Effect of the nanosilica content in the shell of coextruded wood‐plastic composites to enhance the ultraviolet aging resistance

Weathering durability of wood‐plastic composites (WPCs) is a significant issue for outdoor applications. Nanosilica is widely used to enhance the ultraviolet (UV) aging resistance of composites. In this study, the effects of nanosilica (0%, 1%, 2%, 5%, and 10%) added into the shell of coextruded WPCs were investigated after 2500‐hour UV exposure. Discoloration, durability, degradation, and photooxidation of the composites were studied by colorimetry, mechanical testing, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X‐ray photoelectron spectroscopy (XPS). The samples with 2% nanosilica addition (the N2 samples) provided optimal color protection, showing the lowest ΔE* (color difference) and ΔL* (lightness) values in all samples. The surface of N2 samples was less oxidized after UV exposure as revealed by FTIR and XPS analysis, and showed fewer cracks in SEM images compared with controls and other samples. In addition, N2 samples provided best flexural properties. In summary, the addition of 2% nanosilica was most effective in protecting WPCs from UV degradation. Moreover, obtained results provide a theoretical development for adopting the nanosilica as a reinforcing agent in WPCs and applying coextruded WPCs in outdoors.     

Characterization of weathered wood-plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS

Much of the current growth of wood-plastic composites (WPCs) is due to increased penetration into the decking market; therefore it has become imperative to understand the durability of WPCs in outdoor applications. In this study, wood flour filled high-density polyethylene (HDPE) composites were manufactured through either injection molding or extrusion. A set of extruded composites were also planed to remove the extruded surface. Composites were weathered in a xenon-arc weathering apparatus. Scanning electron microscopy (SEM) was used to characterize the morphology of the composite surface. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy was useful in showing the loss of wood particles from the surface after weathering. Contact angle was higher for the extruded and planed composites compared with the injection molded composites, and was shown using X-ray photoelectron spectroscopy (XPS) to be due to lubricant used as a processing aid.     

Accelerated weathering of polypropylene/wood flour composites

Wood-plastic composites (WPCs) have received increasing attention during the last decades, because of many advantages related to their use. Some of their main applications are represented by outdoor furnishing and decking; therefore, it is important to assess their behaviour under UV exposure. In this work, polypropylene/wood flour composites were prepared and their resistance to photooxidation investigated. The composites were prepared by extrusion and compression moulding, and were subjected to mechanical tests, FTIR analysis and molecular weight measurements. The results showed that the composites retained a higher fraction of the original mechanical properties after accelerated weathering; the wood flour did not significantly degrade throughout the irradiation time slot of the investigation and the composites kept a higher percentage of the original molecular weight.     

The research on the mechanical properties improvement of HDPE/ABS blends reinforced with acid‐treated wood fiber

In this study, the effect of acid‐treated wood fiber modifications on the mechanical behaviors of HDPE/ABS blend is investigated. Wood fiber/HDPE/ABS composites were fabricated by incorporating acid‐treated wood fiber into HDPE/ABS blends. The results showed that both the tensile strength and flexural strength of wood fiber/HDPE/ABS composites were greater than those of HDPE/ABS blend, regardless of wood fiber modification. The results also showed that the impact strength of HDPE/ABS composites is improved by the addition of wood fiber. Scanning electron microscopic (SEM) examination of fractured surfaces showed that the improvement in the mechanical properties of the wood fiber/HDPE/ABS composites was attributed to the improved dispersion of wood fiber in the HDPE/ABS and the better interfacial characteristics caused by the acid treatment of the wood fiber.     

Physical properties of PVC/aminosilane‐treated wood flour/organoclay composites

Most physical properties of a wood plastic composite (WPC) with poly(vinyl chloride) (PVC) matrix are lower than those of corresponding neat PVC because of poor interfacial adhesion between hydrophobic PVC and hydrophilic wood. In this study, to improve the interfacial adhesion, wood flour was pre‐treated with N‐2(aminoethyl)‐3‐aminopropyltrimethoxysilane, and the surface modification was characterized and confirmed by X‐ray photoelectron spectroscopy (XPS). Furthermore, to improve the performance of PVC/wood composites, a type of organoclay was added as nanofiller. PVC/wood/clay composites were prepared by melt blending a heavy metal‐free PVC compound, the aminosilane‐treated wood flour, and the organoclay, and their physical properties were tested by universal testing machine and thermal gravimetric analyzer. X‐ray diffractometer (XRD) analyses of the WPCs showed an intercalated structure of the organoclay. The scanning electron microscope images for the fracture surfaces of the WPCs confirmed the positive effect of the aminosilane pre‐treatment by showing reduced debonding of wood flour from the PVC matrix. The performance of the WPCs was improved by the aminosilane pre‐treatment of the wood flour and the organoclay. Copyright © 2011 John Wiley & Sons, Ltd.     

Studies on preparation of HDPE/CB composites including a novel oriented structure by the microwave heating and their characterization

Microwave heating has several advantages over traditional methods of heating, including rapid and uniform heating, greater penetration depth of heat into material, lower power costs and selective heating within the material and so on. In this paper, effects of microwave heating on the properties of high‐density polyethylene/carbon black (HDPE/CB) composites were studied. The results show that the HDPE/CB composites can be heated via microwave irradiation, and composites with different CB concentration exhibit different microwave heatability. The 20 wt% CB composites have the most rapid heating rate, and its temperature reaches 78°C after 10 sec, and 159°C after 150 sec, respectively. Meanwhile, microwave heating improves the mechanical properties of HDPE/CB composites. Scanning Electron Microscopy (SEM) analysis shows a better combination between CB particles and HDPE after microwave irradiation. Furthermore, selective heating of microwave was used to prepare a novel oriented structure, which the core layer has preferential orientation and the surface layer has little orientation. Characterization of the novel oriented structure was also studied. Wide angle X‐ray diffraction (WAXD) analysis of 25 wt% CB composites with the novel oriented structure shows that the diffraction peaks of the surface layer are obviously weaker than those of the core layer, which indicates that orientation in the core layer is more intensive than that in the surface layer. The novel oriented structure is different to the traditional skin‐core structure, in which the surface layer has preferential orientation and the core layer has little orientation. Copyright © 2009 John Wiley & Sons, Ltd.     

石墨填充高密度聚乙烯基复合材料导热性能的研究

选用导热系数较高的无机填料石墨对高密度聚乙烯(HDPE)进行填充改性;采用偶联剂和磨盘型力化学反应器对石墨进行表面处理,提高石墨与聚合物基体的界面相互作用;用自行研制的升温速率测定装置测试材料的导热性能,并研究材料的导热机理;用SEM观察复合材料的微观形态.实验结果表明:经偶联剂处理后,石墨在HDPE中均匀分布;测试试样的上表面温度随时间的变化可用三次多项式T=A₀+A₁t+A₂t²+A₃t³拟会;HDPE/石墨复合材料升温速率随石墨含量增加而增大;石墨含量为35％的复合材料最大升温速率为HDPE的1.75倍.     

粒子填充HDPE复合体系动态流变行为研究

研究了炭黑(CB)和石墨(GP)填充高密度聚乙烯(HDPE)复合体系的动态流变行为.发现高填料含量时出现似固体行为,并认为它归因于无机粒子网络逾渗结构的形成.在相同聚合物基体条件下,粒子种类和粒子几何参数(粒子形状、大小、粒径分布)对低频区域流变行为、流变参数的逾渗行为和逾渗阈值(φ_c)有决定性影响,且种类的影响相比于粒子几何参数更为显著.此外,高表面活性及高比表面积(大径厚比、小尺寸)粒子填充体系具有较低的φ_c.     

电响应聚合物薄膜的表面图案化

研究了炭黑(CB)和石墨(GP)填充高密度聚乙烯(HDPE)复合体系的动态流变行为.发现高填料含量时出现似固体行为,并认为它归因于无机粒子网络逾渗结构的形成.在相同聚合物基体条件下,粒子种类和粒子几何参数(粒子形状、大小、粒径分布)对低频区域流变行为、流变参数的逾渗行为和逾渗阈值(φc)有决定性影响,且种类的影响相比于粒子几何参数更为显著.此外,高表面活性及高比表面积(大径厚比、小尺寸)粒子填充体系具有较低的φc.     

iPP/HDPE/CB三元导电复合材料的导电与流变行为

利用界面能原理使CB选择性分布于HDPE中成为复合导电相,固定CB在HDPE中的质量分数(20 wt％),控制CB/HDPE导电相在iPP中的含量,制备出一系列三元(iPP/HDPE/CB)导电复合材料,并研究其导电逾渗和流变逾渗行为.结果表明,在复合导电相含量为20 wt％时复合材料内即形成导电网络,在复合导电相含量30 wt％时出现流变网络.只有当复合导电相在材料中形成连续相时(60 wt％),损耗因子在频率扫描中才出现峰值.     

Preparing iPP/HDPE/CB functionally gradient materials: influence factors of components and processing

In this work, gradient materials with low electrical resistivity were prepared by compounding isotactic polypropylene (iPP)/high density polyethylene (HDPE) blends with carbon black (CB) through extruding and injection molding. Contact angle measurements and morphology measurements showed that the CB particles were selectively located in HDPE phase and the final composites had a gradient structure that the HDPE/CB phase exhibited different morphologies in the skin layer and core layer of the composites under different processing procedures. The main factors influencing the formation of the functional gradient materials (FGM), including screw speed during extruding, iPP types and CB contents were discussed. They affect the phase morphology by shear stress, the restoration of HDPE phase, and the viscosity ratio of polymer blends, respectively. In conclusion, iPP/HDPE/CB FGM could be formed easily in the composites blending with the iPP type with narrow molecular weight distribution (MWD) and higher CB content extruded at higher screw speed. The electrical properties of iPP/HDPE/CB composites were studied and the results showed that screw speed in extrusion significantly influenced the percolation curve and electrical property of the final composites. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of the melt flow index of an HDPE matrix on the properties of composites with wood particles

Composites of wood waste and high-density polyethylene (HDPE) resins and different melt flow index (MFIs) was development in this work. Therefore, it was possible to assess their effect on the mechanical, thermal, and morphologic properties of these composites. The formulations were prepared using a twin-screw extruder, and the MFI, tensile strength, flexural strength, and impact strength of the composites were analyzed. Additionally, the thermal properties were evaluated by differential scanning calorimetry (DSC). Finally, structural analyses using optical microscopy (OM) and scanning electron microscopy (SEM) were performed to assess the particles’ dispersion, distribution, and adhesion to the polymer matrix. The results indicated that composites from HDPE resins with a lower MFI yielded a better dispersion of the wood waste. During processing was observed, reduce the MFI and better dispersion of the polymer matrix, which positively influenced some of the mechanical properties analyzed in the study.     

Creep resistance of HDPE/PA66 system: Effect of PA66 phase geometry and graphite nanoplatelets addition

Microfibrillar composites (MFC) with in-situ generated short polymeric fibres feature, unlike composites containing inorganic rigid fibres/particles, lower creep resistance in comparison with analogous blends containing spheres. Further attribute is unprecedented decrease in creep resistance of the blend by graphite nanoplatelets (GNP). Explanation of this behaviour of the HDPE/PA66/GNP system consists in characterization of structure and finite element analysis (FEA) „mapping“ the effect of reinforcement and interface parameters on creep behaviour. Lowering of reinforcement modulus and its viscoelasticity may lead to worse creep resistance of fibrous composites. FEA also indicates marked negative effect of the soft interface, i.e. GNP-reduced crystallinity of HDPE near the interface, on creep resistance of the spheres-reinforced system in contrast to MFC. Structural changes are indicated by polarized light microscopy, SEM and TEM. The results reveal so far unknown complexity of the performance of polymer/polymer composites which may cause unprecedented antagonistic effects.     

纤维状填料/HDPE复合体系的导电渗流与流变渗流行为的关系

研究了纤维状导电材料不锈钢纤维(SSF)填充高密度聚乙烯(HDPE)导电复合体系的导电渗流与流变渗流行为之间的关系,并与颗粒状导电颗粒炭黑(CB)/HDPE导电复合体系进行了比较.发现当SSF含量极低(0.3vol%)时,SSF/HDPE体系即发生导电渗流现象,且导电渗流转变区域极窄;而仅当SSF含量达到4.8vol%时,该复合体系才表现出流变渗流现象,这一结果与CB/HDPE体系及纳米级导电纤维填充体系截然不同.此外,通过正温度系数效应的研究发现SSF形成的导电通路稳定性高于CB/HDPE体系.我们认为,SSF/HDPE体系呈现的这些特点均与SSF较大的直径及长径比且其导电通路及流变渗流网络的形成机理不同有关.     

The effect of surface coating of CNTs on the mechanical properties of CF‐filled HDPE composites

Mechanical properties of carbon fiber (CF) and carbon nanotube (CNT)‐filled thermoplastic high‐density polyethylene (HDPE) composites were studied with particular interest on the effects of filler content and fiber surface treatment by coupling agent. Surface‐treated CF‐filled HDPE composites increased their tensile strength and impact strength, which is further increased with the addition of CNT. SEM showed that CNT‐coating‐treated CF‐HDPE composites show better dispersion of the filler into the matrix, which results in better interfacial adhesion between the filler and the matrix. Copyright © 2014 John Wiley & Sons, Ltd.     

Resistivity-Temperature Behavior of CB-Filled HDPE Foaming Composites

High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the second component, ethylene-vinyl acetate（EVA） and ethylene propylene rubber（EPR） as the third component, azobisformamide（AC） as foamer, and dicumyl peroxide（DCP） as cross-linker. The structure and resistivity-temperature behavior of high-density polyethylene（HDPE）/CB foaming conductive composites were investigated. Influences of carbon black, LDPE, EVA, EPR, AC, and DCP on the foaming performance and resistivity-temperature behavior of HDPE/CB foaming conductive composites were also studied. The results reveal that HDPE/CB foaming conductive composite exhibits better switching characteristic; ACET-filled HDPE foaming conductive composite displays better positive temperature coefficient（PYC） effect; whereas super conductive carbon black（HG-1P）-filled HDPE foaming conductive composite shows better negative temperature coefficient（NTC） effect.     

Study on insulating thermal conductive BN/HDPE composites

Thermal conductivity of boron nitride (BN) reinforced high density polyethylene (HDPE) composites was investigated under a special dispersion state of BN particles in HDPE, i.e., BN particles surrounding HDPE matrix particles. The results indicated that the special dispersion of BN in matrix gives the composites high thermal conductivity at low filler content; moreover, the smaller BN particles can more easily form conductive chains of filler compared to the larger filler particles. Examining the dependence of electrical insulation and mechanical properties of the composites on BN content demonstrated that the reinforced composites containing 30% by volume of filler has good electrical insulation and mechanical properties.     

Structure,thermal stability,and photocrosslinking characterization of HDPE/LDH nanocomposites synthesized by melt‐intercalation

Structure, thermal properties, and influence of layered double hydroxide (LDH) fillers on photocrosslinking behavior of high‐density polyethylene (HDPE)/LDH nanocomposites have been studied in the present article. The X‐ray diffraction and transmission electron microscopy analysis demonstrate that the completely exfoliated HDPE/LDH nanocomposites can be obtained by controlling the organomodified LDH loading via melt‐intercalation. The data from the thermogravimetric analysis show that the HDPE/LDH nanocomposites have much higher thermal stability than HDPE sample. When the 50% weight loss was selected as a comparison point, the decomposition temperature of HDPE/LDH sample with 5 wt % LDH loading is ～40 °C higher than that of HDPE sample. The effects of UV‐irradiation on the HDPE/LDH nanocomposites show that the photoinitiated crosslinking can destroy the completely exfoliated structure to form the partially exfoliated structure, which decreased the thermal stability of the nanocomposites. However, the thermal stability of photocrosslinked samples can increase with increasing the UV‐irradiation time. The effect of LDH loading on the gel content of UV‐irradiated nanocomposites shows that the LDH materials can greatly absorb the UV irradiation and thus decrease the crosslinking efficiency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3165–3172, 2006     

界面作用对HDPE/POEg/CaCO_3三元复合材料韧性的影响

通过界面改性,制备了以CaCO3为核,马来酸酐接枝乙烯-辛烯共聚物弹性体(POEg)为壳的高密度聚乙烯(HDPEg)/弹性体(POE)/CaCO3的三元复合材料.由于“核-壳”结构的形成,弹性体和CaCO3表现出协同的增韧作用.同未经表面处理的CaCO3复合材料相比,在相同的CaCO3含量的情况下,表面处理的CaCO3由于与弹性体形成更强的界面粘结,使得三元复合材料的“脆-韧”转变发生在较低的弹性体含量.     

The effect of the addition of talc on tribological properties of aramid fiber‐reinforced polyimide composites under high vacuum,ultraviolet or atomic oxygen environment

The aramid fibers‐reinforced polyimide composites filled with talc were fabricated by means of a hot press molding technique, and mechanical and tribological behaviors were comparatively investigated. Experimental results showed that the elastic modulus of the composites increased with an increase of the talc, but the impact intensity and loss factor decreased. Besides, the coefficient of friction decreased with the increase of the talc content. To contrast the effects of the ultrahigh vacuum (VC), ultraviolet (UV) or atomic oxygen (AO) on the composites, experiments without irradiation or after UV or AO irradiation were conducted. Scanning electron microscopy and X‐ray photoelectron spectroscopy (XPS) analysis showed that UV or AO irradiation can change the surface structure and chemical composition of the polymer because of the photooxidation and chemical erosion. Copyright © 2012 John Wiley & Sons, Ltd.