Modified <Emphasis Type="Italic">Rhizopus arrhizus</Emphasis> biomass for sorption of <Superscript>241</Superscript>Am and other radionuclides

The improvement and the refinement of non-viable Rhizopus arrhizus biomass were investigated via immobilization. Immobilization was carried out by using sodium alginate/CaCl₂ solution and formaldehyde/HCl cross-linking with dead Rhizopus arrhizus biomass and were used for the sorption of radionuclides from low level effluent wastes. The sodium alginate/CaCl₂ immobilized biomass (ratio 1:2) showed about 86% sorption for ²⁴¹Am activity but due to its soft nature and tendency to undergo distortion in shape, is unsuitable for practical applications. The biomass cross-linked with 15% formaldehyde/0.1 M HCl solution has a relatively high mechanical strength and rigidity. It was showing a sorption of >99% for ²⁴¹Am activity and has the sorption capacity of ~65 mg/g for americium and uranium. Hence, it can be utilized for the removal of radionuclides from radioactive waste effluents.     

Albumin metal interaction: A multielemental radiotracer study

Interaction of albumin with no-carrier-added metal radionuclides was studied in multielemental environment using dialysis technique. No-carrier-added ^197mHg, ^199–201Tl, ^199–200Pb, ²⁰⁴Bi and ^204,205Po were produced by irradiating Au target consecutively with ⁷Li and ¹²C beams. Similarly, ⁶¹Cu, ^66–68Ga, ^62,63Zn, ^66,67,69Ge, ^71,72As and ⁷³Se were produced by irradiating cobalt target consecutively with ¹⁶O, ⁷Li and ¹²C projectiles. These no-carrier-added radionuclides were chemically separated from the bulk target before studying their interaction with albumin. It was found that Hg and Ga strongly bind with albumin, whereas Bi, Po, As, and Se do not bind at all with albumin. The binding affinities of Pb, Tl, Cu and Zn radionuclides towards albumin are moderate.     

Dynamic Release of Propranolol HCl from Cationic Ion–Exchanger–Loaded Calcium Alginate Beads

The dynamic release of drug propranolol HCl from the propranolol HCl–resin complex (PRC) loaded calcium alginate beads has been studied in the buffer media of pH 1.2 at the physiological temperature 37°C. The PRC encapsulated beads demonstrated nearly 58.04% release while naked PRC particles released 98.00% drug in 24 h in the gastric fluid. The amount of drug released was found to increase with and decrease in the amount of sodium alginate in the beads. Similarly, with the increase in the amount of entrapped PRC particles within the beads, the quantity of drug released was also observed to increase. The degree of crosslinking of beads also affected the release kinetics. Interestingly, the release from naked PRC particles followed ‘first‐order’ kinetics while PRC particles, entrapped in calcium–alginate beads, exhibited ‘diffusion controlled’ release behavior as indicated by liner nature of fractional release vs. √t plot.     

Biosorption of mercury by carboxymethylcellulose and immobilized Phanerochaete chrysosporium

Phanerochaete chrysosporium basidiospores immobilized onto carboxymethylcellulose were used for the removal of mercury ions from aqueous solutions. The biosorption of Hg(II) ions onto carboxymethylcellulose and both immobilized live and heat-inactivated fungal mycelia of Phanerochaete chrysosporium was studied using aqueous solutions in the concentration range 30-700 mg l⁻¹. The biosorption of Hg(II) ions by the carboxymethylcellulose and both live and heat-inactivated immobilized preparations increased as the initial concentration of mercury ions increased in the medium. Maximum biosorption capacity for immobilized live and heat-inactivated fungal mycelia of Phanerochaete chrysosporium was found to be 83.10 and 102.15 mg Hg(II) g⁻¹, respectively, whereas the amount of Hg(II) ions adsorbed onto the plain carboxymethylcellulose beads was 39.42 mg g⁻¹. Biosorption equilibria were established in approximately 1 h and the correlation regression coefficients show that the adsorption process can be well defined by a Langmuir equation. Temperature changes between 15 and 45 °C did not affect the biosorption capacity. The effect of pH was also investigated and the maximum adsorption of Hg(II) ions onto the carboxymethylcellulose and both live and heat-inactivated immobilized fungal mycelia was observed at pH 6.0. The carboxymethylcellulose-fungus beads could be regenerated using 10 mM HCl, with up to 95% recovery. The biosorbents were used in three biosorption-desorption cycles and no significant loss in the biosorption capacity was observed.     

Reduction of uranium concentration in well water by Chlorella (Chlorella pyrendoidosa) a fresh water algae immobilized in calcium alginate

A great deal of research has been directed towards the problem of reduction of uranium concentration from few hundreds of ppb to less than 20 ppb, a limit of uranium in drinking water from ground water resources fixed in Dec, 2001 by US, Environmental Protection Agency. Laboratory simulated experiments were carried out for the reduction of U(VI) concentration in well water from few thousands of ppb to less than 20 ppb. Well water samples were spiked with U(IV) ranging from 1000 to 2000 ppb. The contaminated solutions were passed through a glass column containing of chlorella impregnated beads of calcium alginate. Chlorella(Chlorella pyrendoidosa), a fresh water algae, was immobilized in sodium alginate in the form of beads by using 0.2M calcium chloride solution. The solution was passed again through a charcoal solution to remove any trace of impurities. The concentration of uranium after treatment ranged from 10 to 20 ppb. The concentration of other major cations and anions in the solution were also monitored. This low cost kit was proposed for on-line removal of uranium from ground water used for drinking purposes. For taking care of waste disposal, 99-100% of the adsorbed uranium on beads was recovered by 0.1M HNO₃. The desorption results suggest that the uptake of uranium by Chlorella is a physico-chemical adsorption on the cell surface, not a biological activity. The uranium in the algal cells is coupled to the ligand, which can be easily substituted with NO₃ ^-. This revised version was published online in July 2006 with corrections to the Cover Date.     

Adsorption of Hg(II) Ions onto Binary Biopolymeric Beads of Carboxymethyl Cellulose and Alginate

The removal of Hg(II) ions from aqueous solution by adsorption onto cross-linked polymeric beads of carboxymethyl cellulose (CMC) and sodium alginate was studied at fixed pH (6) and room temperature 28 ± 0.2°C. The cross-linked polymeric beads were characterized by FTIR spectra. Sorption capacity of the polymer for the mercury ions was investigated in aqueous media consisting different amounts of mercury ions (2.5 to 100 mg dm^?3) and at different pH values (2 to 8). Adsorption behavior of Hg(II) ions could be modeled using both the Langmuir and Freundlich isotherms. The dynamic nature of adsorption was quantified in terms of several kinetic constants such as rate constants for adsorption (k₁) and Lagergreen rate constant (K_ad). The influence of various experimental parameters such as effect of pH, contact time, solid-to-liquid ratio, salt effect, and temperature effect etc. were investigated on the adsorption of Hg(II) ions.     

Formulation characterization and in vitro evaluation of acacia gum–calcium alginate beads for oral drug delivery systems

In the present work, new matrix bead formulations based on linear and branched polysaccharides have been developed using an ionic gelation technique, and their potential use as oral drug carriers has been evaluated. Using calcium chloride as a cross‐linking agent and sodium diclofenac (SD), as a model drug, acacia gum–calcium alginate matrix beads were formulated. The response surface methodology based on 3² factorial design was used as a statistical method to evaluate and optimize the effects of the biopolymers‐blend ratio and the concentration of calcium chloride on the particle size (mm), density (g/cm³), drug encapsulation efficiency (%), and the cumulative drug release after 8 hours (R_8h,%). The optimized beads with the highest drug encapsulation efficiency were examined for a drug‐excipients compatibility by powder X‐ray diffraction, differential scanning calorimetry, thermo‐gravimetric analysis, and Fourier transform‐infrared spectroscopy analyses. The swelling and degradation of the matrix beads were found to be influenced by the pH of medium. Higher degrees of swelling were observed in intestinal pH than in stomach pH. Accordingly, the drug release study showed that the amount of SD released from the acacia gum–calcium alginate beads was higher in intestinal pH than in stomach pH. Therefore, the in vitro drug release from the SD‐loaded beads appears to follow the controlled‐release (Hixson‐Crowell) pattern involving a case‐2 transport mechanism operated by swelling and relaxation of the polymeric blend matrix.     

Separation of 134Cs and 133Ba radionuclides by calcium alginate beads

The uptake behavior of long-lived radionuclides such as ¹³⁴Cs (2.06 years), ¹³⁷Cs (30 years) or ¹³³Ba (10.54 years) on calcium alginate (CA) beads have been investigated. The CA beads are able to remove ¹³³Ba (92%) at pH 7 after 90 min of exposure from the binary mixture of two. The separation method of short-lived daughter ¹³⁷Ba (2.55 min) from its long-lived parent ¹³⁷Cs (30 years) using this CA beads have also been developed.     

Application of tracer packet technique to the study of the bio-sorption of heavy and toxic metal radionuclides by algae

The bio-sorption of heavy and toxic radionuclides by three genera of algae from different taxonomic groups was studied employing the recently developed 'Tracer Packet' technique. The tracer packet of heavy and toxic metals' contained ¹⁹⁷Hg, ^{198,199,200,201}Tl, ^199,200,201Pb, ²⁰⁴Bi and ^204,205Po radionuclides in carrier-free state and was produced by irradiating a gold metal foil with medium energy ⁷Li and ¹²C beams successively in a 12 MV Pelletron. Three genera, Spirulina from Cyanophyceae, Oedogonium from Chlorophyceae and Catenella from Rhodophyceae were cultured in laboratory condition and were used in the experiment. The radionuclide accumulation varied according to different genera at different pH levels. At basic pH Spirulina showed a maximum radionuclide accumulation in comparison to other genera.     

Modified Calcium Alginate Beads with Sodium Dodecyl Sulfate and Clay as Adsorbent for Removal of Methylene Blue

In present study, we have investigated the effect of an anionic surfactant sodium dodecyl sulfate (SDS) and clay on calcium alginate beads was studied to remove methylene blue (MB) and to improve the adsorption capacity. The effects of various experimental parameters, such as shaking rate, initial dye concentration, temperature, and pH on the adsorption rate, have been studied. Equilibrium studies showed that the sorption of the dye was enhanced in presence of SDS. Scanning electron microscope (SEM) analysis showed that SDS entrapped beads have more pores and cavities which could be responsible for improved adsorption of MB. The kinetics of cationic dye adsorption nicely followed pseudo-second-order process. The evaluated thermodynamic parameters (ΔG ^o, ΔH ^o, ΔS ^o) suggest endothermic adsorption of MB. The results revealed that the surfactant entrapped alginate could be considered as potential adsorbents for MB removal from aqueous solutions.     

Preparation of poly(hydroxyethyl methacrylate-co-methacrylamidohistidine) beads and its design as a affinity adsorbent for Cu(II) removal from aqueous solutions

Different metal-complexing ligands carrying synthetic adsorbents have been reported in the literature for heavy metal removal. We have developed a novel and new approach to obtain high metal adsorption capacity utilizing 2-methacrylamidohistidine (MAH) as a metal-complexing ligand. MAH was synthesized by using methacrylochloride and histidine. Spherical beads with an average size of 150–200 μm were obtained by the radical suspension polymerization of MAH and 2-hydroxyethylmethacrylate (HEMA) conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, p(HEMA-co-MAH) beads had a specific surface area of 17.6 m² g⁻¹. Synthesized MAH monomer was characterized by NMR. p(HEMA-co-MAH) beads were characterized by swelling studies, FTIR and elemental analysis. These p(HEMA-co-MAH) affinity beads with a swelling ratio of 65%, and containing 1.6 mmol MAH g⁻¹ were used in the adsorption/desorption of copper(II) ions from metal solutions. Adsorption equilibria was achieved in ∼2 h. The maximum adsorption of Cu(II) ions onto pHEMA was ∼0.36 mg Cu(II) g⁻¹. The MAH incorporation significantly increased the Cu(II) adsorption capacity by chelate formation of Cu(II) ions with MAH molecules (122.7 mg Cu(II) g⁻¹), which was observed at pH 7.0. pH significantly affected the adsorption capacity of MAH incorporated beads. The observed adsorption order under non-competitive conditions was Cu(II)>Cr(III)>Hg(II)>Pb(II)>Cd(II) in molar basis. The chelating beads can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. These features make p(HEMA-co-MAH) beads very good candidate for Cu(II) removal at high adsorption capacity.     

A chelating polymer resin: synthesis,characterization, adsorption and desorption performance for removal of Hg(II) from aqueous solution

A chloromethylated polystyrene-N-methyl thiourea chelating resin (DMTUR) was successfully prepared by the reaction of chloromethylated polystyrene beads (PS-Cl) with N-methyl thiourea (DMTU). The DMTUR exhibited a high selective adsorption toward Hg(II) in the mixture of different metal ions containing Cu(II), Hg(II), Cd(II), Pb(II), Cr(III) and Ni(II), and the adsorption capacity of Hg(II) approached a maximum with a value of 347 mg/g at pH = 4.0. Moreover, the batch kinetic study showed that the adsorption behavior of Hg(II) presented as a pseudo-second-order manner. And the adsorption isotherms fitted well with Langmuir model, and the maximum uptake of Hg(II) could reach to be 476 mg g^?1 at 35 °C. The thermodynamics study ensured the adsorption process essentially as favorable and endothermic. Finally, an eluent of 4 M HNO₃ solution could completely remove the adsorbed Hg(II) and the adsorption capacity allowed a high level at least five cycles. As aforementioned appealing properties, the DMTUR with simple technology, high adsorption capacity, significant selectivity and good regenerability may have a potential application in industrial scale as a treatment of enriched Hg(II) in wastewater.     

Extended release of Gliclazide from highly stabilized calcium alginate/poly(acrylamide) beads for diabetes management

In the present work, stability of calcium alginate beads has been remarkably improved by a novel strategy which consists of in situ formation of poly (acrylamide) within the calcium ions cross-linked sodium alginate beads. The resulting beads have been found to be stable for more than 48 h, in the physiological fluid (PF) of pH 7.4, while the plain alginate beads disintegrated within a couple of hours. The release of the anti-diabetic drug Gliclazide (Glz) from the beads was investigated under physiological conditions. The enhanced stability and prolonged release was also confirmed by an in vivo study on Albino Wistar rats.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Bestimmung des Cadmiums (Pb, Tl, Cu) neben Indium in tensidhaltigen Grundl?sungen von Polyaminocarbons?uren mit Hilfe der differentiellen Pulse-Polarographie

Zusammenfassung Die differentielle pulse-polarographische Bestimmung des Cd (Pb, Tl, Cu) neben hohen Gehalten an Indium ist in Grundlösungen von Polyaminocarbonsäuren in Anwesenheit von Tensiden möglich. In einer Lösung von 0,1 M HCl, 0,003 M EDTA und 0,005% Phemerol können 1 · 10^–7 M Cd neben 5 · 10^–3 M In bestimmt werden.

---

Determination of Cadmium (Pb, Tl, Cu) in the presence of indium in supporting solutions of polyaminocarboxylic acids containing surfactants by differential-pulse polarography

Summary The differential pulse polarographic determination of Cd (Pb, Tl, Cu) in the presence of a high excess of indium is possible in supporting solutions of polyaminocarboxylic acids after addition of surfactants. In a solution of 0.1 M HCl, 0.003 M EDTA and 0.005% phemerol, 2×10^–7 M Cd can be determined in the presence of 10^–3 M In.

Der Deutschen Forschungsgemeinschaft und dem Verband der Chemischen Industrie danken wir für die Bereitstellung von Sachmitteln.     

Preparation and property of layer-by-layer alginate hydrogel beads based on multi-phase emulsion technique

Layer-by-layer (LbL) alginate beads, which were prepared by multi-phase emulsion technique, had been fabricated via the ionic crosslinking between calcium ion (Ca²⁺) and the carboxylic group of alginate. The prepared beads were spherical, smooth-surfaced and non-aggregated. The SEM analysis displayed the LbL structure of the beads clearly. It had been demonstrated that the size of the beads was controllable and had a correlation with concentration of sodium alginate (SA) and CaCl₂, ratio of water phase and oil phase (W/O), stirring speed, pH value of the water phase, viscosity of SA as well as the temperature for solidification. Stability studies showed that the beads degraded slowly in simulated gastric fluid and simulated intestinal fluid but degraded sharply when they were moved to simulated colonic fluid. Cytotoxicity study by MTT assay indicated that the prepared beads are slightly toxic. It is hoped that this kind of novel beads could be used in pharmaceutical area and cell culture area.     

Removal of some nitrophenol contaminants using alginate gel beads

Biopolymers such as alginates are commonly used to remove the cationic contaminants from wastewaters. The major component of the alginate is the alginic acid, a linear, binary heteropolymer of β-d-mannuronate and -l-guluronate residues. In this study the fundamental aspects in the preparation of alginate beads and the effects of salt, sodium alginate concentrations and two cationic surfactants (dodecyltrimethylammonium bromide, cetyltrimethylammonium bromide) on the domains of binding isotherms were investigated. The alginate cross-link complexes with metal ions can exist either as homogeneous clear solutions or precipitates or as spherical beads. The applicability of the calcium and calcium–iron alginate gel beads for removal of some nitrophenols from aqueous solutions was studied. The sorption and kinetic experiments were conducted under different values of pH, initial concentration of nitrophenols and the amount of alginate gel beads. The removal efficiency of contaminant increases with the increasing of the pH and the quantity of alginate beads and decreases with the increasing of initial contaminant concentration. The uptake of nitrophenols occurs rapidly in the first 12 h, followed by a slow process that takes about 72 h. According to the egg-box model of gelation mechanism the cavities formed in the alginate gel capture the cationic contaminants. The adsorption equilibrium data obtained for nitrophenols derivatives at various pH and initial solid sorbent amount were applied to the two classical models, i.e. Langmuir and Freundlich, and the isotherm parameters were calculated.     

A simple method for the activation analysis of mercury in fish by using iodinated resins

After irradiation and decay periods, samples are dissolved in 20 min in a sulfuric-nitric acid mixture containing a metavanadate salt. The aqueous phase is neutralized and passed through an iodinated resin which selectively isolates mercury from all other interfering radionuclides. The activity of¹⁹⁷Hg is determined by γ-spectrometry using a thin Na(Tl) detector. A sensitivity limit of 2.5 ppb^* is obtained and the relative standard deviation of the method is 6.7% at a level of 85 ppb.     

Effects of pH, concentration and temperature on radionuclides sorption onto polyhydroxyethyl methacrylate-expanded perlite composite

Poly (hydroxyethylmethacrylate-expanded perlite) [P(HEMA-EP)], was synthesized and its adsorptive features were investigated for natural radionuclides (TI⁺, Ra²⁺, Bi³⁺, Ac³⁺ and Pb²⁺) in aqueous media at differing initial pH, initial radionuclides concentration and adsorption thermodynamics. The amounts of natural radionuclides at equilibrium were determined by gamma spectrometry. The Langmuir adsorption capacities (X_L) were found to be in the order of ²¹²Pb (0.4 MBq kg^?1) > ²²⁸Ac and ²⁰⁸Tl (0.3 MBq kg^?1) > ²²⁶Ra and ²¹²Bi (0.2 MBq kg^?1). These findings indicated that P(HEMA-EP) adsorbed natural radionuclides with high affinity. It was also demonstrated that the adsorption mechanism was spontaneous (ΔG < 0), the process was exothermic (ΔH < 0) thus increasing entropy (ΔS > 0). The composite was reused for four more times after regeneration without any detectable changes either in its structure or adsorptive capability.     

Radiation grafting of ionically crosslinked alginate/chitosan beads with acrylic acid for lead sorption

Radiation-induced grafting of acrylic acid onto alginate/chitosan beads was performed in solution at a dose rate of 20.6 Gy/min of Co-60 gamma rays. The effect of absorbed dose on grafting yield was investigated. The characterization of the grafted and un-grafted beads was performed by FTIR spectroscopy and the swelling measurements at different pHs was studied. It is found that as the pH value increases the swelling degree increases up to pH 6 but with further increase in pH value the swelling decreases. Also, it is noticed that the grafting yield increased with increase the irradiation dose. Both un-grafted and grafted alginate/chitosan beads were examined as sorbents for the removal of Pb ions from aqueous solutions. The sorption behavior of the sorbents was examined through pH, and equilibrium measurements. Grafted alginate/chitosan beads presented higher sorption capacity for Pb ions than un-grafted beads.