Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

Diffusion of polyphosphates into (poly(allylamine)-montmorillonite) multilayer films: flame retardant-intumescent films with improved oxygen barrier

The present paper relies on the original idea to design multifunctional coatings, and in particular highly efficient intumescent flame retardant coatings, based on the diffusion of polyphosphates (PSPs) in exponentially growing "layer-by-layer" films made from montmorillonite (MMT) and poly(allylamine) (PAH). Here, we used polyphosphates as an acid source, polyallylamine as both a carbon source and a swelling agent, and finally clays to reinforce the intumescent char strength and also for their oxygen barrier property. The coatings made from the alternated deposition of n = 60 layer pairs of PAH and MMT reach a considerable thickness of ～18 μm with well-defined ordering of the MMT in the direction parallel to the substrate. Structural, morphological, mechanical, gas barrier, and fire resistance properties of these films have been studied. Excellent oxygen barrier properties and extraordinary fire resistance properties are demonstrated based on the basis of a strong increase of the time to ignition and on a decrease of the heat release rate of polylactide substrates during mass loss calorimeter tests. This new and innovative intumescent flame retardant system based on (PAH-MMT)(n)-PSP coatings is a promising universal treatment for current polymeric materials.     

海泡石对膨胀阻燃聚丙烯燃烧和热分解的影响

将改性后的海泡石添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀阻燃聚丙烯(PP/IFR)体系中,采用氧指数(LOI)、热重分析(TGA)、光电子能谱(XPS)、傅里叶变换红外(FTIR)光谱、锥形量热仪(CONE)和扫描电镜(SEM)考察其对膨胀阻燃体系的催化协效作用,探讨作用机理.LOI结果表明,改性的海泡石比纳米水滑石和有机改性的蒙脱土有更好的催化协效作用.CONE数据证实,海泡石可以降低膨胀阻燃聚丙烯体系的热释放速率和总的热释放量.通过观察SEM图片发现,海泡石可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.TGA结果表明,在氮气和空气气氛下,海泡石均可以提高膨胀炭层的热稳定性,增加高温时残余物的量,其主要作用对象为APP.FTIR和XPS测试发现加热过程中海泡石可以与APP发生化学反应,形成P—O—Si键,增加了APP高温时的稳定性.     

Fire retardancy behavior of PLA based nanocomposites

To understand and improve the fire retardancy behavior of polylactic acid, we have incorporated two structurally different additives, sepiolite and organically modified montmorillonite. A novel approach (combination of electrospinning and extrusion/injection molding) is employed to address critical issues like char enhancement as well as the homogeneity/uniformity of the inorganic barrier during combustion of polymer nanocomposites. Fundamental knowledge is gained on the mechanisms of fire retardancy, particularly with samples of different thicknesses (thermally thin versus thermally intermediate/thick). Volumetric imaging of the residues provided a deeper understanding of the formation or the evolution of the inorganic barrier. Considerable insight on the dependency of biodegradation on the environment (primarily) and on the compromising effect of high aspect ratio nanoparticles is also obtained. This knowledge has a broader scientific impact and is critical to design the new generation of eco-benign flame retardant and biodegradable polymer nanocomposites.     

Reprocessed High Impact Polypropylene Containing Oil Pollutant Exhibiting Flame Retardant Properties

Summary: In this work, the reaction to fire of reprocessed polypropylene (PP)/Ethylene Propylene Rubber (EPR) materials containing engine oil as pollutant was investigated by mass loss calorimetry. It was compared to the behaviour of the corresponding original high impact PP material. In order to flame retard the polymers, an intumescent system was studied in combination with zinc borate (ZB) as potential synergistic agent. It is shown that 20% of additives are necessary to obtain good FR properties. The use of ZB greatly improves the reaction to fire of original PP/EPR materials due to the formation of borophosphates during the degradation process that permit to reinforce the char structure. In the case of the polluted and reprocessed formulations, ZB has no influence on the fire performance because the minerals included in the engine oil act also as a flame retardant. For the two types of materials, it is demonstrated that the expansion rate at the beginning of the intumescent process plays a crucial role in the formation of an efficient insulating layer at the surface of the substrate. On the contrary, the fire performance is not related to the thickness of the carbonaceous shield.     

Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System

In this study, the effects of halloysite nanotubes (HNTs) reinforcement in expandable graphite based intumescent fire retardant coatings (IFRCs) developed using a polydimethylsiloxane(PDMS)/phenol BA epoxy system were investigated. Intumescent coating formulations were developed by incorporating different weight percentages of HNTs and PDMS in basic intumescent ingredients (ammonium polyphosphate/melamine/boric acid/expandable graphite, APP/MEL/BA/EG). The performance of intumescent formulations was investigated by furnace fire test, Bunsen burner fire test, field emission electron microscopy (FESEM), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and Fourier transform infrared analysis (FTIR). The Bunsen burner fire test results indicated that the fire performance of HNTs and PDMS reinforced intumescent formulation has improved due to the development of silicate network over the char residue. Improved expansion in char residue was also noticed in the formulation, SH(3), due to the minimum decomposition of char carbon. FESEM and TEM results validated the development of silicate network over char layer of coating formulations. A considerable mass loss difference was noticed during thermal gravimetric analysis (TGA) of intumescent coating formulations. Reference formulation, SH(0) with no filler, degraded at 300 °C and lost 50% of its total mass but SH(3), due to synergistic effects between PDMS and HNTs, degraded above 400 °C and showed the maximum thermal stability. XRD analysis showed the development of thermally stable compound mulltie, due to the synergism of HNTs and siloxane during intumescent reactions, which enhanced fire performance. FTIR analysis showed the presence of incorporated siloxane and silicates bonds in char residue, which endorsed the toughness of intumescent char layer produced. Moreover, the synergistic effect of HNTs, PDMS, and other basic intumescent ingredients enhanced the polymer cross-linking in binder system and improved fire resistive performance of coatings.     

Roles of organic intercalation agent with flame retardant groups in montmorillonite (MMT) in properties of polypropylene composites

Three kinds of organic intercalation agent containing flame retardant groups, melamine (MA), triphenylphonium (TPP) chloride, and tetradecyl trihexyl phosphonium (TTP) bromide were intercalated into montmorillonite (MMT) via cation exchange reactions. These modified MMTs are combined with intumescent systems and compounded with PP. The flame retardant and thermal properties of the PP composites are studied. The organic intercalation agents in the layers of MMT play important roles in the char formation and flame retardant properties of PP composites. MA shows a better performance in limiting oxygen index (LOI) value and TPP helps to increase UL‐94 properties, whereas TTP maintains or deteriorates the flame retardancy of polypropylene/intumescent flame retardant (IFR) composites. The LOI and UL‐94 properties increase firstly and then decrease as the content of MMT increases. The MA acts as a blowing agent and emits an inert gas to provide migration impetus, which results in a better intumescent structured and stronger char to endure heat erosion. Although TPP and TTP emit combustible gas that burn, especially for TTP as it has a more flammable aliphatic chain. The synergistic effect between MA‐MMT and IFR is better than that for TPP‐MMT and TTP‐MMT. Copyright © 2014 John Wiley & Sons, Ltd.     

A review of candidate fire retardants for polyisoprene

Polyisoprene elastomer, as natural rubber (NR) or manufactured synthetically (IR), is used in rubber compounds for applications such as tyres, dampers and suspension elements. NR/IR compounds without fire retardants have a low resistance to burning, and emit large quantities of dense smoke. This is because polyisoprene readily decomposes upon heating, by random chain scission, vaporising into a mixture of small aromatic chemical species, which ignite readily and form smoke particles with negligible char residue formation. The effects of commonly used additives on the thermal decomposition and burning of polyisoprene are reviewed; whilst cross-linking agents have significant effects on physical and ageing properties, they have little effect on thermal decomposition and burning. Fillers such as carbon black and silicas reduce the fuel content by dilution of the polymer and the formation of a stabilising residue.Potential approaches for fire retarding IR are reviewed, identifying two main approaches; halogenated additives, or high loadings of aluminium hydroxide (ATH), neither of which are satisfactory. Other potential approaches are identified, including the use of phosphorus and nitrogen based additives as intumescent char formers, and with zeolites as char catalysts. Alternative inorganic fire retardants to ATH are identified for use, and zinc hydroxystannate and zinc borate are considered as synergists with ATH. Expandable graphite (EG) is identified for use in other elastomers and has potential for polyisoprene. Nano-scale fire retardants such as montmorillonite clay and multi-walled carbon nanotubes are reported typically as a secondary additive to hydrated fillers, but have yet to make a successful transition to industrial processing.     

Phosphorus polyester versus aluminium phosphinate in poly(butylene terephthalate) (PBT): Flame retardancy performance and mechanisms

Pyrolysis and fire behaviour of a phosphorus polyester (PET-P-DOPO) have been investigated. The glycol ether of the hydroquinone derivative of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide was used as a reactive halogen-free flame retardant in PET-P-DOPO. PET-P-DOPO is proposed as an alternative to poly(butylene terephthalate) (PBT) with established halogen-free additives. It exhibits a high LOI (39.3%) and achieves V-0 classification in the UL 94 test. Three different mechanisms (flame inhibition, charring and a protection effect by the intumescent char) contribute to the flame retardancy in PET-P-DOPO and were quantified with respect to different fire risks. The fire load was reduced by 66% of the PBT characteristic. The reduction is the superposition of the relative reduction due to flame inhibition (factor 0.625) and charring (factor 0.545). The peak of heat release rate (pHRR) was reduced by 83% due to flame inhibition, charring and the protection properties of the char (factor 0.486). The strength of all three mechanisms is in the same order of magnitude. The intumescent multicellular structure enables the char to act as an efficient protection layer. PBT flame-retarded with aluminium diethylphosphinate was used as a benchmark to assess the performance of PET-P-DOPO absolutely, as well as versus the phosphorus content. PET-P-DOPO exhibits superior fire retardancy, in particular due to the additional prolongation of the time to ignition and increase in char yield. PET-P-DOPO is a promising alternative material for creating halogen-free flame-retarded polyesters.     

Synthesis of a novel hybrid synergistic flame retardant and its application in PP/IFR

A novel inorganic-organic hybrid synergistic flame retardant was prepared by sol-gel reaction and characterized by NMR and FT-IR. It showed that the fire resistance of polypropylene/intumescent flame retardant (PP/IFR) composites could be improved with the combination of hybrid synergistic flame retardant. The char morphology and structure of PP composites were characterized by SEM and Raman spectra. The influence of the hybrid flame retardant on the thermal degradation process of PP composites was analyzed by FT-IR and the rheological behavior of the PP composites was also evaluated. The thermal stability of PP composites was characterized by TGA, weight loss difference and integral procedural decomposition temperature (IPDT). It indicated that the hybrid synergistic flame retardant had good synergistic effect with IFR.     

Effect of acrylic polymer and nanocomposite with nano-SiO2 on thermal degradation and fire resistance of APP-DPER-MEL coating

Acrylic nanocomposite and flame retardant coatings with different acrylic polymers were prepared. The effect of molecular structure and molecular weight of acrylic resins and nanocomposite with nano-SiO₂ on the interaction and char formation of ammonium polyphosphate-dipentaerythritol-melamine (APP-DPER-MEL) coating was investigated using differential thermal analysis (DTA), thermogravimetry (TG), Limiting Oxygen Index (LOI), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and fire protection test. The interaction of APP, DPER, MEL and 3F-1 acrylic resin led to the formation of intumescent coherent char at 300-450 °C. Owing to low molecular weight and lack of benzene rings, F-963 acrylic resin decomposed at lower temperature than APP, and hence their endothermic interaction was destroyed. The well-distributed nano-SiO₂ particles in acrylic nanocomposite could modify char formation and anti-oxidation of char structure at high temperature. It is noted that the fire protection properties of nanocoating with acrylic nanocomposite were better than those of flame retardant coatings with conventional acrylic resins.     

Performance and mechanisms of fire retardants in polymers—A review

The fundamental mechanisms by which fire retardant additives can interrupt the self-sustained combustion cycle of organic polymers are reviewed. Evaluation of fire retardant performance and methods used for mechanism assessment are discussed. Examples are given of recent mechanistic studies of halogen-based and intumescent systems indicating that some previous generalisations should be revised. It is shown that a deeper understanding of fire retardance mechanisms acquired through detailed thermal degradation studies is the only way to answer the ever increasing demand for polymeric materials characterised by minimised overall fire hazard.     

Neutralized flame retardant phosphorus agent: Facile synthesis, reaction to fire in PP and synergy with zinc borate

A neutralized intumescent fire retardant (NIFR) has been synthesized in “one step and one pot” using a simple, novel and safe protocol. The fire retardant efficiency of the NIFR in polypropylene (PP) has been evaluated using usual fire testing methods. The results show that the NIFR is very effective. Moreover, we demonstrate that zinc borate exhibits a synergistic effect on fire retardant properties and apparently prevents migration of the additives through the polymer matrix.     

Effects of carbon nanotubes on the thermal stability and flame retardancy of intumescent flame-retarded polypropylene

Flame retardant mixtures of carbon nanotubes (CNTs) and intumescent flame retardant (IFR) were embedded in polypropylene (PP) to investigate what will happen if the additives exhibit two different flame retardation mechanisms. TEM tests showed that CNTs dispersed homogenously in PP matrix without any visible agglomeration. The effects of CNTs on thermal stability and flammability of PP were investigated by thermogravimetry (TG) and cone calorimetry tests, respectively. Results indicated that the introduction of CNTs only enhanced thermal stability of materials in a certain temperature range, but caused a severe deterioration of flame retardancy due to the interaction of the network structure and the intumescent carbonaceous char. Furthermore, conditions for an intumescent flame retardation system to behave with high efficiency were also discussed by a secondary combustion test.     

阻燃及可瓷化硅橡胶成炭结构的研究进展

简单介绍了硅橡胶的阻燃和瓷化机理。依据阻燃剂、填料及炭层结构的不同,将硅橡胶分为阻燃和可瓷化两大类,综述了阻燃硅橡胶和可瓷化硅橡胶的阻燃性能和成炭结构的研究进展。分析表明:添加物理或化学膨胀型阻燃剂的硅橡胶,燃烧过程中形成的炭层疏松多孔,阻燃隔热性能优异,但炭层强度差;添加非膨胀型阻燃剂的硅橡胶,炭层结构相对密实,但表面不平整,存在孔洞和裂缝,阻燃效果不好;添加可瓷化填料的硅橡胶燃烧形成的陶瓷炭层坚硬而致密,具有优异的耐火持久性,但在隔绝热量方面不如膨胀炭层。炭层的疏松隔热与坚固耐久兼顾是阻燃硅橡胶未来可能的发展方向。     

Effect of metal chelates on the ignition and early flaming behaviour of intumescent fire-retarded polyethylene systems

Polyethylene (PE) was treated with various formulations containing an intumescent fire retardant, which consists of melamine phosphate (MP), pentaerythritol (PER) and ammonium polyphosphate (APP), and one or none of following metal chelates: CuSAO, CoSAO and NiSAO. The behaviour of this intumescent system can be enhanced significantly by the addition of small amounts (0.2%) of metal chelate (CuSAO, CoSAO and NiSAO). The thermal stabilization, burning behaviour and char formation of the fire retardant PE system have been investigated by TGA, LOI, UL-94 test, SEM and cone calorimetry. All formulations studied provide good fire retardant behaviour, with LOI ≥ 27.4 and UL-94 V-0 rating. TGA results present more complicated thermal decomposition behaviour after the addition of small amounts (0.2%) of metal chelate when compared to that of PE-IFR. Cone calorimetry of PE-IFR–metal chelate (PE-IFR–CuSAO, PE-IFR–CoSAO and PE-IFR–NiSAO) shows a very significant decrease in HRR, PHRR, ML, THR and a very significant improvement of TTI compared to samples without metal chelate. Furthermore, SEM and photographs of the char layer show that the char layer from PE-IFR–metal chelate has a compact and tough char structure compared to the open porous char layer produced by sample without metal chelate.     

Halogen-free flame retardant PUF: Effect of melamine compounds on mechanical, thermal and flame retardant properties

Water blown rigid polyurethane foam (PUF) was prepared with melamine polyphosphate (MPP) and melamine cyanurate (MC) as fire retardant (FR) additives. The effect of these additives on the properties of rigid PUF such as physico-mechanical, morphological, thermo-oxidative stability, flame retardancy and smoke density properties were studied. The mechanical and thermo-oxidative stability of PUF filled with MC was found to be better than those of MPP filled PUF. The insulation property of both MPP and MC filled PUF was improved with respect to the neat PUF. The FR properties of these filled PUF were evaluated by cone calorimeter, limiting oxygen index (LOI), smoke density, rate of burning and char residue estimation. The FR property of MPP filled PUF was better than that of the MC filled PUF.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of clay containing intumescent polypropylene nanoclay composites

The functions of nanoclay and three different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), and boron silicon containing preceramic oligomer (BSi), were studied to improve the flame retardancy of polypropylene (PP)‐nanoclay‐intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis (TGA), and cone calorimeter. According to the results obtained, the addition of 20 wt% intumescent flame retardant (IFR) improved the flame retardancy by increasing the char formation. Addition of clay slightly increases the LOI value and reduces the maximum heat release rate (HRR). Addition of clay also increases the barrier effect due to intumescent char, especially in thin samples. Boron compounds show their highest synergistic effect at about 3 wt% loading. According to UL‐94 test and LOI test, 3 wt% ZnB containing composite shows the highest rating (V0) and BPO₄ containing sample shows the highest LOI value (26.5). Copyright © 2010 John Wiley & Sons, Ltd.     

Fire protection of polypropylene and polycarbonate by intumescent coatings

An innovative way to improve fire‐retardant properties of different polymers by applying intumescent coatings on their surface has been studied. Two polymers have been investigated: polypropylene and polycarbonate. The surfaces were first subjected to a flaming treatment in order to clean them and to increase their wettability and thus improve the adhesion of the coatings. Two different formulations were then applied: a transparent intumescent varnish, based on an acrylic resin, and an intumescent coating based on polyvinylacetate resin. Different parameters have been obtained using several fire tests. The cone calorimeter, the limiting oxygen index and UL94 tests have been carried out to evaluate the fire‐retardant properties obtained for both the intumescent coating and the intumescent varnish. Results clearly evidence an outstanding improvement of the fire‐retardant properties using intumescent coatings without any incorporation of flame retardants in the bulk. Copyright © 2010 John Wiley & Sons, Ltd.     

Synergistic effect of zeolite 4A on thermal,mechanical and flame retardant properties of intumescent flame retardant HDPE composites

The combination of synergistic agent with intumescent flame retardant (IFR) systems provides a promising way to prepare high performance IFR composites. In this study, the effects of the synthetic zeolite 4 A in combination with the IFR system consisting of ammonium polyphosphate (APP) and tris (2-hydroxyethyl) isocynurate (THEIC) on thermal degradation, mechanical properties, flame retardancy and char formation of high-density polyethylene composites were investigated by limiting oxygen index (LOI) measurement, cone calorimetry, scanning electron microscopy and laser Raman spectroscopy. The LOI value of HD/FR/Z-0.5 composite with an optimum content of 0.5 wt. % zeolite 4 A and 25 wt. % of total flame retardant reaches 26.3 %. A low loading of zeolite 4 A can improve the bench-scale combustion performance as determined by cone calorimetry, and promote the formation of more compact char residue with a highly graphitic structure. However, a low loading of zeolite in combination with the IFR system consisting of APP and THEIC produces no significant changes in mechanical performance.