On-Surface Driven Formal Michael Addition Produces m-Polyaniline Oligomers on Pt(111)

On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1,4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures.     

On-surface synthesis of porous graphene nanoribbons containing nonplanar [14]annulene pores

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14]annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.     

N-heterocyclic carbene enabled synthesis of conjugated polymers

The Suzuki polycondensation of a dihalogenated 4,5-diphenylimidazole (2) with a fluorenyl diboronic acid diester followed by methylation afforded a conjugated poly(imidazolium) copolymer (P2) in 93% yield. Upon exposure to strong base, P2 was converted in situ to the corresponding poly(N-heterocyclic carbene) P3, as evidenced by ¹H NMR spectroscopy and a trapping experiment involving sulfur that afforded the corresponding poly(thiourea) P4. Similarly, treating a solution of P2 with KOtBu and [Ir(1,5-cyclooctadiene)Cl]₂ afforded a conjugated polymer bearing pendant Ir complexes (P5) in 63% yield. Thermal and photophysical analyses of the aforementioned polymers revealed that they were thermally stable with tunable fluorescence properties, features which poise them for use in various electronic and sensing applications. The presented methodology is expected to facilitate the synthesis of a broad range conjugated organometallic polymers from a common and readily accessible precursor.     

Synthesis and characterization of perfluorinated arylenevinylene polymers

Fully fluorinated arylenevinylene polymers have been synthesized via a methodology based on the Stille cross‐coupling reaction and characterized by FTIR spectroscopy and MALDI‐TOF mass spectrometry. Investigation of thin film properties by cyclic voltammetry and ellipsometry shows that complete substitution of hydrogen atoms with fluorine atoms on the conjugated backbone of the poly(arylenevinylene)s results in a strong increase of the band gap. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 285–291, 2010     

Synthesis and characterization of low bandgap copolymers based on indenofluorene and thiophene derivative

A series of low band gap, highly soluble alternating conjugated copolymers, comprised of 11,11,12,12‐tetrahexylindenofluorene and thiophene derivatives ( P1‐P4 ), were synthesized via Pd‐catalyzed Suzuki coupling reaction with very good yields. Described here are the synthesis, thermal, optical, and electrochemical properties of these new copolymers as potential new active materials for electronic and optoelectronic device applications. P1 and P2 have electron donating non‐π‐substituents with ethylenedioxy and propylenedioxy bridging the 3,3 positions of the cyclopentadithiophene groups; whereas P3 and P4 have electron withdrawing π‐substituents (carbonyl and pyrazine groups on P3 and P4 , respectively). For the main absorptions in UV‐vis spectrum, P1 and P2 displayed more red absorptions in comparison with P3 and P4 . Nevertheless, much suppressed quantum yields are exhibited by P3 and P4 . The behaviors of P3 can be attributed to the significant charge transfer interactions between the π‐substituents and the conjugated polymer backbone that leads to a less allowed optical transition between the ground and the lowest excited state. For P4 , the weak fluoresence might associate with energy transfer from indenofluorene to the low band gap thiophene‐pyrazinethiophene‐thiophene (T‐PT‐T) unit. In comparison with the corresponding polymers containing fluorene instead of indenofluorene, the use of indenofluorene exhibited mixed effects on the optical properties and improved solubility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5044–5056, 2009     

Ionic liquids in the synthesis and modification of polymers

Ionic liquids are organic salts that are liquid at ambient temperatures, preferably at room temperature. They are nonvolatile, thermally and chemically stable, highly polar liquids that dissolve many organic, inorganic, and metallo‐organic compounds. Many combinations of organic cations with different counterions are already known, and the properties of ionic liquids may be adjusted by the proper selection of the cation and counterion. In the last decade, there has been increasing interest in using ionic liquids as solvents for chemical reactions. The interest is stimulated not only by their nonvolatility (green solvents) but also by their special properties, which often affect the course of a reaction. In recent years, ionic liquids have also attracted the attention of polymer chemists. Although the research on using ionic liquids in polymer systems is still in its infancy, several interesting possibilities have already emerged. Ionic liquids are used as solvents for polymerization processes, and in several systems they indeed show some advantages. In radical polymerization, the k_p/k_t ratio (where k_p is the rate constant of propagation and k_t is the rate constant of termination) is higher than in organic media, and thus better control of the process can be achieved. Ionic liquids, as electrolytes, have also attracted the attention of researchers in the fields of electrochemical polymerization and the synthesis of conducting polymers. Finally, the blending of ionic liquids with polymers may lead to the development of new materials (ionic liquids may act as plasticizers, electrolytes dispersed in polymer matrices, or even porogens). In this article, the new developments in these fields are briefly discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4675–4683, 2005     

Chemoenzymatic synthesis of glycoconjugate polymers starting from nonreducing disaccharides

Here we report the chemoenzymatic synthesis and recognition function of glycoconjugate polymers carrying nonreducing disaccharides [α-D -glucopyranosyl-(1-1)-α-D -glucopyranoside (trehalose) and α-D -galactopyranosyl-(1-1)-α-D -glucopyranoside (Gal-type trehalose)]. The lipase-catalyzed esterification of the disaccharides with divinyl sebacate is completely selective at the primary Glc 6-OH position of trehalose and at the Gal 6-OH position of Gal-type trehalose. The resultant vinyl esters can be polymerized to yield glycoconjugate polymers with poly(vinyl alcohol) backbones. The interactions of the glycoconjugate polymers with lectins (concanavalin A and Bandeiraera simplicifolia) are amplified because of the glycocluster effect. The polymer carrying pendant α-D -galactopyranosyl-(1-1)-α-D -glucopyranoside shows inhibition activity against Shiga toxin-1 based on a stereochemical structure similar to that of globosyl Gb2 disaccharide. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4598–4606, 2004     

Photophysical characterization of light-emitting poly(indenofluorene)s.

Time-resolved photoluminescence spectroscopy experiments of three poly(2,8-indenofluorene) derivatives bearing different pendant groups are presented. A comparison of the photophysical properties of dilute solutions and thin films provides information on the chemical purity of the materials. The photophysical properties of poly(2,8-indenofluorene)s are correlated with the morphological characteristics of their corresponding films. Wide-angle X-ray scattering experiments reveal the order in these materials at the molecular level. The spectroscopic results confirm the positive impact of a new synthetic approach on the spectral purity of the poly(indenofluorene)s. It is concluded that complete side-chain substitution of the bridgehead carbon atoms C-6 and C-12 in the indenofluorene unit, prior to indenofluorene ring formation, reduces the probability of keto formation. Due to the intrinsic chemical purity of the arylated derivative, identification of a long-delayed spectral feature, other than the known keto band, is possible in the case of thin films. Controlled doping experiments on the arylated derivative with trace amounts of an indenofluorene-monoketone provide quantitative information on the rates of two major photophysical processes, namely, singlet photoluminescence emission and singlet photoluminescence quenching. These results allow the determination of the minimum keto concentration that can affect the intrinsic photophysical properties of this polymer. The data suggest that photoluminescence quenching operates in the doped films according to the Stern-Volmer formalism.     

Barium coordination polymers based on fluorinated and fluorine-free benzene-dicarboxylates: Mechanochemical synthesis and spectroscopic characterization

A series of new Ba-based coordination polymers (CPs) were mechanochemically synthesized by milling Ba-hydroxide samples with perfluorinated and fluorine-free benzene-dicarboxylic acids, including tetrafluoroisophthalic acid (H₂mBDC-F₄), tetrafluorophthalic acid (H₂oBDC-F₄), isophthalic acid (H₂mBDC) and phthalic acid (H₂oBDC). The new fluorinated CPs: [Ba(mBDC-F₄)·0.5H₂O] (1) and [Ba(oBDC-F₄)·1.5H₂O] (2) are compared to their nonfluorinated counterparts: [Ba(mBDC)·2.5H₂O] (3), and [Ba(oBDC)·1H₂O] (4). These materials are thoroughly characterized using powder X-ray diffraction. The products obtained by milling are all hydrated but vary in their water contents. Compositions and local structures are investigated by elemental analysis, thermal analysis, MAS NMR and attenuated total reflection-infrared spectroscopy. These materials exhibit high thermal stabilities but small surface areas that remain unchanged even after thermal treatments.     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

Synthesis and characterization of new cholesteric monomers and smectic polymers containing menthyl groups

New cholesteric monomers (M₂−M₅) and the corresponding smectic homopolymers (P₂−P₅) based on menthyl groups were synthesized. The chemical structures were characterized by Fourier transform infrared and ¹H NMR. The specific optical rotations were evaluated with a polarimeter. The structure–property relationships of the new compounds are discussed. The mesomorphism was investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The selective reflection property of light was studied with UV/Visible/NIR. The monomers M₂−M₅ formed the cholesteric or blue phase when a flexible link chain was inserted between the mesogenic core and the terminal menthyl groups by reducing the steric effect. M₁ showed no mesomorphism, while M₂−M₅ revealed enantiotropic cholesteric phase. In addition, M₂ and M₃ also showed a cubic blue phase on cooling. The selective reflection of light for M₂−M₅ shifted to the short reciprocal wavelength region with increasing the temperature or intramolecular spacer length. P₂−P₅ exhibited the smectic A phase. The melting, clearing, and glass transition temperatures increased when increasing the aryl number in the mesogenic core or decreasing the intramolecular spacer length.     

Side-chain cholesteric liquid crystalline polymers containing menthol and cholesterol—synthesis and characterization

A series of new cholesteric side-chain liquid crystalline polymers were prepared containing cholesteric monomer and nonmesogenic chiral monomer. All polymers were synthesized by graft polymerization using polymethylhydrosiloxane as backbone. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction measurements, and temperature-changing solidistic optical rotation. The chemical structures of the monomers and polymers obtained were confirmed by Fourier transform infrared and proton nuclear magnetic resonance spectra. M₁ showed cholesteric phase during the heating and the cooling cycle. Polymer P₁ were chiral smectic A phase, whereas P₂–P₇ were cholesteric phase. Experimental results demonstrated that nonmesogetic chiral moity offered the possibility of application because of its lower glass-transition temperature, and the glass-transition temperatures and isotropization temperatures reduced, and the ranges of the mesophase temperature changed abruptly at first and then smoothly with increasing the content of chiral agent.     

Side-chain liquid crystalline polymers: The synthesis and characterization of poly[4-nitrothiophenyl-4-(ω-methacryloyl oxyalkyloxy)] benzoate

A new series of sulfur-containing side-chain liquid crystalline polymer is described. Mesomorphic side chains with methylene spacers of different lengths have been synthesized, and their structures were identified by nuclear magnetic resonance, infrared and mass spectrometry. The liquid crystalline nature of the polymers was characterized by microscopy and differential scanning calorimetry.     

Hydrothermal synthesis and crystal structure of two new lanthanide coordination polymers with 1,2-phenylenediacetate

Two new compounds {[Ln₂(1,2-pda)₃(H₂O)₂]·?2H₂O} _n (1,2-H₂pda?=?1,2-phenylenediacetic acid, Ln?=?Tb, 1; Ho, 2) were prepared by hydrothermal reaction and characterized by X-ray crystallography. The Ln³⁺ is nine-coordinate by eight oxygen atoms of six 1,2-pda ligands and one oxygen of water. Ln³⁺ ions are bridged by 1,2-pda ligands via bridging/chelating-bridging pentadentate and chelating-bridging/chelating-bridging hexadentate coordination to form 3-D framework structures. Complex 1 emits strong green fluorescence corresponding to ⁵D₄???⁷F_j (j?=?6–3) transitions of the Tb³⁺.     

Novel water-soluble quaternary piperazine derivatives of chitosan: synthesis and characterization

Novel synthesis methods for the preparation of quaternary piperazine derivatives of chitosan were developed. Quaternary ammonium moiety can be selectively inserted into either one or both of the piperazine nitrogens, yielding structurally uniform chitosan derivative structures. Water-soluble end products were thoroughly characterized with FT-IR, 1H NMR, 13C NMR and 2D 1H-13C HSQC NMR. The molecular weights of the end products were determined by GPC with triple detection.     

Designed synthesis of Co salen‐based metalated crystalline polymers

In this contribution, we for the first time propose the targeted synthesis of Co‐metalated salen‐based crystalline polymer, starting from corner and square building units in the presence of cobalt metal ions. On the basis of structural characterizations, this kind of salen‐based crystalline polymer is proved to be the long hollow tube. Due to its covalent connected unique structure, the obtained Co‐salen polymer possesses high crystallinity and excellent stability. The experimental and theoretical studies show that this kind of material holds paramagnetism, unique electronic structure, and remarkable catalytic activity with high selectivity for the coupling of CO₂ and epoxides to form cyclic carbonates. And specifically, it shows favorable recyclability with only a slight drop in yield after six catalytic cycles. We hope that the results reported here will greatly inspire the design and synthesis of different metalated salen‐based polymer and enlarge their interesting applications in the future. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 641–647     

Some aspects of the synthesis and characterization of special polymers and oligomers by olefin metathesis

Homopolymers of 2-norbornene and 2,3-bis(trifluoromethyl)-2,5-norbornadiene and copolymers of these bicyclic olefins with 1,5-cyclooctadiene and cyclopentene were prepared via ring opening metathesis polymerization. The molecular weight distributions of the polymers were estimated by gel permeation chromatography.The polymers were degraded in a cross metathesis reaction with E-4-octene; only poly[2,3-bis(trifluoromethyl)-2,5-norbornadiene] was not degradable.All reactions were carried out with WCl₆/(CH₃)₄Sn as the catalyst system. The low molecular cyclic oligomers in the polymerization mixtures and the degradation products were analyzed by gas chromatography and identified using a gas chromatography/mass spectrometry coupling.The degradation experiments show reactivity differences for the double bonds situated in the polymer backbone. On the basis of these differences and the fact that this is the first time that a metathesis degradation of such polymers has been reported, the consequences on the ring opening metathesis copolymerization of cycloolefins are discussed in general terms, leading to some new aspects in the planning of the synthesis of special copolymers and oligomers.With reference to a lecture presented at the 4th International Symposium on Olefin Metathesis (ISOM 4), Belfast, 1–4 Sept. 1981.     

Synthesis and characterization of electrophosphorescent jacketed conjugated polymers

A monomer containing bent side chains with oxadiazole unit was synthesized. And it was copolymerized with polyfluorene at different ratios. The photophysical and electrochemical properties of the copolymers were characterized. The results show that the introduction of the oxidiazole‐containing side chains into the polymer reduces the lowest unoccupied molecular orbital level. And the steric hindrance of the side groups can effectively suppress the aggregation of the polymer backbones. Electroluminescent devices were fabricated with a configuration of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene (PEDOT):PSS/Sample/Ca/Al. All of the devices emit blue light. The device of the copolymer PFOXD50 shows the best performance with the maximum luminance of 1033 cd/m² and the maximum current efficiency of 0.29 cd/A. Then a cyclometalated iridium complex monomer (ppy)₂Ir(BrPhPyBr) was copolymerized with PFOXD50 at different ratios. The devices with the same configuration emit orange light. The efficiency generally increases with the increasing Ir content. Among them, the device of the copolymer PFOXDIr7 shows the best performance with the maximum luminance of 846 cd/m² and the maximum current efficiency of 0.61 cd/A. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

L-酪氨酸印迹分子的制备及性能研究

利用分子印迹技术采用传统加热法制备出酪氨酸他子印迹聚合物。用红外光谱分析了聚合物结构。研究了印迹他子与功能单体的物质的量对聚合物结合性的影响,吸收效率表征结果显示,与化学组成相同的空白聚合物相比,印迹聚合物具有更高的吸附效率。     

Synthesis and characterization of azobenzene-containing side-chain photorefractive polymers

The synthesis and characterization of some new high-T_g photorefractive polymers, polyphosphazene P3-P8, were described. They were obtained via a post-azo coupling reaction. The resulting materials have been characterized by means of ¹H NMR, ³¹P NMR, FT-IR, UV-vis, GPC and DSC. Chromophore contents up to 14 mol% have been realized. The polymers had high glass transition temperatures and good optical transparency. Measurements reveal that they possess relatively large magnitude of photoinduced birefringence.