Coordinating properties of [M(CO)5(CN)] [M=Cr; Mo; W] ligands: formation of ion pairs or dinuclear cyanide-bridged complexes, spectroscopic and X-ray diffraction studies

The reaction of sodium cyanopentacarbonylmetalates Na[M(CO)₅(CN)] (M=Cr; Mo; W) with cationic Fe(II) complexes [Cp(CO)(L)Fe(thf)][O₃SCF₃], [L=PPh₃ (1a), CN-Benzyl (1b), CN-2,6-Me₂C₆H₃ (1c); CN-Bu^t (1d), P(OMe)₃ (1e), P(Me)₂Ph (1f)] in acetonitrile solution, yielded the metathesis products [Cp(CO)(L)Fe(NCCH₃)][NCM(CO)₅] [M=W, L=PPh₃ (2a), CN-Benzyl (2b), CN-2,6-Me₂C₆H₃ (2c); CN-Bu^t (2d), P(OMe)₃ (2e), P(Me)₂Ph (2f); M=Cr, L=(PPh₃) (3a), CN-2,6-Me₂C₆H₃ (3c); M=Mo, L=(PPh₃) (4a), CN-2,6-Me₂C₆H₃ (4c)]. The ionic nature of such complexes was suggested by conductivity measurements and their main structural features were determined by X-ray diffraction studies. Well-resolved signals relative to the [M(CO)₅(CN)] moieties could be distinguished only when ¹³C NMR experiments were performed at low temperature (from −30 to −50 °C), as in the case of [Cp(CO)(PPh₃)Fe(NCCH₃)][NCW(CO)₅] (2a) and [Cp(CO)(Benzyl-NC)Fe(NCCH₃)][NCW(CO)₅] (2b). When the same reaction was carried out in dichloromethane solution, neutral cyanide-bridged dinuclear complexes [Cp(CO)(L)FeNCM(CO)₅] [M=W, L=PPh₃ (5a), CN-Benzyl (5b); M=Cr, L=(PPh₃) (6a), CN-2,6-Me₂C₆H₃ (6c), CO (6g); M=Mo, L=CN-2,6-Me₂C₆H₃ (7c), CO (7g)] were obtained and characterized by infrared and NMR spectroscopy. In all cases, the room temperature ¹³C NMR measurements showed no broadening of cyano pentacarbonyl signals and, relative to tungsten complexes [Cp(CO)(PPh₃)FeNCW(CO)₅] (5a) and [Cp(CO)(CN-Benzyl)FeNCW(CO)₅] (5b), the presence of ¹⁸³W satellites of the ¹³CN resonances (J_CW ∼ 95 Hz) at room temperature confirmed the formation of stable neutral species. The main ¹³C NMR spectroscopic properties of the latter compounds were compared to those of the linkage isomers [Cp(CO)(PPh₃)FeCNW(CO)₅] (8a) and [Cp(CO)(CN-Benzyl)FeCNW(CO)₅] (8b). The characterization of the isomeric couples 5a-8a and 5b-8b was completed by the analyses of their main IR spectroscopic properties. The crystal structures determined for 2a, 5a, 8a and 8b allowed to investigate the geometrical and electronic differences between such complexes. Finally, the study was completed by extended Hückel calculations of the charge distribution among the relevant atoms for complexes 2a, 5a and 8a.     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Structural investigations on new iron-acyl derivatives of B(C6F5)3

Reactions between [Fe(η-C₅H₅)(MeCO)(CO)(L)], L = PPh₃ (1), PMe₃ (2), PPhMe₂ (3), PCy₃ (4), CO (5), and B(C₆F₅)₃ give new complexes [Fe(η-C₅H₅){MeCOB(C₆F₅)₃}(CO)(L)] L = PPh₃ (7), PMe₃ (8), PPhMe₂ (9), PCy₃ (10), CO (11), where B(C₆F₅)₃ coordinates selectively to the O-acyl groups. Hydrolysis of 7 gives [Fe(η-C₅H₅){HOB(C₆F₅)₃}(CO)(PPh₃)] (6). The X-ray structures of 6, 8 and 11 have been determined. Calculations, using density functional theory, demonstrate that the charge transfer to the acyl group on Lewis acid coordination is more significant in the σ than the π system. Both effects lead to a lengthening of the acyl C-O bond thus π populations cannot be inferred from the distance changes.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Metallacyclic complexes with ortho-stannylated triphenylphosphine ligands, LnOs(κ(Sn,P)-SnMe2C6H4PPh2), derived from thermal reactions of the five-coordinate complex, Os(SnMe3)Cl(CO)(PPh3)2

Heating the five-coordinate trimethylstannyl complex, Os(SnMe₃)Cl(CO)(PPh₃)₂, in solution with triphenylphosphine induces an ortho-stannylation of one phenyl group of a triphenylphosphine ligand and an ortho-metallation of another triphenylphosphine ligand, to produce the metallacyclic complexes, Os(κ²(Sn,P)-SnMeClC₆H₄PPh₂)(κ²(C,P)-C₆H₄PPh₂)(CO)(PPh₃) (1) and Os(κ²(Sn,P)-SnMe₂C₆H₄PPh₂)(κ²(C,P)-C₆H₄PPh₂)(CO)(PPh₃) (2), suggesting the possible intermediacy of a complex with a coordinated stannylene ligand. Spectroscopic data indicate that only one diastereomer of 1 is formed and crystal structure determination of 1 reveals that this is the diastereomer with chloride directed towards the CO ligand. Complex 2 is converted to 1 through a redistribution reaction with SnMe₂Cl₂. Heating the six-coordinate trimethylstannyl complex, Os(SnMe₃)Cl(CO)₂(PPh₃)₂, in solution produces the osmium(II) methyl complex, Os(Me)(SnMe₂Cl)(CO)₂(PPh₃)₂ (3), through an exchange of methyl and chloride groups on the tin and osmium. In this rearrangement, the relative locations of the two CO ligands and the two PPh₃ ligands remains unchanged. However, when the six-coordinate trimethylstannyl complex, Os(SnMe₃)Cl(CO)₂(PPh₃)₂ is heated under CO, the same exchange reaction is observed but the mono-triphenylphosphine, tricarbonyl complex, Os(Me)(SnMe₂Cl)(CO)₃(PPh₃) (4), is produced and here the SnMe₂Cl ligand is located trans to the PPh₃ ligand. Crystal structure determinations for 1, 2, 3, and 4 have been obtained.     

Pyridine- and pyrimidine-2-thiolate complexes of ruthenium

A series of mononuclear ruthenium complexes containing pyridine- and pyrimidine-2-thiolato ligands was prepared and characterized. The new compounds of general formula CpRu(PPh₃)(κ²S,N-SR) (1) (SR = pyridine-2-thiolate (a), pyrimidine-2-thiolate (b)) were prepared directly by reacting the thiolato anions (RS⁻) with CpRu(PPh₃)₂Cl. Complexes 1 readily react with NOBF₄ or CO in THF at room temperature to give [CpRu(PPh₃)(NO)(κ¹S-HSR)][BF₄]₂ (2) and CpRu(PPh₃)(CO)(κ¹S-SR) (3), respectively. The one-pot reaction of CpRu(PPh₃)₂Cl, thiolato anions and bis(diphenylphosphino)ethane (dppe) gave CpRu(dppe)(κ¹S-SR) [dppe: Ph₂PCH₂CH₂PPh₂ (4)]. The complex salts, [CpRu(PPh₃)₂(κ¹S-HSR)]BPh₄ (5) are prepared by mixing CpRu(PPh₃)₂Cl, HSR and NaBPh₄ at room temperature. The structures of CpRu(PPh₃)(κ²S,N-Spy) (1a), [CpRu(PPh₃)(NO)(κ¹S-HSpy)][BF₄]₂ (2a) and CpRu(PPh₃)(CO)(κ¹S-Spy) (3a), (py = C₅H₄N) have been determined.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Metallacyclic complexes with ortho-silylated triphenylphosphine ligands, LnOs(κ(Si,P)-SiMe2C6H4PPh2), derived from thermal reactions of the coordinatively unsaturated trimethylsilyl, methyl complex, Os(SiMe3)(Me)(CO)(PPh3)2

Reaction between Os(SiCl₃)Cl(CO)(PPh₃)₂ and five equivalents of MeLi produces a colourless intermediate, tentatively formulated as the lithium salt of the six-coordinate, dimethyl, trimethylsilyl-containing complex anion, Li[Os(SiMe₃)(Me)₂(CO)(PPh₃)₂]. Reaction of this material with ethanol releases methane and gives the red, coordinatively unsaturated methyl, trimethylsilyl-containing complex, Os(SiMe₃)(Me)(CO)(PPh₃)₂ (1). An alternative synthesis of 1 is to add one equivalent of MeLi to Os(SiMe₃)Cl(CO)(PPh₃)₂, which in turn is obtained by adding three equivalents of MeLi to Os(SiCl₃)Cl(CO)(PPh₃)₂. Treatment of 1 with p-tolyl lithium, again gives a colourless intermediate which may be Li[Os(SiMe₃)(Me)(p-tolyl)(CO)(PPh₃)₂], and reaction with ethanol gives the red complex, Os(SiMe₃)(p-tolyl)(CO)(PPh₃)₂ (3). Complexes 1 and 3 are readily carbonylated to Os(SiMe₃)(Me)(CO)₂(PPh₃)₂ (2) and Os(SiMe₃)(p-tolyl)(CO)₂(PPh₃)₂ (4), respectively. Heating Os(SiMe₃)Cl(CO)(PPh₃)₂ in molten triphenylphosphine results only in loss of the trimethylsilyl ligand and formation of the previously known complex containing an ortho-metallated triphenylphosphine ligand, Os(κ²(C,P)-C₆H₄PPh₂)Cl(CO)(PPh₃)₂. In contrast, heating the five-coordinate osmium-methyl complex, Os(SiMe₃)(Me)(CO)(PPh₃)₂ (1), in the presence of triphenylphosphine results mainly, not in tetramethylsilane elimination, but in ortho-silylation as well as ortho-metallation of different triphenylphosphine ligands giving, Os(κ²(Si,P)-SiMe₂C₆H₄PPh₂)(κ²(C,P)-C₆H₄PPh₂)(CO)(PPh₃) (5). A byproduct of this reaction is the non-silicon containing di-ortho-metallated complex, Os(κ²(C,P)-C₆H₄PPh₂)₂(CO)(PPh₃) (6). A similar reaction occurs when Os(SiMe₃)(Me)(CO)(PPh₃)₂ (1) is heated in the presence of tri(N-pyrrolyl)phosphine producing Os(κ²(Si,P)-SiMe₂C₆H₄PPh₂)(κ²(C,P)-C₆H₄PPh₂)(CO)[P(NC₄H₄)₃] (7) but a better synthesis of 7 is to treat 5 directly with tri(N-pyrrolyl)phosphine. Heating the six-coordinate complex, Os(SiMe₃)(Me)(CO)₂(PPh₃)₂ (2), gives two complexes both containing ortho-metallated triphenylphosphine, one with loss of the trimethylsilyl ligand, giving the known complex, Os(κ²(C,P)-C₆H₄PPh₂)H(CO)₂(PPh₃), and the other with retention of the trimethylsilyl ligand, giving Os(SiMe₃)(κ²(C,P)-C₆H₄PPh₂)(CO)₂(PPh₃) (8). Crystal structure determinations for 5, 6, 7 and 8 have been obtained.     

Highly stereoselective synthesis of para-substituted (E)-N-styrylcarbazoles via sequential silylative coupling-Hiyama coupling reaction

A series of new para-substituted (E)-(N)-styrylcarbazoles, i.e., eight (E)-9-[2-(aryl)ethenyl]-9H-carbazoles (5-12) and 1,4-bis[(E)-2-(9H-carbazol-9-yl)vinyl]benzene (13), have been synthesized in high yield and stereoselectively by a sequential silylative coupling-Hiyama coupling reaction, i.e., coupling of commercially available 9-vinylcarbazole with vinyltriethoxysilane or divinyltetramethyldisiloxane in the presence of [RuHCl(CO)(PCy₃)₂] (I), followed by Pd (II) catalyzed cross-coupling with para-substituted iodobenzenes.The tandem procedure has facilitated the synthesis of 13. X-ray structures of the intermediate silylvinylcarbazole (4), as well as products 12 and 13 have been obtained.     

Monomeric and dimeric ruthenium thiooxalate complexes: Structures of CpRu(PPh3)2SCOCO2Me and CpRu(dppe)SCOCO2Et

The hydrosulfido complexes CpRu(L)(L′)SH react with one equivalent of O-alkyl oxalyl chlorides (ROCOCOCl) to form the corresponding O-alkylthiooxalate complexes CpRu(L)(L′)SCOCO₂R (L = L′ = PPh₃ (1), (2); L = PPh₃, L′ = CO (3); R = Me (a), Et (b)). The reactions of the hydrosulfido complexes with half equivalent of oxalyl chloride produce the bimetallic complexes [CpRu(L)(L′)SCO]₂ (L = L′ = PPh₃ (4), (5); L = PPh₃, L′ = CO (6)). The crystal structures of CpRu(PPh₃)₂SCOCO₂Me (1a) and CpRu(dppe)SCOCO₂Et (2b) are reported.     

Synthesis and characterization of some novel ruthenium(II) complexes containing thiolate ligands

Reactions of the ruthenium complexes [RuH(CO)Cl(PPh₃)₃] and [RuCl₂(PPh₃)₃] with hetero-difunctional S,N-donor ligands 2-mercapto-5-methyl-1,3,5-thiadiazole (HL¹), 2-mercapto-4-methyl-5-thiazoleacetic acid (HL²), and 2-mercaptobenzothiazole (HL³) have been investigated. Neutral complexes [RuCl(CO)(PPh₃)₂(HL¹)] (1), [RuCl(CO)(PPh₃)₂(HL²)] (2), [RuCl(CO)(PPh₃)₂(HL³)] (3), [Ru(PPh₃)₂(HL¹)₂] (4), [RuCl(PPh₃)₃(HL²)] (5), and [RuCl(PPh₃)₃(HL³)] (6) imparting κ²-S,N-bonded ligands have been isolated from these reactions. Complexes 1 and 4 reacted with diphenyl-2-pyridylphosphine (PPh₂Py) to give neutral κ¹-P bonded complexes [RuCl(CO)(κ¹-P-PPh₂Py)₂(HL¹)] (7), and [Ru(κ¹-P-PPh₂Py)₂(HL¹)₂] (8). Complexes 1-8 have been characterized by analytical, spectral (IR, NMR, and electronic absorption) and electrochemical studies. Molecular structures of 1, 2, 4, and 7 have been determined crystallographically. Crystal structure determination revealed coordination of the mercapto-thiadiazole ligands (HL¹-HL³) to ruthenium as κ²-N,S-thiolates and presence of rare intermolecular S-S weak bonding interaction in complex 1.     

Reactivities governed by a single metal atom M in mixed-metal highnuclearity clusters having [Ru5M(C)] core (M = Co, Rh, Pd): Site-nonselective, site-selective, and chemo-selective variations in the SO2-trapping reactions

The SO₂ substitution for a CO ligand of the hexa-nuclear carbonyl complexes having Ru₅M(C) type carbido-metal core, [PPN][Ru₅Co(C)(CO)₁₆] (2), [PPN][Ru₅Rh(C)(CO)₁₆] (3), and Ru₅Pd(C)(CO)₁₆ (4), is dramatically affected by the kind of metal atom M: 2 (M = Co) is reactive but not site-selective, 3 (M = Rh) is reactive and site-selective, whereas 4 (M = Pd) is not reactive at all even though 4 can easily react with PPh₃ to give the substitution products.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Synthesis of novel 5-amino-1-aroylpyrazoles

A series of 5-amino-1-aroylpyrazoles 3 are synthesized directly by the reaction of β-aminocrotononitrile 1 with some structures containing the hydrazine moiety (X-NHNH₂) 2 by refluxing ethanol in presence of sodium acetate. When semicarbazide 3i was used (X = CONH₂), the reaction afforded the unexpected 7-aminopyrazolo[1,5-a]pyrimidine 4.     

Novel hydridotris(pyrazolyl)borate ruthenium(II) complexes containing the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane: Synthesis and evaluation of DNA binding properties

A series of half-sandwich ruthenium(II) complexes containing κ³(N,N,N)-hydridotris(pyrazolyl)borate (κ³(N,N,N)-Tp) and the water-soluble phosphane 1,3,5-triaza-7-phosphaadamantane (PTA) [RuX{κ³(N,N,N)-Tp}(PPh₃)_2−n(PTA)_n] (n = 2, X = Cl (1), n = 1, X = Cl (2), I (3), NCS (4), H (5)) and [Ru{κ³(N,N,N)-Tp}(PPh₃)(PTA)L][PF₆] (L = NCMe (6), PTA (7)) have been synthesized. Complexes containing 1-methyl-3,5-diaza-1-azonia-7-phosphaadamantane(m-PTA) triflate [RuCl{κ³(N,N,N)-Tp}(m-PTA)₂][CF₃SO₃]₂ (8) and [RuX{κ³(N,N,N)-Tp}(PPh₃)(m-PTA)][CF₃SO₃] (X = Cl (9), H (10)) have been obtained by treatment, respectively, of complexes 1, 2 and 5 with methyl triflate. Single crystal X-ray diffraction analysis for complexes 1, 2 and 4 have been carried out. DNA binding properties by using a mobility shift assay and antimicrobial activity of selected complexes have been evaluated.     

Arenechromiumtricarbonyl complexes of silyl(germyl)(stannyl)- and silyl(germyl)(plumbyl)methanes including the unexpected formation of arenechromiumtricarbonyldimethylsilanol, (η-C6H5)Cr(CO)3SiMe2OH

Treatment of PhMe₂SiCH₂GeMe₃ (1) with t-BuLi followed by addition of Me₃ECl, E = Sn, Pb, results in the formation of phenylsilyl(germyl)stannyl- and phenylsilyl(germyl)plumbyl-methanes, PhMe₂Si(Me₃Ge)(EMe₃)CH, E = Sn (2), Pb (3). The thermal reaction of 1, 2 and 3 with Cr(CO)₆ yields the corresponding aryl-Cr(CO)₃ analogs, {(η⁶-C₆H₅)Cr(CO)₃}Me₂Si(Me₃Ge)CH₂ (4) and {(η⁶-C₆H₅)Cr(CO)₃}Me₂Si(Me₃Ge)(EMe₃)CH, E = Sn (5), Pb (6). The thermal treatment of 2 with Cr(CO)₆ in a wet THF/di-n-butyl ether mixture results in the formation of the arenechromiumtricarbonyl silanol {(η⁶-C₆H₅)Cr(CO)₃}Me₂SiOH (7) which exhibits amphiphilic character, forming H-bonded chains in the solid state in a head-to-head arrangement of the areneCr(CO)₃ units.     

Palladium-catalyzed oxyarylation of olefins using silver carbonate as the base. Probing the mechanism by electrospray ionization mass spectrometry

The Pd(OAc)₂-catalyzed oxyarylation of electron-rich (8 and 12) and electron-poor (10) olefins by ortho-iodophenols (3a-d) was studied using Ag₂CO₃ as the base, in acetone, and in the presence and absence of PPh₃. The corresponding adducts of oxyarylation were obtained in moderate yields. The reaction mechanism was examined by electrospray ionization mass spectrometry (ESI-MS). Cationic arylpalladium intermediate (14), formed by the oxidative insertion of Pd(0) into 3a, and the cationic palladacycles (15), obtained by reaction of 14 with olefins 8 and 12, were intercepted by ESI-MS and characterized by ESI-MS/MS.     

Syntheses and characterization of cyano-bridged homo and hetero bimetallic complexes containing η and η-cyclic hydrocarbons

The reactions of [(ind)Ru(PPh₃)₂CN] (ind = η⁵-C₉H₇) (1) and [CpRu(PPh₃)₂CN] (Cp = η⁵-C₅H₅) (2) with [(η⁶-p-cymene)Ru(bipy)Cl]Cl (bipy = 2,2′-bipyridine) (3) in the presence of AgNO₃/NH₄BF₄ in methanol, respectively, yielded dicationic cyano-bridged complexes of the type [(ind)(PPh₃)₂Ru(μ-CN)Ru(bipy)(η⁶-p-cymene)](BF₄)₂ (4) and [Cp(PPh₃)₂Ru(μ-CN)Ru(bipy)(η⁶-p-cymene)](BF₄)₂ (5). The reaction of [CpRu(PPh₃)₂CN] (2), [CpOs(PPh₃)₂CN] (6) and [CpRu(dppe)CN] (7) with the corresponding halide complexes and [(η⁶-p-cymene)RuCl₂]₂ formed the monocationic cyano-bridge complexes [Cp(PPh₃)₂Ru(μ-CN)Os(PPh₃)₂Cp](BF₄) (8), [Cp(PPh₃)₂Os(μ- CN)Ru(PPh₃)₂Cp](BF₄) (9) and [Cp(dppe)Ru(μ-CN)Os(PPh₃)₂Cp](BF₄) (10) along with the neutral complexes [Cp(PPh₃)₂Ru(μ-CN)Ru (η⁶-p-cymene)Cl₂] (11), [Cp(PPh₃)₂Os(μ-CN)Ru(η⁶-p-cymene)Cl₂] (12), and [Cp(dppe) Ru(μ-CN)Ru(η⁶-p-cymene)Cl₂] (13). These complexes were characterized by FT IR, ¹H NMR, ³¹P{¹H} NMR spectroscopy and the molecular structures of complexes 4, 8 and 11 were solved by X-ray diffraction studies.