Signal amplification and detection via a supramolecular allosteric catalyst

The design of a supramolecular allosteric catalyst system for catalytic signal amplification and detection is presented. The catalyst was switched "on" by the introduction of an analyte that also behaves as an allosteric activator. Concentrations of Cl- ions as low as 800 nM were catalytically amplified and detected. The signal was transduced via a pH-sensitive fluorescent probe and observed visually using a laboratory, handheld UV lamp and by spectrophotometry. Furthermore, the allosteric effect was quantified using gas chromatography for a range of Cl- concentrations. This three-part detection scheme involving analyte binding, allosteric catalyst activation, and signal transduction represents a new approach to small-molecule detection.     

Supramolecular allosteric cofacial porphyrin complexes

Nature routinely uses cooperative interactions to regulate cellular activity. For years, chemists have designed synthetic systems that aim toward harnessing the reactivity common to natural biological systems. By learning how to control these interactions in situ, one begins to allow for the preparation of man-made biomimetic systems that can efficiently mimic the interactions found in Nature. To this end, we have designed a synthetic protocol for the preparation of flexible metal-directed supramolecular cofacial porphyrin complexes which are readily obtained in greater than 90% yield through the use of new hemilabile porphyrin ligands with bifunctional ether-phosphine or thioether-phosphine substituents at the 5 and 15 positions on the porphyrin ring. The resulting architectures contain two hemilabile ligand-metal domains (RhI or CuI sites) and two cofacially aligned porphyrins (ZnII sites), offering orthogonal functionalities and allowing these multimetallic complexes to exist in two states, "condensed" or "open". Combining the ether-phosphine ligand with the appropriate RhI or CuI transition-metal precursors results in "open" macrocyclic products. In contrast, reacting the thioether-phosphine ligand with RhI or CuI precursors yields condensed structures that can be converted into their "open" macrocyclic forms via introduction of additional ancillary ligands. The change in cavity size that occurs allows these structures to function as allosteric catalysts for the acyl transfer reaction between X-pyridylcarbinol (where X = 2, 3, or 4) and 1-acetylimidazole. For 3- and 4-pyridylcarbinol, the "open" macrocycle accelerates the acyl transfer reaction more than the condensed analogue and significantly more than the porphyrin monomer. In contrast, an allosteric effect was not observed for 2-pyridylcarbinol, which is expected to be a weaker binder and is unfavorably constrained inside the macrocyclic cavity.     

Bidentate ligands formed by self-assembly

A novel supramolecular strategy to prepare bidentate ligands via the assembly of functionalised monomeric ligands on a dimeric zinc(II) porphyrin template is presented; the assembled bidentate ligands show chelating behaviour and their rhodium complexes display enhanced selectivity in the hydroformylation compared to the non-template analogue.     

Conformationally restricted dynamic supramolecular catalysts for substrate-selective epoxidations

A second generation of a substrate-selective dynamic supramolecular catalytic system consisting of a catalyst part and a receptor part, connected by a hydrogen-bonding motif, has been realized based on rational design. The results from analyses of the equilibrium mixture of the species generated by the components of the first generation system led us to selectively lock the cisoid conformation of the catalyst part to increase the amount of the substrate-selective catalytic cavity in the equilibrium mixture. This was realized by strapping the catalyst part by organic synthesis. This strapping led to an increase in substrate selectivity in the pair-wise competitive epoxidations of pyridyl- vs. phenyl-appended styrenes and pyridyl- vs. phenyl-appended stilbenes of both Z- and E- configuration compared to the first generation system, reaching 3.4 : 1 as the highest substrate selectivity for Z-mono-pyridyl-stilbene (27a) vs. the corresponding all-carbon analogue (28a) and for E-dipyridyl-stilbene (26b) vs. the corresponding all-carbon analogue (28b), respectively.     

Monolayers of salen derivatives as catalytic planes for alkene oxidation in water

Monolayers at the gas/water interface have been used as an adjustable catalytic system in which the molecular density may be modified. Mn(III)-salen complexes bearing perfluoroalkyl substituents have been organized as a Langmuir film on an aqueous subphase containing a urea/hydrogen peroxide adduct (UHP, the oxidant) and cinnamyl alcohol (the substrate). The catalytic activity of the monolayer for the epoxidation of the alkene dissolved in water has been demonstrated and the reaction kinetic investigated. For a constant area per molecule of catalyst, the reaction rate exhibits first-order dependence on oxidant concentration and zero-order dependence on alkene concentration, in agreement with the reaction orders reported for Mn(III)-salen-catalyzed epoxidation reactions carried out in solution. Furthermore, kinetic experiments suggest an enhanced activity of the catalysts assembled in a Langmuir film relative to that observed in bulk reaction. Finally, varying the molecular density of the catalyst at the gas/water interface highlights an important dependence of the catalytic activity of the layer with the mean molecular area. A strong increase of the catalytic properties of the monolayer was observed for a mean molecular area of 140-145 A2, an increase which was supposedly related to a modification of the Mn(III)-salen complex orientation at the interface upon compression. This hypothesis was supported by PM-IRRAS (polarization modulation infrared reflection adsorption spectroscopy) experiments performed in situ on the monolayer. Such results demonstrate that a soft and adjustable molecular system like a Langmuir film can be used to better understand the reactivity in various heterogeneous and/or pseudohomogeneous (such as those based on dendrimers) catalytic systems.     

Direct Quantitative Estimation of the Macrocyclic Effect in the Dissociation of Protoporphyrin Complexes

(Chloro)platinum(III)protoporphyrin and its closest noncyclic analogue, platinum(III)biliverdin, are synthesized; the forms and stability of the complexes in proton-donating solutions as dependent on temperature and solvent composition are studied. The macrocyclic effect (the effect of coordinated macrocyclic ligand opening) is directly estimated quantitatively; a correlation between its contribution to the rate of dissociation (or stability) of the complexes and their structures is found.     

Shell cross-linked micelle-based nanoreactors for the substrate-selective hydrolytic kinetic resolution of epoxides

Shell cross-linked micelles (SCMs) containing Co(III)-salen cores were prepared from amphiphilic poly(2-oxazoline) triblock copolymers. The catalytic activity of these nanoreactors for the hydrolytic kinetic resolution of various terminal epoxides was investigated. The SCM catalysts showed high catalytic efficiency and, more significantly, substrate selectivity based on the hydrophobic nature of the epoxide. Moreover, because of the nanoscale particle size and the high stability, the catalyst could be recovered easily by ultrafiltration and reused with high activity for eight cycles.     

Integration of on-column catalysis and EKC analysis: investigation of enantioselective sulfoxidations

A novel technique is presented to investigate catalytic reactions by coupling a fused-silica capillary coated with an immobilized catalyst and a bare fused-silica capillary to achieve separation of the reaction products and to generate an electroosmotic flow, which drives the transport of the reactants and products through the catalytically active capillary. The principle of this technique is illustrated by the enantioselective sulfoxidation of benzylphenylsulfide with hydrogen peroxide to the corresponding sulfoxide in the presence of a vanadium(IV)-salen catalyst, which is immobilized to nonpolar polysiloxane and permanently bonded to the inner surface of the reaction capillary. The enantiomeric ratio of the reaction product is simultaneously determined by electrokinetic chromatography using 150 mg/mL sulfated β-cyclodextrin as chiral additive in 10 mM sodium dihydrogenphosphate background electrolyte at pH 8.3. In contrast to conventional enantioselective sulfoxidations of benzylphenylsulfide using the vanadium(IV)-salen catalyst, which give ees of up to 11%, an ee of up to 23% was achieved by this approach. Furthermore, the presented technique offers many more advantages, such as improved substrate selectivity using the nonpolar polysiloxane phase as a solvent, the feasibility to perform high-throughput kinetic measurements of substrate libraries, rapid screening and investigation of stereolabile compounds, that is, chiral sulfoxides, and screening of reactions using only minute amounts of reagents.     

Design, preparation, and study of catalytic gated baskets

We report a diastereoselective synthetic method to obtain a family of catalytic molecular baskets containing a spacious cavity (~570 ?(3)). These supramolecular catalysts were envisioned, via the process of gating, to control the access of substrates to the embedded catalytic center and thereby modulate the outcome of chemical reactions. In particular, gated basket 1 comprises a porphyrin "floor" fused to four phthalimide "side walls" each carrying a revolving aromatic "gate". With the assistance of (1)H NMR and UV-vis spectroscopy, we demonstrated that the small 1-methylimidazole guest (12, 94 ?(3)) would coordinate to the interior while the larger 1,5-diadamantylimidazole guest (14, 361 ?(3)) is relegated to the exterior of basket Zn(II)-1. Subsequently, we examined the epoxidation of differently sized and shaped alkenes 18-21 with catalytic baskets 12(in)-Mn(III)-1 and 14(out)-Mn(III)-1 in the presence of the sacrificial oxidant iodosylarene. The epoxidation of cis-stilbene occurred in the cavity of 14(out)-Mn(III)-1 and at the outer face of 12(in)-Mn(III)-1 with the stereoselectivity of the two transformations being somewhat different. Importantly, catalytic basket 14(out)-Mn(III)-1 was capable of kinetically resolving an equimolar mixture of cis-2-octene 20 and cis-cyclooctene 21 via promotion of the transformation in its cavity.     

Statistical model of stereospecific polymerization of vinyl monomers

A statistical model for the stereospecific polymerization of vinly monomers on Ziegler-Natta catalytic systems is presented. The basic assumptions of the model are: (a) the catalytic centers are asymmetric, so that at a given catalytic center the monomer CH₂?CHR is inserted into the chain with two different rates according to the two different configurations of the opening carbon atom having the R group; (b) the insertion of a monomeric unit in the growing chain is affected also by interactions with the previous monomeric unit. Isotactic, syndiotactic, atatic, or stereoblock polymers are obtained according to the relative values of the two energy parameters expressing these two effects.     

Allosterically regulated supramolecular catalysis of acyl transfer reactions for signal amplification and detection of small molecules

The advent of methods for the construction of supramolecular assemblies provides a route to exploring the benefits of artificial allosteric catalysts. To expand our ability to control reactions using supramolecular catalysts capable of changing shape in response to chemical input signals, we report the development and high yield syntheses of multidomain modular supramolecular catalysts. These structures can be chemically interconverted between relatively inactive and catalytically active states depending on their shape. Furthermore, this class of supramolecular catalysts can be made to respond to a range of analytes via the introduction of specific structure control elements responsible for binding analyte molecules. Herein, we describe several of these catalysts and their ability to regulate acyl transfer reactions allosterically. In addition, the generality of this approach to signal amplification and detection is examined by incorporating the acyl transfer reaction into a small molecule detection scheme consisting of (i) analyte binding to structure control sites of the catalytic supramolecular assemblies, (ii) enhanced catalytic activity turned on by the resulting shape change, thereby allowing for signal amplification of the binding event, and (iii) signal detection by analysis of the products of the catalytic reaction.     

Cycloaddition Reactions of an Active Cyclic Phosphane/Borane Pair with Alkenes,Alkynes, and Carbon Dioxide

The active six-membered cyclo-FLP 6 undergoes a rapid P/B addition reaction to carbon dioxide. At elevated temperature, the resulting heterobicyclo[2.2.2]octane derived product 7 undergoes ring opening and equilibrates with the cyclotetramer (7)₄ . In the large macrocyclic structure, four monomeric six-membered cyclo-FLP units are connected by four CO₂ molecules to form the supramolecular ring system. The P/B cyclo-FLP 6 undergoes a variety of additional cycloaddition reactions.     

What is the role of acid–acid interactions in asymmetric phosphoric acid organocatalysis? A detailed mechanistic study using interlocked and non-interlocked catalysts

Organocatalysis has revolutionized asymmetric synthesis. However, the supramolecular interactions of organocatalysts in solution are often neglected, although the formation of catalyst aggregates can have a strong impact on the catalytic reaction. For phosphoric acid based organocatalysts, we have now established that catalyst–catalyst interactions can be suppressed by using macrocyclic catalysts, which react predominantly in a monomeric fashion, while they can be favored by integration into a bifunctional catenane, which reacts mainly as phosphoric acid dimers. For acyclic phosphoric acids, we found a strongly concentration dependent behavior, involving both monomeric and dimeric catalytic pathways. Based on a detailed experimental analysis, DFT-calculations and direct NMR-based observation of the catalyst aggregates, we could demonstrate that intermolecular acid–acid interactions have a drastic influence on the reaction rate and stereoselectivity of asymmetric transfer-hydrogenation catalyzed by chiral phosphoric acids.

Supramolecular acid–acid interactions lead to competing monomeric and dimeric pathways in phosphoric acid catalysis – so that stereoselectivities depend on catalyst concentration.     

PCR-like cascade reactions in the context of an allosteric enzyme mimic

A supramolecular allosteric catalyst that exhibits a PCR-like cascade reaction is reported. The complex is triggered by a reaction with an acetate ion, which turns on a catalytic cascade that exponentially increases acetate ion concentration through an acyl transfer reaction.     

Chromium(III) complexes for photochemical nitric oxide generation from coordinated nitrite: synthesis and photochemistry of macrocyclic complexes with pendant chromophores, trans-[Cr(L)(ONO)(2)]BF(4)

Several new dinitritochromium(III) complexes of the type trans-[Cr(L)(ONO)(2)]BF(4), where L is a derivative of the macrocyclic ligand cyclam having pendant aromatic chromophores attached (L = 5,7-dimethyl-6-(substituted)-1,4,8,11-tetraazacyclotetradecane), have been prepared and characterized. Photoexcitation of aqueous solutions containing these complexes at wavelengths corresponding to the pendant chromophore absorption bands led to the generation of NO as detected by an electrochemical sensor. Photophysical data show that the expected fluorescence of the pendant chromophores is largely quenched when the macrocyclic ligand is coordinated to these Cr(III) centers, and this is interpreted in terms of fast energy transfer processes from the ligand-centered pipi states to the Cr(III)-centered ligand field states leading to subsequent cleavage of the Cr(III)-coordinated nitrito ligand. Thus, the chromophores tethered to the coordinated cyclam serve as light-gathering antennae for the intramolecular sensitization of the NO-generating photoreactions at the metal center.     

三苯甲基取代烯烃的环氧化研究

合成了6种三苯甲基取代烯烃. 以二甲基二氧杂环丙烷作为主要氧化剂, 在催化剂(R,R)-Salen Mn(III)的催化下, 进行不对称环氧化, 其不对称环氧化产物ee值较高(81%). 初步研究表明, 二甲基二氧杂环丙烷(DMD)和(R,R)-Salen Mn(III)的环氧化体系对于含亚甲基的三苯甲基取代的烯烃的氧化产率高但对映选择性差, 对于不含亚甲基的三苯甲基取代的烯烃的氧化产率低但对映选择性好.     

Synthesis of steroid-biaryl ether hybrid macrocycles with high skeletal and side chain variability by multiple multicomponent macrocyclization including bifunctional building blocks

Utilizing the multiple multicomponent macrocyclization including bifunctional building blocks (MiB) strategy, a library of nonracemic, nonrepetitive peptoid-containing steroid-biaryl ether hybrid macrocycles was built. Up to 16 new bonds, including those of the macrocyclization, can be formed in one pot simultaneously while introducing varied elements of diversity. Functional diversity is generated primarily by choosing Ugi-reactive functional building blocks, bearing the respective recognition or catalytic motifs. These appear attached to the peptoid backbone of the macrocyclic cavity, similar to side chains of amino acids found in enzyme active sites. Likewise, skeletal diversity is based on the variation of defined bifunctional building blocks which allow the parallel formation of macrocyclic cavities that are highly diverse in shape and size and thus perspectively in function. This straightforward approach is suitable to generate multifunctional macrocycles for applications in catalysis, supramolecular, or biological chemistry.     

Construction and Activity of a New Catalytic System in the Hydrolysis of Bis(4‐nitrophenyl) Phosphate Ester

A new catalytic system containing an unsaturated heterocyclic nitrogen ligand and lanthanum(III) was constructed and used as a catalyst in the hydrolysis of bis(4‐nitrophenyl) phosphate ester (BNPP) in this work. The results indicated that this catalytic system showed greater catalytic activity in the hydrolysis of BNPP and better reproducibility and stability than other similar lanthanum(III) systems. The catalytic rate of the BNPP hydrolysis was about 10⁷‐fold faster than that of its spontaneous hydrolysis at the same conditions. Compared with the previous Cu(II) or Ni(II) complex containing the same ligand in the water, the activity of the macrocyclic La(III) complex increases ca. 10³‐fold for BNPP catalytic hydrolysis. The experimental data showed that the monohydroxy complex made of the heterocyclic nitrogen ligand and lanthanum(III) is the real active species as a catalyst in BNPP catalytic hydrolysis.     

Self-assembly of dialkyltin(IV) moieties and aromatic dicarboxylates to complexes with a polymeric or a discrete trinuclear macrocyclic structure in the solid state and a mixture of fast interchanging cyclooligomeric structures in solution

It is well-known that the structures of trialkyltin(IV) carboxylates can be either monomeric, polymeric, or cyclooligomeric in the solid state. In contrast, all dialkyltin(IV) dicarboxylates characterized so far in the solid state have monomeric or polymeric structures, however, for some cases it has been proposed that their solution-state structure is cyclooligomeric. In order to generate more information on this subject, dimethyl- and di-n-butyltin(IV) complexes with phthalic and isophthalic acid have been prepared and analyzed both in solution and in the solid state. The solid-state structures of the two dialkyltin(IV) phthalates examined herein contain polymeric molecular chains, however, with supramolecular Sn.O' interactions, which result in the generation of cyclooligomeric units. This provides evidence for the presence of discrete cyclooligomeric structures in solution, which are involved in fast dynamic exchange equilibria as evidenced by (1)H, (13)C, and (119)Sn NMR spectroscopy. In the case of the two dialkyltin(IV) isophthalate complexes studied herein (R = Me, n-Bu), only the di-n-butyltin derivative is soluble and NMR spectroscopy as well as FAB(+) spectrometry indicates the formation of cyclic dinuclear, trinuclear, and/or tetranuclear species in solution, which may be involved also in fast dynamic exchange equilibria. In the solid state, however, discrete cyclotrinuclear units can be identified, in which the 24-membered macrocyclic cavity is almost completely planar, having six oxygen atoms directed into its interior and six Sn-n-butyl groups approximately perpendicular to the molecular plane. The diameter of the cyclic cavity can be described by the transannular O.O distances that vary from 7.68 to 7.84 A, being large enough for the introduction of linear alkyl groups. This can be demonstrated by the supramolecular structure of this compound, which contains a new type of bis[2]pseudorotaxane formed between two molecules through mutual threading via two of the Sn-butyl groups. Such a supramolecular entity has been unknown so far, since the usual composition of bis[2]pseudorotaxanes is the trimolecular combination of a macrocyclic ring system with two threads.     

Variations of structure and active species in mesoporous Cr-MSU-x catalyst during the dehydrogenation of ethane with CO<Subscript>2</Subscript>

The dehydrogenation of ethane to ethylene under CO₂ over mesoporous Cr-MSU catalyst was investigated with respect to the time on-stream behavior. When ethane was allowed to react for about 240 min, the meso-structure of catalyst remained nearly unchanged in spite of some decrease of surface area. The Cr(VI) species in tetrahedral coordination in fresh Cr-MSU were reduced to Cr(III) species in octahedral coordination, that was expected to cause the activity decrease of catalyst, together with the structure change. Cr(VI) is more active than Cr(III) for ethane dehydrogenation with CO₂, but Cr(III) represent fairly stable active centers for the reaction. The article is published in the original.