Nucleophilic vinylic substitutions on unactivated substrates. : The behaviour of styryl alkyl sulphides and selenides towards sulphur and selenium nucleophiles.

Sodium alkanethiolates or lithium methyl selenide react with styryl alkyl sulphides and selenides, in DMF at 100°C, to give the products of vinylic or aliphatic substitution. The two nucleophilic reagents are extremely selective. In the case of RSNa the attack at the vinylic carbon atom is much faster than that at the aliphatic carbon atom and the (Z)- or (E)- styryl alkyl sulphides are obtained as the result of a stereospecific vinylic substitution which occurs with retention of configuration. On the contrary, in the case of MeSeLi, under the same experimental conditions, the only reaction occurring is the aliphatic substitution which affords the vinyl thiolate anions, as an equilibrium mixture of the (E)- and (Z)- isomers, or the vinyl selenide anions which retain the configuration of the starting styryl alkyl selenides.     

Vinyl-lambda 3-iodanes act as efficient sulfur atom acceptors: vinylic SN2-based strategy for conversion of tertiary thioamides to amides

Exposure of tertiary thioamides to (E)-1-hexenyl(phenyl)-lambda 3-iodane results in vinylic SN2 reaction to give the inverted (Z)-S-vinylthioimidonium salts, which under alkaline hydrolysis (Na2CO3 or K2CO3) selectively afford amides, while (Z)-S-vinyl thioesters are obtained in high yields via the hydrolysis under acidic conditions (HCl).     

1H NMR spectroscopic criteria for the configuration of N-acyl-alpha,beta-dehydro-alpha-amino acid esters

The diagnostic values of the following three spectral criteria for the configuration of N-acyl-alpha,beta-dehydro-alpha-amino acid esters were examined: (i) the proton at the beta-position at the double bond of a Z-isomer is shielded if compared with the respective E-isomer (delta(beta)Z < delta(beta)E); (ii) the proton at the nitrogen atom is shielded in a Z-isomer in comparison with the corresponding E-isomer (delta(NH)Z < delta(NH)E); and (iii) changing of the solvent from CDCl3 to deuterated trifluoroacetic acid (TFA) causes shielding of the H(beta) vinylic proton of an E-isomer or deshielding of the respective proton of the Z-isomer (delta(CDCl3)E > delta(TFA)E or delta(CDCl3)Z < delta(TFA)Z). The investigations were based on a set of 22 (Z)- and (E)-N-acyl-alpha,beta-dehydro-alpha-amino acid esters of diverse structures, with aliphatic, aromatic and heteroaromatic substituents at the vinylic beta-carbon; most of the examined compounds were hitherto unknown. The application of the substituent effect additivity rule given by Pascual et al. for olefinic protons leads to evidently erroneous configuration assignments of N-acyl-alpha,beta-dehydro-alpha-amino acid esters. The considered criteria were fulfilled for all the examined cases with one exception [the second criterion for the alpha-pivaloylamino-beta-(2-furyl)acrylates]. The comparison of changes in the chemical shifts of H(beta) vinylic protons in CDCl3 and deuterated TFA seems to be the most reliable and useful configuration criterion, as it can be used in the case of a single isomer.     

Synthèse stéréosélective des sulfones vinyliques Z et E.

The condensation of α-sulphonyl carbanions with esters or with aldehydes (followed in this case by oxidation) gives β-ketosulphones. These were reduced stereoselectively into threo β-hydroxysulphones.Basic conditions have been found where the corresponding tosylates are converted into Z vinylic sulphones whereas the erythro tosylates lead to the E isomer. The corresponding acetoxy-sulphones erythro or threo, under different alkaline conditions are converted into the same E vinylic sulphone in a “convergent” manner.     

Sequential hydrocarbon functionalization: allylic C-H oxidation/vinylic C-H arylation

A Pd(II)/sulfoxide-catalyzed sequential allylic C-H oxidation/vinylic C-H arylation of alpha-olefins to furnish E-arylated allylic esters in high regio- and E:Z selectivities (>20:1) is reported. The broad scope of this method with respect to the alpha-olefin, carboxylic acid, and aryl boronic acid enables the rapid assembly of densely functionalized fragments for complex molecule synthesis from cheap, abundant hydrocarbon starting materials. The Pd(II)/sulfoxide-catalyzed vinylic C-H arylation of electronically unbiased olefins with aryl boronic acids proceeds under oxidative, acidic conditions and mild temperatures (room temperature to 45 degrees C).     

Stereoselective Syntheses of (E)-7, (Z)-9 Dodecadien-1-Yl Acetate

Two convenient synthetic methods for (E)-7, (Z)-9 dodecadien-1-yl acetate, via palladium-copper catalysed réactions of acetylenic intermediates with vinylic halides, are presented.     

Weakly nucleophilic conjugate bases of superacids as powerful nucleophiles in vinylic bimolecular nucleophilic substitutions of simple β-alkylvinyl(aryl)-λ3-bromanes

We report herein, for the first time, the stereoselective synthesis of simple (E)-β-alkylvinyl(aryl)-λ(3)-bromanes via a boron-λ(3)-bromane exchange reaction and their unique bimolecular nucleophilic substitutions at the vinylic ipso carbon atom under mild conditions. Interestingly, even weakly nucleophilic anions such as conjugate bases of superacids (HBF(4), TfOH, Tf(2)CH(2), Tf(3)CH, Tf(2)NH, etc.) function as nucleophiles toward the vinyl-λ(3)-bromanes. For instance, the vinylic S(N)2 reaction of (E)-vinyl-λ(3)-bromanes with potassium bis(triflyl)methanide stereoselectively produced (Z)-vinyloxy oxosulfonium ylides with exclusive inversion of configuration via oxygen attack, while that with potassium bis(triflyl)imide afforded predominantly (Z)-vinyloxysulfoximines. In marked contrast, (E)-β-alkylvinyl-λ(3)-iodanes do not undergo the vinylic S(N)2 reaction with these conjugate bases of superacids. The differences between the nucleofugalities of aryl-λ(3)-iodanyl and aryl-λ(3)-bromanyl groups (the latter being greater) probably play a pivotal role in these unique reactions.     

Diastereoselective Ni(0)-catalyzed carbocyclization to chiral vinylic sulfoxide

Diastereoselective Ni(0)-catalyzed carbocyclization of enone to chiral vinylic sulfoxide has been accomplished, wherein two stereogenic centers were constructed simultaneously to give cis- and trans-disubstituted cyclopentanes from (E)- and (Z)-vinylic sulfoxides, respectively.     

Stereoselective synthesis of (Z)-enethiols and their derivatives: vinylic S(N)2 reaction of (E)-alkenyl(phenyl)-lambda3-iodanes with thioamides

[reaction: see text]. Exposure of (E)-beta-alkylvinyl(phenyl)-lambda3-iodanes to thioamides in dichloromethane at room temperature was found to result in a bimolecular nucleophilic substitution (S(N)2) at the vinylic carbon atom to give inverted (Z)-enethiols and/or (Z)-S-vinylthioimidonium salts. Vinylic S(N)2 reactions with thioureas are also discussed.     

Rare example of nucleophilic substitution at vinylic carbon with inversion: mechanism of methyleneaziridine formation by sodium amide induced ring closure revisited

Intramolecular nucleophilic substitution of the C-Br bond of (E)- and (Z)-2-bromobut-2-enylamines by the pendant nitrogen atom leads to 2-ethyleneaziridines by way of stereochemical inversion at the vinylic carbon atom. The stereochemistry of the products is unambiguously established by X-ray crystallography performed on two derivatives. These cyclizations represent some of the first examples of substitution with inversion in unactivated vinylic substrates. In conjunction with additional deuterium-labeling experiments, the accepted mechanism for this reaction is shown to be flawed.     

Synthesis and reactions of (E)- and (Z)-1,3-dibromo-2-methoxypropene

(Z)-1,3-Dibromo-2-methoxypropene is prepared in 90% yield by dehydrohalogenation of 1,2,3-tribromo-2-methoxypropane with diisopropylamine in dichloromethane. The E-isomer can be obtained as the only product in almost quantitative yield by UV irradiation of the Z-isomer. Nucleophilic displacement reactions of the allylic bromide and palladium-catalyzed coupling reactions of the vinylic bromide in (E)- and (Z)-1,3-dibromo-2-methoxypropene have been studied.     

Syntheses a l'aide de sulfones (xxxvii): Synthese de trois pheromones a une double liaison z : z, 8-dda ; z, 9-dda ; z. 9-tda

The title compounds Z,8-dodecen-1yl acetate, Z,9-dodecen-1yl acetate and Z,9-tetradecen-1yl-acetate) have been synthesized in three efficient steps : the reaction mixture from metalated w-hydroxy sulfones and appropriate aldehydes was quenched with acetic anhydride yielding a diastereoisomeric mixture of β-acetoxy sulfones. Convergent elimination with powdered sodium hydroxide led to the E vinylic sulfone. Stereospecific hydrogenolysis of the sulfonyl group was carried out with sodium dithionite leading to the unsaturated alcohol (99% Z).     

Preparation of Bromoiodopropenoic Acids by Stereospecific Nucleophilic Substitution at Vinylic Carbon

The bromoiodopropenoic acids (E)‐2‐bromo‐3‐iodopropenoic acid 5 and (Z)‐2‐bromo‐3‐iodopropenoic acid 6 were prepared by stereospecific nucleophilic substitution of the corresponding vinylic bromides. The structure of the (Z)‐isomer was confirmed by X‐ray crystallography.     

Stereoselective Synthesis of（E）—and（Z）—1,2—Disubstituted Ethene from Polymer—Supported vinylic Selenide

This letter describes a method for the stereoselective synthesis of polymer-supported vinylic selenides and their applications to synthesis of(E)-and(Z)-1,2-disubstituted ethenes on solid-phase by the couplig reaction with Grignard reagents under the catalysis of NiCL2(PPh3)2.     

Silver technology for stabilization of simple (Z)-enethiols: stereoselective synthesis and reaction of silver (Z)-enethiolates

Reported here for the first time are the stereoselective synthesis and reaction of simple silver (Z)-enethiolates, which serve as stabilized (Z)-enethiol storage. In contrast to labile enethiols, silver (Z)-enethiolates are stable even in solutions, and their isolation and purification are very simple. The method for synthesis of silver (Z)-enethiolates involves an unusual vinylic SN2 reaction of (E)-vinyl-lambda3-iodanes with thiobenzamides yielding the inverted (Z)-S-vinylthioimidonium salts, followed by their regioselective C-S bond cleavage with silver acetate. Alkylation, arylation, and Michael addition of silver (Z)-enethiolates yielding (Z)-vinyl sulfides were dramatically accelerated by the addition of Bu4NI (LiI), which probably generates reactive ammonium (Z)-enethiolates with an increased nucleophilicity.     

Asymmetric intramolecular michael addition of alpha-sulfinyl vinylic carbanion to enoates

The first example of an asymmetric intramolecular Michael addition reaction with use of alpha-lithiated vinylic sulfoxide as a Michael donor is reported. Michael addition of the alpha-lithiated vinylic sulfoxide to (Z)-enoates proceeds with high diastereoselectivity to give the adducts with (R)-configuration at the beta-position of the ester in the five-membered-ring formation. The selectivity was reversed in the six-membered-ring formation. The resulting ester enolates were reacted with alkyl halides or benzaldehyde with high diastereoselectivity.     

A stereoselective route to alkenyl sulfides through the palladium-catalyzed cross-coupling reaction of 9-alkyl-BBN with 1-bromo-1-phenylthioethene or (E)- and (Z)-2-bromo-1-phenylthio-1-alkenes

The reaction of 9-alkyl-9-BBNs with 1-bromo-1-phenylthioethene or (E)- and (Z)-2-bromo-1-phenylthio-1-alkenes takes place readily in the presence of Pd(PPh₃)₄ and sodium hydroxide to afford stereodefined vinylic sulfides in excellent yields.     

Syntheses with organoboranes. XI. Allylboration Of vinylic epoxides with allylic dialkylboranes

Allylboration of representative vinylic epoxides with allyldiethylborane (1) and (2-cyclohexenyl)dicyclohexylborane (2) affords the corresponding 1,2- and 1,4-addition products. cis-1, 2-Addition is favored in the reaction of 1 with 3, 4-epoxycycloalkenes of six- to eight-membered rings. 3, 4-Epoxycyclopentene (3a) and 5,5-dimethyl-3,4-epoxycyclopentene (3b) undergo five-membered ring opening during allylboration with 1 and 2, producing the corresponding (Z)-trienols (4a and 4b) with high stereoselectivity. 1,4-Addition of 1 and 2 to monoepoxides of 1, 3-butadiene and isoprene is favored, producing predominantly the corresponding (E)-alcohols.     

(E)-1-alkyl-4-

(E)-1-Alkyl-4-[2-(alkylsulfonyl)-1-ethenyl]pyridinium salts were synthesized in two steps. These sulfones were stable at pH 7.3 and underwent a nucleophilic vinylic substitution (S(N)V) with mercaptans, including thiouracile, to give the corresponding 4-(thiovinyl)-pyridinium salts. The X-ray diffraction structure of (E)-1-methyl-4-[2-(ethylsulfanyl)-1-ethenyl]pyridinium iodide indicated conjugation of the sulfur with the pyridinium ring. (Z)-1-Methyl-4-[2-(methylsulfanyl)-1-ethenyl]pyridinium iodide, prepared from the corresponding thioether by reaction with methyl iodide in diethyl ether, underwent isomerization to the E isomer in a first-order reaction in deuterated [D6]DMSO with an activation energy of 14 kcalmol(-1). At pH 7, the (E)-1-methyl-4-[2-(methylsulfonyl)-1-ethenyl]pyridinium iodide (19) reacted specifically with thiols. The reaction of this sulfone with glutathione in a TES buffer at pH 7 was a second-order reaction (k = 4,100 M(-1)s(-1) at 30 degrees C) and gave the corresponding substitution product with an intense long wavelength absorption band (lambdamax=360 nm, epsilon = 27,500 M(-1)cm(-1)). The modification of different enzymes of known structure with 19 showed the high selectivity of this reagent towards thiol groups and its usefulness in the quantitative determination of free thiol groups in proteins.     

Indium(I) iodide promoted cleavage of diphenyl diselenide and disulfide and subsequent palladium(0)-catalyzed condensation with vinylic bromides. A simple one-pot synthesis of vinylic selenides and sulfides

[reaction: see text] Diphenyl diselenide (and disulfide) undergo facile reaction with indium(I) iodide and the corresponding intermediate complex condenses in situ with a variety of substituted vinyl bromides in the presence of a catalytic amount of tetrakis(triphenylphosphine)palladium(0) [Pd(PPh3)4] in THF at room temperature to produce vinylic selenides and sulfides in good yields. The conversion of (E)-vinyl bromides is remarkably stereoselective giving (E)-vinyl selenides (and sulpfides) whereas the stereoselectivity in reaction of (Z)-vinyl bromides is not very good.