Intramolecular metathesis versus Kharasch reactions using the Grubbs metathesis catalyst: towards catalyst economy

The first generation Grubbs catalyst can promote either ring closing metathesis (RCM) or atom transfer radical cyclisation reactions (ATRC) depending upon the reaction conditions employed.     

Highly chemo- and stereoselective intermolecular coupling of diazoacetates to give cis-olefins by using Grubbs second-generation catalyst

Highly stereoselective formation of cis-2-ene-1,4-diesters by homo- and heterocoupling of alpha-diazoacetates in the presence of Grubbs second-generation catalyst is demonstrated. The dual reactivity of the catalyst in alkene metathesis and diazocoupling has been exploited in the synthesis of 12-26-membered macrocyclic dienyl dilactones by one-pot carbene dimerisation/ring-closing metathesis.     

Effects of ozone in surface modification and thermal stability of SEBS block copolymers

SEBS block copolymers were treated under mild conditions in an ozone atmosphere, producing very slightly chemically-modified surfaces. The thermal stability was analysed by chemiluminescence and related to morphological changes observed by AFM. The intrinsic thermal stability was diminished by ozone exposure, but the oxidation induction times were delayed which indicates an enhancement of thermal stability under oxidative conditions. Also, chemiluminescence analysis showed the presence of a typical order-disorder transition at temperatures around 120 °C. Two different sets of samples which showed different morphological patterns were imaged by AFM. The effects of micro-domain separation and inter-domain structure on thermal properties are discussed and explained by a coarsening of the internal interface induced by ozone. A detailed 2D Fourier transformed analysis of AFM images allowed us to identify a regular wrinkled nano-pattern induced by uniaxial strain combined with ozone treatment, offering new opportunities in applications ranging from organic electronics to bio-patterning.     

Grubbs催化剂合成研究进展

烯烃复分解反应通过催化使两个烯烃碳碳双键断裂,再重新组合形成新的碳碳双键,是以烯烃作为底物构建碳碳双键的重要方法.从反应类型来分,烯烃复分解反应主要有：关环复分解反应（RCM）,开环复分解聚合反应（ROMP）,交叉复分解反应（CM）及非环二烯复分解反应（ADMET）.在天然产物的全合成,药物化学和材料科学中均有广     

Synthesis and activity for ROMP of bidentate Schiff base substituted second generation Grubbs catalysts

The synthesis and characterisation of Schiff base substituted second generation Grubbs catalysts is described using the pyridine functionalised second generation catalyst and a Schiff base-Tl salt. The complexes are less active for the ROMP of COD (cycloocadiene) than their second generation analogues though their activity for the ROMP of DCPD (dicyclopentadiene) at high temperatures shows great potential due to the thermal stability of the catalysts.     

Improved compositional analysis of block copolymers using Diffusion Ordered NMR Spectroscopy

Block copolymers constitute a fascinating class of polymeric materials that are used in a broad range of applications. The performance of these materials is highly coupled to the physical and chemical properties of the constituting block copolymers. Traditionally, the composition of block copolymers is obtained by ¹H NMR spectroscopy on purified copolymer fractions. Specifically, the integrals of a properly selected set of ¹H resonances are compared and used to infer the number average molecular weight (M_n) of one of the block from the (typically known) M_n value of the other. As a corollary, compositional determinations achieved on imperfectly purified samples lead to serious errors, especially when isolation of the block copolymer from the initial macro initiator is tedious. This investigation shows that Diffusion Ordered NMR Spectroscopy (DOSY) can be used to provide a way to assess the advancement degree of the copolymerization purification/reaction, in order to optimize it and hence contribute to an improved compositional analysis of the resulting copolymer. To this purpose, a series of amphiphilic polystyrene-b-poly(ethylene oxide) block copolymers, obtained by controlled free-radical nitroxide mediated polymerization, were analyzed and it is shown that, under proper experimental conditions, DOSY allows for an improved compositional analysis of these block copolymers.     

Super-nucleation in nanocomposites and confinement effects on the crystallizable components within block copolymers, miktoarm star copolymers and nanocomposites

In this paper we reexamine recent results obtained by our group on the crystallization of nanocomposites and linear and miktoarm star copolymers in order to obtain some general features of their crystallization properties. Different nanocomposites have been prepared where a close interaction between the polymer matrix and the nano-filler has been achieved: in situ polymerized high density polyethylene (HDPE) on carbon nanotubes (CNT); and polycaprolactone (PCL) and poly(ethylene oxide) (PEO) covalently bonded to carbon nanotubes. In all these nanocomposites a “super-nucleation” effect was detected where the CNTs perform a more efficient nucleating action than the self-nuclei of the polymer matrix. It is believed that such a super-nucleation effect stems from the fact that the polymer chains are tethered to the surface of the CNT and can easily form nuclei. For polystyrene (PS) and PCL block copolymers, miktoarm star copolymers (with two arms of PS and two arms of PCL) were found to display more compact morphologies for equivalent compositions than linear PS-b-PCL diblock copolymers. As a consequence, the crystallization of the PCL component always experienced much higher confinement in the miktoarm stars case than in the linear diblock copolymer case. The consequences of the topological confinement of the chains in block copolymers and nanocomposites on the crystallization were the same even though the origin of the effect is different in each case. For nanocomposites a competition between super-nucleation and confinement was detected and the behavior was dominated by one or the other depending on the nano-filler content. At low contents the super-nucleation effect dominates. In both cases, the confinement increases as the nano-filler content increases or the second block content increases (in this case a non-crystallizable block such as PS). The consequences of confinement are: a reduction of both crystallization and melting temperatures, a strong reduction of the crystallinity degree, an increase in the supercooling needed for isothermal crystallization, a depression of the overall crystallization rate and a decrease in the Avrami index until values of one or lower are achieved indicating a nucleation control on the overall crystallization kinetics.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Substantiating the influence of pore surface functionalities on the stability of Grubbs catalyst in mesoporous SBA-15 silica

The influence of pore surface functionalities in mesoporous SBA-15 silica on the stability of a model olefin metathesis catalyst, namely Grubbs I, is substantiated. In particular, it is demonstrated that the nature of the interaction between the ruthenium complex and the surface is strongly depending on the presence of surface silanols. For this study, differently functionalized mesoporous SBA-15 silica materials were synthesized according to standard procedures and, subsequently, the Grubbs I catalyst was incorporated into these different host materials. All of the materials were thoroughly characterized by elemental analyses, nitrogen physisorption at -196 °C, thermogravimetric analyses, solid-state NMR spectroscopy, and infrared spectroscopy (ATR-IR). By such in-depth characterization of the materials, it became possible to achieve models for the surface/catalyst interactions as a function of surface functionalities in SBA-15; for example, in the case of purely siliceous silanol-rich SBA-15, octenyl-silane modified SBA-15, and silylated equivalents. It was evidenced that large portions of the chemisorbed species that are detected spectroscopically arise from interactions between the tricyclohexylphosphine and the surface silanols. A catalytic study using diethyldiallylmalonate in presence of the various functionalized silicas shows that the presence of surface silanols significantly decreases the longevity of the ring-closing metathesis catalyst, whereas the passivation of the surface by trimethylsilyl groups slows down the catalysis rate, but does not affect significantly the lifetime of the catalyst. This contribution thus provides new insights into the functionalization of SBA-15 materials and the role of surface interactions for the grafting of organometallic complexes.     

Precise synthesis of olefin block copolymers using a syndiospecific living polymerization system

This feature article summarizes the synthesis of novel olefin block copolymers using fast syndiospecific living homo- and copolymerization of propylene, higher 1-alkene, and norbornene with ansa-fluorenylamidodimethyltitaniumbased catalyst according to the authors’ recent results. The catalytic synthesis of monodisperse polyolefin and olefin block copolymer was also described using this living system.     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Synthesis of polypeptide/inorganic hybrid block copolymers

Polypeptide/inorganic hybrid copolymers were obtained by a four-step synthetic approach combining (i) atom transfer polymerization of tert-butyl acrylate, (ii) chemical modification of the bromo end groups of ATRP-polymers into primary amino group using Gabriel reaction, (iii) ring opening polymerization of N_ε-trifluoroacetyl-l-lysine or γ-benzyl-l-glutamate N-carboxyanhydrides followed by (iv) the transamidification reaction using a large excess of (3-aminopropyl)trimethoxysilane to substitute the tert-butyl groups of the poly(tert-butyl acrylate) block. Products were characterized using ¹H NMR, FT-IR, DSC and MALDI-TOF MS. These techniques proved that polymerization of tert-butyl acrylate was controlled whatever the molecular weight targeted and that bromide was quantitatively converted to amino end group by a original method leading to the synthesis of copolymers in the presence of N-carboxyanhydrides as monomers. Amphiphilic polypeptide/inorganic hybrid copolymers were then achieved.     

环境响应性嵌段共聚物的合成、自组装及应用研究进展

近年来具有环境响应性的嵌段共聚物的研发受到了人们的广泛关注。该类型共聚物可以对外界环境刺激产生相应的结构、物理及化学性能的变化。根据外界环境刺激响应机理及类型的不同,可将其分为单一因素、双重因素以及三重因素刺激响应性嵌段共聚物三大类。针对每一类体系,本文重点综述了嵌段共聚物的设计合成、自组装以及应用等研究现状,并概括总结了各种有序聚集体(如胶束、囊泡等)随外界环境刺激(如pH、温度、光、CO_2、氧化还原剂等)所作出的响应性变化。最后,对智能型嵌段共聚物在药物控释、纳米容器制备、生物功能材料等方面潜在的应用价值和今后可能的发展方向进行了展望。     

Synthesis and thiol-responsive degradation of polylactide-based block copolymers having disulfide junctions using ATRP and ROP

A new method to synthesize a variety of well-controlled polylactide (PLA)-based block copolymers having disulfide linkages at block junctions (PLA-ss-PATRPs) was investigated. The method uses a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) that initiates the synthesis of a new disulfide-labeled double-head initiator having both terminal OH and Br groups (HO-ss-iBuBr). The amount of tin catalyst and polymerization time significantly influenced the control of ROP initiated with HO-ss-iBuBr. A series of ATRP of various methacrylates as well as acrylate and styrene in the presence of the resulting PLA-ss-iBuBr macroinitiators proceeded in a living manner. These well-controlled PLA-ss-PATRPs were further characterized for thermal properties using differential scanning calorimetry and thiol-responsive degradation upon the cleavage of disulfide linkages. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym. Chem. 2013, 51, 3071–3080     

Design of water-soluble block copolymers containing poly(4-vinylpyridine) by atom transfer radical polymerization

The preparation of block copolymers consisting of poly(4-vinylpyridine) (P4VP) by atom transfer radical polymerization (ATRP) was investigated. The goal was to synthesize water-soluble block copolymers with poly(ethylene oxide) (PEO) as first block, a water-soluble polymer at any pH. First, a PEO macroinitiator was prepared for the ATRP block copolymerization of 4-vinylpyridine. In the second stage, the kinetic behaviour of this block copolymerization was investigated for two different types of PEO-macroinitiators and catalyst systems, based on CuCl or CuCl₂/Cu(0), with tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as the ligand. Various combinations of initiator and catalyst led to a controlled block copolymerization with optimized results obtained for chlorinated poly(ethylene glycol) monomethyl ether as macroinitiator, together with CuCl₂/Cu(0)/Me₆-TREN as catalyst system. With the latter system, narrow polydispersities (1.25) could be reached for PEO-P4VP block copolymers.     

Interactions of amphiphilic block copolymers with lipid model membranes

Studies on interactions between amphiphilic block copolymers and lipid membranes have been focused traditionally on ABA triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), widely due to their commercial availability. However, new architectures of amphiphilic block copolymer have been synthesized in recent years partially taking advantage of new polymerization techniques. This review focuses on amphiphilic block copolymers with potential biological activity and on model membrane systems used for studying interactions with such block copolymers. Experimental methods to study block copolymer–phospholipid interactions in Langmuir monolayers, liposomes, and planar bilayers are summarized. This work is intended to convey a better understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy. Recent developments and open questions are addressed.     

In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles

Diblock copolymers composed of poly(oxy-ethylene) (POE) and poly(dl-lactic acid) segments were synthesized by anionic polymerization of d,l-lactide using the oxyanion formed by reaction of the monohydroxyl monomethoxy-poly(ethylene glycol) on sodium hydride. For comparison, a similar copolymer was prepared by using tin octoate to catalyze the lactide polymerization. The copolymers were used to make nanoparticles, which were stored at 4 °C. After a few months under these storage conditions, a dramatic decrease of the poly(ethylene glycol) content was observed, however, the mean diameter of the nanoparticles was not affected. The degradation of the nanoparticles was investigated in vitro under conditions selected to mimic physiological conditions. Changes of characteristics were monitored by ¹H NMR, SEC, DLLS and CZE on nanoparticles and/or on the degradation by-products dissolved in the ageing medium. According to their nanometric dimensions, the microparticles degraded very slowly and there was no difference in behaviour between the sodium hydride and the stannous octoate-derived copolymers.     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Olefin ring closing metathesis and hydrosilylation reaction in aqueous medium by Grubbs second generation ruthenium catalyst

The Grubbs second generation ruthenium catalyst was shown to catalyze various olefin ring closing metathesis and hydrosilylation reactions in aqueous medium. Reactions proceeded in pure water without any additives or cosolvents, in a short period of time. We found that inhomogeneity of the reaction mixture does not prevent high conversion (70-95%) of the products in both reactions.     

Novel synthesis of biodegradable linear and star block copolymers based on ε‐caprolactone and lactides using potassium‐based catalyst

Biodegradable, triblock poly(lactide)‐block‐poly(ε‐caprolactone)‐block‐poly(lactide) (PLA‐b‐PCL‐b‐PLA) copolymers and 3‐star‐(PCL‐b‐PLA) block copolymers were synthesized by ring opening polymerization of lactides in the presence of poly(ε‐caprolactone) diol or 3‐star‐poly(ε‐caprolactone) triol as macroinitiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C‐NMR. The formation of block copolymers was confirmed by NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5363–5370, 2008