Rhodium complexation with phosphoryl-containing calix[4]resorcine

Complexation of rhodium compounds with phosphoryl-containing calix[4]resorcine in ethanol and acetone has been considered. The structure and properties of the synthesized complexes have been studied by IR and Raman spectroscopy, ¹H and ³¹P NMR, EPR, UV-Vis spectroscopy, and TG/DSC. The effect of the solvent nature and conformation of a macrocyclic ligand on the structure of the resulting complexes has been observed. It has been demonstrated that one of the key factors responsible for complexation in EtOH is self-association of the ligand without the participation of the solvent. Complex formation in acetone is determined by its high ionizing ability. In diamagnetic complexes, the macrocyclic ligand is coordinated to the central atom through the phosphoryl oxygen atoms. For triaquatrichlororhodium in an aprotic medium, coordination occurs through the oxygen atoms of resorcinol moieties, which is accompanied by the formation of resorcinol radical anion and conversion of the diethoxyphosphorylaryl groups into ethoxyhydroxyphosphorylaryl moieties.     

四-(p-羟基苯基)杯[4]间苯二酚芳烃的烃基化和酰胺化反应

间苯二酚和对羟基苯甲醛在盐酸/乙醇中缩合生成四-(p-羟基苯基)杯[4]间苯二酚芳烃(1), 在K₂CO₃/丙酮体系中将1分别与溴乙酸乙酯、溴丙烯、N,N-二丙基氯乙酰胺反应可得到全氧烃基化产物2a～2c. 含有12个乙氧基羰基甲氧基支链的2a被苯乙胺、N,N-二甲基二丙胺或三乙烯四胺直接胺解生成杯[4]间苯二酚芳烃酰胺衍生物3a～3c. 2a经过碱性水解、酰氯化、胺化反应转化为含吡啶基的酰胺衍生物3d. 化合物结构都用¹H NMR, IR和元素分析等方法进行了表征.     

Binding of 1,5-bis(p-sulfonatophenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane with tetra(methyl viologen) calix[4]resorcinol

Binding of an amphiphilic dianion 1,5-bis(p-sulfonatophenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane (APCO^2?) with an amphiphilic octacation tetra(methyl viologen) calix[4]resorcinol (MVCA⁸⁺) in media containing different amounts of water and DMSO using NaClO₄ or NaCl as supporting electrolytes was shown for the first time by cyclic voltammetry and spectrophotometry. The stoichiometry of the complex depends on the MVCA⁸⁺: APCO^2? ratio, medium, and supporting electrolyte. A 1: 1 charge-transfer complex is mainly formed (λ_max = 480 nm) in 30% DMSO at a ratio of the compounds of 1: 1. A similar 1: 1 complex of APCO^2? with a model compound methyl viologen MV²⁺ (λ_max = 482 nm) is formed under these conditions. A donor-acceptor interaction occurs between the acceptor viologen units and nitrogen-centered electron-donating fragments of the APCO^2? dianion. An increase in the content of APCO^2? in the solution leads to an additional binding of one (30 vol.% DMSO, water, NaClO₄) or two (30 vol.% DMSO, water, NaCl) particles of APCO^2? with the hydrophobic fragments of MVCA⁸⁺. The complexes aggregate to form insoluble precipitates in aqueous and water-DMSO media. A selective reversible electroswitching from the bound to free state of one of the three bound APCO^2? particles was performed when reducing MVCA⁸⁺ to MVCA^4·+ in a 30 vol.% DMSO/NaCl medium.     

Kinetics of homogeneous dehydrogenation of formic acid in the presence of supramolecular rhodium(III) complex with P-functionalized calix[4]resorcine

The kinetics of homogeneous dehydrogenation of formic acid in the presence of supramolecular rhodium(III) complex with P-functionalized calix[4]resorcine were studied in dioxane, tetrahydrofuran, dimethylformamide, and binary formamide-dioxane mixtures (volume ratio 10: 90, 20: 80, 30: 70) over a wide temperature range (40?C90°C). The examined Rh(III) complex catalyzed the dehydrogenation process, and its catalytic activity was higher than that observed previously for rhodium complexes with non-macrocyclic phosphorus-containing ligands. The dehydrogenation rate constants were proportional to neither catalyst concentration nor dielectric constant of the medium, which is likely to be related to supramolecular nature of the Rh(III) complex. No micelle formation was observed in the examined systems.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Anion-dependent binding of zinc calix[4]pyrrole-bisporphyrinate triethylenediamine

The complexation properties of zinc 10,20-bis[5-(2,3,7,8,12,13,17,18-octaethylporphyrinate)ethynylphenyl]-5,5′,10′,15,15′,20′-hexamethylcalix[4]pyrrole toward halide ions, triethylenediamine, and 4,4′-bipyridyl were studied by spectrophotometric titration and ¹H NMR spectroscopy. The influence of binding of anions (F⁻ and Cl⁻) by the calix[4]pyrrole fragment of zinc calixpyrrole-bisporphyrinate on the complexation properties of its interporphyrin cavity toward the bidentate organic ligand triethylenediamine.     

Lanthanoid coordination with a tetrazole-substituted calix[4]diquinone and calix[4]dihydroquinone

The tetrazole-functionalised calixdiquinone 5,17-di-tert-butyl-26,28-bis-(1H-tetrazole-5-ylmethoxy)-calix[4]-25,27-diquinone Q was synthesised by chemical oxidation of the bis-tetrazole calix[4]arene precursor using PbO₂/HClO₄. The single crystal X-ray structure determination of Q confirmed the structure and showed binding of a water molecule in the solid state. Chemical reduction of Q to the dihydroquinone QR was achieved using N,N-diethylhydroxylamine. Comparison of the solution phase photophysical properties of Q or QR in the presence of terbium ions showed significant excitation only with QR, suggesting redox switching of the photophysical response may be possible with this or similar receptor.     

Hydrogen bonded homo- and heterodimers of tetra urea derivatives of calix[4]arenes

Calix[4]arene ethers fixed in the cone conformation and substituted at the upper rim by various urea residues have been synthesized by reaction of the amino calix[4]arenes with isocyanates. Their dimerisation in apolar solvents has been established by the formation of mixed dimers consisting of two different urea derivatives.     

Anion binding behavior of heterocycle-strapped calix[4]pyrroles

A comparative study of the halide and benzoate anion binding properties of a series of phenyl, pyrrole, and furan-strapped calix[4]pyrroles has been carried out. These receptors, which have previously been shown to bind the chloride anion (Yoon et al., Angew. Chem., Int. Ed. 47(27):5038–5042, 2008), were found to bind bromide and benzoate anion (studied as the corresponding tetrabutylammonium salts) with near equal affinity in acetonitrile, albeit less well than chloride, as determined from ITC measurements or NMR spectroscopic titrations. This stands in marked contrast to the parent octamethylcalix[4]pyrrole, where the carboxylate anion affinities are substantially higher than those for bromide anion under identical conditions. This finding is rationalized in terms of tighter binding cavity present in the strapped systems. For all three anions for which quantitative data could be obtained (i.e., Cl^?, Br^?, PhCO₂ ^?), the pyrrole-strapped system displayed the highest affinity, although the relative enhancement was found to depend on the anion in question. In the specific case of fluoride anion binding to the pyrrole-strapped receptor, two modes of interaction are inferred, with the first consisting of binding to the calix[4]pyrrole via NH-anion hydrogen bonds, followed by a process that involves deprotonation of the strapped pyrrolic NH proton. A single crystal X-ray diffraction analysis provides support for the first of these modes and further reveals the presence of a methanol molecule bound to the fluoride anion.     

Synthesis of meso‐tetra acid and ester functionalized calix[4]pyrroles

Novel meso‐tetracarboxylic acid and meso‐tetraester functionalized calix[4]pyrroles were synthesized by condensation of pyrrole with levulinic acid and ethyl pyruvate in sufficient yields. In addition, mixed condensation products can also be synthesized using this method. These new compounds may be useful as molecular receptors and polyfunctional starting materials for further derivatization.     

Complexation of dirhodium(II) with N-functionalized calix[4]resorcinarenes

Russian Chemical Bulletin - Some features of the complexation of [Rh2(OAc)4?2H2O] with calix[4]resorcinarenes functionalized by aminoalkyl groups in the upper or lower rims in EtOH and Me2CO...     

Complexes of rhodium(III) with N-functionalized calix[4]resorcinolol

Singularities of the rhodium trichloride reaction with calix[4]resorcinol functionalized with CH₂N· (CH₃)₂ groups in ethanol on the upper rim of the molecule, and also of calix[4]resorcinol with ethanol solution of rhodium trichloride saturated with nitrogen monoxide were studied. Neutral complex compounds separated in the solid form were characterized by IR spectroscopy, Raman spectroscopy, ¹H NMR, ESR, X-ray electron spectroscopy, electronic spectroscopy, and conductometry. Quantum-chemical calculations were performed on the basis of the density functional method in order to determine the geometric structure and energy characteristics of the complex compound and the zwitter-ion form of the ligand.     

Synthesis and binding properties of calix[4]arene telomers

Two calix[4]arene derivatives (5 and 8) and their telomers are synthesized to estimate selective extraction of alkali and transition metal cations from the aqueous to the organic phase (chloroform). Compound 5 shows selectivity toward Hg²⁺. Compound 8 and telomers 6 and 9 are not selective but are good extractants for all used transition metal ions. The observations suggest that ethylene glycol bridges are efficient for carrying transition metal cations in a two-phase solvent system. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4351–4355, 1999     

Energetics of guest binding to calix[4]arene molecular containers

The synthesis of calix[4]arene-based molecular containers 1 and 2 along with the thermodynamic behaviors of cation binding are reported. The containers encapsulated N-methylpicolinium salts to form 1:1 host-guest complexes in chloroform. The thermodynamic investigations of the containers provide contrastive pictures for the process of their guest encapsulations. The encapsulation of 1 with the N-methylpicolinium cations, bearing a series of counter anions, was primarily enthalpy-driven. The enthalpic difference among the host-guest complexes of the salts was directly related to the total electrostatic stability of the ion-pairs. When 2 encapsulated a series of the N-methylpicolinium cations within its cavity, negative heat capacity changes were observed. This suggests that the changes in the solvation spheres of the container and its guest before and after the formation of the host-guest complex depend on temperature.     

Synthesis and nitration of calix[4] (aza)crowns

Calix[4] (aza) crowns containing amide groups 3a-d were synthesized by the reactions of calix[4]arene (1a) or p-tert-butylcalix[4]arene (1b) with N, N'-ethylenebis(2-chloroac-etamide) (2a) or N, N'-1,2-phenylenebis(2-chloroacetamide) (2b) by one step procedure in yields of 85-90% . Calix[4]-(aza) crowns 4a-b could be obtained by the reduction of 3a-b with LiAlH4 in yields of 51 and 67% , respectively. The nitration of 3a or 3c afforded new chromogenic calix[4]arenes 5a bearing two nitrophenol moieties and 5c bearing one nitro-phenol and one quinone moiety, respectively. The ipso-nitrations of 3b and 3d were also studied. Both gave the products containing one nitrophenol and one quinone moiety. Moreover, a very interesting calix[4]arene derivative 5d containing one cyclohexadienone moiety was also separated as the main product when 3d was ipso -nitrated.     

Tetrakis(methylimidazole) and tetrakis(methylimidazolium) calix[4]arenes: competitive anion binding and deprotonation

Neutral tetrakis(methylimidazole) (1) and the novel cationic tetrakis(methylimidazolium) (2) calixarenes have been prepared and their solid-state and solution behaviour examined. The neutral imidazole forms a mono-zwitterion at elevated temperature, a feature that has been observed both in solution and in the solid-state. The cationic imidazolium exhibits a range of hydrogen bond interactions with anions, with the titration curves upon binding to basic anions suggesting sequential binding to both the upper and lower rims.     

Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.