Chemical durability and weathering resistance of canasite based glass and glass-ceramics

Classic composition 8.4Na₂O·5K₂O·10.8CaO·64SiO₂·10.5CaF₂·1.3Al₂O₃ (G1/GC1) and high silicon composition 7.6Na₂O·4K₂O·8.4CaO·71SiO₂·8CaF₂·1.0Al₂O₃ (G2/GC2) canasite-based glass and glass-ceramics were prepared, and the chemical durability and weathering of samples were studied with XRD, ICP-AES, SEM and optical microscopy. Interestingly, a kind of color fringe pattern caused by the acid leaching was directly observed on the glass ceramic surface under optical microscopy. The 20 day weight losses of glass and glass ceramic in acid (1 M HCl) and alkali (1 M NaOH/1 M Na₂CO₃) solution were measured. Accelerated weathering was used to demonstrate that increasing silicon content contributes to the weathering performance of glass and glass-ceramics. For different micro-structures and compositions, the weight loss of each glass and glass-ceramic is quite different. In general, through increasing the network interconnectivity of residual glass network and suppressing the crystallization of the less durable canasite phase, the addition of SiO₂ (from 60 mol% to 71 mol%) enhanced the chemical durability of canasite-based glass and glass ceramic relatively under acid, alkali and weathering conditions.     

Crystallization and spectroscopic properties of Eu-doped CaF2 nanocrystals in transparent oxyfluoride glass-ceramics

Transparent oxyfluoride glass-ceramic in the system SiO₂–Al₂O₃–CaF₂–EuF₂ containing Eu-doped CaF₂ nanocrystals were produced by using the controlled crystallization of melt-quenched glass. X-ray diffraction and transmission electron microscopy data have revealed the formation of the CaF₂ nanocrystals of about 65 nm size. Photoluminescence spectra have shown an increase of the splitting of the luminescences associated to the Eu³⁺ ion along with annealing time which is consistent with the Eu³⁺ environment evolving from a glassy to a crystalline state.     

Bond character and properties of the mixed alkali system Na2OK2OAl2O3SiO2

The mixed alkali glass system Na₂OK₂OAl₂O₃SiO₂ was investigated. Density, transformation temperature, refractive index, and chemical durability were studied. Optical absorption and ESR spectra of the CuO-doped glasses were determined.Calculations of the polarizability of O^2?, bonding parameters of the Cu²⁺ complex, and the packing density are presented. It was found that for the mixed alkali glasses, the oxygen- alkali bond has a more ionic character than expected from additivity. This fact enables the non-linear changes of the refractive index, of the shift of the Cu²⁺ absorption band, and of the covalency to be interpreted as the Na mole fraction is varied. It is also possible to explain qualitatively the density, T_g and chemical durability non-linear variations with change of the Na content by the ionicity deviations of the bond character and the postulated pairs of Na⁺ and K⁺ ions in the mixed alkali glasses.     

Influence of alkali and alkali-earth metal oxide substitutions on the properties of lithium-iron-phosphate glasses

The influences of different alkali and alkali-earth oxide substitutions on the properties of lithium-iron-phosphate (LIP) glasses have been studied. Na₂O, K₂O, MgO, CaO and BaO were used to substitute Li₂O to prepare LIP glasses with molar compositions of (20 − x)Li₂O − xR₂O(RO) − 30Fe₂O₃ − 50P₂O₅ (x = 2.4, 4, 5.6 and 7.2). The glass transition temperature (T_g) was determined by the differential thermal analysis technique. The density and chemical durability of the prepared glasses were measured based on the Archimedes principle and the weight losses after the glasses were boiled in water. The results show that T_g decreases with the initial substitutions, whereas the density and chemical durability increase. The diminution of the aggregation effect of Li⁺ ions on the glass structure due to the decrease in Li⁺ concentration, the larger molecule weights of the substitutes, the mixed-alkali and depressing effects as well the slower mobility of substitute ions mainly contribute to the initial changes in T_g, density and chemical durability of the LIP glasses, respectively. Further increasing the amounts of substitutes brings about increasing diminution of the aggregation effect of Li⁺ ions and breakage of the glass network on the one hand and increasing amounts of substitutes with larger molecule weights and ion radii on the other hand. Both aspects influence the glass properties oppositely and consequently non-monotonic variations in the properties of LIP glasses with the substitutions are observed.     

Eu2+/Dy3+ co-doped white light emission glass ceramics under UV light excitation

In the present work, transparent Eu²⁺/Dy³⁺ co-doped white light-emitting glass ceramics containing CaF₂ were successfully prepared under reducing atmosphere. Their luminescence properties have been studied by excitation and emission spectra. A combination of blue, yellow and red emissions has emerged in Eu²⁺/Dy³⁺ co-doped glass and glass ceramics, which allows the observation of bright white light when the samples are excited by the ultraviolet light. Energy transfer (ET) from Eu²⁺ to Dy³⁺ is discovered by directly observing the luminescence intensity of Dy³⁺ in the Eu²⁺/Dy³⁺ co-doped glass which is much stronger than that in the Dy³⁺-doped glass. ET from Eu²⁺ to Dy³⁺ in glass is further confirmed by fluorescence studies performed on the samples with various activator (Dy³⁺) concentrations. The color of luminescence could be adjusted by varying the proportions of europium and dysprosium. The optimal composition generates white light with chromaticity coordinates (0.296, 0.311). The results indicate that Eu²⁺/Dy³⁺ co-doped glass ceramics containing CaF₂ nano-crystals is a potential material for white LED.     

Evaluation of glass ionomer cements properties obtained from niobium silicate glasses prepared by chemical process

Glass ionomer cements (GICs) are glass and polymer composite materials. These materials currently find use in the dental field. The purpose of this work is to obtain systems based on composition 4.5SiO₂–3Al₂O₃–XNb₂O₅–2CaO to be used in Dentistry. The systems were prepared by chemical route at 700 °C. The results obtained by XRD and DTA showed that all systems prepared are glasses. The structures of the obtained glasses were compared to commercial material using ²⁷Al and ²⁹Si MAS NMR. The analysis of MAS NMR spectra indicated that the systems developed and commercial material are formed by SiO₄ and AlO₄ linked tetrahedra. The properties of glass ionomer cements based on the glasses prepared with several niobium contents were studied. Setting and working times of the cement pastes, microhardness and diametral tensile strength were evaluated for the experimental GICs and commercial luting cements. It was concluded that setting time of the cement pastes increased with increasing niobium content of the glasses (X). The properties to the GICs such as setting time and microhardness were influenced by niobium content.     

Lithium aluminosilicate glass-ceramic containing Na2O for low-temperature anodic bonding in microelectronic mechanical systems

In this study, one kind of lithium aluminosilicate-β-quartz glass-ceramic containing Na₂O has been chosen, which can be used for low-temperature bonding with a higher bonding rate for the manufacture of microelectronic mechanical systems. The microstructure of the glass-ceramic is analyzed by transmission electron microscopy, high resolution transmission electron microscopy, selected-area diffraction, energy dispersive spectrometry and X-ray diffraction. The influence of the heat treatment process of the glass on the properties and the microstructure of the glass-ceramics is discussed. The microstructure of the glass-ceramic has the continuous glassy region with higher alkali metal ion content, which benefits the low-temperature anodic bonding.     

Solubility of CaO in CaF2 crystals

By means of conductivity investigations the solubility of CaO in CaF₂ crystals was estimated to be C_L(CaO) ≈︁ 3.7 exp (-0.68 eV/kT) = 3.7 exp (-7900 K/T) and the diffusion constant of O⁻ ions in CaF₂ D(O⁻) ≈︁ 3 exp (-2.2 eV/kT) cm²/s = 3 exp (-25 500 K/T) cm²/s.     

Adhesion of ethylene-tetrafluoroethylene copolymer with silicate glasses

The adhesive strength of ethylene-tetrafluoroethylene copolymer (ETFE) was measured on silicate glass substrates. A value of over 300 kg/cm² obtained with a commercial soda-lime-silica glass and this initial adhesiveness was attributed to the marked wettability of molten ETFE and its chemical structure. Since the decrease in the adhesive strength was small after immersion in water for a dealkalized soda-lime-silica glass, Pyrex, and a soda-lime-silica glass coated witn In₂O₃, it was inferred that the sodium ions in the soda-lime-silica glass played a fundamental role in lowering the adhesive strength in the presence of water. Pretreatment with N-(β-aminoethyl)-γ-aminopropyl-trimethoxy silane markedly improved the water durability of the adhesive strength.     

Luminescence behavior of Er ions in glass-ceramics containing CaF2 nanocrystals

The upconversion luminescence and near infrared luminescence of the Er³⁺ ions in transparent oxyfluoride glass-ceramics containing CaF₂ nanocrystals have been investigated. The formation of CaF₂ nanocrystals in the glass-ceramics was confirmed by XRD. The oscillator strengths for several transitions of the Er³⁺ ions in the glass and glass-ceramics have been obtained and then the Judd-Ofelt parameters were calculated. The split near infrared emission peaks of the Er³⁺ ions in the glass-ceramics can be observed because the Er³⁺ ions have been incorporated into crystalline environment of the CaF₂ nanocrystals. The upconversion luminescence intensity of Er³⁺ ions in the glass-ceramics increased significantly with increasing heat treated time. The transition mechanism of the upconversion luminescence has been ascribed to a two-photon absorption process.     

Mössbauer study in the glass system PbO · 2B2O3 · Fe2O3

The Mössbauer technique has been employed to study the structure and crystallite formation in the glass system PbO · 2B₂O₃ containing upto 30 wt% Fe₂O₃. Like alkali borate glasses, this glass system also exhibits a broadened quadrupole doublet and iron ions are present in Fe³⁺ state. Above about 20 wt%, the crystallites of magnetically ordered states have been identified. Susceptibility variation with concentration suggests the formation of a superparamagnetic state.     

Mössbauer effect studies of alkali borate glasses

Mössbauer studies of a large number of glass samples prepared with alkali oxides in the region of glass formation are reported. Some representative samples are studied in the temperature range 85–500 K. The following glass systems are studied.

Room-temperature isomer shift values decrease gradually with the addition of alkali oxide and the values fall sharply for alkali content higher than 22 mol%. We conclude that iron is in the ferric state and that the oxygen polyhedra of iron changes from octahedral to tetrahedral. The structural change results from the fact that the alkali introduces an extra non-bridging oxygen ion. The size of the alkali cation introduced into the glass has considerable influence on the isomer shift values of iron. In fact, the polarizing power decreases in the order LiNaK, hence the s-character of the FeO bond increases in the order LiNaK. Addition of Al₂O₃ has no effect on the isomer shift values of iron, showing that aluminium ions occupy network-forming positions.For some representative samples the second-order Doppler effect was studied as a function of temperature in the range 85–500 K. The thermal red shifts due to second-order Doppler effect are used to estimate the local specific heats of ferric ion in the glass system. The quadrupole splitting has weak temperature dependence, showing that Fe³⁺ is in a high-spin state.     

The influence of strontium substitution in fluorapatite glasses and glass-ceramics

Strontium is often substituted for calcium in order to confer radio-opacity in glasses used for dental cements, biocomposites and bioglass-ceramics. The present paper investigates the influence of substituting strontium for calcium in a glass of the following composition: 4.5SiO₂3Al₂O₃1.5P₂O₅3CaO2CaF₂, having a Ca:P ratio of 1.67 corresponding to calcium fluorapatite (Ca₅(PO₄)₃F). The glasses were characterized by magic angle spinning nuclear magnetic resonance (MAS-NMR), by differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD). The ²⁹Si, ²⁷Al and ³¹P NMR spectra for the glasses with different strontium contents were identical. The ¹⁹F spectra indicated the presence of F-Ca(n) and Al-F-Ca(n) species in the calcium glasses and in the strontium glasses F-Sr(n) and Al-F-Sr(n). It can be concluded that strontium substitutes for calcium with little change in the glass structure as a result of their similar charge to size ratio. The low strontium glasses bulk nucleated to a calcium apatite phase. Intermediate strontium content glasses surface nucleated to a mixed calcium-strontium apatite and the fully strontium substituted glass to strontium fluorapatite.     

An interpretation of glass chemistry in terms of the optical basicity concept

The basicity of an oxide glass can be measured experimentally from the frequency shifts in the ultra-violet (UV) (s-p) spectra of probe ions such as Pb²⁺ and can be expressed on the numerical scale of optical basicity Λ (ideally Λ lies between zero and unity). It is possible to relate Λ with (i) the constitution, and (ii) the electronegativity of the cations (e.g. Na⁺, Si⁴⁺, etc.) of the glass, and the relationship allows microscopic optical basicities λ to be assigned to individual oxides and oxy-groups in the glass. These microscopic optical basicities are used for interpreting various aspects of the physics and chemistry of glass including refractivity, network coordination number changes, chemical durability, the glass electrode, UV transparency and the host behaviour of glass towards metal ions generally. Changes in glass basicity in going from one alkali metal oxide to another are also discussed. Finally, the concept of optical basicity, both as an experimentally obtained quantity and as a number calculated from glass constitution and electronegativity, is discussed in relation to the traditional approach to acid-base behaviour in glass.     

Characterization and chemical durability of 70Ph2SiO·30TiO2 coating prepared by the sol-gel process

70Ph₂SiO·30TiO₂ coatings on slide glass and phosphate glass substrates have been prepared by the sol-gel process. Experimental results on the characterization and chemical durability of the coatings are presented. It is shown that the coatings heated at 150°C have reasonably good acid and water resistance while their alkali durability is very poor. The XPS results are used to verify the different corrosion behaviors of the coating in pure water and 1N HC1 solutions. The chemical durability of phosphate glass can be significantly improved by this coating.     

Effect of neodymium oxide on the solubility of MoO3 in an aluminoborosilicate glass

High molybdenum and rare earth concentrations in soda-lime aluminoborosilicate glasses may lead to the crystallization of molybdenum-rich phases such as alkali and alkaline-earth molybdates (Na₂MoO₄, CaMoO₄) and also rare earth (RE)-rich phases such as apatite (Ca₂RE₈(SiO₄)₆O₂) during melt cooling that must be controlled particularly during the preparation of highly radioactive nuclear glassy wasteforms. To understand the effect of neodymium addition (from 0 to 16 wt.% Nd₂O₃) on the phase separation and the crystallization tendency of molydbate phases and on the structure of a Mo-bearing nuclear glass belonging to the SiO₂-B₂O₃-Al₂O₃-Na₂O-CaO-MoO₃ system, crystallization and structural studies have been performed by X-ray diffraction, scanning electron microscopy, electron microprobe analysis, Raman and optical absorption spectroscopies. The results obtained show that the addition of an increasing amount of Nd₂O₃ induces a significant increase of the solubility of molybdenum in the glass, characterized by a decrease of the phase separation and of the crystallization tendency of molybdate phases. The increase of chemical disorder in the structure of Mo-bearing glasses when Nd₂O₃ is added - and more precisely in the depolymerized regions where Nd³⁺ cations and [MoO₄]²⁻ entities are located - could be at the origin of the evolution of the molybdenum solubility in the glass.     

A low silica, barium borate glass-ceramic for use as seals in planar SOFCs

A low silica, barium borate glass-ceramic for use as seals in planar SOFCs containing 64 mol%BaO, 3 mol%Al₂O₃ and 3 mol%SiO₂ was studied. Coefficient of thermal expansion (CTE) between 275-550 °C, glass transition temperature (T_g), and dilatometric softening point (T_s) of the parent glass were 11.9 × 10⁻⁶ °C⁻¹, 552 °C, and 558 °C, respectively. Glass-ceramic was produced by devitrification heat treatment at 800 °C for 100 h. It was found that nucleation heat treatment, seeding by 3 wt%ZrO₂ as glass-composite and pulverization affected the amount, size and distribution of crystalline phases. SEM-EDS and XRD results revealed that crystalline phases presented in the devitrified glass-ceramic were barium aluminate (BaAl₂O₄), barium aluminosilicate (BaAl₂Si₂O₈) possibly with boron associated in its crystal structure, and barium zirconate (BaZrO₃). CTE of the devitrified glass-ceramic was in the range of (10.1-13.0) × 10⁻⁶ °C⁻¹. Good adhesion was obtained both in the cases of glass and devitrified glass-ceramic with YSZ and AISI430 stainless steel. Interfacial phenomena between these components were discussed.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.     

Solubility of tin dioxide in soda-lime silicate melts

In the present work, the solubility of tin dioxide is assessed as a function of time, temperature and basicity in simple ternary glasses: NC3S, NC4S, NC5S and NC6S (N: Na₂O, C: CaO, S: SiO₂). An increase of silica contents in the glass composition leads indeed to a decrease of the glass basicity. First, a kinetic study of the dissolution has been performed. Consequently, the solubility limits of tin dioxide have been determined after 2 h of heat treatment: this duration is long enough to reach the dissolution equilibrium, and short enough to limit the sodium oxide losses in the melt at high temperatures. Nevertheless the specific case of the most acid glass has been underlined, as its higher viscosity implies longer heating times. At equilibrium state, SnO₂ solubility depends on the temperature (Arrhenius law) and on the glass basicity. In the 1200 °C–1400 °C temperature range, in these soda–lime glasses, the solubility of tin dioxide is between 1.3 and 2.1 at.% Sn and the temperature dependence of solubility exhibits a single mechanism of dissolution. Furthermore, the basicity dependence of the solubilization process is also discussed, and the presence of another oxidation state of tin (Sn^II) is thus proposed.     

The effects of ionizing radiation on HLW glasses

The production of displacement damage in HLW glasses has been accelerated by a factor of 10⁷ by neutron-irradiation of a typical borosilicate glass which has been doped with up to 10% UO₂ so that (n, α) and (n, f) events are produced. The energetic products of these reactions consitute the primary knock-ons which initiate displacement cascades. A stored energy of ≈ 100 kJ/kg has been measured with differential scanning calorimetry. The effects of positive ion “self”-irradiation on the chemical durability of the glass have been investigated by studying the leaching/dissolution of irradiated and control powder specimens in an aqueous solution. The initial leaching/dissolution rates for Li, Sr and Si are enhanced by a factor of 2–4 by irradiation while the longer term rates are typically increased by 50%. The effects of back-reactions and changing particle size distribution complicate the interpretation of the result. The release of some activation products and fission fragments have been monitored; most species are well retained, but Ru exhibits an anomalously high leaching rate.