Determination of cationic mobilities and pKa values of 22 amino acids by capillary zone electrophoresis

The effective mobilities of the cationic forms of common amino acids--mostly proteinogenic--were determined by capillary zone electrophoresis in acidic background electrolytes at pH between 2.0 and 3.2. The underivatized amino acids were detected by the double contactless conductivity detector. Experimentally measured effective mobilities were fitted with the suitable regression functions in dependence on pH of the background electrolyte. The parameters of the given regression function corresponded to the values of the actual mobilities and the mixed dissociation constants (combining activities and concentrations) of the compound related to the actual ionic strength. McInnes approximation and Onsager theory were used to obtain thermodynamic dissociation constants (pK(a)) and limiting (absolute) ionic mobilities.     

Investigation of the effect of ionic strength of Tris-acetate background electrolyte on electrophoretic mobilities of mono-, di-, and trivalent organic anions by capillary electrophoresis

The effect of ionic strength of the background electrolyte (BGE) composed of tris(hydroxymethyl)aminomethane (Tris) and acetic acid on the electrophoretic mobility of mono-, di- and trivalent anions of aliphatic and aromatic carboxylic and sulfonic acids was investigated by capillary zone electrophoresis (CZE). Actual ionic mobilities of the above anions were determined from their CZE separations in Tris-acetate BGEs of pH 8.1 to 8.2 in the 3 to 100 mM ionic strength interval at constant temperature (25 degrees C). It was found that the ionic strength dependence of experimentally determined actual ionic mobilities does not follow the course supposed by the classical Onsager theory. A steeper decrease of actual ionic mobilities with the increasing ionic strength of BGE and a higher estimated limiting mobility of the anions than that found in the literature could be attributed to the specific behavior of the Tris-acetate BGEs. Presumably, not only a single type of interaction of anionic analytes with BGE constituents but rather the combination of effects, such as ion association or complexation equilibria, seems to be responsible for the observed deviation of the concentration dependence of the actual ionic mobilities from the Onsager theory. Additionally, several methods for the determination of limiting ionic mobilities from CZE measured actual ionic mobilities were evaluated. It turned out that the determined limiting ionic mobilities significantly depend on the calculation procedure used.     

直接进样超高效液相色谱-三重四极杆质谱法快速测定环境水样中草甘膦、氨甲基膦酸、草铵膦及乙烯利残留

建立了一种简便、直接进样的超高效液相色谱-三重四极杆质谱法（UPLC-MS/MS）快速测定环境水样中草甘膦、氨甲基膦酸、草铵膦及乙烯利的残留。环境水样经0.22 μm滤膜过滤或冷冻离心去除杂质后,滤液无需衍生化直接进行定量分析。4种农药通过Metrosep A Supp 5柱（150 mm×4.0 mm,5 μm）分离,以碳酸氢铵-氨水溶液为流动相进行梯度洗脱,在负离子模式下以MRM方式进行检测。结果表明,4种农药在0.50~50.0 μg/L范围内相关系数（r）均大于0.999,线性关系良好,方法检出限为0.05~0.09 μg/L。实际水样在低、中、高3种加标浓度水平下,回收率分别为76.3%~108%、83.0%~107%和87.0%~105%,相对标准偏差分别为2.0%~12.3%、2.4%~5.6%和2.7%~6.8%。使用该方法对海南省34个水样进行测定,其中30个饮用水源地水样中均未检出4种农药,槟榔园附近3个水样均检出草甘膦和氨甲基膦酸,香蕉园附近的1个水样检出草铵膦和氨甲基膦酸。与传统的衍生化方法比较,该方法操作简便,重现性好,准确性高,不受基体干扰,适用于环境水样中草甘膦、氨甲基膦酸、草铵膦及乙烯利的残留检测。     

Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Electrophoretic mobility measurements of fluorescent dyes using on-chip capillary electrophoresis

We present an experimental study of the effect of pH, ionic strength, and concentrations of the electroosmotic flow (EOF)-suppressing polymer polyvinylpyrrolidone (PVP) on the electrophoretic mobilities of commonly used fluorescent dyes (fluorescein, Rhodamine 6G, and Alexa Fluor 488). We performed on-chip capillary zone electrophoresis experiments to directly quantify the effective electrophoretic mobility. We use Rhodamine B as a fluorescent neutral marker (to quantify EOF) and CCD detection. We also report relevant acid dissociation constants and analyte diffusivities based on our absolute estimate (as per Nernst-Einstein diffusion). We perform well-controlled experiments in a pH range of 3-11 and ionic strengths ranging from 30 to 90 mM. We account for the influence of ionic strength on the electrophoretic transport of sample analytes through the Onsager and Fuoss theory extended for finite radii ions to obtain the absolute mobility of the fluorophores. Lastly, we briefly explore the effect of PVP on adsorption-desorption dynamics of all three analytes, with particular attention to cationic R6G.     

Determination of thermodynamic pKa values of pharmaceuticals from five different groups using capillary electrophoresis

A determination of the thermodynamic acid dissociation constants (pK_a) of 22 frequently used pharmaceuticals using capillary electrophoresis in aqueous media is presented in this work. The investigated pharmaceuticals belong to different pharmacological groups: macrolides, fluoroquinolones, sulfonamides, β‐lactams, tetracyclines, and other miscellaneous pharmaceuticals. The electrophoretic mobilities of the investigated analytes were monitored in a pH range from 2.00 to 10.82. The data were fitted with an appropriate mathematical model using a nonlinear regression analysis to obtain pK_a values. Experimentally obtained data were well described by the mathematical model chosen for each analyte that was confirmed by r² values higher than 0.99 for most of the investigated analytes. Extrapolations to zero ionic strength were used to determine the thermodynamic pK_a values. Experimentally obtained acid dissociation constants were interpreted using structural formulae of investigated analytes and the moieties corresponding to specific pK_a were identified.     

Determination of acidity constants,ionic mobilities,and hydrodynamic radii of carborane-based inhibitors of carbonic anhydrases by capillary electrophoresis

Capillary electrophoresis (CE) has been applied for determination of the thermodynamic acidity constants (pK_a) of the sulfamidoalkyl and sulfonamidoalkyl groups, the actual and limiting ionic mobilities and hydrodynamic radii of important compounds, eight carborane-based inhibitors of carbonic anhydrases, which are potential new anticancer drugs. Two types of carboranes were investigated, (i) icosahedral cobalt bis(dicarbollide)(1-) ion with sulfamidoalkyl moieties, and (ii) 7,8-nido-dicarbaundecaborate with sulfonamidoalkyl side chains. First, the mixed acidity constants, pK_a^mix, of the sulfamidoalkyl and sulfonamidoalkyl groups of the above carboranes and their actual ionic mobilities were determined by nonlinear regression analysis of the pH dependences of their effective electrophoretic mobility measured by capillary electrophoresis in the pH range 8.00−12.25, at constant ionic strength (25 mM), and constant temperature (25°C). Second, the pK_a^mix were recalculated to the thermodynamic pK_as using the Debye–Hückel theory. The sulfamidoalkyl and sulfonamidoalkyl groups were found to be very weakly acidic with the pK_as in the range 10.78−11.45 depending on the type of carborane cluster and on the position and length of the alkyl chain on the carborane scaffold. These pK_as were in a good agreement with the pK_as (10.67−11.27) obtained by new program AnglerFish (freeware at https://echmet.natur.cuni.cz ), which provides thermodynamic pK_as and limiting ionic mobilities directly from the raw CE data. The absolute values of the limiting ionic mobilities of univalent and divalent carborane anions were in the range 18.3−27.8 TU (Tiselius unit, 1 × 10⁻⁹ m²/Vs), and 36.4−45.9 TU, respectively. The Stokes hydrodynamic radii of univalent and divalent carborane anions varied in the range 0.34−0.52 and 0.42−0.52 nm, respectively.     

Determination of thermodynamic acidity constants and limiting ionic mobilities of weak electrolytes by capillary electrophoresis using a new free software AnglerFish

Thermodynamic acidity constants (acid or acid-base dissociation constants, sometimes called also as ionization constants) and limiting ionic mobilities (both of them at defined temperature, usually 25°C) are the fundamental physicochemical characteristics of a weak electrolyte, that is, weak acid or weak base or ampholyte. We introduce a novel method for determining the data of a weak electrolyte by the nonlinear regression of effective electrophoretic mobility versus buffer composition dependence when measured in a set of BGEs with various pH. To correct the experimental data for zero ionic strength we use the extended Debye-Hückel model and Onsager-Fuoss law with no simplifications. Contrary to contemporary approaches, the nonlinear regression is performed on limiting mobility data calculated by PeakMaster's correction engine, not on the raw experimental mobility data. Therefore, there is no requirement to perform all measurements at a constant ionic strength of the set of BGEs. We devised the computer program AnglerFish that performs the necessary calculations in a user-friendly fashion. All thermodynamic pKa values and limiting electrophoretic mobilities for arbitrarily charged substances having any number of ionic forms are calculated by one fit. The user input consists of the buffer composition of the set of BGEs and experimentally measured effective mobilities of the inspected weak electrolyte.     

Determination of ζ‐potential,charge, and number of organic ligands on the surface of water soluble quantum dots by capillary electrophoresis

The number of charges and/or organic ligands covalently attached to the surface of CdTe quantum dot nanoparticles has been determined from their electrophoretic mobilities measured in capillaries filled with free electrolyte buffers. Three sizes of water soluble CdTe quantum dots with 3‐mercaptopropionic and thioglycolic acids as surface ligands were prepared. Their electrophoretic mobilities in different pH and ionic strength values of separation buffers were measured by capillary electrophoresis with laser induced fluorescence detection. The ζ‐potentials determined from electrophoretic mobilities using analytical solution of Henry function proposed by Ohshima were in the range from ?30 to ?100 mV. Charges of QDs were calculated from ζ‐potentials. As a result, numbers of organic ligands bonded to QDs surface were determined to be 13, 14, and 15 for the sizes of 3.1, 3.5, and 3.9 nm, respectively. The dissociation constants of organic ligands bonded on QDs surfaces estimated from the dependence of QDs charge on pH of the separation buffer were 7.8 and 7.9 for 3‐mercaptopropionic acid and 6.9 for thioglycolic acid.     

Physicochemical characterization of phosphinic pseudopeptides by capillary zone electrophoresis in highly acidic background electrolytes

Phosphinic pseudopeptides (i.e., peptide isosteres with one peptide bond replaced by a phosphinic acid moiety) were analyzed and physicochemically characterized by capillary zone electrophoresis in the pH range of 1.1-3.2, employing phosphoric, phosphinic, oxalic and dichloroacetic acids as background electrolyte (BGE) constituents. The acid dissociation constant (pK(a)) of phosphinate group in phosphinic pseudopeptides and ionic mobilities of these analytes were determined from the pH dependence of their effective electrophoretic mobilities corrected to standard temperature and constant ionic strength of the BGEs. It was shown that these corrections are necessary whenever precise mobility data at very low pH are to be determined. Additionally, it was found that the ionic mobilities of the phosphinic pseudopeptides and pK(a) of their phosphinate group are affected by the BGE constituent used. The variability of migration behavior of the pseudopeptides can be attributed to their ion-pairing formation with the BGE components.     

Optimization of background electrolytes for capillary electrophoresis: II. Computer simulation and comparison with experiments

A mathematical and computational model described in the previous paper (Gas, B., Coufal, P., Jaros, M., Muzikár, J., Jelínek, L., J. Chromatogr. A 2001, 905, 269-279) is adapted, algorithmized, and a computer program PeakMaster having a status of freeware (http://natur.cuni.cz/ approximately gas) is introduced. The model enables optimization of background electrolyte (BGE) systems for capillary zone electrophoresis. The model allows putting to use uni- or di- or trivalent electrolytes and allows also for modeling highly acidic or alkaline BGEs. It takes into account the dependence of ionic mobilities and dissociation of weak electrolytes on the ionic strength. The model calculates the effective mobility of analytes and predicts parameters of the system that are experimentally available, such as the transfer ratio, which is a measure of the sensitivity in the indirect UV detection or the molar conductivity detection response, which expresses the sensitivity of the conductivity detection. Further, the model enables evaluation of a tendency of the analyte to undergo electromigration dispersion or peak broadening. The suitability of the model is verified by comparison of the predicted results with experiments, even under conditions that are far from ideal (under extreme pH and a high ionic strength).     

Automated trace level determination of glyphosate and aminomethyl phosphonic acid in water by on-line anion-exchange solid-phase extraction followed by cation-exchange liquid chromatography and post-column derivatization.

An automated method based on the on-line coupling of anion-exchange solid-phase extraction (SPE) and cation-exchange liquid chromatography followed by post-column derivatization and fluorescence detection has been developed for the trace level determination of glyphosate and its primary conversion product aminomethyl phosphonic acid (AMPA) in water. PRP-X100 poly(styrene-divinylbenzene)-trimethylammonium anion-exchange cartridges (20 x 2 mm, 10 microm) were selected for the SPE of glyphosate and AMPA. The ionic compounds present in the samples strongly influenced the extraction of both analytes; however, when an on-line ion-exchange clean-up step was introduced before sample SPE, the problem was largely solved. By processing 100-ml samples detection limits better than 0.02 microg/l for glyphosate and 0.1 microg/l for AMPA were achieved in river water. Both analytes were unstable in solution and the approach of storing samples on the PRP-X100 SPE cartridges was evaluated for a period of 1 month under three different storage conditions (deep freeze, refrigeration and 20 degrees C).     

Determination of limiting ionic mobilities and dissociation constants of some local anaesthetics.

The limiting ionic mobilities and thermodynamic acid dissociation constants were calculated from isotachophoretic experiments for the local anaesthetics procaine, tetracaine, lidocaine, trimecaine, bupivacaine, cinchocaine, diperodone, diocaine, cocaine, psicaine-neu, tropacocaine, amylocaine, beta-eucaine and leucinocaine. The pH values at which the local anaesthetics with very similar limiting ionic mobilities can be isotachophoretically separated were determined from simulated mobility curves. The measuring apparatus employed a high-frequency contactless conductivity detector.     

Analyte and system eigenpeaks in nonaqueous capillary zone electrophoresis: theoretical description and experimental confirmation with methanol as solvent

A mathematical model developed for aqueous solutions and adapted to methanol as solvent was applied to predict the electromigration characteristics of analytes and background electrolytes in capillary zone electrophoresis. These characteristics are the effective mobility, and the tendency of the analyte to undergo peak-broadening due to electromigration dispersion. The input parameters for calculation like limiting mobilities and dissociation constants were experimentally determined or taken from the literature. By the aid of the model, the molar response for conductivity detection was calculated as well as the transfer ratio when indirect UV detection was used. They allow depicting the electropherogram by computer simulation. An additional important program output is the prediction of the occurrence of system- or eigenpeaks that mimic peaks of analytes or electroosmotic flow markers. The measured electropherograms were in agreement with those theoretically predicted. Deviations were attributed to ion pairing in methanolic solutions, which was not implemented in the model.     

Estimation of acidity constants,ionic mobilities and charges of antimicrobial peptides by capillary electrophoresis

Capillary electrophoresis (CE) was employed for the determination of thermodynamic acidity constants (pK_a) and actual ionic mobilities of polycationic antimicrobial peptides (AMPs). The effective electrophoretic mobilities of AMPs were measured by CE in a series of the background electrolytes within a wide pH range (2.00–12.25), at constant ionic strength (25 mM) and ambient temperature, using polybrene coated fused silica capillaries to suppress sorption of cationic AMPs to the capillary wall. Eventually, Haarhoff–Van der Linde peak fitting function was used for the determination of correct migration times of some AMPs peaks that were distorted by electromigration dispersion. The measured effective mobilities were corrected to 25°C. Mixed acidity constants, , and actual ionic mobilities, m_i, of AMPs were determined by the nonlinear regression analysis of pH dependence of their effective mobilities. The values were recalculated to thermodynamic pK_as using the Debye–Hückel theory. Thermodynamic pK_a of imidazolium group of histidine residues was found to be in the range 3.72–4.98, pK_a of α‐NH₃⁺ group was in the range 6.14–6.93, and pK_a of ε‐NH₃⁺ group of lysine spanned the interval 7.26–9.84, depending on the particular amino acid sequence of the AMPs. Actual ionic mobilities of AMPs with positive charges from one to six elementary units achieved values (9.8 – 36.5) × 10^?9 m²V^?1s^?1.     

Simple in‐house flow‐injection capillary electrophoresis with capacitively coupled contactless conductivity method for the determination of colistin

An in‐house flow‐injection capillary electrophoresis with capacitively coupled contactless conductivity detection method was developed for the direct measurement of colistin in pharmaceutical samples. The flow injection and capillary electrophoresis systems are connected by an acrylic interface. Capillary electrophoresis separation is achieved within 2 min using a background electrolyte solution of 5 mM 2‐morpholinoethanesulfonic acid and 5 mM histidine (pH 6). The flow‐injection section allows for convenient filling of the capillary and sample introduction without the use of a pressure/vacuum manifold. Capacitively coupled contactless conductivity detection is employed since colistin has no chromophore but is cationic at pH 6. Calibration curve is linear from 20 to 150 mg/L, with a correlation coefficient (r²) of 0.997. The limit of quantitation is 20 mg/L. The developed method provides precision, simplicity, and short analysis time.     

Isoelectric buffers, part 3: determination of pKa and pI values of diamino sulfate carrier ampholytes by indirect UV-detection capillary electrophoresis

Ampholytes with close pK(a) values (i.e., good carrier ampholytes (CAs)) are needed as buffers in pH-biased isoelectric trapping (IET) separations. The syntheses of two families of such good CAs were reported recently. Members of the family of diamino sulfate ampholytes (first series) had pI values in the 5.7 < pI < 9.0 range. Members of the family of quaternary ammonium dicarboxylic acid ampholytes (second series) had pI values in the pI < 4.3 range. To further characterize the diamino sulfate ampholytes, their effective mobilities were measured by indirect UV-absorbance detection capillary electrophoresis in a series of background electrolytes (BGEs) with different pH values. The pK(a) and limiting ionic mobility values of the CAs were obtained by fitting these mobility values, as a function of the pH and the ionic strength of the BGEs, to the theoretical mobility expression. These diamino sulfates complete the list of CAs suitable for IET separations.     

Formamide as solvent for capillary zone electrophoresis

A comprehensive investigation of a number of aspects when using formamide as background electrolyte solvent in capillary zone electrophoresis was presented. It included (i) the change of the ion mobility with ionic strength, (ii) the influence of the ionic strength on diffusion coefficients, and (iii) on the separation efficiency expressed by the maximum reachable plate numbers (when only longitudinal diffusion contributed to zone broadening), (iv) the effect of the solvent on pKa values (taken from the literature) of neutral and cation acids, (v) the establishment of the a pH scale in formamide by dissolving acids with known pKa values and their salts at defined proportion (thus circumventing the problem of calibrating the pH meter), (vi) the agreement between the experimentally derived and the theoretical dependence of the effective mobility on pH, (vii) the uptake of water of this hygroscopic solvent from the humidity of the environment and its consequence to the ion mobilities, pKa values, and the chemical stability of the solvent (e.g., hydrolysis), and finally (viii) the use of conductivity and indirect UV absorption to enable detection of analytes below the optical cutoff of formamide.     

Sensitive Method for Enantioseparation of Rivastigmine with Highly Sulfated Cyclodextrin as Chiral Selector by Capillary Electrophoresis

A sensitive method for enantioseparation of a basic drug rivastigmine and determination of its optical impurityby capillary electrophoresis with highly sulfated β-cyclodextrin(HS-β-CD)as the chiral selector is described.Ingeneral,enantioseparation of basic chiral compounds is carried out in acidic condition(pH 2.5)to prevent analytesfrom adsorption on the capillary wall.However,in the case of rivastigmine,the detection sensitivity was too limitedto determine the optical impurity of S-rivastigmine lower than 1% when buffer pH was 2.5.It was found that thedetection sensitivity was improved 1.6 times just by raising the buffer pH value from 2.5 to 5.8.The poor columnefficiency due to the adsorption of the analytes on the capillary wall was resolved by using dynamical coating of thecapillary wall with the linear polyacrylamide solution.The experirnental parameters such as the concentration ofHS-β-CD,buffer pH and buffer ionic strength were optimized,respectively.The method was validated in terms ofrepeatability,linearity,limit of detection(LOD)and limit of quantitation(LOQ).Using the present method,the op-tical purity of nonracemic rivastigmine with the enantiomeric excess(ee)value of 99.14% was determined.     

Hydrogen-bond effect and ion-pair association in the separation of neutral calix[4]pyrroles by nonaqueous capillary electrophoresis

A study on the migration behavior of four neutral macrocyclic compounds calix[4]pyrroles (C4Ps) by nonaqueous capillary electrophoresis (NACE) with tetrabutylammonium halide salts as background electrolyte (BGE) is described. Systematic studies were carried out with different BGE in acetonitrile (ACN) to elucidate the involved phenomena. The effect of BGE concentration on analytes effective mobilities mu eff,i was studied. Rough values of analytes absolute mobilities mu infinity,i were obtained by extrapolation of effective mobilities to zero ionic strength of BGE. Stokes radius of C4Ps in the form of C4PF(-) and C4PCl(-) was calculated. The complex constants of C4Ps with F(-) anion and Cl(-) anion and ion-pair association constants of each C4PF(-) and C4PCl(-) with tetrabutylammonium cations was evaluated and confronted. Hydrogen bonding effect is prerequisite in the separation; meanwhile ion-pair association which is intensified by steric hindrance effect plays an important role.