Biomolecule-quantum dot systems for bioconjugation applications

In the present work, it is reported for the first time the bioconjugation of CdS quantum dots (QDs) directly with bovine serum albumin (BSA) using a one-step procedure via aqueous route at room temperature by methods of colloidal chemistry. Essentially, the bioconjugates were developed based on BSA as capping ligand for the nucleation and stabilization of CdS nanoparticles using cadmium perchlorate and thioacetamide as precursors. UV-visible spectroscopy was used to characterize the kinetics and the relative stability of CdS nanoparticles. The CdS nanocrystals were produced with the calculated average particle size below 4.0 nm, indicating they were in the so-called "quantum-size confinement range". The results have clearly indicated that BSA was effective on nucleating and stabilizing the colloidal CdS quantum dots.     

Spontaneous surface flattening via layer-by-layer assembly of interdiffusing polyelectrolyte multilayers

We report a facile means to achieve planarization of nonflat or patterned surfaces by utilizing the layer-by-layer (LbL) assembly of highly diffusive polyelectrolytes. The polyelectrolyte pair of linear polyethylenimine (LPEI) and poly(acrylic acid) (PAA) is known to maintain intrinsic diffusive mobility atop or even inside ionically complexed films prepared by LbL deposition. Under highly hydrated and swollen conditions during the sequential film buildup process, the LbL-assembled film of LPEI/PAA undergoes a topological self-deformation for minimizing surface area to satisfy the minimum-energy state of the surface, which eventually induces surface planarization along with spontaneous filling of surface textures or nonflat structures. This result is clearly different from other cases of applying nondiffusive polyelectrolytes onto patterned surfaces or confined structures, wherein surface roughening or incomplete filling is developed with the LbL assembly. Therefore, the approach proposed in this study can readily allow for surface planarization with the deposition of a relatively thin layer of polyelectrolyte multilayers. In addition, this strategy of planarization was extended to the surface modification of an indium tin oxide (ITO) substrate, where surface smoothing and enhanced optical transmittance were obtained without sacrificing the electronic conductivity. Furthermore, we investigated the potential applicability of surface-treated ITO substrates as photoelectrodes of dye-sensitized solar cells prepared at room temperature. As a result, an enhanced photoconversion efficiency and improved device characteristics were obtained because of the synergistic role of polyelectrolyte deposition in improving the optical properties and acting as a blocking layer to prevent electron recombination with the electrolytes.     

Effect of precursor-layer surface charge on the layer-by-layer assembly of polyelectrolyte/nanoparticle multilayers

In this Article, we investigate the effect of a precursor layer, which is composed of four bilayers of polyethyleneimine (PEI) and poly(sodium styrene sulfonate) (PSS), on the subsequent LBL assembly of hybrid films composed of indium tin oxide (ITO) nanoparticles and PSS. A precursor polyelectrolyte layer is usually deposited to minimize interference by the substrate. It is shown here that the "effective" surface charge of the precursor layer can significantly affect the subsequent assembly behavior of [ITO/PSS](9.5) hybrid thin films. Depending on the surface charge of the precursor layer, the subsequent LbL assembly of [ITO/PSS](9.5) hybrid films can exhibit either one or two regimes. When two growth regimes are present, the first one consists of a "recovery regime", and the second is the expected "linear growth regime." The length of the "recovery regime" is dependent on how much positive charge the precursor layer possesses and how fast this surface charge can be compensated. This work reveals for the first time that changes in the surface charge of the precursor layer can have a significant effect on the subsequent LBL assembly process. The surface charge of the precursor layer was investigated using ζ-potential measurements on model silica microspheres. These experiments showed that the surface charge of the precursor layer, [PEI/PSS](4), is dependent on the pH of the solution in which it is immersed, and that it can reverse from a negatively charged surface to a positively charged one, at sufficiently low pH due to the protonation of PEI, despite having the negatively charged PSS layer as the outermost layer.     

Disintegration-controllable stimuli-responsive polyelectrolyte multilayer microcapsules via covalent layer-by-layer assembly

The disintegration-controllable stimuli-responsive polyelectrolyte multilayer microcapsules have been fabricated via the covalent layer-by-layer assembly between the amino groups of chitosan (CS) and the aldehyde groups of the oxidized sodium alginate (OSA) onto the sacrificial templates (polystyrene sulfonate, PSS) which was removed by dialysis subsequently. The covalent crosslinking bonds of the multilayer microcapsules were confirmed by FTIR analysis. The TEM analysis showed that the diameter of the multilayer microcapsules was <200nm. The diameter of the multilayer microcapsules decreased with the increasing of the pH values or the ionic strength. The pH and ionic strength dual-responsive multilayer microcapsules were stable in acidic and neutral media while they could disintegrate only at strong basic media.     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Preparation of multilayered CdSe quantum dot sensitizers by electrostatic layer-by-layer assembly and a series of post-treatments toward efficient quantum dot-sensitized mesoporous TiO2 solar cells

A multilayer of CdSe quantum dots (QDs) was prepared on the mesoporous surface of a nanoparticulate TiO(2) film by a layer-by-layer (LBL) assembly using the electrostatic interaction of the oppositely charged QD surface for application as a sensitizer in QD-sensitized TiO(2) solar cells. To maximize the absorption of incident light and the generation of excitons by CdSe QDs within a fixed thickness of TiO(2) film, the experimental conditions of QD deposition were optimized by controlling the concentration of salt added into the QD-dissolved solutions and repeating the LBL deposition a few times. A proper concentration of salt was found to be critical in providing a deep penetration of QDs into the mesopore, thus leading to a dense and uniform distribution throughout the whole TiO(2) matrix while anchoring the oppositely charged QDs alternately in a controllable way. A series of post-treatments with (1) CdCl(2), (2) thermal annealing, and (3) ZnS-coating was found to be very critical in improving the overall photovoltaic properties, presumably through a better connection between QDs, effective passivation of QD's surface, and a high impedance of recombination, which were proved by transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS) experiments. With a proper post-treatment of multilayered QDs as a sensitizer, the overall power conversion efficiency in the CdSe QD-sensitized TiO(2) solar cells could reach 1.9% under standard illumination condition of simulated AM 1.5G (100 mW/cm(2)).     

Direct determination of the thermodynamics of polyelectrolyte complexation and implications thereof for electrostatic layer-by-layer assembly of multilayer films

Interpolyelectrolyte complex (IPEC) formation between poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) has been studied over a range of ionic strengths by isothermal titration calorimetry (ITC), turbidity titration, and electrostatic layer-by-layer assembly (ELBL). The results indicate that IPEC formation of PSS/PAH in aqueous solution is predominantly entropy-driven. The thermodynamic parameters suggest the formation of different types of complexes and aggregates due to salt-induced conformational changes in the polyelectrolyte conformation. Differences in polyelectrolyte behavior in the different salt-concentration regimes are described in terms of changes in the Debye screening length of the polyelectrolytes. The relationship of the results to the effect of salt concentration on the assembly of polyelectrolyte multilayer films (PEMs) is discussed.     

PbS quantum dot sensitized anatase TiO2 nanocorals for quantum dot-sensitized solar cell applications

Lead sulphide (PbS) quantum dot (QD) sensitized anatase TiO(2) nanocorals (TNC) were synthesized by SILAR and hydrothermal techniques. The TNC, PbS and PbS-TNC samples were characterized by optical absorption, XRD, FT-IR, FESEM and XPS. The results show that PbS QDs are coated on the TNCs, the optical absorption is found to be enhanced and the band edge is shifted to ~693 nm as compared with plain TNCs at 340 nm. The PbS-TNC sample exhibits an improved photoelectrochemical performance with a maximum short circuit current (J(sc)) of 3.84 mA cm(-2). The photocurrent density was found to be enhanced 2 fold, as compared with those of the bare PbS photoelectrode. The total power conversion efficiency of the PbS-TNC electrodes is 1.23%.     

Inkjet-assisted layer-by-layer printing of quantum dot/enzyme microarrays for highly sensitive detection of organophosphorous pesticides

We present a facile fabrication of layer-by-layer (LbL) microarrays of quantum dots (QDs) and acetylcholinesterase enzyme (AChE). The resulting arrays had several unique properties, such as low cost, high integration and excellent flexibility and time–saving. The presence of organophosphorous pesticides (OPs) can inhibit the AChE activity and thus changes the fluorescent intensity of QDs/AChE microscopic dot arrays. Therefore, the QDs/AChE microscopic dot arrays were used for the sensitive visual detection of OPs. Linear calibration for parathion and paraoxon was obtained in the range of 5–100 μg L⁻¹ under the optimized conditions with the limit of detection (LOD) of 10 μg L⁻¹. The arrays have been successfully used for detection of OPs in fruits and water real samples. The new array was validated by comparison with conventional high performance liquid chromatography-mass spectrometry (HPLC-MS).     

Building three-dimensional nanostructures with active enzymes by surface templated layer-by-layer assembly

We show that well-defined three-dimensional nanostructures of functional enzymes can be controllably fabricated by layer-by-layer assembly of avidin and biotinylated horseradish peroxidase on micro-contact printing patterned surface templates.     

Correlation of antithrombogenicity and heat treatment for layer-by-layer self-assembled polyelectrolyte films

Antithrombogenic films with high durability were fabricated in a wet process. Antithrombogenicity was achieved with polyelectrolyte multilayer thin film prepared from poly(vinyl alcohol)-poly(acrylic acid) (PVA-PAA) blends, deposited in alternate layers with poly(allylamine hydrochloride) (PAH). Film durability, assessed by abrasion resistance and water resistance, was enhanced by forming cross-links via amide bonds induced by heat treatment of the film. The film was found to be resistant to protein adsorption, as measured by the amount of fibrinogen adsorbed from an aqueous solution. The antithrombogenic efficacy was assessed in ex vivo experiments by the ability of stainless steel mesh, coated with the polyelectrolyte and inserted into a pig blood vessel, to inhibit thrombus formation. Mesh coated with the polyelectrolyte did not reduce blood flow over a period of 15 min, whereas with uncoated mesh blood flow stopped within 6 min because of blood vessel blockage by thrombus formation.     

Spontaneous wrinkling of layer-by-layer assembled polyelectrolyte films for humidity-responsive superhydrophobicity

The fabrication of smart films with reversible wettability enabled by the stimulus-induced morphology changes has attracted growing interest but remains a challenge. Here we report a smart film that can reversibly changes its wettability between transparent hydrophobicity to translucent superhydrophobicity through the humidity-induced wrinkling/de-wrinkling process. The film was fabricated by depositing hydrophobic SiO₂ nanoparticles (NPs) on poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) films, followed by partially exfoliating the films from the underlying substrates. The partially exfoliated PAA/PAH film can reversibly wrinkle and de-wrinkle when being alternately subjected to humid and dry environments. The deposition of hydrophobic SiO₂ NPs on the wrinkling PAA/PAH film does not hinder the humidity-enabled wrin-kling/de-wrinkling ability of the composite film. The hydrophobic SiO₂ NPs and the underlying humidity-wrinkling PAA/PAH film enable the composite film to spontaneously change from hydrophobic and transparent to superhydrophobic and translucent with the rise of environmental humidity.     

A polyelectrolyte bearing metal ion receptors and electrostatic functionality for layer-by-layer self-assembly

A polyelectrolyte (BiPE) containing bipyridine ligands as metal ion receptors and quaternary ammonium groups is described, which can be assembled via electrostatic interactions or metal ion coordination. Electrostatic layer-by-layer self-assembly of BiPE with sodium poly(styrene sulfonate) (PSS) as oppositely charged component results in striated multilayers. The BiPE/PSS multilayers can reversibly bind and release transition metal ions including Fe(II), Ni(II), and Zn(II). Formation of 2-D arrays of metallo-units is achieved by μ-contact stamping transition metal salts onto the BiPE/PSS interface. Also, multilayers of BiPE are readily assembled through metal ion coordination. Due to the reversible nature of metal ion coordination, exposure of the multilayers to EDTA causes instant disassembly of the layer, a property needed to implement stimulus triggered release functions. The importance of metal ion coordination for multilayer formation is demonstrated by force-distance curves measured with AFM.     

Direct evidence of layer-by-layer assembly of polyelectrolyte multilayers on soft and porous temperature-sensitive PNiPAM microgel using fluorescence correlation spectroscopy

We describe the layer-by-layer assembly of polyelectrolyte multilayers on soft and porous temperature-sensitive poly(N-isopropylacrylamide) (PNiPAM) microgel. Microgels are not hard and rigid but rather are soft and porous particles, and polyelectrolytes not only interdigitate with each other during multilayer formation but also with the microgel. Because of this difference, there could be concerns about the feasibility of the layer-by-layer technique on these systems. The argument is that the layer being deposited is stripping the underlying layer instead of anchoring to the latter, and common methods of characterizing film growth on particles such as zeta-potentials will still show "successful" charge reversal. To address this issue, we used two differently labeled polyelectrolytes during the deposition. Because of the small size of the microgel (400 nm) studied, we cannot distinguish between polyelectrolytes adsorbed on or in the microgel. However, with fluorescence correlation spectroscopy, we can clearly distinguish between free labeled polyelectrolytes and those that are bound to the microgel. Dual-color correlation confirms the presence of both polyelectrolytes bound to the same particle while fluorescence imaging (on a dry sample) provides the visual proof.     

Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer

The improvement of hydrophilicity and hemocompatibility of poly(tetramethylene adipate-co-terephthalate) (PTAT) membrane was developed via polyelectrolyte multilayers (PEMs) immobilization. The polysaccharide PEMs included chitosan (CS, as a positive-charged and antibacterial agent) and dextran sulfate (DS, as a negative-charged and anti-adhesive agent) were successfully prepared using the aminolyzed PTAT membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of as-modified PTAT membranes reached to the steady value after four bilayers of coating, hence suggesting that the full coverage was achieved. It could be found that the PTAT–PEMs membranes with DS as the outmost layer could resist the platelet adhesion and human plasma fibrinogen (HPF) adsorption, thereby prolonging effectively the blood coagulation times. According to L929 fibroblast cell growth inhibition index, the as-prepared PTAT membranes exhibited non-cytotoxic. Overall results demonstrated that such an easy, valid and shape-independent processing should be potential for surface modification of PTAT membrane in the application of hemodialysis devices.     

Synthesis of compact multidentate ligands to prepare stable hydrophilic quantum dot fluorophores

We describe a simple and versatile scheme to prepare an array of heterofunctional multidentate ligands that permit strong and stable interactions with colloidal semiconductor nanocrystals (quantum dots, QDs) and render them soluble in aqueous environments. These ligands were synthesized by reacting various chain length poly(ethylene glycols) with thioctic acid, followed by ring opening of the dithiolane moiety, creating a bidentate thiol motif with enhanced affinity for CdSe-ZnS core-shell QDs. Functionalization with these ligands permits processability of the nanocrystals not only in aqueous but also in many other polar solvents. These ligands provide a straightforward means of preparing QDs that exhibit greater resistance to environmental changes, making them more amenable for use in live cell imaging and other biotechnological applications.     

Preparation parameter development for layer-by-layer assembly of Keggin-type polyoxometalates

Polyoxometalates possess many useful properties for electrochemical catalysis. These molecule-size clusters can be assembled into thin films through the layer-by-layer method. In this study, we determined a cluster concentration range within which layer-by-layer (LbL) films have been successfully fabricated. We also find the influence of salt added to the deposition solutions. In an attempt to understand the self-assembly process at the molecular level, thermodynamic arguments, derived from complexation between nanoscale particles and oppositely charged polyelectrolyte chains, have been employed to interpret the adsorption of polyoxometalate clusters onto a cationic polymer layer. The scaling results describe the contact mode between a polymer chain and a cluster. The assembly can be visualized with assistance by understanding the contact between the polymer chain and the cluster.     

Synthesis and photophysical properties of colloids fabricated by the layer-by-layer polyelectrolyte assembly onto Eu(III) complex as a core

The luminescent colloids have been synthesized through the layer-by-layer assembly of poly(sodium 4-styrenesulfonate) (PSS) and polyethyleneimine (PEI) onto the luminescent core. The latter has been obtained by the reprecipitation of complex Eu[(TTA)(3)1] (where TTA(-) and 1 are thenoyltrifluoroacetonate and 2-(5-chlorophenyl-2-hydroxy)-2-phenylethenyl-bis-(2-methoxyphenyl)phosphine oxide, respectively) from organic solvent to aqueous solution. The variation of Eu(III) complexes indicates the role of the complex core in the development of such core-shell colloids. Complex Eu[(TTA)(3)1] is most convenient precursor of Eu-doped luminescent nanocomposites. The fluorometric measurements at each step of the layer-by-layer polyelectrolyte assembly onto Eu[(TTA)(3)1] core, at various pHs and additives reveal the quenching of Eu-centered luminescence as a result of the interfacial interaction of the core and the dye. The AFM images and electrochemical behavior of PSS-(PEI-PSS)(n)-Eu[(TTA)(3)1] colloids deposited on the surface indicate the stability of the polyelectrolyte multilayer in the dried state.