Facile syntheses of unsolvated UI3 and tetramethylcyclopentadienyl uranium halides

In the course of comparing the reaction chemistry of (C5Me5)3U, 1, and its slightly less crowded analogue (C5Me4H)3U, 2, new syntheses of UI3, (C5Me4H)3U, (C5Me4H)3UCl, 3, and (C5Me5)3UCl, 4, have been developed. Additionally, (C5Me4H)3UI, 5, and (C5Me4H)2UCl2, 6, have been identified for the first time. A facile synthesis of unsolvated UI3 is reported that proceeds in high yield with inexpensive equipment from iodine and hot uranium turnings. Both UI3 and UI3(THF)4 react with KC5Me4H in toluene to make unsolvated (C5Me4H)3U in higher yield than in previous reports that involve reduction of tetravalent (C5Me4H)3UCl, 3. A more atom-efficient synthesis of complex 3 is also reported that proceeds from reduction of t-BuCl, PhCl, or HgCl2 by 2. Similarly, (C5Me4H)3U reacts with PhI or HgI2 to generate (C5Me4H)3UI. These studies also provided a basis to improve the synthesis of (C5Me5)3UCl from 1 by employing t-BuCl or HgCl2 as the halide source. Like (C5Me5)3UCl, the (C5Me4H)3UCl complex reacts with HgCl2 to form (C5Me4H)2 and (C5Me4H)2UCl2, 6, but unlike (C5Me5)3UX (X = Cl or I), the less substituted (C5Me4H)3UX complexes do not reduce t-BuCl or PhX. The synthesis of 6 from (C5Me4H)MgCl x THF and UCl4 is also included.     

Phosphine-mediated dehalogenation reactions of trichloro(N-silyl)phosphoranimines

The reaction of N-(trimethylsilyl)phosphoranimine Cl3P=NSiMe3 (1) with nBu3P or Ph3P yields the N-(dichlorophosphino)phosphoranimines nBu3P=NPCl2 (4a) or Ph3P=NPCl2 (4b), respectively. Detailed studies of this reaction indicate a mechanism that involves the reductive dechlorination of 1 by the tertiary phosphine to yield nBu3PCl2 (5a) or Ph3PCl2 (5b) with the apparent formation of the transient chlorophosphinimine ClP=NSiMe3 (6), followed by condensation of 5a or 5b with 1 to form 4a or 4b and Me3SiCl. Convincing evidence for the proposed mechanism was revealed by studies of the analogous reaction between the N-(triphenylsilyl)phosphoranimine Cl3P=NSiPh3 (8) with nBu3P and Ph3P. These reactions quantitatively generated 5a and 5b and also allowed the correspondingly more stable chlorophosphinimine ClP=NSiPh3 (10) to be identified.     

C-F or C-H bond activation and C-C coupling reactions of fluorinated pyridines at rhodium: synthesis, structure and reactivity of a variety of tetrafluoropyridyl complexes

Reactions of [RhH(PEt3)3] (1) or [RhH(PEt3)4] (2) with pentafluoropyridine or 2,3,5,6-tetrafluoropyridine afford the activation product [Rh(4-C5NF4)(PEt3)3] (3). Treatment of 3 with CO, 13CO or CNtBu effects the formation of trans-[Rh(4-C5NF4)(CO)(PEt3)2] (4a), trans-[Rh(4-C5NF4)(13CO)(PEt3)2] (4b) and trans-[Rh(4-C5NF4)(CNtBu)(PEt3)2] (5). The rhodium(III) compounds trans-[RhI(CH3)(4-C5NF4)(PEt3)2] (6a) and trans-[RhI(13CH3)(4-C5NF4)(PEt3)2] (6b) are accessible on reaction of 3 with CH3I or 13CH3I. In the presence of CO or 13CO these complexes convert into trans-[RhI(CH3)(4-C5NF4)(CO)(PEt3)2] (7a), trans-[RhI(13CH3)(4-C5NF4)(CO)(PEt3)2] (7b) and trans-[RhI(13CH3)(4-C5NF4)(13CO)(PEt3)2] (7c). The trans arrangement of the carbonyl and methyl ligand in 7a-7c has been confirmed by the 13C-13C coupling constant in the 13C NMR spectrum of 7c. A reaction of 4a or 4b with CH3I or 13CH3I yields the acyl compounds trans-[RhI(COCH3)(4-C5NF4)(PEt3)2] (8a) and trans-[RhI(13CO13CH3)(4-C5NF4)(PEt3)2] (8b), respectively. Complex 8a slowly reacts with more CH3I to give [PEt3Me][Rh(I)2(COCH3)(4-C5NF4)(PEt3)](9). On heating a solution of 7a, the complex trans-[RhI(CO)(PEt3)2] (10) and the C-C coupled product 4-methyltetrafluoropyridine (11) have been obtained. Complex 8a also forms 10 at elevated temperatures in the presence of CO together with the new ketone 4-acetyltetrafluoropyridine (12). The structures of the complexes 3, 4a, 5, 6a, 8a and 9 have been determined by X-ray crystallography. 19F-1H HMQC NMR solution spectra of 6a and 8a reveal a close contact of the methyl groups in the phosphine to the methyl or acyl ligand bound at rhodium.     

Characterization of bleomycin cleavage sites in strongly bound hairpin DNAs

The first complete, systematic study of DNA degradation by bleomycin under conditions analogous to those likely in a therapeutic setting has been carried out. Hairpin DNAs selected for their ability to bind strongly to BLM A(5) were used to determine the relationship between high-affinity DNA binding sites and the cleavage efficiency and selectivity of BLM A(5) and deglycoBLM A(5) on these DNAs. Of the 10 hairpin DNAs examined, 8 contained at least one 5'-GC-3' or 5'-GT-3' cleavage site, which have traditionally been associated with strong cleavage by Fe·BLM. In the hairpin DNAs, these included the strongest cleavage sites for BLM A(5) and were generally among those for deglycoBLM A(5). However, numerous additional cleavages were noted, many at sequences not usually associated with (deglyco)BLM-mediated cleavage. The remaining DNAs lacked the preferred (5'-GC-3' or 5'-GT-3') BLM cleavage sequences; however, strong cleavage was nonetheless observed at a number of unusual cleavage sites. The most prominent cleavage sequences were 5'-AT-3', 5'-AA-3', 5'-GA-3', and 5'-TT-3'; treatment with Fe(II)·BLM A(5) or Fe(II)·deglycoBLM A(5) resulted in strong cleavage at these sequences. Additionally, in contrast with BLM A(5), which produced cleavage within the randomized and flanking invariant regions, deglycoBLM A(5) showed a preference for cleavage in the randomized region of the DNAs. Previous reports have established that deglycoBLM exhibits decreased DNA cleavage efficiency relative to BLM. This was also generally observed when comparing cleavage efficiencies for the strongly bound hairpin DNAs. However, some cleavage bands produced by Fe·deglycoBLM A(5) were stronger in intensity than those produced by BLM A(5) at concentrations optimal for both compounds. To investigate the chemistry of DNA degradation, selected hairpin DNAs were treated with n-butylamine following cleavage with Fe(II)·BLM A(5) or Fe(II)·deglycoBLM A(5) to explore the alkali labile pathway of DNA degradation by BLM. While all 10 DNAs showed evidence of alkali labile products, five DNA hairpins afforded some products formed solely via the alkali labile pathway.     

The cyclobutane dimers of 2'-deoxyuridine, 2'-deoxycytidine, 5-methyl-2'-deoxycytidine and 5-bromo-2'-deoxyuridine

Irradiation of DNA and RNA pyrimidine nucleosides with UV light in frozen aqueous solution or in solution with acetone often results in the formation of cyclobutane dimers (CBDs). Many of these photodimers have not been characterized. We present here the results of work designed to achieve the isolation, spectroscopic characterization and determination of the stereochemical nature of a number of little studied or previously unstudied CBDs of four 2'-deoxyribonuclesides. These nucleosides are 2'-deoxyuridine (dUrd), 2'-deoxycytidine (dCyd), 5-methyl-2'-deoxycytidine (5-MedCyd) and 5-bromo-2'-deoxyuridine (5-BrdUrd). In particular, we have isolated and characterized six dUrd CBDs, five dCyd CBDs, five 5-MedCyd CBDs and four 5-BrdUrd CBDs. Photoproducts were studied by UV spectroscopy, mass spectrometry, proton NMR spectroscopy and via chemical approaches. Also presented are results from less definitive studies of a number of (6-4) (or 5-4) photoadducts of these nucleosides. In addition, results from exploratory photochemical studies of other 2'-deoxyribonucleosides in frozen solution, as well as some mixtures of two nucleosides, are given. The latter results indicate that 5-iodo-2'-deoxyuridine (5-IdUrd), 5-bromo-2'-deoxycytidine and 5-iodo-2'-deoxycytidine each form putative CBDs and that 5-BrdUrd is capable of forming putative mixed CBDs and (6-4) and/or (5-4) adducts with thymidine (Thd); 5-IdUrd similarly forms a (6-4) (or (5-4)) adduct with Thd.     

Chemistry of biureas—I: Cyclisation of ethoxycarbonyl derivatives of thiobiureas and bithioureas

The interaction of ethoxycarbonyl isothiocyanate with semicarbazides or thiosemicarbazides produces 1-ethoxycarbonyl-2-thiobiureas or bithioureas, respectively. The former are cyclisable to 2-ethoxycarbonamido-5-hydroxy-l,3,4-thiadiazole in acid, or to 2(H)-carbamoyl-3-hydroxy-5-alkylthio-1,2,4-triazoles, and thence to 3-hydroxy-5-mercapto-1,2,4-triazole in alkaline media. The ring-closure of the 1-ethoxycarbonylbithioureas proceeds similarly affording, under the influence of acids, 5-amino (or mercapto)-2-ethoxycarbonamido-1,3,4-thiadiazoles. The action of alkali produces compounds derived from 3-hydroxy-5-mercapto-1,2,4-triazole; the isolation, in a selected example, of the 2(H)-phenylthiocarbamoyl-derivative, elucidates the course of this reaction. Hydrazinolysis of 1-ethoxycarbonylbithiourea yields 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole.     

Carbenerhodium complexes of the half-sandwich-type: synthesis, substitution, and addition reactions

A series of carbenerhodium(I) complexes of the general composition [(eta5-C5H5)Rh(=CRR')(L)] (2a-2i) with R = R'= aryl and L = SbiPr3 or PR3 has been prepared from the square-planar precursors trans-[RhCl(=CRR')(L)2] and NaC5H5 in excellent yields. Reaction of the triisopropylsibane derivative 2a. which contains a rather labile Rh-Sb bond, with CO, PMe3, and CNR (R = Me, CH2Ph, tBu) leads to the displacement of the SbiPr3 ligand and affords the substitution products [(eta5-C5H5)Rh(=CPh2)(L)] (3-7). In contrast, treatment of the triisopropylphosphane compound 2c with CO and CNtBu leads to the cleavage of the Rh=CPh2 bond and gives besides [(eta5-C5H5)Rh(PiPr3)(L)] (10, 12) by metal-assisted C-C coupling diphenylketene Ph2C=C=O (11) or the corresponding imine Ph2C=C=NtBu (13). While the reaction of 2a, c with C2H4 yields [(eta5-C5H5)Rh(C2H4)(L)] (14, 15) and the trisubstituted olefin Ph2C=CHCH3 (16), treatment of 2a, c with RN3 leads to the cleavage of both the Rh-EiPr3 and Rh=CPh2 bonds and gives the chelate complexes [(eta5-C5H5)Rh(kappa2-RNNNNR)] (19, 20). The substitution products 3 (L=CO) and 4 (L= PMe3) react with an equimolar amount of sulfur or selenium by addition of the chalcogen to the Rh=CPh2 bond to generate the complexes [(eta5-C5H5)Rh(kappa2-ECPh2)(L)] (21-24) with thio- or selenobenzophenone as ligand. Similarly, treatment of 3 with CuCl affords the unusual 1:2 adduct [(eta5-C5H5)(CO)Rh(mu-CPh2)(CuCl)2] (25), which reacts with NaC5H5 to form [(eta5-C5H5)(CO)Rh(muCPh2)Cu(eta5-C5H5)] (26). The molecular structures of 3 and 22 have been determined by X-ray crystallography.     

Water-soluble phosphines. 17.(1) novel water-soluble secondary and tertiary phosphines with disulfonated 1,1'-biphenyl backbones and dibenzophosphole moieties

Reaction of 2,2'-difluoro-1,1'-biphenyl with chlorosulfonic acid and subsequent hydrolysis followed by neutralization with potassium or sodium hydroxide affords disodium or dipotassium 5,5'-disulfonato-2,2'-difluoro-1,1'-biphenyl (1a, 1b). On treatment of 1b with diphenyl- or phenylphosphine in the superbasic medium DMSO/KOH, phosphine ligand 2 or 3 with a disulfonated 1,1'-biphenyl backbone or a dibenzophosphole moiety is formed. The structure of the oxide of 5-phenyldibenzophosphole 3, which crystallizes as 4.2.5H(2)O in the monoclinic space group P2(1)/n with a = 13.799(3) A, b = 19.246(4) A, c = 17.764(4) A, beta = 105.63(3) degrees, and Z = 4, has been determined by X-ray analysis. Nucleophilic phosphination of 1a with NaPH(2) in liquid ammonia yields the sodium phosphide 5a which on protonation gives the water-soluble 5H-dibenzophosphole 5. Reaction of 1b with PH(3) in the superbasic medium DMSO/KOtBu affords 5b in addition to the oxidation product 6a. On oxidation of 5a or 5b with H(2)O(2), the sodium or potassium salts of the sulfonated phosphinic acids 6a or 6b, respectively, are formed. Alkylation of the sodium dibenzophospholide 5a with 2,2'-bis(chloromethyl)-1,1'-biphenyl or 1,4-di-O-p-toluenesulfonyl-2,3-O-isopropylidene-D-threitol yields the chiral water-soluble bidentate phosphine ligands 8 and 9, respectively.     

Direct solvothermal synthesis of early transition metal nitrides

Solvothermal reactions of TaCl5 with LiNH2 in benzene result in nanocrystalline Ta3N5 at 500 or 550 degrees C. The approximately 25 nm Ta3N5 particles have a band gap of 2.08-2.10 eV. The same reactions in mesitylene resulted in a higher crystallization temperature and large amounts of carbon incorporation due to solvent decomposition. Reactions of Ta(NMe2)5 with LiNH2 under the same conditions resulted in TaN. Rocksalt-type MN phases are obtained for Zr, Hf, or Nb when their chlorides (ZrCl4, HfCl4, or NbCl5) or dialkylamides (M(NEtMe)4, M = Zr, Hf) are reacted with LiNH2 under similar conditions. With the amides, there is some evidence for nitrogen-rich compositions (HfN >1), and carbon is incorporated into the products through pyrolysis of the dialkylamide groups.     

Cu(II)-氨基酸-核苷酸三元配合物的合成和表征

合成和表征Na~2[Cu(L-Ala)~2(5'-GMP)].2H~2O、Na~2[Cu(L-Ala)~2(5'-IMP)].6H~2O、Na~2[Cu(L-His)(5'-GMP)Cl~2^2.2H~2O和Na~2[Cu(L-His)(5'-IMP)Cl~2].H~2O四个新的三元配合物, 其中两个L-Ala分子通过羧基O和α-氨基N与Cu(II)成反式配位, 一个L-His分子通过羧基O和咪唑环上的N与Cu(II)配位; 一个5'-GMP或5'-IMP分子嘌呤环上的N(7)与Cu(II)配位; 5'-GMP的磷酸根上可能存在强氢键, 而5'-IMP的磷酸根上不存在强氢键; 在含L-Ala三元配合物中, 5'-GMP的C(6)=0可能参与配位或形成强氢键, 而5'-IMP的C(6)=0不参与配位或形成配位或形成强氢键; 在含L-His三元配合物中, 5'-IMP的C(6)=0的表现则相反。     

Dipyrrolylquinoxaline-bridged Schiff bases: a new class of fluorescent sensors for mercury(II)

Novel 2,3-bis(1H-pyrrol-2-yl)quinoxaline-functionalized Schiff bases were prepared and characterized as new fluorescent sensors for mercury(II) ion. The X-ray crystal structures of compounds 4, 5, 4a and 5a were determined. The binding properties of 4 and 5 for cations were examined by UV-vis and fluorescence spectroscopy. The UV-vis and fluorescence data indicate that a 1 : 1 stoichiometric complex is formed between compound 4 (or 5) and mercury(II) ion, and the association constant is (3.81 +/- 0.7) x 10(5) M(-1) for 4 and (3.43 +/- 0.53) x 10(5) M(-1) for 5. The recognition mechanism between compound 4 (or 5) and metal ion was discussed based on their chemical construction and the fluorescence quenching effect when they interact with each other. Competition experiments revealed that compound 4 (or 5) has a highly selective response to mercury(II) ion in aqueous solution.     

Synthesis of N-cycloalkenylazoles

N-(1-Cycloalkenyl)pyrroles 3a,b, -pyrazoles 6a,b, and -imidazoles 9a,b were synthesized via elimination of benzotriazole or 5-phenyltetrazole from the corresponding 1-[1-(heterocycyl)cycloalkyl]benzotriazoles 2, 5, and 8 or 1-[1-(heterocycyl)cyclohexyl]-5-phenyltetrazole (12 and 14). Intermediates 2, 5, 8, 12 and 14 were obtained by cyclizations of dihaloalkanes with N-(benzotriazol-1-ylmethyl)heterocycles, 1-imidazol-1-ylmethyl-5-phenyltetrazole (11), or 1-pyrazol-1-ylmethyl-5-phenyltetrazole (13) in the presence of n-BuLi.     

Synthesis and characterization of Pd and Pt complexes of 1,3-bis(ferrocenylchalcogeno)propanes: crystal structures of FcSe(CH2)3SeFc and [M{FcE(CH2)3E'Fc}2](PF6)2 (M = Pd, Pt; E, E' = Se, Te; Fc = [Fe(eta5-C5H5)(eta5-C5H4)])

Reaction of a 1,3-bis(ferrocenylchalcogeno)propane, FcE(CH2)3E'Fc (L: E, E' = Se or Te; Fc = [Fe(eta5-C5H5)(eta5-C5H4)]), with a palladium(II) or platinum(II) precursor [M(NCMe)4](PF6)2 (M = Pd or Pt) in acetonitrile at room temperature led in good yield to the bis-chelate complexes [ML2](PF6)2. The structures of FcSe(CH2)3SeFc and all six complexes have been determined by X-ray crystallography. Electrochemical studies showed that electronic communication between ferrocenyl groups, absent in all three bis(ferrocenylchalcogeno)propanes, is established on complexation only for E = Se and E' = Se or Te, when the through-bond Fe...Fe distance is reduced to 13.17 A or less.     

Synthesis and spectral properties of polymethine-cyanine dye-nitroxide radical hybrid compounds for use as fluorescence probes to monitor reducing species and radicals

Various hybrid compounds comprised of two types of nitroxide radicals and either a pentamethine (Cy5) or trimethine cyanine (Cy3) were synthesized. The nitroxide radicals were linked either via an ester-bond to one or two N-alkyl carboxyl-terminated groups of Cy5, or via two amido-bonds (aminocarbonyl or carbonylamino group) to the 5-position of the indolenine moieties of Cy5 and Cy3. Changes in fluorescence and ESR intensities of the hybrid compounds were measured before and after addition of Na ascorbate in PBS (pH 7.0) to reduce the radicals. Among the hybrid compounds synthesized, those that linked the nitroxide radicals via an aminocarbonyl residue at the 5-position of the indolenine moieties on Cy5 and Cy3 exhibited a 1.8- and 5.1-fold increase in fluorescence intensity with the reduction of the nitroxide segment by the addition of Na ascorbate, respectively. In contrast, fluorescence intensity was not enhanced in the other hybrid compounds. Thus, the hybrid compounds which exhibited an increase in fluorescent intensity with radical reduction can be used in the quantitative measurement of reducing species such as Fe(2+) and ascorbic acid, and hydroxyl radicals. Because these hybrid compounds have the advantage of fluorescing at longer wavelengths-661 (Cy5) or 568 (Cy3)nm, respectively, they can be used to measure radical-reducing species or radicals either in solution or in vivo.     

Template synthesis of 1,4,7-triphosphacyclononanes

Iron(II) templates based on a [(eta(5)-Cp(R))Fe]+ core have been employed for the successful synthesis of 1,4,7-triphosphacyclononane derivatives (9-aneP3R'3) from a range of appropriately functionalized coordinated diphosphines and monophosphines. 1,2-Diphosphinoethane (1,2-dpe) or (2-phosphinoethyl)phenylphosphine (Phdpe) undergo a base-catalyzed Michael-type addition to trivinylphosphine, divinyl(benzyl)phosphine, or divinyl(phenyl)phosphine in [(eta(5)-Cp(R))Fe(diphosphine)(monophosphine)]+ complexes (2a-j) to give [(eta(5)-Cp(R))Fe(9aneP3R'3)]+ derivatives (4a-j) containing coordinated triphosphacyclononanes bearing one (with Phdpe) or two (with 1,2-dpe) secondary phosphine donors. The rates of macrocyclization show a dependence on the nature of the substituent(s) R on the cyclopentadienyl ligand with increased rates being observed along the series R = H5 < (Me3Si)H4 < 1,3-(Me3Si)2H3 approximately = Me5. For coupling reactions with trivinylphosphine, a pendant vinyl function remains in the macrocyclic product (4a-g) which is readily hydrogenated to the corresponding ethyl derivatives (5a-g). Further functionalization of coordinated secondary phosphines in the initially formed macrocycles (5a-g) is achieved by proton abstraction followed by addition of the appropriate alkyl halide electrophile and gives rise to tritertiary-triphospha-cyclononanes (7a-g, 7l, 7m). All new complexes have been fully characterized by spectroscopic and analytical methods in addition to the structural determination by single-crystal X-ray techniques of [{eta(5)-(Me3Si)2C5H3)Fe(9-aneP3H2C2H3)]PF6, 4c, and [(eta(5)-Me3SiC5H4)Fe(9-aneP3Et3)]BF4, 7b. 1,4,7-Triethyl-1,4,7-triphosphacyclononane is released from its metal template (7a, 7b) by treatment with either H2O2 or Br2/H2O to give the trioxide 9-aneP3(O)3Et3 (8). Attempts to recover the trivalent phosphorus species, 1,4,7-triethyl-1,4,7-triphosphacyclononane, from the trioxide by reduction proved unsuccessful.     

Partial halogenation of cyclic and branched perhydropentasilanes

The perhydropentasilanes (H(3)Si)(4)Si and Si(5)H(10) were chlorinated with SnCl(4) to give chlorohydropentasilanes without destruction of the Si-Si backbone. Tetrachloroneopentasilane (ClH(2)Si)(4)Si (2) was prepared in high yield from (H(3)Si)(4)Si and 3.5 equiv of SnCl(4), while Si(5)H(10) and an equimolar amount of SnCl(4) afforded a mixture of ～60% of ClSi(5)H(9) (1) with polychlorinated cyclopentasilanes and unreacted starting material, which could not be separated by distillation. The selective monochlorination of Si(5)H(10) was achieved starting from MesSi(5)Cl(9) (3; Mes = 2,4,6-trimethylphenyl) or TBDMP-Si(5)Cl(9) (4; TBDMP = 4-tert-butyl-2,6-dimethylphenyl). 3 or 4 was successfully hydrogenated with LiAlH(4) to give MesSi(5)H(9) (6) or TBDMP-Si(5)H(9) (7), which finally gave 1 along with aryl-H and Si(5)H(10) after treatment with an excess of liquid anhydrous HCl. All compounds were characterized by standard spectroscopic techniques. For Si-H derivatives, the coupled (29)Si NMR spectra were analyzed in detail to obtain an unequivocal structural assignment. The molecular structures of 2-4 were further confirmed by X-ray crystallography.     

The dichotomy of dimetallocenes: coaxial versus perpendicular dimetal units in sandwich compounds

Theoretical studies of the dimetallocene (eta5-C5H5)2Zn2 lead to optimized D5h or D5d structures in which the Zn-Zn bond is coaxial with the C5 axes of the two Cp rings, with a Zn-Zn distance of 2.33 A, corresponding to a Zn-Zn single bond. (eta5-C5H5)2Ni2 (singlet state) and (eta5-C5H5)2Cu2 (triplet) have similar structures with a NiNi triple bond (2.06 A) and a Cu=Cu double bond (2.22 A). However, DFT computations on (C5H5)2Ni2 and (C5H5)2Cu2 (both singlet states) lead to a totally different type of optimized structure (Ci symmetry) lying at significantly lower energies, with the metal-metal bonds perpendicular to the C5 axes of the Cp rings.     

Studies on Mechanisms and Blockade of Carcinogenic Action of Female Sex Hormones

Tumours of mice are induced by administration of Inj. Hydroxyprogesteroni Caproatis Co. (EP) in a practical subthreshold dose of carcinogenesis or 2. 5-5 times the human contraceptive dose (simply referred to as 2. 5- to 5-fold dose) combined with whole-body 0. 5 Gy gamma-ray irradiation. Malignant transformation of Syrian golden hamster embryo (SHE) cells is also induced by 5-fold dose of EP combined with 0. 3 Gy gamma-ray irradiation in vitro, thereby indicating that synergistic carcinogenesis can be obtained by combined use of physical and chemical carcinogens.The mechanisms of synergistic carcinogenesis have been further explained by cytogenetics, damage extent of the target cell DNA and production of free radicals. The Chinese traditional medicine with antioxidat-ing effect (Sulekang Capsule, SC), food additive--butylated hydroxyanisole (BHA) and green tea can effectively inhibit the carcinogenic effect of EP or EP combined with gamma rays in mice. They all have marked ability to scavenge or remove     

Reactivity of a palladium fluoro complex towards silanes and Bu3SnCH=CH2: Catalytic derivatisation of pentafluoropyridine based on carbon-fluorine bond activation reactions

The chloro and azido complexes trans-[PdCl(4-C5NF4)(PiPr3)2] (3) and trans-[Pd(N3)(4-C5NF4)(PiPr3)2] (4) can be prepared by reaction of [PdF(4-C5NF4)(PiPr3)2] (2) with Et3SiCl or MeSiN3, respectively. In contrast, reactions of 2 with Ph3SiH or Me2FSiSiFMe2 give the products of reductive elimination 2,3,5,6-tetrafluoropyridine (5) or 4-(fluorodimethylsilyl)tetrafluoropyridine (6) as well as [Pd(PiPr3)2] (1). In a catalytic experiment, pentafluoropyridine can be converted with Ph3SiH into 5 in 62% yield, when 10% of 2 is employed as catalyst. Treatment of trans-[PdF(4-C5NF4)(PiPr3)2] (2) with Bu3SnCH=CH2 in THF at 50 degrees C results in the formation of [Pd(PiPr3)2] (1) and 4-vinyltetrafluoropyridine (7). Complex 2 is also active as a catalyst towards a Stille cross-coupling reaction of pentafluoropyridine with Bu3SnCH=CH2 to give 4-vinyltetrafluoropyridine (7) with a TON of 6. The molecular structure of the complex 3 has been determined by X-ray crystallography.     

Studies of the synthesis and thermochemistry of coordinatively unsaturated chelate complexes (eta 5-C5Me5)IrL2 (L2 = TsNCH2CH2NTs, TsNCH2CO2, CO2CO2)

A comparative synthetic, structural, and thermochemical study on a series of chelate complexes containing the fragment (eta 5-C5Me5)Ir [(eta 5-C5Me5)Ir(TsNCH2CH2NTs) (1), (eta 5-C5Me5)Ir(TsNCH2CO2) (2), (eta 5-C5Me5)Ir(CO2CO2) (3)] was performed to clarify the roles of carboxylato and sulfonamido ligands. Whereas 1 and 2 are monomeric in solution and in the solid state, 3 appears to exist as an oligomer or polymer, (3)n, which can be broken up by addition of a ligand L such as a phosphine, CO, or 2-methoxypyridine to form (eta 5-C5Me5)Ir(L)(CO2CO2) (6). The synthesis of (3)n from [(eta 5-C5Me5)IrCl(mu-Cl)]2 required the use of silver oxalate in CH3CN, but if other solvents were used, the bridging oxalato complex (eta 5-C5Me5)IrCl(mu-eta 2-eta 2-C2O4)ClIr(eta 5-C5Me5) (7) was obtained and identified by X-ray diffraction. Enthalpies for reaction of THF-soluble monomers 1 and 2 with PMe3 were determined to be -28.7(0.5) and -28.5(0.4) kcal mol-1, respectively. The oligomerization behavior of 3 may be a result of reduced sigma- or pi-donation of carboxylato ligands compared to N-tosylamido ligands, because the values for nu CO in oxalato and bissulfonamido complexes 6-CO and (eta 5-C5Me5)Ir(CO)(TsNCH2CH2NTs) (4-CO) were 2064 and 2042 cm-1, respectively.