Thermally exfoliated graphene oxide reinforced stress responsive conductive nanocomposite hydrogel

Lightweight and flexible biosensors that can sustain mechanical deformation and can be adhered to human skin is an interesting field of study. In the current article, a systematic study on development of thermally exfoliated graphene oxide (TEGO)–reinforced poly(vinyl alcohol) (PVA)–based conductive hydrogel nanocomposites has been reported. The free‐standing hydrogels were synthesized using controlled and repetitive freeze‐thaw cycles. The samples were then studied for their mechanical as well as electrical properties. The hydrogels were characterized for their microstructural, chemical, and rheological properties to understand the observed macroscopic properties. Additionally, a study on the behavior of hydrogels immersed in phosphate‐buffered saline (PBS) was carried out to investigate their hydrolytic stability within simulated biological environment. Overall, the nanocomposite hydrogels demonstrated excellent static and dynamic mechanical performance, stability in PBS, considerable electrical conductivity, and significant electrical response to applied external stress, establishing their potential for use as flexible biosensors.     

Enhanced hydrolysis resistance of biodegradable polymers and bio-composites

This study investigated the hydrolysis of biodegradable polymers and bio-composites at 50 °C and 90% relative humidity (RH). With increasing hydrolysis time, the mechanical properties of the biodegradable polymers and bio-composites significantly decreased due to the easy hydrolytic degradation of the ester linkage of the biodegradable polymers. With increasing hydrolysis time, the tensile strength of the polybutylene succinate (PBS) treated with anti-hydrolysis agent or with trimethylolpropane triacrylate (TMPTA) significantly increased compared to the non-treated PBS. The same results were observed for the PBS-based bio-composites. This result was confirmed by the Fourier transform infrared-attenuated total reflectance (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS) spectra, which exhibited a less eroded surface, small cracks and fewer holes due to the reduced surface hydrolysis and erosion under high humidity condition.     

Effects of ultraviolet radiation, temperature and moisture on aging of coatings and sealants - A chemical and rheological study

Photodegradation of polymeric materials leads to significant modifications in both chemical properties and mechanical-rheological behaviors over time. Thus, it is important to characterize both properties to gain a better understanding of the durability of the materials. In this contribution, the chemorheological tools based upon Fourier transform infrared (FTIR) spectroscopy and dynamic mechanical thermal analysis (DMTA) were used to study the effects of temperature and moisture on photodegradation of a model sealant/coating system based upon a styrene-butadiene-styrene triblock copolymer. Specimens were exposed coincidentally to ultraviolet-visible radiation between 295 nm and 600 nm, and one of four different combinations of temperature and relative humidity (RH), i.e., (a) 30 °C and <1% RH, (b) 30 °C and 80% RH, (c) 55 °C and <1% RH, and (d) 55 °C and 80% RH. The rate of photodegradation was examined in terms of formation of oxidation species and evolution of mechanical-rheological data, including glass transition temperatures, moduli, and the number of effective crosslinked butadiene chains per unit volume per exposure time. Environmental exposure resulted in similar degradation modes for all four environments but the rate of photodegradation was found to depend strongly on temperature. Conversely, the role of moisture on photodegradation was not significant. The study shows that chemical modification can be directly related to the corresponding rheological modifications. In addition, the relative stability of styrene and butadiene against photodegradation as a function of temperature and moisture was compared.     

高分子量聚对二氧环己酮体外降解研究

对高分子量(Mν=2.8×105)的聚对二氧环己酮条状样品在37℃磷酸缓冲溶液(PBS)中的降解行为进行了研究,通过定期观察其吸水率与质量损失,pH,特性黏数,降解过程中样品形态与晶体结构,热力学性能与机械性能的改化,发现此高分子量的聚对二氧环己酮在体外降解过程中质量损失与吸水率变化不大,但分子量下降明显,同时样品表面缺陷逐渐增加;结晶度与玻璃化温度随之改变,但其晶体结构基本保持不变;到第6周时,其力学强度基本消失.证明高分子量PPDO具有较慢的降解速度,显示出很好的稳定性.     

Thermal degradation and kinetic analysis of biodegradable PBS/multiwalled carbon nanotube nanocomposites

In this study, carbon nanotubes (CNTs) were first modified using N,N′‐ dicyclohexylcarbodiimide (DCC) dehydrating agents. Subsequently, the poly(butylene succinate)/multiwalled carbon nanotube (PBS/MWNTs) nanocomposites were prepared through facile melt blending. Thermal degradation of these PBS/MWNT nanocomposites was investigated; the kinetic parameters of degradation were calculated using the Coats and Redfern, Ozawa, and Horowitz and Metzger methods, respectively. It was found that the degradation reaction mechanism of PBS and the CNT‐C18 containing nanocomposites at lower temperature was likely to produce an F1 model through reaction of random chain cleavage (cis‐elimination). However, the reaction mechanism at higher temperature was likely to be a D1 model because of the dominant diffusion control effect. Moreover, it was found that the activation energies of CNT‐C18‐containing PBS nanocomposites were first increased with the content of CNT‐C18, but then decreased after the content was larger than 0.5 wt % for all models at differing heating rates. This may be due to the formation of a conductive network of CNTs in the polymer matrix at higher content of CNTs, which lead to better heat and electrical conductivity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1231–1239, 2009     

Investigation of water absorption in clay-reinforced polypropylene nanocomposites

The behaviour of polypropylene nanocomposites containing different amounts of commercial nanoclay upon exposure to distilled water and sea water at different temperatures was investigated and compared with that of neat polypropylene. In the initial stages, the weight gain (moisture absorption) follows Fick's second law, but at longer times deviations are observed owing to physical degradation and in some cases a loss of mass. Distilled water diffuses more rapidly than sea water. As the nanoclay content increases, both the rate of moisture absorption and the maximum moisture content increase, owing to the hydrophilic nature of the nanoclay and the added compatibilizing agent. Although the moisture absorption decreases the flexural properties of both the nanocomposites and neat PP, because the unexposed (as-moulded) nanocomposites are significantly superior to the neat PP they remain so even after prolonged exposure.     

Evaluation of the rate of abiotic degradation of biodegradable polyethylene in various environments

The rate of abiotic degradation of polyethylene (PE) films containing a manganese pro-degradant has been studied in various environments at 60 and 70 °C. The degradation was monitored from the change in molecular weight and the elongation at break after exposure to dry and humid air. It was observed that moisture had a strong accelerating effect on the rate of thermo-oxidation of PE films. However, despite the humidity level in the compost environment being similar to that in humid air, the rate of degradation in compost was much slower. It is proposed that ammonia and/or hydrogen peroxide generated by microorganisms in the compost can be responsible for the deactivating effect, as aqueous solutions of these compounds significantly retard the rate of degradation.     

In vitro evaluation of biodegradable poly(butylene succinate) as a novel biomaterial

Poly(butylene succinate) (PBSU) can be easily synthesized by condensation polymerization of the starting materials of succinic acid and butan-1,4-diol. It has good degradability and possesses excellent processability. Due to these advantages, PBSU was first evaluated in the present study for its potential application as a novel biomaterial. The in vitro biocompatibility of the PBSU was evaluated by monitoring proliferation and differentiation of osteoblasts cultured on the PBSU film substrates for different periods. The results showed that the PBSU was biocompatible as the osteoblasts could proliferate and differentiate on the PBSU plates. In addition, the hydrolytic degradation behavior of the PBSU films in the phosphate-buffered saline (PBS) was also investigated and the results suggested that the PBSU degraded in the PBS solution with the same behavior as that of the degradable poly(alpha-hydroxyesters). In addition to the biocompatibility and hydrolytic degradation, some physical properties, including hydrophilicity, and mechanical and thermal properties of the PBSU substrates, were also determined and the results revealed that the PBSU was hydrophilic and ductile with excellent processability. The biocompatibility of the PBSU, together with the advantages of hydrolytic degradability, hydrophilicity, and excellent processability, indicated that PBSU has the potential to be used as a biomaterial for tissue repair. [Diagram: see text] Alkaline phosphate activity of osteoblasts cultured on PBSU and TCPS substrates for different time periods.     

Poly(ethylene oxide) induced microstructure and hydrolytic degradation behavior changes of poly(butylene succinate)

Degradable polyesters exhibit wide application in many fields due to the fact that the waste of these polymers can be easily reclaimed, which greatly reduces the environmental risk. In this work, a small quantity of water-soluble poly(ethylene oxide) (PEO) was introduced into biodegradable poly(butylene succinate) (PBS). Crystallization behavior of the PBS matrix was comparatively investigated using polarized optical microscope (POM), differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WAXD). The results demonstrate that PEO affects the crystallization behavior of the PBS matrix, which is greatly dependent upon the PEO content. At relatively low PEO content, accelerated crystallization is achieved for the PBS matrix, while the role of PEO becomes inconspicuous at relatively high PEO content. The sample surface hydrophilicity was evaluated through contact angle measurement of distilled water. The results demonstrate that incorporating PEO into PBS greatly enhances the hydrophilicity of the sample surface. The hydrolytic degradation measurements were carried out under an alkaline condition. The results clearly show that the presence of PEO accelerates the hydrolytic degradation of the PBS matrix. Furthermore, the sample obeys the surface erosion mechanism. The mechanism for the largely enhanced hydrolytic degradation ability is then analyzed.     

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

Nanoperlite effect on thermal,rheological, surface and cellular properties of poly lactic acid/nanoperlite nanocomposites for multipurpose applications

In this study, poly lactic acid (PLA) based nanocomposites containing perlite nanoparticles were prepared by melt mixing method. Various characterization techniques were employed to evaluate the performance PLA/nanoperlite nanocomposites. The nanocomposites were characterized via FTIR to investigate the functional groups and chemical structure of the nanocomposites. Thermal properties of the nanocomposites, examined by DSC, showed that the increase of nano-perlite content in the PLA matrix reduces the crystallinity and melting temperature of the nanocomposites. The rheological studies indicated that both of storage and loss modulus are increased when the nanoperlite is added up to 5 wt%. However, the modulus is reduced in samples containing more than 5 wt% nanoparticle due to their agglomeration. The in-vitro degradation studies of the nanocomposites at elevated and normal temperatures showed hydrolytic degradation around 13–15 months. The surface behavior results implied that the water contact angle values exhibit a reducing trend when the nanoperlite content increases up to 3 wt%, which can be related to the decreased crystallinity of PLA and also to the hydrophilic nature of perlite. Moreover, the adhesion of osteoblast cells and their viability on an electrospun scaffold, made of optimized sample, showed the initial implications of potential applications of the nanocomposites in bone regeneration and biomedical applications. These multipurpose nanocomposites can also be used for packaging applications.     

Hydrolytic degradation behavior of poly(l-lactide)/SiO2 composites

In this work, different contents of nano-silica (SiO₂) particles were introduced into poly(l-lactide) (PLLA) to prepare PLLA/SiO₂ composites though a two-step compounding method, i.e. solution compounding (preparing master batch) and subsequent melt compounding (master batch dilution). The dispersion of SiO₂ was characterized using scanning electron microscope (SEM). The hydrophilicity of the material was evaluated by measuring the contact angle of water on the sample surface. The hydrolytic degradation measurements of the nanocomposites were carried out in alkaline solution at two different temperatures, i.e. 37 and 55 °C. Subsequently, microstructure evolution of PLLA matrix during the hydrolytic degradation process was systematically investigated using wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results showed that SiO₂ had good dispersion in the PLLA matrix. Largely enhanced hydrolytic degradation ability was achieved for PLLA/SiO₂ composites. Increasing the content of SiO₂ or enhancing the hydrolytic degradation temperature accelerated the hydrolytic degradation of PLLA matrix. Further results showed that SiO₂ promoted the reorganization of microstructure of PLLLA matrix during the hydrolytic degradation process.     

Preparation, characterization and hydrolytic degradation of poly[p-dioxanone-(butylene succinate)] multiblockcopolymer

A series of poly[p-dioxanone-(butylene succinate)] (PPDOBS) copolymers were prepared from p-dioxanone (PDO), 1,4-butanediol and succinate acids through a two-step process including the initial prepolymer preparation of poly(p-dioxanone)diol (PPDO-OH) and poly(butylene succinate)diol (PBS-OH) and the following copolymerization of the two kinds of prepolymers by coupling with hexamethylene diisocyanate (HDI). The molecular structures of the prepared PPDO-OH, PBS-OH and PPDOBS were characterized by hydrogen nuclear magnetic resonance spectroscopy (¹H NMR). The crystallization of the copolymers was investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray diffraction (WAXD). It has been shown that the crystallization rate and the degree of crystallization increases with the increase of the weight fraction of poly(butylene succinate) (PBS) blocks in the copolymers. In phosphate buffer solution with pH 7.4 at 37 °C for 18 weeks, the hydrolytic degradation behaviors of the copolymers were studied. The changes of retention weight, water absorption, pH value, and surface morphologies with the degradation time showed that the hydrolytic degradation rate of PPDOBS could be controlled by adjusting the weight fraction of poly(p-dioxanone) (PPDO) and PBS blocks in the copolymers. The changes of the thermal properties of PPDOBS during the degradation were also investigated by DSC.     

Thermal analysis of hydrolysis and degradation of biodegradable polymer and bio-composites

The purpose of this study was to conduct a thermal analysis of the hydrolysis and degradation behavior of biodegradable polymers and bio-composites at 50°C and 90% relative humidity (RH). With increasing hydrolysis time, the thermal stability and degradation temperature of polybutylene succinate (PBS) slightly decreased. The glass transition temperature (T _g) and melting temperature (T _m) of PBS and the anti-hydrolysis agent treated PBS did not vary significantly with increasing hydrolysis time, whereas those of the trimethylolpropane triacrylate (TMPTA)-treated PBS slightly increased. With increasing hydrolysis time, the storage modulus (E’) values of the bio-composites decreased, whereas those of the TMPTA treated bio-composites slightly increased. Also, the tan values of the anti-hydrolysis agent and TMPTA treated PBS-BF bio-composites were slightly lower than those of the non-treated bio-composites, due to the reduction in their degree of hydrolysis. The tanδ_max peak temperature (T _g) of the anti-hydrolysis agent treated bio-composites was not significantly changed, whereas that of the TMPTA treated bio-composites was increased.     

Studies on hydrolytic degradation of poly(ester-anhydride)s based on oligosuccinate and aliphatic diacids

This paper describes synthesis, characteristics and hydrolytic degradation of functional poly(ester-anhydride)s based on oligo(3-allyloxy-1,2-propylene succinate) (OSAGE) and aliphatic diacids (DA). The polymers were obtained by polycondensation of OSAGE with adipic (ADP), sebacic (SBA) or dodecanedicarboxylic acid (DDC). The carboxyl groups in OSAGE and in diacids were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers thus obtained were condensed in vacuum to yield poly(ester-anhydride)s. The structure of copolymers was confirmed by NMR spectroscopy. Influence of the kind of diacid and the OSAGE to diacid ratio on selected properties of poly(ester-anhydride)s were examined. Poly(ester-anhydride)s were subjected to hydrolytic degradation at 37 °C, in aqueous phosphate buffer solution of pH 7.41 (PBS). The course of degradation was monitored by determination of weight loss of samples, ¹H NMR and DSC. Fracture surfaces of samples during degradation were examined by scanning electron microscopy.     

Influence of Fe‐MMT on crosslinking and thermal degradation in silicone rubber/clay nanocomposites

In this article, silicone rubber (SR)/clay nanocomposites were synthesized by a melt‐intercalation process using synthetic Fe‐montmorillonite (Fe‐MMT) and natural Na‐MMT which were modified by cetyltrimethyl ammonium bromide (CTAB). This study has been designed to determine if the presence of structural iron in the matrix can result in radical trapping and then enhance thermal stability, affect the crosslinking degree and elongation. The SR/clay nanocomposites were characterized by X‐ray diffraction (XRD) patterns and transmission electron microscopy (TEM). Exfoliated and intercalated nanocomposites were obtained. Thermo gravimetric analysis (TGA) and mechanical performance were applied to test the properties of the SR/clay nanocomposites. The presence of iron significantly increased the onset temperature of thermal degradation in SR/Fe‐MMT nanocomposites. The thermal stability, gel fraction and mechanical property of SR/Fe‐MMT were different from the SR/Na‐MMT nanocomposites. So the iron not only in thermal degradation but in the vulcanization process acted as an antioxidant and radicals trap. Copyright © 2006 John Wiley & Sons, Ltd.     

Nanofibrillated cellulose (NFC) reinforced polyvinyl alcohol (PVOH) nanocomposites: properties, solubility of carbon dioxide, and foaming

Polyvinyl alcohol (PVOH) and its nanofibrillated cellulose (NFC) reinforced nanocomposites were produced and foamed and its properties—such as the dynamic mechanical properties, crystallization behavior, and solubility of carbon dioxide (CO₂)—were evaluated. PVOH was mixed with an NFC fiber suspension in water followed by casting. Transmission electron microscopy (TEM) images, as well as the optical transparency of the films, revealed that the NFC fibers dispersed well in the resulting PVOH/NFC nanocomposites. Adding NFC increased the tensile modulus of the PVOH/NFC nanocomposites nearly threefold. Differential scanning calorimetry (DSC) analysis showed that the NFC served as a nucleating agent, promoting the early onset of crystallization. However, high NFC content also led to greater thermal degradation of the PVOH matrix. PVOH/NFC nanocomposites were sensitive to moisture content and dynamic mechanical analysis (DMA) tests showed that, at room temperature, the storage modulus increased with decreasing moisture content. The solubility of CO₂ in the PVOH/NFC nanocomposites depended on their moisture content and decreased with the addition of NFC. Moreover, the desorption diffusivity increased as more NFC was added. Finally, the foaming behavior of the PVOH/NFC nanocomposites was studied using CO₂ and/or water as the physical foaming agent(s) in a batch foaming process. Only samples with a high moisture content were able to foam with CO₂. Furthermore, the PVOH/NFC nanocomposites exhibited finer and more anisotropic cell morphologies than the neat PVOH films. In the absence of moisture, no foaming was observed in the CO₂-saturated neat PVOH or PVOH/NFC nanocomposite samples.     

New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Enhanced performance of biodegradable poly(butylene succinate)/graphene oxide nanocomposites via in situ polymerization

Poly(butylene succinate) (PBS)/graphene oxide (GO) nanocomposites were facilely prepared via in situ polymerization. The properties of the nanocomposites were studied using FTIR, XRD, and (1)H NMR, and the state of dispersion of GO in the PBS matrix was examined by SEM. The crystallization and melting behavior of the PBS matrix in the presence of dispersed GO nanosheets have been studied by DSC and polarized optical microscopy. Through the mechnical testing machine and DMA, PBS/GO nanocomposites with 3% GO have shown a 43% increase in tensile strength and a 45% improvement in storage modulus. This high performance of the nanocomposites is mainly attributed to the high strength of graphene oxide combined with the strong interfacial interactions in the uniformly dispersed PBS/GO nanocomposites.