Electrochemical determination of meloxicam in pharmaceutical preparation and biological fluids using oxidized glassy carbon electrodes

The adsorptive and electrochemical behaviors of meloxicam (MLC) was investigated on a glassy carbon electrode that was electrochemically treated by anodic oxidation at +1.8 V, following potential cycling in the potential range from -0.8 to 1.0 V vs. Ag/AgCl reference electrode. The resulting electrode showed a good activity to improve the electrochemical response of the drug. MLC was accumulated at an electrochemically activated glassy carbon electrode (phosphate buffer pH 6) in a certain time and then determined by linear sweep voltammetry. The oxidative peak currents showed a linear function in the concentration ranges of 0.02 to 10 microM using a 240 s preconcentration time. The preconcentration medium-exchange approach was utilized for the selective determination of the drug in spiked urine and plasma samples with satisfactory results. The recovery values of the proposed method obtained 105% (RSD 2.5%) and 100% (RSD 1.8%) for urine and plasma samples, respectively. Also, the proposed method has been successfully used for determination of MLC in tablets.     

Electrochemical behavior and determination of clozapine on a glassy carbon electrode modified by electrochemical oxidation.

The adsorptive and electrochemical behaviors of clozapine (CLZ) were investigated on a glassy carbon electrode that was electrochemically treated by anodic oxidation at +1.8 V, following potential cycling in the potential range from -0.8 to 1.0 V vs. Ag/AgCl reference electrode. Based on the obtained electrochemical results, an electrochemical-chemical (EC) mechanism was proposed to explain the electrochemical oxidation of CLZ. The resulting electrochemically pretreated glassy carbon electrode (EPGCE) showed good activity to improve the electrochemical response of the drug. CLZ was accumulated in a phosphate buffer (pH 6) at a certain time, and then determined by differential pulse voltammetry. The anodic and cathodic peak currents showed a linear function in the concentration ranges of 0.1 - 1, 1 - 10 and 10 - 100 microM with various accumulation times. The proposed method was successfully used for the determination of CLZ in pharmaceutical preparations. The preconcentration medium-exchange approach was utilized for the selective determination of the drug in spiked urine samples with satisfactory results. The recovery levels of the method reached 96% (RSD, 1.8%) and 90% (RSD, 2.8%) for urine and plasma samples, respectively.     

Adsorptive potentiometric stripping analysis of trace tamoxifen at a glassy carbon electrode

A highly sensitive adsorptive stripping procedure for trace measurement of the anticancer drug tamoxifen is described. The method is based on controlled adsorptive accumulation of the drug at an electrochemically treated glassy carbon electrode, followed by chronopotentiometric measurement of the surface species. The chronopotentiometric operation effectively addresses the large background contribution inherent to the glassy carbon electrode to yield a detection limit of 4 x 10(-10) M after 4 min preconcentration. The adsorptive stripping response is evaluated with respect to electrode type and conditioning, accumulation potential and time, stripping current, pH, drug concentration, potential interferences, and other variables. Applicability to urine samples is illustrated.     

Adsorptive behavior and electrochemical determination of the anti-fungal agent ketoconazole

The adsorptive properties and electrochemical behavior of ketoconazole, an oral anti-fungal agent, are demonstrated at a glassy carbon electrode. The adsorption of the compound obeys the Frumkin isotherm with an interaction factor (alpha) of 0.985 and adsorptive coefficient (beta) of 1.98 x 10(6) L mol(-1). The Gibbs energy of adsorption (deltaG) is -3.59 x 10(4) J mol(-1) at 25 degrees C. A very sensitive electroanalytical method has been developed for determination of the drug with a detection limit of 4.0 x 10(-11) mol L(-1). Relationships between stripping current and concentration of ketoconazole were linear in the range 10(-6)-10(-10) mol L(-1) with different preconcentration periods. The method has been used to measure the ketoconazole content of tablets.     

Quantification of terbutaline in pharmaceutical formulation and human serum by adsorptive stripping voltammetry at a glassy carbon electrode

The electrochemical oxidative behavior of terbutaline at the glassy carbon electrode was studied in a series of the Britton-Robinson buffer of pH 2--11. Cyclic and square-wave voltammograms of terbutaline at the pH values 相似文献   

Adsorptive Cathodic Stripping Voltammetry for Quantification of Alprazolam

A simple and highly sensitive electrochemical sensor was developed for adsorptive cathodic stripping voltammetry of alprazolam. Based on an electrochemically pretreated glassy carbon electrode, the sensor demonstrated good adsorption and electrochemical reduction of alprazolam. The morphology of the glassy carbon electrode and the electrochemically pretreated glassy carbon electrode were characterized by scanning electron microscopy/energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The electrochemical behaviors of alprazolam were determined by cyclic voltammetry, and the analytical measurements were studied by adsorptive cathodic stripping voltammetry. Optimized operational conditions included the concentration and deposition time of sulfuric acid in the electrochemical pretreatment, preconcentration potential, and preconcentration time. Under optimal conditions, the developed alprazolam sensor displayed a quantification limit of 0.1 mg L⁻¹, a detection limit of 0.03 mg L⁻¹, a sensitivity of 67 µA mg⁻¹ L cm⁻² and two linear ranges: 0.1 to 4 and 4 to 20 mg L⁻¹. Sensor selectivity was excellent, and repeatability (%RSD < 4.24%) and recovery (82.0 ± 0.2 to 109.0 ± 0.3%) were good. The results of determining alprazolam in beverages with the developed system were in good agreement with results from the gas chromatography–mass spectrometric method.     

Trace measurements of the antineoplastic agent methotrexate by adsorptive stripping voltammetry

An extremely sensitive voltammetric method is presented for trace measurement of the cancer chemotherapy drug methotrexate. The method is based on controlled adsorptive preconcentration of methotrexate on the hanging mercury-drop electrode, followed by voltammetric determination of the surface species. Cyclic voltammetry was used to explore the interfacial behaviour. The adsorptive stripping response was evaluated with respect to preconcentration time and potential, pH, concentration dependence, stripping mode, possible interferences, and other variables. The detection limit found was 2 x 10(-9)M (5-min preconcentration), the response was linear, and the relative standard deviation (at the 1.6 x 10(-7)M level) 2.2%. Sensitive adsorptive stripping measurements were also obtained by use of a carbon-paste disk electrode. Applicability to urine analysis is illustrated.     

Adsorptive preconcentration for voltammetric measurements of trace levels of chlorprothixene

The psychotherapeutic drug chlorprothixene is shown to adsorb strongly onto a glassy carbon surface in an open circuit. By using this phenomenon to preconcentrate the drug at a glassy carbon electrode prior to differential-pulse voltammetric measurements, sensitivity at the ppb level is readily achieved. The adsorptive stripping response was evaluated with respect to electrolyte, solution pH, accumulation time, concentration dependence and other variables. A linear peak current-concentration relationship was observed up to 1 microgram ml-1 of chlorprothixene; the relative standard deviation (at the 0.6 microgram ml-1 level) is 3.2%. For a preconcentration time of 10 min, the detection limit was found to be 2 ng ml-1. The open circuit preconcentration/medium exchange/voltammetric scheme was used to eliminate interference from sample solutions. The application of the method to human urine samples is described.     

Voltammetric analysis of ceftazidime after preconcentration at various mercury and carbon electrodes: application to sub-ppb level determination in urine samples

The electrochemical behavior of ceftazidime (CFZ) at four different kinds of electrodes viz. static mercury drop electrode (SMDE), controlled growth mercury electrode (CGME), glassy carbon electrode (GCE) and carbon paste electrode (CPE) has been presented. Optimal operational parameters have been selected for the drug preconcentration and determination in aqueous medium. Down to 2x10(-10) M CFZ is achieved as detection limit at the CGME. Modification of the CPE with polyvinyl alcohol (PVA) enhances both the sensitivity and selectivity for the drug accumulation and, therefore, its determination at very low levels. Application of the proposed method for CFZ analysis in spiked urine samples or those taken after metabolism has been easily assessed. Down to 1x10(-9) M CFZ (0.695 ng ml(-1)) could be easily achieved in such samples.     

New automatized method with amperometric detection for the determination of azithromycin

A FIA-amperometric method for azithromycin determination was developed. A working glassy carbon electrode and a Ag/AgCl/NaCl (3 M) reference electrode were used. The determination is based on the electrochemical oxidation of the azithromycin at 0.9 V in Britton-Robinson buffer solution (pH 8.0). Due to the adsorption of the reaction products on the electrode surface, an effective cleaner cycle was implemented. By using the optimum chemical and FIA conditions, a concentration linear range of 1.0-10.0 mg L⁻¹ and a detection limit (LOD) of 0.76 mg L⁻¹ are obtained. The method was validated and satisfactorily applied to the determination of azithromycin in pharmaceutical formulations.     

Voltammetric measurement of haloperidol following adsorptive accumulation at glassy-carbon electrodes

A sensitive stripping voltammetric method is reported for trace measurement of the psychotherapeutic drug haloperidol. The method is based on adsorptive preconcentration of haloperidol on the glassy-carbon electrode in an open circuit, followed by medium exchange and voltammetric determination of surface species. Cyclic voltammetry was used to explore the adsorptive behaviour and the results obtained suggest that the adsorption of haloperidol corresponds to the Frumkin-type isotherm. The adsorptive stripping response was evaluated with respect to stripping mode, electrolyte. pH, preconcentration time, concentration dependence, possible interference and other variables. The detection limit was 1.3 x 10(-9)M (10 min preconcentration) and the response was linear. The relative standard deviation (at the 1.3 x 10(-6)M level) was 2.3%. Applicability to a patient's urine sample is illustrated.     

Trace measurements of colchicine by adsorptive stripping voltammetry

A highly sensitive voltammetric method for trace measurements of the alkaloid colchicine is described. The method is based on the controlled adsorptive accumulation of the drug at the hanging mercury drop electrode, followed by voltammetric determination of the surface species. The adsorptive stripping response is evaluated with respect to preconcentration time and potential, solution pH, voltammetric waveform and other variables. With a 10-min preconcentration, a detection limit of 1.3 x 10(-10)M is obtained. The relative standard deviation (at the 1 x 10(-7)M level) is 1.1%. Applicability to urine analysis is illustrated.     

Trace measurement of dipyridamole by adsorptive stripping voltammetry

A sensitive adsorptive stripping voltammetric method for trace measurement of dipyridamole in alkaline solution is described. The method is based on the adsorptive accumulation of the drug at the hanging mercury drop electrode, followed by linear sweep voltammetric determination. The response is evaluated with respect to percentage of ethanol, preconcentration time and potential, and concentration of NaOH. The detection limit of 1.0 x 10(-9)M is obtained under optimized conditions with a 5-min preconcentration. Applicability to injection, tablets and urine analysis is illustrated.     

Determination of hydralazine and metabolites in urine by liquid chromatography with electrochemical detection

The cyclic voltammetric behavior of hydralazine and its primary metabolites, the pyruvate and acetone hydrazones, was examined in the positive potential range at both conventional and electrochemically pretreated glassy carbon electrodes. The enhanced oxidations observed at the treated surface were used as the basis of amperometric electrochemical detection of the compounds following reversed-phase liquid chromatography. The detection limits so obtained at +0.75 V vs. Ag/AgCl (1, 3, and 5 ng injected, respectively) were comparable to those previously reported for absorption and fluorescence detection approaches employing derivatization/preconcentration procedures. For liquid chromatography with electrochemical detection, however, direct quantitation of all three species in urine samples was readily accomplished without any chemical derivatization or sample treatment operations other than particulate filtration.     

Simultaneous determination of torasemide and its major metabolite M5 in human urine by high-performance liquid chromatography-electrochemical detection.

A high-performance liquid chromatographic method with electrochemical detection is described for the simultaneous determination of the loop diuretic 1-isopropil-3-[4-(3-methylphenylamino)-3-pyridinesulphonyl]urea (torasemide) and its major metabolite M5 in human urine. The assay is simple, fast, and easy. It requires a sample cleanup consisting of a solid-phase extraction under acidic conditions followed by chromatographic separation with a C18 microBondapack column. The use of a water-acetonitrile mobile phase (80:20, v/v, pH 3) ensures total separation from urine-interfering substances, and both compounds can be quantitated amperometrically at a glassy carbon electrode set to +1300 mV versus Ag-AgCl. The method demonstrates linearity for both the parent drug and the metabolite over a wide concentration range (up to 7 microg/mL) and reproducibility with relative standard deviation lower than 2% in intraday and 5% in interday assays. The mean extraction recoveries are 78% for M5 and 60% for torasemide, and the limits of quantitation are 1 and 8 ng/mL, respectively. The method developed is applied to the analysis of healthy volunteers' urine samples collected at different time intervals after the oral ingestion of a single dose of 10 mg torasemide, and the results obtained are in agreement with the pharmacokinetic profile of torasemide.     

Determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with electrochemical detection.

The cyclic voltammetric behavior of acetaldehyde and the derivatized product with 2,4-dinitrophenylhydrazine (DNPHi) has been studied at a glassy carbon electrode. This study was used to optimize the best experimental conditions for its determination by high-performance liquid chromatographic (HPLC) separation coupled with electrochemical detection. The acetaldehyde-2,4-dinitrophenylhydrazone (ADNPH) was eluted and separated by a reversed-phase column, C18, under isocratic conditions with the mobile phase containing a binary mixture of methanol/LiCl(aq) at a concentration of 1.0 x 10(-3) M (80:20 v/v) and a flow rate of 1.0 mL min(-1). The optimum condition for the electrochemical detection of ADNPH was +1.0 V vs. Ag/AgCl as a reference electrode. The proposed method was simple, rapid (analysis time 7 min) and sensitive (detection limit 3.80 microg L(-1)) at a signal-to-noise ratio of 3:1. It was also highly selective and reproducible [standard deviation 8.2% +/- 0.36 (n = 5)]. The analytical curve of ADNPH was linear over the range of 3-300 mg L(-1) per injection (20 microL), and the analytical recovery was > 99%.     

Liquid Chromatographic Determination of Glutathione with Electrochemically Pretreated Glassy Carbon Electrode

Abstract

Simple electrochemical pretreatment of a glassy carbon electrode used as a working electrode in an electrochemical detector has been found to enhance the analytical capability of the detector for the determination of glutathione by lowering the required operating potential as well as by increasing the maximum oxidation current. The electrochemical pretreatment of the electrode was made in a 0.2 M phosphate buffer (KH₂PO₄-KOH, pH 6.5) at +1.9 V vs. Ag/AgCl for 2 min. The minimum detectable quantity of glutathione was found to be about 100 pg, when eluate from a reversed-phase column was amperometrically monitored by aid of the detector with the electrochemically pretreated glassy carbon electrode. Amount of glutathione in a rat lens was determined by the chromatographic method developed in this study.     

Determination of secnidazole in urine by adsorptive stripping voltammetry

Cyclic voltammetry was used to explore the adsorption behavior of secnidazole on a hanging mercury drop electrode (HMDE). The effects of various operational parameters on the accumulation behavior of the adsorbed species were tested. Thus, a sensitive stripping voltammetry procedure for the determination of secnidazole with an adsorptive accumulation on the surface of HMDE has been developed. Measurements were taken by differential-pulse voltammetry after determination of the optimum conditions. The linear concentration range was 1 x 10(-8)-1 x 10(-7) s when using a 120 s preconcentration at -0.1 V vs. Ag/AgCl in acetate buffer of pH 4.0. The detection limit of secnidazole was 5 x 10(-9) M. The precision, expressed by the coefficient of variation, was 2.5% (n = 10) at a concentration of 1 x 10(-7) m. The method was successfully applied to the analysis of secnidazole in urine.     

Square-wave adsorptive stripping voltammetric determination of antihypertensive agent telmisartan in tablets and its application to human plasma

The adsorptive stripping voltammetry of telmisartan was investigated with a hanging mercury drop electrode. This compound produced a catalytic hydrogen wave at ?1.5 V in Britton Robinson buffer of pH 10.38, and the peak current increased with adsorptive accumulation at the electrode. Adsorptive stripping voltammetry with the catalytic hydrogen wave could provide a sensitive novel method for the determination of telmisartan. Various chemical and instrumental parameters affecting the monitored electroanalytical response were investigated and optimized for telmisartan determination. Under these optimized conditions the square-wave adsorptive stripping voltammetric (SW-AdSV) peak current showed a linear dependence on drug concentration over the range 0.05–3.00 μg/mL (1 × 10^?7?6 × 10^?6 M) (r = 0.999) with accumulation for 120 s at ?1.0 V vs. Ag/AgCl. The proposed electrochemical procedure was successfully applied for the determination of telmisartan in pharmaceutical tablets and human plasma. The results of the developed SW-AdSV method were comparable with those obtained by reported analytical procedures.     

Development of a high-performance liquid chromatographic method with electrochemical detection for the determination of hyperforin

An HPLC method with electrochemical detection for the determination of hyperforin extracts without using additional sample precleaning has been developed and validated. The hyperforin solutions were separated isocratically using a mobile phase consisting of 10% ammonium acetate buffer (0.5 M, pH 3.7)-MeOH-acetonitrile (10:40:50, v/v) at a flow rate of 0.8 mL/min. Hyperforin was detected amperometrically with a glassy carbon electrode at a potential of +1.1 V versus Ag/AgCl/3 M potassium chloride reference electrode. Under these conditions, a plot of integrated peak area versus concentration of hyperforin was found to be linear over the range of 0.054-5.4 microg/mL, with a relative standard deviation of 2.2-8.6%. The limit of detection was 0.050 ng on column. The determination of the hyperforin content in a commercially available St. John's Wort preparation exhibited a mean content of 1.56 mg. Recovery experiments led to a mean recovery rate of 97 +/- 5.8%. The proposed method is not time-consuming, sensitive and reproducible and is therefore suitable for routine analysis of hyperforin in herbal medicinal products.