Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Synthesis of 1,4-disilacyclohexa-2,5-dienes

Title compounds of the type 2,3,5,6-tetraphenyl-1,4-di-X-1,4-di-Y-1,4-disilacyclohexa-2,5-diene wherein X=Y=NMe₂ (4); X=NMe₂, Y=Cl (cis, trans-5); X=NMe₂, Y=Me [(trans)-6] and X=t-Bu, Y=Cl (trans-8) were synthesized from Si₂(NMe₂)₅Cl, sym-Si₂(NMe₂)₄Cl₂, sym-Si₂(NMe₂)₄Me₂, and sym-Si₂Cl₄(t-Bu)₂, respectively, in the presence of diphenylacetylene at 200 °C. Similarly the analogous title compound from the combination of 1-phenyl-1-propyne and Si₂(NMe₂)₅Cl [X=Y=NMe₂ (cis and trans-7) was synthesized. In all cases where cis/trans diastereomers could arise from two different silicon substituents (5, 6, 8) the trans isomer was the sole or dominant product. Evidence for the intermediacy of the silylene Si(NMe₂)₂ in these reactions was gained from a trapping experiment. Compound 4 upon treatment with SiCl₄, SiBr₄ or PI₃ provided the corresponding 1,1,4,4-tetrahalo derivatives 9a-c, respectively. Treatment of 4 with MeOH or PhOH gave the 1,1,4,4-tetramethoxy and tetraphenoxy analogues 9d and 9e, respectively. The tetrachloro derivative 9a upon LAH reduction led to the corresponding tetrahydro compound 10, while the reaction of 9a with H₂O gave the tetrahydroxy derivative 11. Allowing (trans)-6 to react with SiCl₄ provided a ca. 1:1 cis/trans ratio of the derivative 12 in which X=Cl, Y=Me, and possible pathways that rationalize this loss of stereochemistry are proposed. Synthesis of trans-13 in which X=t-Bu, Y=H was achieved by LAH reduction of 8. All of the title compounds except 8 experience free phenyl rotation at room temperature. At −30 °C this rotation in 8 is essentially halted. The molecular structures of 4, 8, 9c, 9e, 10 and 13 were determined by X-ray crystallography.     

Reversible pyranyl complex formation and the mechanism of rearrangement to (η-6-oxocycloheptadienyl)Mn(CO)3 complexes in the reaction of β-cyclomanganated 1,5-diarylpenta-1,4-dien-3-ones and alkynes; the crystal structure of [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η]tricarbonylmanganese

[1-Phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1a) reacts with PhCCH in CCl₄ at room temperature to form [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η⁵]tricarbonylmanganese (2a), whose X-ray crystal structure is reported to complement that of its isomer [6-oxo-2,4,7-triphenylcyclohepta-1,4-dienyl-1,2,3,4,5-η]tricarbonylmanganese (3a), previously obtained from the reaction under reflux; but for 1a and PhCCPh the pyranyl complex cannot be isolated before rearrangement to the 3a analogue occurs. More forcing reaction conditions for 1a with Me₃SiCCH and for [1-(2-trifluoromethylphenyl)-2-[(E)-3-(2-trifluoromethylphenyl)prop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1b) with Me₃SiCCH and PhCCH give new analogues of 3a where previously only 2a analogues had been isolated.The reaction in CCl₄ under reflux of PhCCH and the β-deuterio analogue of 1a, [1-phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-3d-κO]ethenyl-κC¹]tetracarbonylmanganese, gave deuteriated 3a with exo-D at the α-carbon, C7. This is inconsistent with the Mn-mediated Ph migration mechanism originally proposed to accommodate the endo position of Ph in 3a, and instead it implicates a cyclopropyl carbonyl-addition intermediate or a cyclopropyl acyl-substitution transition state in the key rearrangement step for 2a → 3a.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).     

Arene-catalysed lithiation of phenyl- and 1,1-diphenylcyclopropane: synthetic applications

The reaction of phenylcyclopropane (1) with an excess of lithium and a catalytic amount of DTBB (2.5% molar) in THF at room temperature, followed by treatment with an electrophile [Me₃SiCl, PhMe₂SiCl, t-BuCHO, PhCHO, Me₂CO, Et₂CO, (CH₂)₅CO, adamantan-2-one, i-Pr₂CO, di(cyclopropyl)ketone] and final hydrolysis with water leads to allylic products 10 or 11 depending on the structure of the electrophile: whereas for chlorosilanes or crowded ketones γ-products 11 are isolated, for aldehydes and non-congested ketones α-products 10 are formed. The application of the same protocol to 1,1-diphenylcyclopropane (7) leads to a mixture of products 13-15 resulting from the introduction of one or two electrophilic fragments to the open-chain mono- or dilithiated intermediate: also in this case the regiochemistry of the reaction is governed by steric reasons.     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

Synthesis, characterization, and reactivity of new types of constrained geometry group 4 metal complexes derived from picolyl-substituted dicarbollide ligand systems

The syntheses of group 4 metal complexes containing the picolyldicarbollyl ligand Dcab^PyH [nido-7-HNC₅H₄(CH₂)-8-R-7,8-C₂B₉H₁₀] (2) are reported. New types of constrained geometry group 4 metal complexes (Dcab^Py)MCl₂, [{(η⁵-RC₂B₉H₉)(CH₂)(η¹-NC₅H₄)}MCl₂] (M = Ti, 3; Zr, 4; R = H, a; Me, b), were prepared by the reaction of 2 with M(NMe₂)₂Cl₂ (M = Ti, Zr). The reaction of 2 with M(NMe₂)₄ in toluene afforded (Dcab^Py)M(NMe₂)₂, [{(η⁵-RC₂B₉H₉)(CH₂)(η¹-NC₅H₄)}M(NMe₂)₂] (M = Ti, 5; Zr, 6; R = H, a; Me, b), which readily reacted with Me₃SiCl to yield the corresponding chloride complexes (Dcab^Py)MCl₂ (M = Ti, 3; Zr, 4; R = H, a; Me, b). The structures of the diamido complexes (Dcab^Py)M(NMe₂)₂ (M = Ti, 5; Zr, 6) were established by X-ray diffraction studies of 5a, 5b, and 6a, which verified an η⁵:η¹-bonding mode derived from the dicarbollylamino ligand. Related constrained geometry catalyst CGC-type alkoxy titanium complexes, (Dcab^Py)Ti(OⁱPr)₂ (7), were synthesized by the reaction of 2 with Ti(OⁱPr)₄. Sterically less demanding phenols such as 2-Me-C₆H₄OH replaced the coordinated amido ligands on (Dcab^Py)Ti(NMe₂)₂ (5a) to yield aryloxy stabilized CGC complexes (Dcab^Py)Ti(OPh^Me)₂(Ph^Me  =  2- Me-C₆H₄, 8). NMR spectral data suggested that an intramolecular Ti-N coordination was intact in solution, resulting in a stable piano-stool structure with two aryloxy ligands residing in two of the leg positions. The aryloxy coordinations were further confirmed by single crystal X-ray diffraction studies on complexes (Dcab^Py)Ti(OPh^Me)₂ (8).     

Micelles catalyzed one pot regio- and chemoselective synthesis of benzo[a]phenazines and naphtho[2,3-d]imidazoles ‘in H2O’

An efficient, novel, and concise one pot regio- and chemoselective synthesis of benzo[a]phenazines (4) and naphtho[2,3-d]imidazoles (8) has been accomplished in excellent yields by nucleophilic substitution reaction of 2,3-dichloro-1,4-naphthoquinone (1) with o-phenylenediamine (2) and benzamidines (7) respectively ‘in H₂O’ using base and micelles (SDS) as catalyst. Analog reaction of 2,3-dichloro-1,4-naphthoquinone (1) with 2-aminobenzenethiol (9) under identical conditions led to formation of a mixture of benzo[b]phenothiazine (10), benzo[a]phenothiazine (11), and benzo[a]-1,4-benzothiazino-3,2-phenothiazine (12) in 17%, 23%, and 57% yields, respectively.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Synthesis and photochemistry of pH-sensitive GFP chromophore analogs

GFP chromophore analogs (7a-e, 8, and 10a,b) containing 2-thienyl-, 5-methyl-2-furyl-, 2-pyrryl, and 6-methyl-2-pyridyl-groups were synthesized and their fluorescence spectra recorded in the pH range 1-7. NMR studies showed that protonation of 8 (2-thienyl system) inhibited photoisomerization (Z-E) about the exocyclic double bond but that protonation of 7c (E + Z) (2-pyrryl system) gave only 7cE. Fluorescence studies revealed enhancement of fluorescence intensity of 7c and 7b,e (furyl system) below pH 2.5 and gave a similar result for 10a (pyridyl system) below pH 6. Quantum yields at pH 1 were low, probably due to excited state proton transfer (ESPT).     

Synthesis of new tetracyclic 7-oxo-pyrido[3,2,1-de]acridine derivatives

A series of (±)3-hydroxyl- and 2,3-dihydroxy-2,3-dihydro-7-oxopyrido[3,2,1-de]acridines were synthesized for antitumor evaluation. These agents can be considered as analogues of glyfoline or (±)1,2-dihydroxyacronycine derivatives. The key intermediates, 3,7-dioxopyrido[3,2,1-de]acridines (15a,b or 24a,b), for constructing the target compounds were synthesized either from 3-(N,N-diphenylamino)propionic acid (14a,b) by treating with Eaton’s reagent (P₂O₅/MsOH) (Method 1) or from (9-oxo-9H-acridin-10-yl)propionic acid (23a-c) via ring cyclization under the same reaction conditions (Method 2). Compounds 15a,b and 24a,b were converted into (±)3-hydroxy derivatives (25a-d), which were then further transformed into pyrido[3,2,1-de]acridin-7-one (28a-d) by treating with methanesulfonic anhydride in pyridine via dehydration. 1,2-Dihydroxylation of 28a-d afforded (±)cis-2,3-dihydroxy-7-oxopyrido[3,2,1-de]acridine (29a-d). Derivatives of (±)3-hydroxy (25a,b) and (±)cis-2,3-dihydroxy (29a-d) were further converted into their O-acetyl congeners 26a,b and 30a-d, respectively. We also synthesized 2,3-cyclic carbonate (31, 32, and 33) from 29a-c. The anti-proliferative study revealed that these agents exhibited low cytotoxicity in inhibiting human lymphoblastic leukemia CCRF-CEM cell growth in culture.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Reactions of group 13 metal trialkyls with oxamides

Alkyl aluminum-, gallium-, and indium oxamidates Me₄Al₂(dpoa) (1), Me₄Al₂(dboa) (2), Me₄Ga₂(dpoa) (3), Me₄Ga₂(dboa) (4), ^tBu₄Ga₂(dpoa) (5) and Me₄In₂(dboa) (6) (dpoa-H₂ = N,N′-diphenyloxamide, dboa-H₂ = N,N′-di-tert-butyloxamide) have been prepared and characterized. Compounds 1-3, 5 and 6 exist in the form of isomers a only, with a skeleton framework of the molecules consisting of two almost flat, coplanar and fused MNOC₂ (M = Al, Ga, In) heterocyclic rings. Depending on the reaction conditions, the compound 4 was obtained as the isomer 4a or as the mixture of two isomers 4a and 4b. Molecular structures of the compounds 1a-6a have been determined by X-ray crystallography. A structure of the isomer 4b was proposed on the basis of NMR spectroscopy. A skeleton framework of the 4b molecule consists of two fused different cycles, GaO₂C₂ and GaN₂C₂.     

Synthetic access to optically active isoflavans by using allylic substitution

A general approach to the (S)- and (R)-isoflavans was invented, and efficiency of the method was demonstrated by the synthesis of (S)-equol ((S)-3), (R)-sativan ((R)-4), and (R)-vestitol ((R)-5). The key step is the allylic substitution of (S)-6a (Ar¹=2,4-(MeO)₂C₆H₃) and (R)-6b (Ar¹=2,4-(BnO)₂C₆H₃) with copper reagents derived from CuBr·Me₂S and Ar²-MgBr (7a, Ar²=4-MeOC₆H₄; 7b, 2,4-(MeO)₂C₆H₃; 7c, 2-MOMO-4-MeOC₆H₃), furnishing anti S_N2′ products (R)-8a and (S)-8b,c with 93-97% chirality transfer in 60-75% yields. The olefinic part of the products was oxidatively cleaved and the Me and Bn groups on the Ar¹ moieties was then removed. Finally, phenol bromide 9a and phenol alcohols 9b,c underwent cyclization with K₂CO₃ and the Mitsunobu reagent to afford (S)-3 and (R)-4 and -5, respectively.     

Transition metal alkylidene complexes. Pathways in their formation and tautomerization between bis-alkylidenes and alkyl alkylidynes

Studies from authors’ group (at the University of Tennessee) on alkylidene complexes and α-H migration in alkyl alkylidyne complexes, leading to unusual tautomerization equilibria between bis-alkylidenes and alkyl alkylidynes, are reviewed. Preparation of silyl alkylidene complexes (Me₃ECH₂)₂Ta(CHEMe₃)(SiR₃) [R₃ = (SiMe₃)₃, E = C, 3a, Si, 3b; R₃ = Bu^tPh₂, E = C, 4a, Si, 4b] and the pathway in the formation of 3b are discussed first. Pathways in the formation of archetypical Schrock-type alkyl alkylidenes (Me₃ECH₂)₃TaCHEMe₃ (E = C, 5a; Si, 5b), including the work using Ta(CD₂CMe₃)₅ (21-d₁₀) to confirm that it is the precursor to (Me₃CCD₂)₃TaCDCMe₃ (5a-d₇), are then considered. Tautomerization of silyl alkylidyne (Me₃CCH₂)₂W(CCMe₃)(SiBu^tPh₂) (6a) with bis-alkylidene (Me₃CCH₂)W(CHCMe₃)₂(SiBu^tPh₂) (6b) as well as (Me₃SiCH₂)₃W(CSiMe₃)(PR₃) [R₃ = Me₃, 7a; Me₂Ph, 8a; Me₂(CH₂)₂PMe₂ (DMPE-P), 9a] with (Me₃SiCH₂)₂W(CHSiMe₃)₂(PR₃) (R₃ = Me₃, 7b; Me₂Ph, 8b; DMPE-P, 9b) [P refers to a dangling P atom in Me₂P(CH₂)₂PMe₂] is covered next. Finally the conversion of the tungsten phosphine tautomerization mixtures to alkyl alkylidene alkylidyne (Me₃SiCH₂)W(CHSiMe₃)(CSiMe₃)(PR₃)₂ [(PR₃)₂ = (PMe₃)₂, 10; (PMe₂Ph)₂, 11; DMPE, 12], including its pathway, is presented.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Activation of C-H and C-Br bonds in cyclopalladation reactions of Schiff base ligands: Influence of the benzylidene ring substituents

Reaction of Pd(AcO)₂ with the Schiff base ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)N(Cy) (a) and 4,5-(OCH₂CH₂)C₆H₃C(H)N(Cy) (b) leads to the cyclometallated compounds [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(Cy)-C6,N}(μ-O₂CMe)]₂ (1a) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)N(Cy)-C6,N}(μ-O₂CMe)]₂ (1b), respectively, via C-H activation. Treatment of a with Pd₂(dba)₃ gave [Pd{4,5-(OCH₂O)C₆H₂C(H)N(Cy)-C2,N}(μ-Br)]₂ (6a), via C-Br activation. The metathesis reaction of 1a and 1b with aqueous sodium chloride gave the corresponding cyclopalladated dimers with bridging chloride ligands, 2a and 2b, respectively. Treatment of the halogen-bridged compounds with tertiary tri- and diphosphines in the appropriate molar ratio gave the mono and dinuclear compounds 3a-5a, 7a-9a and 3b-5b. The structure of compounds 3a, 4a, 5a, 8a, 2b, 3b and 5b has been determined by X-ray diffraction analysis.     

Synthesis and selective silylation of ω-hydroxy functionalized (η-alkenyl)carbene complexes of chromium(0) and tungsten(0) Part 11. The chemistry of metallacyclic alkenylcarbene complexes

Tungsten(0) carbene complexes of the type (OC)₅WC(NMeCH₂CHCHCH₂OH)R 2 (R=Me: 2a; R=Ph: 2b) were generated by aminolysis of (OC)₅WC(OMe)R with cis-NHMeCH₂CHCHCH₂OH. Like their Cr-congeners 1, complexes 2 exist at room temperature as mixtures of Z- and E-isomers with regard to the C-N bond. The metallacyclic complexes (OC)₄WC(η²-NMeCH₂CHCHCH₂OH)R (4) were obtained in good yields upon photo-decarbonylation of 2. Deprotonation/silylation of the complexes (OC)₄MC(η²-NMeCH₂CHCHCH₂OH)Me (M=Cr: 3a; M=W: 4a) with one equivalent of ⁿBuLi/Me₃SiCl gave (OC)₄MC(η²-NMeCH₂CHCHCH₂OSiMe₃)CH₃ (M=Cr: 5; M=W: 6), whereas with two equivalents of ⁿBuLi/Me₃SiCl complexes (OC)₄MC(η²-NMeCH₂CHCHCH₂OSiMe₃)CH₂SiMe₃ (M=Cr: 7; M=W: 8) were formed. Hydrolysis of the latter yielded selectively (OC)₄MC(η²-NMeCH₂CHCHCH₂OH)CH₂SiMe₃ (M=Cr: 9; M=W: 10). The complexes 1-10 were analyzed in solution by one- and two-dimensional NMR spectroscopy (¹H, ¹³C, ²⁹Si, ¹H/¹H COSY, ¹H/¹H NOESY, ¹³C/¹H HETCOR).