Gallium-based thermal interface material with high compliance and wettability

This study reports a gallium-based thermal interface material (GBTIM) consisting of gallium oxides dispersed uniformly into the 99 % gallium metal. The wettability of GBTIM with other materials is disclosed and compared. The thermal conductivity of GBTIM measured by a computer-controlled Mathis TCi thermal analyzer is ～13.07 W?m^?1?K^?1 at room temperature, which is significantly higher than that of conventional thermal greases. An experimental facility is described to measure the thermal resistance across the GBTIM under steady-state conditions and the thermal interface resistance is measured as low as 2.6 mm²?kW^?1 with a pressure of 0.05 MPa, which is an order lower than that of the best commercialized thermal greases. Further, the GBTIM is formed into a desired shape to enhance thermal transfer, such as semi-liquid paste or thermal pad, which can be cut into a required shape.     

Electrosynthesis and characterization of poly aniline/garnet nanoparticles for high-performance electrochemical capacitors

In this work, supercapacitive performance of polyaniline/yttrium aluminum garnet (YAG: Y₃Al₅O₁₂) nanoparticles (PANI/YAGNPs) was studied. YAG nanoparticles were synthesized by pulse electro-deposition method and after that, PANI/YAGNPs electrodeposited on the surface of glassy carbon electrodes through cyclic voltammetry. Morphological studies show that YAG nanoparticles were distributed in the structure of PANI filaments uniformly. XRD and FTIR were used to perform a structural study of materials. Different electrochemical techniques such as cyclic voltammetry (CV), galvano static charge discharge (CD), and impedance spectroscopy (EIS) were used to evaluate the applicability of using PANI/YAGNPs as an active material for supercapacitors. The specific capacitance (SC) of PANI and PANI YAG NPs electrodes calculated using CV technique are 240 and 440 F/g, respectively. Increasing the conductivity and stability of composite electrodes during continuous CD cycles compared to PANI ones are some features of using YAG NPs in the structure of polymer electrodes. Stability of composite electrodes remains about 98% through 1000 continuous cycles whereas the polymeric electrode loses about 91% of its capacitance during this time range.     

Grain-size-dependent thermal conductivity of nanocrystalline materials

In order to study the influence of grain size and lattice strain on the thermal conductivity of nanocrystalline (NC) materials, both experimental and theoretical studies were carried out on NC copper. The NC copper samples were prepared by hot isostatic pressing of nano-sized powder particles with mean grain size of 30 nm. The thermal behaviors of the samples were measured to be 175.63–233.37 W (m K)^?1 by using a laser method at 300 K, which is 45.6 and 60.6 % of the coarse-grained copper, respectively. The average grain size lies in the range of 56–187 nm, and the lattice strain is in the range of ?0.21 to ?0.45 % (in the direction of 111) and ?0.09 to 0.92 % (in the direction of 200). In addition, a modified Kapitza resistance model was developed to study the thermal transport in NC copper. The theoretical calculations based on the presented theoretical model were in good agreement with our experimental results, and it demonstrated that the thermal conductivity of NC materials show obvious size effect. It is also evident that the decrease in the thermal conductivity of NC material can be mainly attributed to the nano-size effect rather than the lattice strain effect.     

Synthesis and characterization of conductive silver ink for electrode printing on cellulose film

Silver nanoparticles with size less than 50 nm were synthesized from silver nitrate, polyvinylpyrrolidone (PVP) and ethylene glycol, where these chemicals acted as metal precursor, stabilizer and reducing agent, respectively. Then a conductive silver ink was prepared with a suitable solvent by adding a viscosifier, hydroxyethyl-cellulose (HEC), and a surfactant, diethylene glycol (DEG). The combined effect of both viscosifier and surfactant on the physical property of the silver ink was analyzed by measuring the contact angle of the silver ink on a cellulose film. Moreover, the influences of PVP molecular weight and reaction temperature on the size of the silver nanoparticles were analyzed. Then the silver ink was coated on the cellulose film by spin coating and the effects of different solvents, sintering temperatures and solid contents on its electrical resistivity were examined. It was found that, with 50 % co-solvent of deionized water and DEG and solid content of around 50 %, the silver ink exhibited the lowest resistivity. This ink can be used for inkjet printing of conductive patterns on cellulose films.     

Green Synthesis of Silver Nanoparticles at Room Temperature Using Kiwifruit Juice

Comparing with physical and chemical methods, green synthesis techniques are emerging as facile and eco-friendly methods for the synthesis of silver nanoparticles. In this work, we demonstrated the biological synthesis of silver nanoparticles by the reduction of silver ions using kiwifruit juice as the reducing and stabilizing reagent. From the evidence of ultraviolet-visible spectroscopy and transmission electron microscopy, different sizes of silver nanoparticles were formed when the juice volume, reaction temperature, and reaction time were altered with respect to 0.01% silver acetate solution. The synthesized silver nanoparticles were stable for more than 1 month. Transmission electron microscopy studies showed the silver nanoparticles synthesized in room temperature have the diameters in the range of 5–25 nm. The proposed synthesis method is green and low cost, and the synthesized silver nanoparticles have potential bioanalytical applications.     

Microleakage and antibacterial properties of ZnO and ZnO:Ag nanopowders prepared via a sol–gel method for endodontic sealer application

A novel method, recently proved useful for the synthesis of nanoparticles, has been now used for the preparation of very stable silver iodide–trihexyl(tetradecyl)phosphonium chloride ionanofluids. Only the ionic liquid and the AgI bulk powder were needed. Synthesized nanofluids are much more stable than those obtained by simple dispersion of the nanoparticles in the base fluid. The ionanofluids were synthesized at different concentrations (up to 50 % w/w) and characterized in terms of physical, electrical, and thermal properties (density, viscosity, refractive index, electric conductivity, and specific heat capacity). A very high increase in the electric conductivity of the base ionic liquid was expected due to the high concentration of nanoparticles achieved. Nonetheless, it was not found, probably due to the reduction of ions mobility caused by the increase of the viscosity in ionanofluids with concentrations over 20 % w/w. An appropriate characterization of nanoparticles composing the nanofluids was carried out (UV–Vis absorbance, shape and size distribution). The diameter of the particles was measured and calculated by different techniques and approximations, obtaining a value of 2–4 nm. They were spherical, well-defined, and not agglomerated, with a narrow size distribution. The X-ray powder diffraction confirmed that no structural change took place in the transformation of the bulk solid to nanoparticles.     

Green synthesis of gold and silver nanoparticles using gallic acid: catalytic activity and conversion yield toward the 4-nitrophenol reduction reaction

In the present report, gallic acid was used as both a reducing and stabilizing agent to synthesize gold and silver nanoparticles. The synthesized gold and silver nanoparticles exhibited characteristic surface plasmon resonance bands at 536 and 392 nm, respectively. Nanoparticles that were approximately spherical in shape were observed in high-resolution transmission electron microscopy and atomic force microscopy images. The hydrodynamic radius was determined to be 54.4 nm for gold nanoparticles and 33.7 nm for silver nanoparticles in aqueous medium. X-ray diffraction analyses confirmed that the synthesized nanoparticles possessed a face-centered cubic structure. FT-IR spectra demonstrated that the carboxylic acid functional groups of gallic acid contributed to the electrostatic binding onto the surface of the nanoparticles. Zeta potential values of ?41.98 mV for the gold nanoparticles and ?53.47 mV for the silver nanoparticles indicated that the synthesized nanoparticles possess excellent stability. On-the-shelf stability for 4 weeks also confirmed that the synthesized nanoparticles were quite stable without significant changes in their UV–visible spectra. The synthesized nanoparticles exhibited catalytic activity toward the reduction reaction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The rate constant of the silver nanoparticles was higher than that of the gold nanoparticles in the catalytic reaction. Furthermore, the conversion yield (%) of 4-nitrophenol to 4-aminophenol was determined using reversed-phase high-performance liquid chromatography with UV detection at 254 nm. The silver nanoparticles exhibited an excellent conversion yield (96.7–99.9 %), suggesting that the synthesized silver nanoparticles are highly efficient catalysts for the 4-nitrophenol reduction reaction.     

Electrical properties, structure, and surface morphology of poly(p-xylylene)–silver nanocomposites synthesized by low-temperature vapor deposition polymerization

The crystalline structure, surface morphology, electrical, and optical properties of thin films of nanocomposites consisting of silver nanoparticles embedded in poly(p-xylylene) matrix prepared by low-temperature vapor deposition polymerization were studied. Depending on the filler content, the average size of silver nanoparticles varied from 2 to 5 nm for nanocomposites with 2 and 12 vol.% of silver, correspondingly. The optical adsorption in the visible region due to surface plasmon resonance also exhibited a clear correlation from silver content, revealing a red shift of the adsorption peak with the increase of the metal concentration. The temperature dependences of the dc resistance of pure p-xylylene condensate and p-xylylene–silver cocondensates during polymerization as well as temperature dependences of the formed poly(p-xylylene)–silver nanocomposites were examined. The observed variation of the temperature dependences of electrical resistance as a function of silver concentration are attributed to different conduction mechanisms and correlated with the structure of the composites. The wide-angle X-ray scattering and AFM measurements consistently show a strong effect of silver content on the nanocomposite structure. The evolution of the size of silver nanoparticles by thermal annealing was demonstrated.     

Effect of temperature on the synthesis of silver nanoparticles with polyethylene glycol: new insights into the reduction mechanism

Polyethylene glycol (PEG) molecules act as a reducing and stabilizing agent in the formation of silver nanoparticles. PEG undergoes thermal oxidative degradation at temperatures over 70 °C in the presence of oxygen. Here, we studied how the temperature and an oxidizing atmosphere could affect the synthesis of silver nanoparticles with PEG. We tested different AgNO₃ concentrations for nanoparticles syntheses using PEG of low molecular weight, at 60 and 100 °C. At the higher temperature, the reducing action of PEG increased and the effect of PEG/Ag⁺ ratio on nanoparticles aggregation changed. These results suggest that different synthesis mechanisms operate at 60 and 100 °C. Thus, at 60 °C the reduction of silver ions can occur through the oxidation of the hydroxyl groups of PEG, as has been previously reported. We propose that the thermal oxidative degradation of PEG at 100 °C increases the number of both, functional groups and molecules that can reduce silver ions and stabilize silver nanoparticles. This degradation process could explain the enhancement of PEG reducing action observed by other authors when they increase the reaction temperature or use a PEG of higher molecular weight     

A composite theoretical model for the thermal conductivity of nanocrystalline materials

In order to study the thermal conductivity of nanocrystalline (NC) materials, a two-phase composite model consisting of grain interior (GI) regarded as an ordered crystal phase and plastically softer grain boundary-affected zone (GBAZ) phase was presented. The effects of GI and GBAZ on thermal conduction were considered, respectively. In this work, time independent Schrodinger’s wave equation (TISWE) was used to study the carriers’ transmission in a crystal particle, through which we can get the thermal conductivity of the GBAZ. The thermal conductivity of GI was calculated based on a kinetic theory. The whole effective grain thermal conductivity was simulated by a modified formula for composite materials. The results showed that as the grain size decreases to 80 nm, it has a strong size effect, and the thermal conductivity decreases with the decreasing of grain size.     

Continuous synthesis of colloidal silver nanoparticles by electrochemical discharge in aqueous solutions

This article presents an electrochemical discharge (ECD) method that consists of a combination of chemical methods and electric arc discharges. In the method, 140 V is applied to an Ag electrode from a DC power supply. The arc-discharge between the electrodes produces metallic silver nanoparticles and silver ions in the aqueous solution. Compared with the original arc discharge, this ECD method creates smaller nanoparticles, prevents clumping of the nanoparticles, and shortens the production time. The citrate ions also reduce the silver ions to silver nanoparticles. In addition, the citrate ions cap the surface of the produced silver nanoparticles and the zeta potential increases. In this article, the weight loss of the electrodes and the reduction of silver ions to silver nanoparticles as a function of citrate concentration and electric conductivity of the medium are discussed. Furthermore, the properties of the colloidal silver prepared with ECD are analyzed by UV–Vis spectroscopy, dynamic light scattering, electrophoresis light scattering, and scanning electron microscopy. Finally, a continuous production apparatus is presented for the continuous production of colloidal silver.     

疏导式结构在头锥热防护中的应用

针对高超声速飞行器工作时头锥恶劣的热环境,为了保证飞行器头锥的尖锐外形, 提出疏导式热防护结构,利用内置高导热碳材料结构为飞行器头锥提供热防护. 采用流固耦合方法对头锥疏导式防热结构进行了分析,验证了头锥内置高导热碳材料具有较好防热效果, 其中来流马赫数(Ma)为9时头锥前缘壁面最高温度下降了21.9%,尾部最低温度升高了15.2%, 实现了热流由高温区向低温区的转移,削弱了头锥的热载荷,强化了头锥的热防护能力. 本文对外蒙皮结构参数、材料参数以及内部高导热碳材料导热率对头锥热防护性能的影响进行了分析, 其中头锥最高温度随着蒙皮材料导热系数的增加而降低到一个稳定值; 随着蒙皮材料表面黑度的增加而降低;随着蒙皮厚度的增加而升高;随着高导热碳材料导热系数的 增加而呈抛物线下降.     

Experimental Investigation on the Thermal Conductivity and Viscosity of Silver-Deionized Water Nanofluid

Abstract

This article presents an experimental investigation where the thermal conductivity and viscosity of silver-deionized water nanofluid is measured and studied. The mixture consists of silver nanoparticles of 0.3, 0.6, and 0.9% of volume concentrations and studied for temperatures between 50°C and 90°C. The transient hot-wire apparatus and Cannon-Fenske viscometer are used to measure the thermal conductivity and kinematic viscosity of nanofluid, respectively. The thermal conductivity increases with the increase in temperature and particle concentrations. A minimum and maximum enhancement of 27% at 0.3 vol% and 80% at 0.9 vol% are observed at an average temperature of 70°C. The viscosity decreases with the increase in temperature and increases with the increase in particle concentrations. The effect of Brownian motion and thermophoresis on the thermo-physical properties is discussed. Thus, an experimental correlation for thermal conductivity and viscosity, which relates the volume concentration and temperature, is developed, and the proposed correlation is found to be in good agreement with the experimental results.     

Facile synthesis of ultrafine SnO<Subscript>2</Subscript> nanoparticles on graphene nanosheets via thermal decomposition of tin-octoate as anode for lithium ion batteries

We demonstrate a facile synthesis of ultrafine SnO₂ nanoparticles within graphene nanosheets (GNSs) via thermal decomposition of tin-octoate, in which tin-octoate is firstly blended with GNSs followed by annealing in air at a low temperature (350 °C) and a short time (1 h). As anode for lithium ion batteries, the SnO₂/GNSs displays superior cycle and rate performance, delivering reversible capacities of 803 and 682 mA h/g at current densities of 200 and 500 mA/g after 120 cycles, respectively, much higher than that of pure SnO₂ and GNSs counterparts (143 and 310 mA h/g at 500 mA/g after 120 cycles, respectively). The enhanced electrochemical performance is attributed to the ultrafine SnO₂ nanoparticle size and introduction of GNSs. GNSs prevent the aggregation of the ultrafine SnO₂ nanoparticles, which alleviate the stress and also provide more electrochemically active sites for lithium insertion and extraction. Moreover, GNSs with large specific surface area (~363 m²/g) act as a good electrical conductor which greatly improves the electrode conductivity and also an excellent buffer matrix to tolerate the severe volume changes originated from the Li-Sn alloying-dealloying. This work provides a straight-forward synthetic approach for the design of novel composite anode materials with superior electrochemical performance.     

Particle size effect on thermal conductivity of AlN films with embedded diamond particles

Fabricating composite thin films is an effective and economic solution to improve the thermal performance of the films. The diamond particles of different sizes were successfully embedded in AlN thin films by a chemical solution approach, which was confirmed by scanning electron microscope, x-ray diffraction analysis and x-ray photoelectron spectroscopy. The thermal properties of the films embedded with different diamond particles were studied by using a 3-omega method, which was observed to be strongly dependent on the particle size. A 19 % enhancement in thermal conductivity can be achieved by embedding diamond particles of 1-μm radius in AlN thin films. However, the thermal conductivity decreases after embedding with 10-nm radius diamond particles. The results are discussed with high volume model, which confirms that the interface thermal resistance between the embedded materials and the films plays an important role in determining the thermal conductivity of the as-grown carbon material embedded AlN films.     

On the thermal expansion of CNT/Cu composites for electronic packaging applications

Carbon nanotubes (CNTs) exhibit both excellent high thermal conductivity and low coefficient of thermal expansion (CTE), which are an ideal reinforcement in composite materials for high performance electronic packaging applications. In the present study, CNT/Cu composites containing CNTs varying from 0 vol.% to 15 vol.% are prepared, and their CTE behavior is studied in detail. The results indicate that the CTE of 0–10 vol.% CNT/Cu composites is significantly decreased with increasing CNT content. However, as the CNT content increases to 15 vol.%, the decrease in CTE of the composites is pronouncedly reduced. Possible mechanisms are discussed in combination with CTE model predictions.     

Ecologically friendly xanthan gum-PVA matrix for solid polymeric electrolytes

Two water-soluble and biodegradable polymers: xanthan gum (XG) and poly(vinyl alcohol) (PVA) were used to synthesize ecologically friendly solid polymer electrolyte (SPE) matrices. While XG is a natural polymer, PVA is a synthetic one, but both are colorless and form transparent membranes. To obtain ionic conductivity properties, the samples were doped with acetic acid and characterized by electrochemical impedance spectroscopy (EIS), X-ray diffraction, UV-Vis spectroscopy, and tensile test. The best results of ionic conductivity of 1.97 × 10^?4 and 7.41 × 10^?4 S/cm at room temperature and 80 °C, respectively, were obtained for the sample containing 55 wt% of acetic acid. Moreover, this electrolyte was found to be predominantly amorphous with transmittance in the visible region of 80% and absorbance values below 0.5 between 240 and 375 nm. Tensile test of this sample, applied up to 18 N of maximum force, resulted in strain of 2322% and Young’s modulus of 0.02 MPa. The obtained results showed that these new eco-friendly materials are promising for use as electrolytes in electrochemical devices.     

Novel Cu–Cr alloy matrix CNT composites with enhanced thermal conductivity

Carbon nanotubes (CNTs) are incorporated into the Cu–Cr matrix to fabricate bulk CNT/Cu–Cr composites by means of a powder metallurgy method, and their thermal conductivity behavior is investigated. It is found that the formation of Cr₃C₂ interfacial layer improves the interfacial bonding between CNTs and Cu–Cr matrix, producing a reduction of interfacial thermal resistance, and subsequently enhancing the thermal conductivity of the composites. The thermal conductivity of the composites increases by 12 % and 17 % with addition of 5 vol.% and 10 vol.% CNTs, respectively. The experimental results are also theoretically analyzed using an effective medium approximation (EMA) model, and it is found that the EMA model combined with a Debye model can provide a satisfactory agreement to the experimental data.     

Electrical and electrochemical properties of SrBiMTiO<Subscript>6</Subscript> (M = Fe,Mn, Cr) as potential cathodes for solid oxide fuel cells

A series of perovskite oxides SrBiMTiO₆ (M = Fe, Mn, Cr) have been synthesized and characterized towards application as cathode materials for solid oxide fuel cells (SOFCs). X-ray diffraction (XRD) patterns reveal that all samples are stabilized in \( \mathrm{Pm}\ \overline{3}\mathrm{m} \) space group. Electrical conductivity, AC impedance characteristics, and thermal and chemical stability have been studied in order to assess their possible use as SOFC cathode materials. In comparison with other low electrical conductivity cathodes of SOFC, our results suggest that SrBiMnTiO₆, which has the highest electrical conductivity (4.02 S cm^?1) and moderate polarization resistance (0.104 Ω cm²) at 850 °C, is the most promising candidate among the three perovskite oxides for further study and optimization as a SOFC cathode material.     

Cerium oxide nanoparticles protect primary mouse bone marrow stromal cells from apoptosis induced by oxidative stress

The sintering of a silver (Ag) nanoparticle film by laser beam irradiation was studied using a CW DPSS laser. The laser sintering of the Ag nanoparticle thin film gave a transparent conductive film with a thickness of ca. 10 nm, whereas a thin film sintered by conventional heat treatment using an electronic furnace was an insulator because of the formation of isolated silver grains during the slow heating process. The laser sintering of the Ag nanoparticle thin film gave a unique conductive network structure due to the rapid heating and quenching process caused by laser beam scanning. The influences of the laser sintering conditions such as laser scan speed on the conductivity and the transparency were studied. With the increase of scan speed from 0.50 to 5.00 mm/s, the surface resistivity remarkably decreased from 4.45 × 10⁸ to 6.30 Ω/sq. The addition of copper (Cu) nanoparticles to silver thin film was also studied to improve the homogeneity of the film and the conductivity due to the interaction between the oxidized surface of Cu nanoparticle and a glass substrate. By adding 5 wt% Cu nanoparticles to the Ag thin film, the surface resistivity improved to 2.40 Ω/sq.