Lanthanum trichloride: An efficient catalyst for the silylation of hydroxyl groups by activating hexamethyldisilazane (HMDS)

A variety of hydroxy functional groups was protected as their corresponding trimethylsilyl ethers using HMDS in the presence of lanthanum trichloride. The catalyst LaCl₃ activates the HMDS and accelerates the reaction under mild reaction conditions at room temperature to afford the corresponding silylated products in excellent yields.     

Mild and efficient silylation of alcohols and phenols with HMDS using Bi(OTf)3 under solvent-free condition

A very efficient and mild silylation of alcohols and phenols with hexamethyldisilazane (HMDS) at rt is developed using Bi(OTf)₃ as the catalyst. Primary, secondary and tertiary alcohols as well as phenols are excellently converted into corresponding TMS ethers in a very short reaction time. This procedure can also be applied to large scale silylation for industrial application.     

Electrochemical and catalytic investigation of carbon paste modified with Toluidine Blue O covalently immobilised on silica gel

Toluidine Blue O (TBO) was covalently bound on silica gel and mixed with graphite powder and paraffin oil to produce modified carbon paste electrodes. The formal potential (E°′) of the covalently bound TBO was found to be −100 mV versus Ag|AgCl (KCl sat.) at pH 7.0 and the E°′ varied less than anticipated for a 2-electron-proton type mediator with pH. The bound TBO was found to act as an efficient electron acceptor for NADH as well as electron donor for oxidised horseradish peroxidase (HRP). The kinetics and the mechanism of the reaction between NADH and TBO were investigated with cyclic voltammetry and using a rotating disc electrode. Further experiments were done in the flow injection mode injecting different concentrations of NADH. Similar studies were done in the presence of hydrogen peroxide when HRP was adsorbed onto the TBO modified silica gel carbon paste electrodes.     

Nitric acid in the presence of P2O5 supported on silica gel—a useful reagent for nitration of aromatic compounds under solvent-free conditions

A variety of aromatic compounds are nitrated to parent nitro aromatic compounds under solvent-free conditions using 65% nitric acid in the presence of P₂O₅ supported on silica gel is described. This methodology is useful for nitration of activated and deactivated aromatic rings.     

Silica-supported perchloric acid and potassium bisulfate as reusable green catalysts for nitration of aromatics under solvent-free microwave conditions

Silica-supported perchloric acid and bisulfate (SiO₂/HClO₄ and SiO₂/KHSO₄) have been developed as reusable green catalysts for nitration of aromatic compounds using NaNO₂ in acetonitrile medium under conventional and solvent-free microwave conditions. The reaction times under microwave irradiation are significantly shorter than conventional method even though the yields obtained in microwave-assisted reactions are comparable with those obtained under reflux conditions.     

Efficient synthesis of xanthenedione derivatives using cesium salt of phosphotungstic acid as a heterogeneous and reusable catalyst in water

Cs_2.5H_0.5PW₁₂O₄₀ has been reported to be an efficient catalyst for the synthesis of 1,8-dioxo-octahydroxanthene from aldehydes and 1,3-cyclohexanedione/dimedone in water. This approach is environmentally benign with clean synthetic procedure, short reaction time, easy workup procedure, excellent yield, and regeneration of catalyst, which made this protocol efficient and safe.     

A catalyst-free protocol for direct oxidative esterification of alcohols and aldehydes

A fast, simple, and efficient protocol for the direct conversion of alcohols and aldehydes to methyl ester has been developed using TsNBr₂ without any catalyst. The one pot reaction proceeds in the presence of a base at room temperature in methanol, to produce the corresponding methyl ester in high yield within a short time.     

Silica gel supported InBr3 and InCl3: new catalysts for the facile and rapid oxidation of 2′-hydroxychalcones and flavanones to their corresponding flavones under solvent free conditions

Silica gel supported InBr₃ or InCl₃ (15-20 mol %) were explored as a new solid-support catalysts for the facile and efficient oxidation, under solvent free conditions, of 2′-hydroxychalcones and flavanones to yield the corresponding flavones in >80% yield. The catalysts are easily prepared, stable, and efficient under mild reaction conditions.     

A sensitive and highly stable electrochemical impedance immunosensor based on the formation of silica gel-ionic liquid biocompatible film on the glassy carbon electrode for the determination of aflatoxin B1 in bee pollen

The paper describes a sensitive and highly stable label-free electrochemical impedance immunosensor for the determination of aflatoxin B₁ (AFB₁), which is based on the formation of silica gel-ionic liquid biocompatible film on the glassy carbon electrode. The electrochemical performances of the sensor were investigated by electrochemical impedance spectroscopy using a Fe(CN)₆^3−/4− phosphate buffer solution as base solution for test. As new ionic liquid, 1-amyl-2,3-dimethylimidazolium hexafluorophosphate, offers a very biocompatible microenvironment for AFB₁ antibody, the sensor exhibits good repeatability (RSD = 1.2%), sensitive electrochemical impedance response to AFB₁ in the range of 0.1-10 ng ml⁻¹ and lowers the detection limit of AFB₁ (0.01 ng ml⁻¹)_. The electron-transfer resistance change of the sensor after and before incubation with AFB₁ of 2.0 ng ml⁻¹ can retain 95% over a 180-day storage period at 4 °C. The results present a remarkable improvement of sensitivity (2-fold) and long-term stability (190-fold) when compared to classical silica gel sensor. Moreover, proposed sensor has a high selectivity to AFB₁ alone with no significant response to AFB₂, AFG₁, AFG₂ and AFM₁ as single substrates, it has been successfully applied to the determination of trace AFB₁ in bee pollen samples with a spiked recovery in the range of 96.0-102.5%.     

Effect of surface fluorination and conductive additives on the electrochemical behavior of lithium titanate (Li4/3Ti5/3O4) for lithium ion battery

Effect of surface fluorination and conductive additives on the charge/discharge behavior of lithium titanate (Li_4/3Ti_5/3O₄) has been investigated using F₂ gas and vapor grown carbon fiber (VGCF). Surface fluorination of Li_4/3Ti_5/3O₄ was made using F₂ gas (3 × 10⁴ Pa) at 25-150 °C for 2 min. Charge capacities of Li_4/3Ti_5/3O₄ samples fluorinated at 70 °C and 100 °C were larger than those for original sample at high current densities of 300 and 600 mA/g. Optimum fluorination temperatures of Li_4/3Ti_5/3O₄ were 70 °C and 100 °C. Fibrous VGCF with a large surface area (17.7 m²/g) increased the utilization of available capacity of Li_4/3Ti_5/3O₄ probably because it provided the better electrical contact than acetylene black (AB) between Li_4/3Ti_5/3O₄ particles and nickel current collector.     

Electrochemical properties and synthesis of LiAl0.05Mn1.95O3.95F0.05 by a solution-based gel method for lithium secondary battery

The cathode materials, LiMn₂O₄, LiAl_0.05Mn_1.95O₄ and LiAl_0.05Mn_1.95O_3.95F_0.05 were firstly prepared by a simple solution-based gel method using the mixture of acetate and ethanol as the chelating agent. The synthesized samples were investigated by X-ray diffraction, scanning electronic microscope and differential and thermal analysis. The as-prepared powders were used as positive materials for lithium-ion battery, whose discharge capacity and cycle voltammogram properties were examined. The results revealed that LiAl_0.05Mn_1.95O_3.95F_0.05 synthesized by the solution-based gel method had higher initial capacity than LiAl_0.05Mn_1.95O₄ and better capacity retention rate (92%) than that of LiAl_0.05Mn_1.95O₄ and LiMn₂O₄, which revealed that Al and F dual-doped LiMn₂O₄ could gain better electrochemical properties of LiMn₂O₄ than only the Al-doped LiMn₂O₄.     

Nitric acid in the presence of supported P2O5 on silica gel: an efficient and novel reagent for oxidation of sulfides to the corresponding sulfoxides

This paper describes an efficient and easy method for oxidation of sulfides 1 to their corresponding sulfoxides 2 with nitric acid in the presence of supported P₂O₅ on silica gel under solvent-free conditions in high yields.     

Silica gel supported TaBr5: new catalyst for the facile and rapid cyclization of 2′-aminochalcones to the corresponding 2-aryl-2,3-dihydroquinolin-4(1H)-ones under solvent-free conditions

Silica gel supported TaBr₅ (5-10 mol %) is a new solid-support catalyst that can be used under solvent-free conditions for the facile and efficient isomerization of 2′-aminochalcones to the corresponding 2-aryl-2,3-dihydroquinolin-4(1H)-ones. The catalyst is easily prepared, stable and employed under environmentally friendly conditions.     

Electrocrystallizations of copper on glassy carbon in CuCl2 silica sol and aqueous solutions

Electrocrystallizations of copper from both CuCl₂ silica sol and aqueous solutions were studied by the chronoamperometry technique.It was found that current density contributions of the double-layer charging（iDL） in current-time transients（CTTs） from both of the solutions were large.An adsorption-nucleation based model was proposed to analyze quantitatively the CTTs,by which copper electrocrystallization mechanism was characterized as progressive nucleation with 3D growth（3DP） under diffusion control.The diffusion coefficient of copper ions and the AN_∞products in aqueous solutions were larger than that in silica sols, which indicated that copper nucleation was inhibited in sol solution.The large iDL may be resulted from the adsorption of chloride ions on the electrode surface.     

A highly efficient and ecofriendly procedure for tetrahydropyranylation of alcohols and phenols in the presence of in-situ generated I2 under heterogeneous and neutral conditions

Abstract  Molecular iodine generated in situ from Fe(NO₃)₃·9H₂O/NaI acts as a highly efficient catalyst for tetrahydropyranylation of various alcohols and phenols with 3,4-dihydro-2H-pyran in almost quantitative yields. The reaction occurs rapidly in dichloromethane at room temperature, and use of toxic molecular iodine is avoided. Graphical Abstract        

Ultrasound-promoted green approach for the synthesis of multisubstituted pyridines using stable and reusable SBA-15@ADMPT/H5PW10V2O40 nanocatalyst at room temperature

ABSTRACT

A facile one-pot protocol for the synthesis of 2-amino-3-cyanopyridins using SBA-15@Triazine/H₅PW₁₀V₂O₄₀ as an efficient catalyst under ultrasonic conditions has been developed. The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol- 1-yl)-1,3,5-triazine (ADMPT) linker. Then the nanohybrid was used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 2-amino-3-cyanopyridin derivatives from the reaction of aldehydes, malononitrile, cyclic ketones and ammonium acetate under ultrasound waves with good to excellent yields (79–95%) and in a short span of time. This nanocatalyst was characterized by using FT-IR, XRD, SEM, TEM, BET, and EDX techniques.     

Efficient and green synthesis of 4H-pyran derivatives under ultrasound irradiation in the presence of K2CO3 supported on acidic montmorillonite

Acid-treated montmorillonite coating with K₂CO₃ is used as a catalyst for an efficient, rapid, one-pot synthesis of 4H-pyran derivatives in good yield under ultrasonic irradiation. The catalyst is environmentally benign, easy handling, nontoxic, stable in air, and inexpensive.     

An efficient and green protocol for synthesis of novel [1,3]oxazino[5,6-c]quinolin-5-one derivatives using [Et3NH]HSO4 as a reusable catalyst

A simple, efficient, and eco-friendly procedure has been developed using acidic ionic liquid [Et₃NH]HSO₄ as catalyst for the synthesis of novel [1,3]oxazino[5,6-c]quinolin-5-one derivatives via one-pot three-component condensation reaction of 4-hydroxyquinolin-2(1H)-one, amine and formaldehyde in aqueous ethanol at room temperature. Mild and environmentally benign reaction conditions, short reaction time, good to excellent yields, nontoxic, cheap and easily available catalyst, reusability of catalyst and reaction media, and easy work-up are the key features of this method.