Heat capacities and thermodynamic properties of Ni9(btz)12(DMA)6(NO3)6

The low-temperature molar heat capacity of crystalline Ni₉(btz)₁₂(DMA)₆(NO₃)₆ (1) (btz = benzotriazolate; DMA = N,N′-dimethylacetamide) was measured by temperature-modulated differential scanning calorimetry for the first time. The thermodynamic parameters such as entropy and enthalpy relative to reference temperature 298.15 K were obtained based on the above molar heat capacity data. The compound was synthesized by solvothermal method and characterized by powder X-ray diffraction and FT-IR spectra. Moreover, the thermal stability and the decomposition mechanism of Ni₉(btz)₁₂(DMA)₆(NO₃)₆ were investigated by thermogravimetry (TG) analysis under air atmosphere from 300 to 873 K. The experimental results through TG measurement demonstrate that the compound has a two-stage mass loss in air flow.     

Heat capacities and thermodynamic properties of Co(3,5-PDC)(H2O)

A novel metal-organic frameworks Co(3,5-PDC)(H₂O) (CoMOF, 3,5-PDC = pyridine-3,5-dicarboxylic acid) has been synthesized hydrothermally and characterized by single-crystal XRD and FT-IR spectra. The thermal stability and the decomposition mechanism of CoMOF were investigated by thermogravimetry-mass spectrometry, and a two-stage shape curve of mass loss was observed. Moreover, the low-temperature molar heat capacities were measured by temperature-modulated differential scanning calorimetry for the first time. The thermodynamic parameters such as entropy and enthalpy relative to reference temperature 298.15 K were derived based on the molar heat capacity data.     

Heat capacities and thermodynamic properties of a 3D Cu(II) supramolecular complex

A 3D supramolecule (H₃O)₂[Cu(2,6-pdc)₂]·H₂O (pdc = pyridinedicarboxylate) has been solvothermally synthesized and characterized by X-ray powder diffraction and FT-IR spectrum. The thermal decomposition characteristics of the complex were investigated by thermogravimetric analysis, which revealed a three-step mass loss process. The low-temperature molar heat capacities of crystalline (H₃O)₂[Cu(2,6-pdc)₂]·H₂O were measured by temperature-modulated differential scanning calorimetry for the first time. A phenomenon of glass transition was observed. The thermodynamic parameters such as entropy and enthalpy relative to 298.15 K were calculated based on the above molar heat capacity data.     

Exceptional thermal stability and thermodynamic properties of lithium based metal–organic framework

A three-dimensional lithium-based metal–organic framework Li₂(2,6-NDC) (2,6-NDC = 2,6-naphthalene dicarboxylate) has been synthesized solvothermally and characterized by X-ray powder diffraction, elemental analysis, FT-IR spectroscopy, thermogravimetry and mass spectrometer analysis (TG–MS). The framework has exceptional stability and is stable to 863 K. The thermal decomposition characteristic of this compound was investigated through the TG–MS from 293 to 1250 K. The molar heat capacity of the compound was measured by temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 195 to 670 K for the first time. The thermodynamic parameters such as entropy and enthalpy versus 298.15 K based on the above molar heat capacity were calculated.     

水合烟酸铜Cu(Nic)2•H2O(s)(Nic＝烟酸)的合成、表征及热力学性质

近几十年来,烟酸盐类化合物或配合物由于优越的吸收率高和无毒副作用等特点使其在化妆品、药品和食品等领域作为营养添加剂具有重要应用前景。然而,这类化合物的基础热力学数据极其缺乏,从而限制了这类化合物的理论研究和应用开发的深入开展。为此,本论文利用室温固相合成方法和球磨技术合成了一种新化合物Cu(Nic)2•H2O(s),利用化学分析、元素分析、FTIR和X-射线粉末衍射技术表征了它的结构和组成,利用精密自动绝热热量计准确地测量了它在78-400 K温区的摩尔热容。在热容曲线的T ＝ 326-346 K温区观察到一个明显的固-液相变过程。利用相变温区三次重复实验热容的测量结果确定了此相变过程的峰温、相变焓和相变熵分别为：Tfus＝(341.290 ±0.873) K, DfusHm＝(13.582±0.012) kJ×mol-1, DfusSm＝(39.797±0.067) J×K-1×mol-1。通过最小二乘法将相变前和相变后的热容实验值分别拟合成了热容对温度的两个多项式方程。通过热容多项式方程的数值积分,得到了这个化合物的舒平热容值和相对于298.15 K的各种热力学函数值,并且将每隔5 K的热力学函数值列成了表格。     

Crystal Structure, Phase Transition, and Thermodynamic Properties of Bis-dodecylammonium Tetrachlorozincate (C12H25NH3)2ZnCl4(s)

The crystal structure and composition of (C₁₂H₂₅NH₃)₂ZnCl₄(s) were characterized by chemical and elemental analysis, X‐ray powder diffraction technique and X‐ray crystallography. The lattice energy of the title compound was calculated to be U_POT=888.82 kJ·mol^?1. Low temperature heat capacities of the title compound have been measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 403 K. An obvious solid to solid phase transition occurred in the heat capacity curve, and the peak temperature, molar enthalpy and molar entropy of the phase transition of the compound were determined to be T_trs= (364.02±0.03) K, (_trsH_m= (77.567±0.341) kJ·mol^?1, and (_trsS_m= (213.77±1.17) J·K^?1·mol^?1, respectively. Experimental molar heat capacities before and after the phase transition were respectively fitted to two polynomial equations. The smoothed molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were calculated and tabulated at an interval of 5 K.     

Synthesis,thermal decomposition and dielectric behavior of bis(thiourea)silver(I)nitrate

New semi-organic bis(thiourea)silver(I)nitrate (TuAgN) single crystals have been grown from slow evaporation solution growth technique. Single crystal X-ray diffraction study reveals that the crystal belongs to orthorhombic system with the non-centrosymmetric space group C2221 and the calculated cell parameters are a = 33.3455 (6) Å, b = 45.2957 (7) Å, c = 20.3209 (5) Å, α = β = γ = 90°, and V = 30692.8 (10) Å ³. The thermal stability and decomposition behavior of TuAgN compound have been studied by thermogravimetric analysis at three different heating rates 5, 10, and 15 °C min^?1. The effective activation energy (E _a) and pre-exponential factor (ln A) of thermal decomposition of thiourea from TuAgN compound at three different heating rates are estimated by model free methods: Arrhenius, Flynn–Wall, Kissinger, and Kim–Park. The calculated effective activation energies were found to vary with the fraction (α) reacted. The compensation effect between the (ln A) and (E _a) has also been studied. Dielectric properties of TuAgN crystal have been studied in a wide range of frequencies and temperatures. AC conductivity has also been carried out.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Crystal structure and thermal analysis of diaquadi (1,2,4-triazol-5-one)zinc(II) ion nitrate

A new complex, diaquadi(1,2,4-triazol-5-one)zinc(II) ion nitrate formulated as {[Zn(TO)₂(H₂O)₂](NO₃)₂}_n (1) (1,2,4-triazole-5-one, abbreviated as: TO) was synthesized and characterized by elemental analysis, X-ray single crystal diffraction, infrared spectrum (IR), differential scanning calorimetry (DSC), thermogravimetric analysis and differential thermogravimetric analysis (TG-DTG). The X-ray structure analysis reveals that the complex is orthorhombic with space group Pbca and unit-cell parameters a=6.9504(2) Å; b=10.6473(3) Å; c=17.8555(5) Å. Based on the result of thermal analysis, the thermal decomposition process of the compound was derived. From measurement of the enthalpy of solution in water in 298.15 K, the standard molar enthalpy of solution of lignand TO and the complex were determined as 15.43±0.18 and 52.64±0.42 kJ mol^?1, respectively. In addition, the standard molar enthalpy of formation of TO(aq) was calculated as ?126.97±0.72 kJ mol^?1.     

Thermodynamic properties and thermal stability of the synthetic zinc formate dihydrate

Zinc formate dihydrate has been synthesized and characterized by powder X-ray diffraction, elemental analysis, FTIR spectra and thermal analysis. The molar heat capacity of the coordination compound was measured by a temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 200 to 330 K for the first time. The thermodynamic parameters such as entropy and enthalpy vs. 298.15 K based on the above molar heat capacity were calculated. The thermal decomposition characteristics of this compound were investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). TG curve showed that the thermal decomposition occurred in two stages. The first step was the dehydration process of the coordination compound, and the second step corresponded to the decomposition of the anhydrous zinc formate. The apparent activation energy of the dehydration step of the compound was calculated by the Kissinger method using experimental data of TG analysis. There are three sharply endothermic peaks in the temperature range from 300 to 650 K in DSC curve.     

Determination of heat capacities and thermodynamic properties of two structurally unrelated but isotypic calcium and manganese(II) 2,6-naphthalene dicarboxylate-based MOFs

Two metal-organic frameworks, Ca(2,6-NDC)(DMF) (1) and Mn₃(2,6-NDC)₃(DMF)₄ (2) (where 2,6-NDC = 2,6-naphthalene dicarboxylate and DMF = N,N′-dimethylformamide) have been solvothermally synthesized under optimized conditions and characterized by X-ray powder diffraction, elemental analysis, FT-IR spectroscopy, and TG analysis. The thermal decomposition characteristics were investigated under air atmosphere from 300 to 1,170 K (for 1) and from 300 to 971 K (for 2). The molar heat capacities were measured from 198 to 548 K (for 1) and from 198 to 448 K (for 2) by temperature modulated differential scanning calorimetry (TMDSC) for the first time. The fundamental thermodynamic parameters such as entropy and enthalpy variations with temperature were calculated based on the experimentally determined molar heat capacities.     

Heat capacities and thermodynamic properties of one manganese-based MOFs

A metal-organic framework [Mn(4,4′-bipy)(1,3-BDC)] _n (MnMOF, 1,3-BDC = 1,3-benzene dicarboxylate, 4,4′-bipy = 4,4′-bipyridine) has been synthesized hydrothermally and characterized by single crystal XRD and FT-IR spectrum. The low-temperature molar heat capacities of MnMOF were measured by temperature-modulated differential scanning calorimetry for the first time. The thermodynamic parameters such as entropy and enthalpy relative to reference temperature 298.15 K were derived based on the above molar heat capacity data. Moreover, the thermal stability and the decomposition mechanism of MnMOF were investigated by thermogravimetry analysis-mass spectrometer. A two-stage mass loss was observed in air flow. MS curves indicated that the gas products of oxidative degradation were H₂O, CO₂, NO, and NO₂.     

Synthesis,thermal, spectral and biological properties of zinc(II) 4-hydroxybenzoate complexes

New zinc(II) 4-hydroxybenzoate complex compounds with general formula [Zn(4-OHbenz)₂L_n]·xH₂O, where 4-OHbenz = 4-hydroxybenzoate; L = isonicotinamide, N-methylnicotinamide, N,N-diethylnicotinamide, thiourea, urea, phenazone, theophylline, methyl-3-pyridylcarbamate; n = 2, 3; x = 0–3, 5, were synthesized and characterised by elemental analysis, thermal analysis and IR spectroscopy. The thermal behaviour of the prepared compounds was studied by TG/DTG and DTA methods in argon atmosphere. The thermal decomposition of hydrated compounds started with dehydration. During the thermal decomposition, organic ligand, carbon monoxide, carbon dioxide and phenol were evolved. The final solid product of the thermal decomposition was zinc or zinc oxide. The volatile gaseous product, solid intermediate products and the final product of thermal decomposition were identified by IR spectroscopy, mass spectrometry, qualitative chemical analyses and X-ray powder diffraction method. The antimicrobial activity of zinc(II) carboxylate compounds was tested against various strains of bacteria, yeasts and filamentous fungi (S. aureus, E. coli, C. parapsilosis, R. oryzae, A. alternata, M. gypseum). The presence of zinc in complexes led to the increase in their antimicrobial activity in comparison with free 4-hydroxybenzoic acid.     

Crystal structure and thermodynamic properties of dipotassium diiron(III) hexatitanium oxide

In the present work, the temperature dependence of heat capacity of dipotassium diiron(III) hexatitanium oxide has been measured for the first time in the range from 10 to 300 K by means of precision adiabatic vacuum calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity $ C_{p}^{ \circ } (T) $ , enthalpy $ H^{ \circ } (T) - H^{ \circ } (0) $ , entropy $ S^{ \circ } (T) - S^{ \circ } (0), $ and Gibbs function $ G^{ \circ } (T) - H^{ \circ } (0) $ for the range from T → 0 to 300 K. The structure of K₂Fe₂Ti₆O₁₆ is refined by the Rietveld method: space group I4/m, Z = 1, a = 10.1344(2) Å, c = 2.97567(4) Å, V = 305.618(7) Å³. The high-temperature X-ray diffraction was used for the determination of coefficients of thermal expansion.     

Heat capacities and thermodynamic properties of M(HBTC)(4,4′-bipy)·3DMF (M?=?Ni and Co)

Two metal?Corganic frameworks (MOFs) of M(HBTC)(4,4??-bipy)·3DMF [M?=?Ni (for 1) and Co (for 2); H₃BTC?=?1,3,5-benzenetricarboxylic acid (1,3,5-BTC); 4,4??-bipy?=?4,4??-bipyridine; DMF?=?N,N??-dimethylformamide] were synthesized by a one-pot solution reaction and a solvothermal method, respectively, and characterized by powder X-ray diffraction and FT-IR spectra. The low-temperature molar heat capacities of M(HBTC)(4,4??-bipy)·3DMF were measured by temperature-modulated differential scanning calorimetry (TMDSC) for the first time. The thermodynamic parameters such as entropy and enthalpy relative to reference temperature 298.15?K were derived based on the above molar heat capacity data. Moreover, the thermal stability and the decomposition mechanism of M(HBTC)(4,4??-bipy)·3DMF were investigated by thermogravimetry analysis (TGA). The experimental results through TGA measurement demonstrate that both of the two compounds have a three-stage mass loss in air flow.     

Synthesis and thermal behaviors of 1,3-bis(4-aminophenoxy)benzene (TPER) and polyimide based on TPER and pyromellitic dianhydride

1,3-Bis(4-aminophenoxy)benzene (TPER) and poly(amic acid) based on TPER and pyromellitic dianhydride (PMDA) were synthesized. After imidization of the poly(amic acid), polyimide based on TPER and PMDA was obtained. The melting process and the specific heat capacity (C _p) of TPER were examined by DSC and microcalorimetry, respectively. The melting enthalpy, the melting entropy, and the C _p for TPER were obtained. The enthalpy change, the entropy change, and the Gibbs free energy change for TPER were obtained within 283 and 353 K. The thermal decomposition reaction mechanism of the polyimide is classified from the TG–DTG experimental data, and the thermokinetic parameters of the thermal decomposition reaction are E _a = 296.87 kJ mol^?1and log (A/s^?1) = 14.41.     

Fluoroferrate templated with HAmTAZ: X-ray single crystal,thermal behaviour,vibrational study and magnetic characterization

A new metal–organic compound FeF₆(HAmTAZ)₃ which (HAmTAZ = 3-amino-1,2,4-triazole) was hydrothermally synthesized from an equimolar mixture of FeF₂ and FeF₃ with HAmTAZ, aqueous HF and ethanol solvent at 410 K yielded a new hybrid class I fluoroferrate. The structure was characterized by single-crystal X-ray diffraction data. The crystal structure of FeF₆(HAmTAZ)₃ crystallizes in the trigonal system space group R3c with a = b = 12.5230 (6) Å, c = 18.5950 (16) Å, γ = 120° and Z = 6. The structure was built up from isolated octahedral FeF₆ separated by [HAmTAZ]⁺ cations. The thermal analysis has shown that the decomposition undergoes two steps between 475 and 775 K. IR and mass spectrometry have been used to confirm the presence of the organic molecule in the crystal lattice and determine the evacuated vapours during the decomposition, respectively. The magnetization of the title compound has no revealed any ferromagnetic component in the range of magnetic field from ?20 to 20 KOe at room temperature.     

Low-temperature heat capacities, and thermodynamic properties of solid–solid phase change material bis(1-octylammonium) tetrachlorocuprate

A new crystalline complex (C₈H₁₇NH₃)₂CuCl₄(s) (abbreviated as C₈Cu(s)) was synthesized by liquid phase reaction. Chemical analysis, elemental analysis, and X-ray crystallography were applied to characterize the composition and crystal structure of the complex. Low-temperature heat capacities of the complex were measured by a precision automatic adiabatic calorimeter over the temperatures ranging from 78 to 395 K, and two solid–solid phase changes appeared in the heat capacity curve. The temperatures, molar enthalpies and entropies of the two phase transitions of the complex were determined to be: T _{trs, 1} = 309.4 ± 0.35 K, Δ_trs H _{m, 1} = 16.55 ± 0.41 kJ mol^?1, and Δ_trs S _{m, 1} = 53.49 ± 1.3 J K^?1 mol^?1 for the first peak; T _{trs, 2} = 338.5 ± 0.63 K, Δ_trs H _{m, 2} = 6.500 ± 0.10 kJ mol^?1, and Δ_trs S _{m, 2} = 19.20 ± 0.28 J K^?1 mol^?1 for the second peak. Two polynomial equations of the heat capacities as a function of the temperature were fitted by least-square method. Smoothed heat capacities and thermodynamic functions of the complex relative to the standard reference temperature of 298.15 K were calculated based on the fitted polynomial equations.     

Thermal behavior and thermodynamic properties of berberine hydrochloride

The low-temperature heat capacities of berberine hydrochloride were measured over the temperature range from 78 to 350 K by an adiabatic calorimeter. The thermodynamic functions H _T ? H _298.15 and S _T ? S _298.15 were derived from the heat capacity data. The results showed that the structure of berberine hydrochloride was stable over the temperature range from 78 to 350 K. The thermal stability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained from adiabatic calorimetry experiment. The standard molar enthalpy of formation in the crystalline state of berberine hydrochloride was obtained from the standard molar energies of combustion in oxygen at T = 298.15 K, measured by a rotating-bomb combustion calorimeter.     

Synthesis, characterization, crystal and molecular structure analysis of N-(2,4-dimethylphenyl)-6-methyl-4-(3-nitrophenyl)-2-oxo-1,2,3,4-tetrahydropyrimidine-5-carboxamide

A novel dihydropyrimidine (DHPM) derivative bearing a carbamoyl moiety was synthesized by an efficient three-component Biginelli reaction and was characterized spectroscopically and finally confirmed by X-ray diffraction studies. The title compound C₂₀H₂₀N₄O₄ crystallizes in the monoclinic space group P2₁/c with cell parameters a=12.8970(12) Å, b=13.6210(11) Å, c=11.8420(13) Å, β=115.860(3)°, Z=4 and V=1872.0(3) Å³. The conformation of the dihydropyrimidine ring is unusual; it is planar instead of the usual boat-like conformation. The 3-nitrophenyl ring is orthogonal to the 3,4-DHPM ring. The carbonyl group is in an anti-clinal conformation.