectrum of Dy³⁺:glass has shown two emission transitions ⁴F_7/2→⁶H_15/2 (482 nm) and ⁴F_7/2→⁶H_13/2 (576 nm) with an excitation at 390 nm wavelength and Pr³⁺:glass has shown a strong emission transition ¹D₂→³H₄ (610 nm) with an excitation at 445 nm. Upon exposure to UV radiation, Dy³⁺ and Pr³⁺ glasses have shown bright yellow and reddish colors, respectively, from their surfaces.     

Study of optical nonlinearity of functionalized multi-wall carbon nanotubes by using degenerate four wave mixing and Z-scan techniques

The phase conjugation geometry of degenerate four wave mixing (DFWM) technique has been employed to study the third-order optical nonlinear susceptibility (χ³) and second-order hyperpolarizability of multi-wall carbon nanotubes (MWCNTs). MWCNTs were grown by thermal chemical vapor deposition method and, subsequently functionalized with carboxylic acid group to improve their solubility in an organic solvent, ethylene glycol. The average hyperpolarizability for each carbon atom has been found to be 4.74 × 10⁻⁴⁶ m⁵/V² for the pump pulse of 8 ns at 532 nm. Decreasing the pulse width of the pump laser decreases the average value of hyperpolarizability. The absorption spectra show a monotonous increase from IR through visible and give an opportunity to estimate the imaginary part of the χ³ by the open aperture Z-scan technique.     

Second order gauge theory

A gauge theory of second order in the derivatives of the auxiliary field is constructed following Utiyama’s program. A novel field strength G = ∂F + fAF arises besides the one of the first order treatment, F = ∂A − ∂A + fAA. The associated conserved current is obtained. It has a new feature: topological terms are determined from local invariance requirements. Podolsky Generalized Eletrodynamics is derived as a particular case in which the Lagrangian of the gauge field is L_P ∝ G². In this application the photon mass is estimated. The SU (N) infrared regime is analysed by means of Alekseev-Arbuzov-Baikov’s Lagrangian.     

A simplified reactive thermal evaporation method for indium tin oxide electrodes

Indium tin oxide (ITO) films approximately 120 nm thick were deposited onto unheated glass substrates by using reactive thermal evaporation (RTE) and in situ post-evaporation annealing in oxygen. We show that this simplified method can be used to produce high quality ITO thin films with low electrical resistivity (10⁻³ Ω cm) and high transmittance (approximately 80% at 550 nm). The refractive index is approximately 2.0 and the direct optical band gap of the films (above 3.0 eV) is in good agreement with previously reported values. Since this deposition method does not require heating the substrates or furnace annealing at high temperatures, it can be advantageous when it is necessary to decrease the thermal budget on underlying devices or layers.     

The optical absorption edge of brookite TiO2

The optical absorption edge of brookite TiO₂ was measured at room temperature, using natural crystals. The measurements extend up to 3.54 eV in photon energy and 2000 cm⁻¹ in absorption coefficient. The observed absorption edge is broad and extends throughout the visible, quite different from the steep edges of rutile and anatase. No evidence of a direct gap is seen in the range measured. The spectral dependence of the absorption strongly suggests that the brookite form of TiO₂ is an indirect-gap semiconductor with a bandgap of about 1.9 eV.     

Optical absorption of 1-phenyl-3-methyl-1H-pyrazolo[3,4-b]quinoline derivatives: Molecular dynamics modeling

Paper deals with quantum chemical modeling of the optical absorption spectra of 6-fluoro, 7-trifluoromethyl, 6-cyano, 6-carboethoxy and 6-tert-butyl derivatives of 1-phenyl-3-methyl-1H-pyrazolo[3,4-b]quinoline. The calculations are performed by means of the semiempirical quantum chemical methods (AM1 or PM3) applied to the equilibrium molecular conformation in vacuo (T = 0 K) or molecular dynamic (MD) trajectories as obtained within fragmental or total MD simulations at T = 300 K. The results of these calculations are compared with the measured spectra of optical absorption. The quantum chemical analysis show that the dynamics of the methyl, trifluoromethyl, carboethoxy and tert-butyl groups practically does not influence the absorption spectra whereas the strongest their modifications are found to be related with dynamics of the aromatic group. The semiempirical method AM1 in combination with MD simulations gives for all dyes the best agreement between the calculated and measured spectral positions of absorption bands. In most cases the quantum chemical calculations describe properly the trends of their changes depending on the lateral substituent.