Lab-on-paper-based devices using chemiluminescence and electrogenerated chemiluminescence detection

As an analytical support, paper, being low cost, highly abundant, of high porosity, disposable or biodegradable, and easy to use, store, transport, and print, has excellent chemical compatibility with many applications. Since the first microfluidic paper-based analytical device (μ-PAD or lab-on-paper) was proposed, the paper-based assay has never attracted as much attention as it does now. There has recently been rapidly increasing interest in using sensitive luminescence methods, for example chemiluminescence (CL) and electrogenerated chemiluminescence (ECL), as the detection strategy for lab-on-paper devices. Because of their intrinsic characteristics, CL and ECL provide outstanding performance while retaining the simplicity, low cost, multifunctionality, versatility, flexibility, and disposability of μ-PADs. The objective of this review is to cover the development of lab-on-paper-based devices using CL and ECL detection, including fabrication of paper devices, construction of sensing interfaces, signal amplification strategies, external instruments used, and applications. We believe that lab-on-paper devices with CL and ECL detection methods will meet the diverse requirements of point-of-care diagnosis.     

Solvent effects on chemiluminescence from the hydrogen peroxide-lucigenin reaction: Kinetics of light emission in mixed polar solvents

Summary The effect of reaction media composition on reaction kinetics was studied for the reaction of lucigenin (10,10-dimethyl-9,9-biacridinium nitrate) with hydrogen peroxide and alkali. Chemiluminescent emission as well as lucigenin disappearance were recorded in mixtures of water with the co-solvents methanol, ethanol, 1-propanol, dimethylsulfoxide, and dimethylformamide. The kinetic results (base and peroxide concentration influence on the reaction rate and the relative chemiluminescence yield) are very similar in all the reaction media, suggesting that the fundamental step in the disappearance of lucigenin and in light emission decay is HO ₂ ^– addition to lucigenin. Lucigenin can also disappear through dark reactions with OH^– or H₂O₂. The co-solvent acts as a catalyst for the reaction with HO ₂ ^– and increases both the initial chemiluminescence intensity and the decay rate constant.

---

Lösungsmitteleffekte bei der Chemilumineszenz der Wasserstoffperoxid-Lucigenin Reaktion. Kinetik der Lichtemission in gemischten polaren Lösungsmitteln

Zusammenfassung Es wurde der Einfluß der Zusammensetzung des Reaktionsmediums auf die Kinetik der Reaktion von Lucigenin (10,10-dimethyl-9,9-biacridiniumnitrat) mit Wasserstoffperoxid und Alkali untersucht. Die Emission der Chemilumineszenz und das Verschwinden von Lucigenin wurde in Mischungen von Wasser mit den Kosolventien Methanol, Ethanol, 1-Propanol, Dimethylsufoxid und Dimethylformamid gemessen. Die kinetischen Resultate (Einfluß der Basen- und Peroxid-Konzentration auf die Reaktionsgeschwindigkeit und die relative Chemilumineszenzausbeute) sind für alle Reaktionsmedien sehr ähnlich; das legt den Schluß nahe, daß der grundlegende Schritt im Verbrauch des Lucigenin unter Lichtemission die Addition von HO ₂ ^– an Lucigenin ist. Lucigenin kann auch über Dunkelreaktionen mit OH^– oder H₂O₂ verschwinden. Das Kosolvens agiert als Katalysator für die Rekation mit HO ₂ ^– und erhöht sowohl die anfängliche Chemilumineszenzintensität als auch die Zerfallsgeschwindigkeitskonstante.

     

Passive micromixer for luminol-peroxide chemiluminescence detection

This paper reports a microchip with an integrated passive micromixer based on chaotic advection. The micromixer with staggered herringbone structures was used for luminol-peroxide chemiluminescence detection. The micromixer was examined to assess its suitability for chemiluminescence reaction. The relationship between the flow rate and the location of maximum chemiluminescence intensity was investigated. The light intensity was detected using an optical fiber attached along the mixing channel and a photon detector. A linear correlation between chemiluminescence intensity and the concentration of cobalt(ii) ions or hydrogen peroxide was observed. This microchip has a potential application in environmental monitoring for industries involved in heavy metals and in medical diagnostics.     

Periodate determination by fia with chemiluminescence emission detection, and its application to ethylene glycol

A method for periodate determination is given which combines the rapidity of flow-injection analysis and the sensitivity of chemiluminescence (CL) detection. It is based on the CL emission generated during oxidation of pyrogallol by periodate, and gives a relative standard deviation of 3% and a detection limit of 350 ng with the instrumentation used. The method has been applied to determination of ethylene glycol, with a detection limit of 0.5 mumole. The accuracy of the method is quite good when the ethylene glycol is oxidized in unbuffered solutions, and the interference due to formaldehyde produced can be halved by prior addition of an appropriate amount of iodate. A throughput of 15 samples/min is possible, and the method is suitable for automation and remote control.     

Prediction of the detection ranges for HPLC-peroxyoxalate chemiluminescence detection system of fluorescent compounds

Summary A manual method for predicting the detection ranges of fluorescent compounds for the HPLC-peroxyoxalate chemiluminescence detection system is presented utilizing bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) as a chemilumigenic reagent. The generated chemiluminescence decay curves were measured on a photomultiplier and extrapolated to zero time based on the first part of the decay curve. Dipyridamole, perylene, DNS-Ser, Rose Bengal, DNS-Asp, Trp-P-1, pyrencarboxylic acid methyl ester, perfenazine, alimemazine, oxypertine, Glu-P-2, benzydamine and doxorubicin gave chemiluminescence intensity (Icl) values of 3.2 × 10⁶, 2.8 × 10⁶, 2.3 × 10⁵, 2.1 × 10⁵, 1.9 × 10⁵, 1.4 × 10⁵, 9.4 × 10³, 6.2 × 10³, 4.2 × 10³, 3.3 × 10³, 2.3 × 10³, 9.7 × 10² and 3.1 × 10², respectively. The reaction conditions for the HPLC-CL detection system were investigated and optimum conditions obtained.     

Procedures for the enhancement of selectivity in liquid phase chemiluminescence detection

An overview of liquid phase chemiluminescence (CL) processes is presented and the potential for CL detection in liquid chromatography (LC) is discussed, with particular reference to the luminol and peroxyoxalate reactions. Post column ion displacement from a solid phase reagent [a cation exchange resin in the copper(II) form] followed by catalysis of the luminol reaction is used for the quantification of mixtures of weak acids after separation by ion-exclusion chromatography. Polyaromatic hydrocarbons (PAHs) released during the combustion of biomass fuels are separated by reversed-phase chromatography and quantified by their sensitizing effect on the peroxyoxalate reaction. This procedure is also used for the determination of carboxylic acids in non-aqueous media after selective pre-column derivatization with a fluorescent label (9-anthracenemethanol).     

Evaluation of fluorescent compounds for peroxyoxalate chemiluminescence detection

The behaviour of 19 fluorescent compounds of various types in peroxyoxalate chemiluminescence reactions was studied in terms of the relation of their excitation efficiency to their singlet excitation energy and oxidation potential. Compounds having low singlet excitation energy and low oxidation potential were excited effectively. As a result of the study, 3-aminoperylene was selected as a fluorophore for derivatization of simple car?ylic acids. The derivatives were separated by reversed-phase microbore h.p.l.c. and were detected by a peroxyoxalate chemiluminescence reaction detector. The detection limit was 0.1 fmol.     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

Aryl oxalate chemiluminescence detection for high-performance liquid chromatography

Aryl oxalate chemiluminescence detection for high-performance liquid chromatography offers ultrahigh sensitivity for interactive fluorophores. With optimal analytes, attomole limits of detection can be obtained with conventional instrumentation     

Comparison between spectrophotometric and chemiluminescence detection in enzyme immunoasays for nortestosterone

Steroid solid-phase immunoassays with peroxidase labels were examined with two detection methods. Immunoassays were applied for 19-nortestosterone (NT) by using a solid phase coated with a second antibody and a solid phase coated directly with NT-antibody. For end-point detection, either an enzyme-enhanced chemiluminescence procedure or spectrophotometry based on tetramethylbenzidine was used. Both methods gave similar calibration graphs. The chemiluminescence procedure, in which a new commercial microtitre-plate luminometer was used, was more sensitive and the second-antibody immunoassays provided lower limits of detection.     

Semiconductors interfacing polymers for light emission

The repertoire of polymers used for light emission has widened recently to include polymers of higher ionization potential and electron affinity. However, the corresponding repertoire of contact materials, including one semiconductor, commonly applied to these polymers has not changed, remaining better suited to the original PPV type polymers. In principle, additional semiconductors could be useful with this wider range of polymers, enabling better energy level matching. In this connection, interfacial effects will have to be considered carefully, however. The potential range of energy levels obtainable with commonly available semiconductors is surveyed and various criteria discussed which could guide selection of suitable semiconductor substrates and, in some cases, evaporated top contacts. A particularly relevant criterion may come from the recent development of epitaxial growth of organic crystals on non-pseudomorphic substrates. Semiconductors that appear favorable from these criteria include GaN and the Zn and Hg chalcogenides.     

基于聚苯乙烯微球放大的凝血酶化学发光检测新技术

本文以羧基96孔板为分离载体,核酸适配体作为分子特异性识别元件,聚苯乙烯微球作为放大载体,辣根过氧化物酶为标记物,构建了化学发光（CL）高灵敏度凝血酶检测新技术.实验结果表明：该放大技术不但灵敏度高,且抗干扰能力强,其他蛋白质如IgG、IgM、IgA、IgE、IFN均无明显干扰.聚苯乙烯微球放大体系中凝血酶的线性范围为7.8～250pmol/L,最低检测浓度可达3.9pmol/L;而不放大检测技术的线性范围为0.94～30nmol/L,最低检测浓度为0.46nmol/L,放大体系将检测灵敏度提高100多倍.综合而言,基于适配体识别和聚苯乙烯微球放大的凝血酶CL检测新技术具有通量大、简单快速和灵敏度高的特点,有望在凝血酶高通量检测领域获得应用.     

Surface molecular imprinting for chemiluminescence detection of the organophosphate pesticide chlorpyrifos

We report on a surface molecular imprinting strategy for synthesizing core-shell particles whose shell is imprinted with chlorpyrifos (CPF). The particles were prepared by copolymerization of the methacryloyl groups on the surface of silica particles modified with 3-methacryloxypropyl trimethoxysilane a functional monomer and a cross-linking agent. The imprinted particles exhibit larger binding capacity, faster binding kinetics, and higher recognition selectivity for CPF. Combined with highly sensitive chemiluminescence assay, the method was applied to the determination of CPF with a detection limit of 0.92?nM which is about 2 orders of magnitude lower than that by conventional CL method. The method also displays repeatability for more than 200 times.

Molecular imprinted polymer-based chemiluminescence imaging sensor for the detection of trans-resveratrol

Sensitive, rapid and inexpensive chemiluminescence (CL) imaging has been developed based on molecular imprinted polymer (MIP) sensing elements. Imprinted uniform microspheres were synthesized by precipitation polymerization. Microtiter plates (96 wells) were coated with polymer microspheres imprinted with trans-resveratrol, which were fixed in place using poly(vinyl alcohol) (PVA) as glue. The amount of polymer-bound trans-resveratrol was quantified using imidazole (IMZ)-catalyzed peroxyoxalate chemiluminescence (PO-CL) reaction. The light produced was then measured with a high-resolution CCD camera. Calibration curve corresponding to analyte concentration ranging from 0.3 to 25 μg mL⁻¹ was obtained with a limit of detection 0.1 μg mL⁻¹. These results showed that the MIP-based CL imaging sensor can become a useful analytical tool for quick simultaneous detection of trans-resveratrol in a large number of real samples.     

Application of chemiluminescence for the detection of peroxy compounds in high-performance liquid chromatography

The possibility of applying post-column reaction and chemiluminescence to determine organic peroxy compounds by RP-HPLC was investigated. Conditions of qualitative and quantitative analyses have been established. The applicability of the method has been demonstrated for a series of compounds representative of the most important groups of peroxy-type compounds, that is, hydroperoxides, dialkyl peroxides, diacyl peroxides, peroxyesters, and peroxyacids.     

Electrogenerated chemiluminescence detection of single entities

Electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), is an electrochemically induced production of light by excited luminophores generated during redox reactions. It can be used to sense the charge transfer and related processes at electrodes via a simple visual readout; hence, ECL is an outstanding tool in analytical sensing. The traditional ECL approach measures averaged electrochemical quantities of a large ensemble of individual entities, including molecules, microstructures and ions. However, as a real system is usually heterogeneous, the study of single entities holds great potential in elucidating new truths of nature which are averaged out in ensemble assays or hidden in complex systems. We would like to review the development of ECL intensity and imaging based single entity detection and place emphasis on the assays of small entities including single molecules, micro/nanoparticles and cells. The current challenges for and perspectives on ECL detection of single entities are also discussed.

We summarize the history and recent development that has been made in the ECL detection of single entities.     

Evaluation of aryl oxalates for chemiluminescence detection in high-performance liquid chromatography

The chemiluminescence reaction between an aryl oxalate, hydrogen peroxide and a fluorescent compound is well known for use in h.p.l.c. post-column reactors. Here, several aryl oxalates are evaluated for this purpose in terms of intensity, rate of chemiluminescence decay, solubility in different solvents, and stability in the presence of hydrogen peroxide. Five oxalates are selected for different pH ranges of column eluates: bis(pentafluorophenyl) oxalate for pH < 2, bis(2,4-dinitrophenyl) oxalate for pH 2–4, bis(2-nitrophenyl) oxalate for pH 4–6, bis(2,4,6-trichlorophenyl) oxalate for pH 6–8, and bis(2,4,5-trichlorophenyl-6-pentyloxycarbonyl) oxalate for pH > 8.     

Factorial analysis of a chemiluminescence system for bromate detection in water

A chemiluminescent flow system for bromate detection, based on the reaction of bromate with sulphite in acid medium and using the steroid hydrocortisone as sensitiser, was studied. A factorial analysis strategy for the study of the effect on the system response of the experimental factors, flow rates of two pumps (Q₁ — acid sulphite plus hydrocortisone aqueous solution; Q₂ — carrier, water), sample injection volume (V_L), reactor volume (V_R), sulphite concentration (C_S), hydrocortisone concentration (C_H) and acid concentration (C_A), was used. Screening analysis of the system performance was made using Plackett Burman designs. The system optimisation procedure was achieved by three levels three factors full factorial designs. V_L and C_H are the most significant factors — a quadratic C_H term was also observed to be significant. The optimised system responded linearly (logarithm of the detector signal as function of the logarithm of the bromate concentration) in the concentration range between 3.6×10⁻⁷ and 5.0×10⁻⁴ M with a limit of detection of about 8.0×10⁻⁸ M (about 10 microg/l). An analysis of some interfering ions was made and it was suggested that bromide and chloride begin to quench chemiluminescence when they are in a 10-fold excess relatively to bromate concentration.     

Label-free aptamer-based chemiluminescence detection of adenosine

We have developed a novel sensitive chemiluminescence (CL) aptasensor for the target assay as exemplified by using adenosine as a model target. In this work, we have demonstrated the signaling mechanism to make detection based on magnetic separation and 3,4,5-trimethoxyl-phenylglyoxal (TMPG), a special CL reagent as the signaling molecule, which reacts instantaneously with guanine nucleobases (G) of adenosine-binding aptamer strands. Briefly, amino-functioned capture DNA sequences are immobilized on the surface of carboxyl-modified magnetic beads, and then hybridized with label-free G-rich (including 15 guanine nucleobases) adenosine-binding aptamer strands to form our CL aptasensor. Upon the introduction of adenosine, the aptamer on the surface of magnetic beads is triggered to make structure switching to the formation of the adenosine/aptamer complex. Consequently, G-rich aptamer strands are forced to dissociate from magnetic beads sensing interface, resulting in a decrease of CL signal. The decrement of peak signal is proportional to the amount of adenosine. The effects of the amounts of capture DNA, aptamer, magnetic beads are investigated and optimized. It was found that the CL intensity had a linear dependency on the concentration of adenosine in the range of 4 × 10⁻⁷ to 1 × 10⁻⁵ M. With a low detection limit of 8 × 10⁻⁸ M and simplicity in CL detection, this novel technique will offer a great promise for future target/aptamer analysis.