Synthesis and characterization of the rare-earth dicyanamides Ln[N(CN)2]3 with Ln=La, Ce, Pr, Nd, Sm, and Eu

The rare-earth dicyanamides Ln[N(CN)₂]₃ (Ln=La, Ce, Pr, Nd, Sm, Eu) were obtained via ion exchange in aqueous medium and subsequent drying: The crystal structures were solved and refined based on X-ray powder diffraction data and they were found to be isotypic: Ln[N(CN)₂]₃; Cmcm (no. 63), Z=4, Ln=La: , , ; Ce: , , ; Pr: , , ; Nd: , , ; Sm: , , ; Eu: , , ). The compounds represent the first dicyanamides with trivalent cations. The Ln³⁺ ions are coordinated by three bridging N atoms and six terminal N atoms of the dicyanamide ions forming a three capped trigonal prism. The structure type is related to that of PuBr₃. The novel compounds Ln[N(CN)₂]₃ have been characterized by IR and Raman spectroscopy (Ln=La) and the thermal behavior has been monitored by differential scanning calorimetry (Ln=Ce, Nd, Eu).     

Tetragonal low-temperature structure of LiAl

The cubic face-centered structure of LiAl (, at ) transforms into a tetragonal body-centered structure (I4₁/amd, , at ). This first-order phase transition at about during heating is probably the reason for the so-called “ anomalies” in some physical properties like specific heat, electrical resistivity and nuclear-spin lattice relaxation. This transition seems to be correlated with the composition Li:Al of the alloy and the amount of Li vacancies.     

Monitoring structural transformations in crystals. Part 4. Monitoring structural changes in crystals of pyridine analogs of chalcone during [2+2]-photodimerization and possibilities of the reaction in hydroxy derivatives

We studied the [2+2]-photodimerization in crystals of pyridine analogs and hydroxy derivatives of chalcone using the X-ray structure analysis. The mutual orientation of adjacent molecules in the crystals was analyzed in a quantitative way and the results were compared with data for known photoactive crystals undergoing the [2+2]-photodimerization. In the case of one pyridine analog, we processed the single-crystal-to-single-crystal photodimerization and determined the structure for the mixed crystal containing both the substrate and the product. We also explained a role of hydrogen bonds in the [2+2]-photodimerization in the case of the hydroxy derivatives of chalcone. C₅H₄N-CO-CHCH-C₆H₅: , , , β=91.318(10)°, monoclinic, . The irradiated crystal of the above analog: , , , β=91.870(10)°, monoclinic, . C₆H₅-CO-CHCH-C₅H₄N: , , , β=110.01(3)°, monoclinic, C2/c,Z=8. C₆H₅-CO-CHCH-C₆H₄(o-OH): , , , β=109.73(5)°, monoclinic, . C₆H₅-CO-CHCH-C₆H₄(p-OH): , , , orthorhombic, .     

Synthesis and application of novel ionic phosphine ligands with a cobaltocenium backbone

Six novel ionic phosphine ligands with a cobaltocenium backbone, 1,1′-bis(dicyclohexylphosphino) cobaltocenium hexafluorophosphate () (1a), 1,1′-bis(di-iso-propylphosphino) cobaltocenium hexafluorophosphate () (2a), 1,1′-bis(di-tert-butylphosphino) cobaltocenium hexafluorophosphate () (3a), and the monophosphine ligand (Cc⁺ = cobaltocenium; R = Cy, 1b; R = i-Pr, 2b; R = t-Bu, 3b) were synthesized and characterized by elemental analysis, spectroscopy, and X-ray diffraction techniques. These ligands are air-stable and useful for Suzuki coupling reactions in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (), enabling high catalytic activity.     

A selective and sensitive ‘naked eye’ anion detector based on an imine-π-TCNQ assembly

A colorimetric heterocyclic imine based chemosensor is designed for detection of and under physiological pH conditions. The charge-transfer (CT) sensor is highly coloured with and recognition giving rise to a purple-to-yellow colour change that is visible to the naked eye and is reversible upon removal of anion.     

Syntheses of [F]5-fluoro-3-nitro-l-tyrosine

The detection of 3-nitro-l-tyrosine has been used as a biomarker of “reactive nitrogen species” in biological matrices and has been an ongoing challenge in analytical chemistry. In this work, fluorine-18 labelled 5-fluoro-3-nitro-l-tyrosine (FNT) was synthesized as a potential radiotracer to probe the biological fate of 3-nitro-l-tyrosine. The synthesis of []FNT was carried out by reaction of []3-fluoro-l-tyrosine with NaNO₃ in TFA solvent for 5 min at 4 °C. The radiochemical yield (RCY) of []FNT was 96±2% and []3-fluoro-l-tyrosine, was 29±1%, relative to []3-fluoro-l-tyrosine and []F₂, respectively. The syntheses of []FNT were also accomplished by direct fluorination of 3-nitro-l-tyrosine with []F₂ and by nitration of l-tyrosine with NaNO₃, followed by fluorination, in TFA (4 °C) or anhydrous HF (−65 °C) solvent. The latter two synthetic routes produced []FNT in 13.5±1.5% RCY, within 1 h. Products were characterized by use of , and NMR spectroscopy and mass spectrometry.     

Oxidative addition to main group versus transition metals: Insights from the Activation Strain model

We have studied the oxidative addition of the methane C-H and chloromethane C-Cl bonds to a number of main group (Be, Mg and Ca) and transition metals (Pd, Zn and Cd), using relativistic density functional theory (DFT) at ZORA-BLYP/TZ2P. The purpose is to better understand what causes the characteristic differences in reactivity between main group and transition metals towards oxidative addition. Thus, we have analyzed our model reactions using the Activation Strain model in which the activation energy ΔE^≠ is decomposed into the activation strain of and the stabilizing TS interaction between the reactants in the activated complex: . Activation of the C-H bond goes with higher barriers than activation of the C-Cl bond because the higher bond strength of the former translates into a higher activation strain . The barriers for bond activation increase along Pd < Be, Ca < Mg < Zn, Cd. This can be straightforwardly understood through the TS-interaction , that is, in terms of the bonding capabilities of the metals. Pd yields the lowest barriers because it achieves the most stabilizing . This is the result of the small HOMO-LUMO gap between its occupied 4d and unfilled 5s AOs, which makes Pd both a good electron donor and acceptor. Zn and Cd yield the highest barriers because the large HOMO-LUMO gap between the occupied valence ns and unfilled valence np AOs makes them both poor donors and poor acceptors of electronic charge.     

Temperature-dependent diffraction studies on the phase evolution of tetraindium heptabromide

The mixed-valent compound In₄Br₇ undergoes a higher-order phase transition below which leads to a decrease in symmetry from the trigonal to the monoclinic (C2/c) system via . The phase transition has been monitored by X-ray powder diffraction using a linear position-sensitive detector between 15 and , and the crystal structures at room temperature and at 90 K have been refined by means of time-of-flight neutron powder-diffraction data; at , the lattice parameters are , , , and β=98.20(1)°; the new unit cell contains 88 atoms (Z=8) of which 12 are symmetry-independent. Due to their electronic instability because of a second-order Jahn-Teller effect, two of the three crystallographically independent monovalent indium cations are severely affected by the phase transition with respect to their coordination spheres; bond-valence calculations reveal significant strengthening of In⁺-Br⁻ bonding upon symmetry reduction. Structural changes and group-subgroup relationships as well as possible intermediate phases are discussed.     

The disordered structures and low temperature dielectric relaxation properties of two misplaced-displacive cubic pyrochlores found in the Bi2O3-MO-Nb2O5 (M=Mg, Ni) systems

The disordered structures and low temperature dielectric relaxation properties of Bi_1.667Mg_0.70Nb_1.52O₇ (BMN) and Bi_1.67Ni_0.75Nb_1.50O₇ (BNN) misplaced-displacive cubic pyrochlores found in the Bi₂O₃-M^IIO-Nb₂O₅ (M=Mg, Ni) systems are reported. As for other recently reported Bi-pyrochlores, the metal ion vacancies are found to be confined to the pyrochlore A site. The B₂O₆ octahedral sub-structure is found to be fully occupied and well-ordered. Considerable displacive disorder, however, is found associated with the O′A₂ tetrahedral sub-structure in both cases. The A-site ions were displaced from Wyckoff position 16d (, , ) to 96 h (, , ) while the O′ oxygen was shifted from position 8b (, , ) to Wyckoff position 32e (, , ). The refined displacement magnitudes off the 16d and 8b sites for the A and O′ sites were 0.408 Å/0.423 Å and 0.350 Å/0.369 Å for BMN/BNN, respectively.     

Ruthenium (II) complexes of the chelating phosphine borane H2ClB · dppm

Reaction of H₂ClB · PPh₂CH₂PPh₂ (H₂ClB · dppm) with results in displacement of all three acetonitrile ligands and the formation of (1), which has been characterised crystallographically. Reaction with carbon monoxide results in a change from η² to η¹ of the borane ligand to afford (2). Compound 1 undergoes H/D exchange under a D₂ atmosphere to afford , while 2 does not.     

Effect of initial monomer concentration on the equilibrium swelling and elasticity of hydrogels

The linear swelling ratio α and the effective network chain length N of a series of poly(N,N-dimethylacrylamide) (PDMAAm) hydrogels were investigated as a function of the gel preparation concentration . PDMAAm hydrogels were prepared at a fixed cross-linker ratio but at various initial monomer concentrations. It was found that α is not a monotonic function of . As is increased, α first decreases up to about and remains constant in a narrow range of , but then it increases continuously. The -dependence of α is due to the variation of the network chain length N depending on the gel preparation concentration. In the range of below 0.1, N follows the scaling relationship , while at higher concentrations, N varies only slightly with . The increase of α with N obeys the relation , as predicted by the Flory-Rehner theory.     

Synthesis, crystal structure, and electronic structure of RbVSe2

RbVSe₂ has been synthesized at 773 K through the reaction of V and Se with a Rb₂Se₃ reactive flux. The compound crystallizes in the orthorhombic space group D_2h²⁴-Fddd with 16 formula units in a cell of dimensions , , and at . The structure possesses infinite one-dimensional chains of edge-sharing VSe₄ tetrahedra separated from the Rb⁺ ions. These chains distort slightly to chains. The V-V distance within these chains is 2.8362(4) Å. First-principles total energy calculations indicate that a non-magnetic configuration for the V³⁺ cations is the most stable.     

A novel calix[4]arene-based neutral semicarbazone receptor for anion recognition

A series of novel calix[4]arene-based neutral semicarbazone and thiosemicarbazone receptors have been synthesized and characterized. The molecular receptor 4a recognizes in preference to other anions (Cl⁻, Br⁻, I⁻, , and ) through a 1:1 binding-stoichiometry.