Characterization of polymer materials by scattering techniques,with applications to block copolymers

The application of six techniques—static and dynamic light scattering, small-angle neutron and X-ray scattering, neutron and X-ray reflectivity—to the characterization of polymer materials is summarized. Emphasis is placed on the similarities and differences among the various techniques, and on recent advances in experimental practice. Twelve examples from the recent literature are described, most of which concern block copolymers. A brief introduction to block copolymer properties is also provided.     

Comparative Study of Scattering and Osmotic Properties of Synthetic and Biopolymer Gels

Summary: The effect of monovalent/divalent cation exchange on the structure and osmotic properties of chemically cross-linked polyacrylate and DNA gels swollen in near physiological salt solutions has been investigated. Both systems exhibit a reversible volume phase transition in the presence of calcium ions. The small-angle neutron scattering spectra of these gels display qualitatively similar features. At low values of q surface scattering is observed, while in the intermediate q range the signal is characteristic of scattering from rod-like elements. At high values of q the scattering intensity is governed by the local (short-range) geometry of the polymer chains. The competition between monovalent and divalent cations has been studied by anomalous small-angle X-ray scattering (ASAXS). The ASAXS results reveal that the local concentration of the divalent counter-ions in the vicinity of the polymer chains significantly exceeds that of the monovalent counter-ions.     

Characterization of nanoporous low-k thin films by small-angle neutron scattering contrast variation

Small-angle neutron scattering contrast variation is applied to characterization of nanoporous low-dielectric constant (low-k) thin films. Films are exposed to saturated solvent vapor in air, whereby the pores fill with liquid by capillary condensation. The pores are filled with mixtures of hydrogen- and deuterium-containing solvents to vary the neutron contrast with the matrix (wall). The composition of the solvent mixture is systematically varied to identify a composition that minimizes the scattered intensity (contrast match point). From the contrast match point composition, film characteristics including matrix density and homogeneity are assessed. Four spin-on low-k materials including a methylsilsesquioxane, an organic polymer, a xerogel, and a hydrogensilsesquioxane are characterized by the new technique. Calculated matrix mass densities are compared to independent density measurements obtained by an established specular X-ray reflectivity technique. We find no evidence of "closed pores", defined here as pores inaccessible to the probe solvent, in any of the materials studied.     

Determining compositional profiles within conducting polymer films following reaction with vapor phase reagents

A combination of XPS, reflectance infrared spectroscopy, and neutron reflectivity measurements has been used to probe the spatial and global extents to which carboxylic acid motifs in electrodeposited conducting polymer films can be functionalized by reaction with vapor phase reagents (a carbodiimide together with trifluoroethanol) with the goal of controlling hydrophobicity. Across a range of polymer deposition and reaction temperatures, neutron reflectivity showed that, surprisingly, functionalization of the polymer matrix at depths >5-10 nm into the polymer film was always significantly lower than at the exposed surface. The most efficient functionalization was found to occur when a low-density polymer matrix was prepared by elution of motifs cleaved from the polymer by base hydrolysis. Finally, when trifluoroethanol functionalization was performed, the macroscopic property of hydrophobicity was related to the surface, internal microstructure, and composition of the reacted films as elucidated by the above combination of probes.     

Spectroscopic Characterization of a Lead–Lead Dioxide Automobile Battery

Here we combine small angle neutron scattering measurements (SANS) with X-ray diffraction analysis (XRD) and infrared spectroscopy (IR) measurements to obtain information about nanoparticles formed in a series of lead-lead dioxide samples mixed with various CuO concentrations. New vitreous systems with the xCuO???(100?x)[4PbO₂???Pb] composition where x?=?0, 30, and 70?mol% CuO were prepared by the melt-quenching method using CuO mixed in suitable proportion with the active electrodes of a disassembled car battery as the starting materials. The X-ray diffraction patterns permit the identification of the metallic Pb phase and the presence of oxidic nanoparticles of the lead and copper ions. By doping with higher CuO contents, the SANS curves have a concave shape indicating inhomogeneities and tendency of phase separation due to formation of nanoparticles of the lead and copper ions in recycled host matrix. The studied samples can be considered as polydispersed systems. The matrix is the solvent and the soluble phase is formed from the oxidic lead and/or copper particles with sizes smaller than 69?Å dispersed either inside the host matrix grains or between the host matrix grains. The formation of the nanoparticles in the host matrix and the knowledge of the type of nanoparticles have a decisive role in applications for the construction of essential components of the automobile batteries.     

Light,Small Angle Neutron and X-Ray Scattering from Gels

This paper gives two examples of experiments that demonstrate the power of small angle scattering techniques in the study of swollen polymer networks. First, it is shown how the partly ergodic character of these systems is directly detected by neutron spin echo experiments. The observed total field correlation function of the intensity scattered from a neutral gel allows the ergodic contribution to be directly distinguished from the non ergodic part, at values of transfer wave vector q that lie well beyond the range of dynamic light scattering. The results can be compared with those obtained at much lower q from visible light scattering. Second, a recent application of small angle X-ray (SAXS) and neutron (SANS) scattering is described for a polyelectrolyte molecule, DNA, in semi-dilute solutions under near-physiological conditions. For these observations, the divalent ion normally present, calcium, is replaced by an equivalent ion, strontium. The comparison between SANS and SAXS yields a quantitative picture of the cloud of divalent counter-ions around the central DNA core. At physiological conditions, the cloud is thinner than that predicted on the basis of the Debye screening length but thicker than if the counter-ions were condensed on the DNA chain.     

Structure of polymer and particle aggregates in hydrogel composites

Knowledge of the structure of a biomaterial is usually vital to control its function. This article provides a structural characterization of a hyaluronan scaffold that has demonstrated good biocompatibility and is used to induce bone regeneration. Hyaluronan hydrogels are appealing materials that can function as a matrix to incorporate both organic and inorganic substances to enhance tissue growth. Because of the intrinsic properties of this swollen matrix, one needs a very sensitive technique that can be applied in situ to determine the organization of the polymers in a gel. Small-angle neutron scattering is used to determine the characteristics of the inhomogeneous structure of the hydrogel both with and without added particles. The results are interpreted using models of structure with two length scales that are beyond the traditional picture of homogeneous gels. The observed structure and the dimensions can explain the previously reported rheological properties of gels containing different amount of polymers. Hydroxyapatite nanoparticles added to the gel are frozen in the gel matrix. We are able to determine the distribution and shape of these particles as they aggregate around the polymer chains. We have also concluded, in this case, that the particle structure is concentration independent. Information about the nanostructure for an applicable biomaterial guides the formulation, preparation, and use that should lead to further understanding of its exploitation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Orientation of platelets in multilayered nanocomposite polymer films

The orientation of platelets in micro-meter-thick polymer-clay nanocomposite films was investigated with small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), and wide-angle X-ray diffraction (WAXD). The films with various clay contents (15–60% by mass fraction) were prepared by a layer-by-layer approach from polymer-clay solutions that led to the formation of a high degree of orientation in both polymer and clay platelets. Shear-induced orientation of polymer-clay solutions is compared with the orientation of polymer-clay films. SANS, SAXS, and WAXD, with beam configurations in and perpendicular to the spread direction of the film, were used to determine the structure and orientation of platelets. In all films, the clay platelets oriented preferentially in the plane of the film. The observed differences in semidilute solutions, with clay surface normal parallel to the vorticity direction, versus bulk films and with clay surface normal parallel to the shear gradient direction at clay mass fractions of 40 and 60%, were attributed to the collapses of clay platelet during the drying process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3237–3248, 2003     

Influence of the surface chemistry on the structural and mechanical properties of silica‐polymer composites

Poly(vinyl alcohol) (PVA) composite films filled with nanometric, monodisperse, and spherical silica particles were prepared by the mixing of an aqueous PVA solution and SiO₂ colloidal suspension and the evaporation of the solvent. Adjusting the solution pH to 5 and 9 controlled the PVA‐SiO₂ interaction. Adsorption isotherms showed a higher PVA/surface affinity at a lower pH. This interaction influenced the composite structure and the particle distribution within the polymer matrix, which was investigated by small‐angle neutron scattering, electron microscopy, and swelling measurements. Most of the mechanical properties could be related to the composite structure, that is, the distribution of clusters within the polymer matrix. The progressive creation of a cluster network within the polymeric matrix as the silica volume fraction increased reduced the extensibility or swelling capacity of the composite. The effect was more acute at a higher pH, at which the surface interaction with PVA was weaker and promoted the interconnection between clusters. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3127–3138, 2003     

Formation of deprotected fuzzy blobs in chemically amplified resists

The requirement of nanometer dimensional control in photolithographic patterning underlies the future of emerging technologies, including next-generation semiconductors, nanofluids, photonics, and microelectromechanical systems. For chemically amplified resists, dimensional control is mediated by the diffusion and reaction of photogenerated acids within a polymer-based photoresist matrix. The complex nature of the combined processes of reaction and diffusion prohibit the routine measurement of this phenomenon. Using small-angle neutron scattering, we have measured the form of the diffusion–reaction path of a photogenerated acid within a model photoresist matrix with a labeled protection group on the polymer side group. During the deprotection reaction, changes in the scattering form factor result from the shape and form of the deprotected regions. The individual volumes or blobs of reacted material are diffuse, with a fuzzy boundary between the reacted and unreacted regions. The impact of these results on the pattern quality is also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3063–3069, 2004     

Nucleation, structure and lamellar morphology of isotactic polypropylene filled with polypropylene-grafted multiwalled carbon nanotubes

Polypropylene-based nanocomposites filled with polypropylene-grafted multiwalled carbon nanotubes (PP-g-MWNT) were compared to PP samples filled with pristine MWNT. The effect of such additives on the structure and morphology of the polymer matrix was studied by small angle X-ray scattering (SAXS), wide angle X-ray diffraction (WAXD), polarized light optical microscopy (PLOM) and differential scanning calorimetry (DSC). PP-g-MWNT allowed a more efficient and unhindered crystallization at a lamellar level, while MWNT disrupted the order of lamellar stacks, probably because of their tendency to aggregate. A common trend of tensile properties and lamellar morphology as a function of filler content was noted in the series filled with functionalized carbon nanotubes.     

Recent progress on polymer dynamics by neutron scattering: From simple polymers to complex materials

The recent (from 2010 onward) contributions of quasielastic neutron scattering techniques (time of flight, backscattering, and neutron spin echo) to the characterization and understanding of dynamical processes in soft materials based on polymers are analyzed. The selectivity provided by the combination of neutron scattering and isotopic—in particular, proton/deuterium—labeling allows the isolated study of chosen molecular groups and/or components in a system. This opportunity, together with the capability of neutrons to provide space/time resolution at the relevant length scales in soft matter, allows unraveling the nature of the large variety of molecular motions taking place in materials of increasing complexity. As a result, recent relevant works can be found dealing with dynamical process which associated characteristic lengths and nature are as diverse as, for example, phenyl motions in a glassy linear homopolymer like polystyrene and the chain dynamics of a polymer adsorbed on dispersed clay platelets. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Tuning the mechanical properties in model nanocomposites: Influence of the polymer‐filler interfacial interactions

This article presents a study of the polymer‐filler interfacial effects on filler dispersion and mechanical reinforcement in Polystyrene (PS)/silica nanocomposites by direct comparison of two model systems: ungrafted and PS‐grafted silica dispersed in PS matrix. The structure of nanoparticles has been investigated by combining small angle neutron scattering measurements and transmission electronic microscopic images. The mechanical properties were studied over a wide range of deformation by plate–plate rheology and uni‐axial stretching. At low silica volume fraction, the particles arrange, for both systems, in small finite size nonconnected aggregates and the materials exhibit a solid‐like behavior independent of the local polymer‐fillers interactions suggesting that reinforcement is dominated by additional long range effects. At high silica volume fraction, a continuous connected network is created leading to a fast increase of reinforcement whose amplitude is then directly dependent on the strength of the local particle–particle interactions and lower with grafting likely due to deformation of grafted polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and properties of a deuterated phenolic resin

A highly deuterated novolac‐type phenolic resin was prepared by polycondensation of deuterated phenol and formaldehyde using oxalic acid as an acid catalyst. The polycondensation of deuterated monomers and the formation of the highly deuterated phenolic resin were confirmed by the gel permeation chromatography, IR, and ¹H NMR analyses. With the exception of hydroxyl groups, the degree of deuteration was estimated to be more than 98%. The polymer conformation in THF solution was evaluated by the scaling exponent of the Mark–Houwink–Sakurada equation. The exponent of the deuterated phenolic resin is 0.26 in THF at 40 °C and is close to that of a nondeuterated phenolic resin, which suggests that phenolic resins behave like a compact sphere irrespective of deuteration. The curing behavior of the deuterated phenolic resin with hexamethylenetetramine was confirmed by differential scanning calorimetry analysis. The cured highly deuterated phenolic resin exhibits a lower incoherent neutron scattering background than that of the nondeuterated phenolic resin, which suggests that the former is suitable for matrix resins with low incoherent backgrounds for small‐angle neutron scattering studies of thermosetting resins. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Roughness correlation and interdiffusion in thin films of polymer chains

The surface morphology of thin bilayer polymer films on top of glass substrates was investigated. The bilayer consists of a blend film of protonated and deuterated polystyrene and an underlying deuterated polystyrene film. Choosing the thickness of the top film larger than 8 times and smaller than 2 times the radius of gyration of the chains enables the determination of film thickness and confinement effects. With diffuse neutron scattering at grazing incidence in the region of total external reflection, a depth sensitivity and a contrast even at the internal polymer–polymer interface was achieved. The underlying film is conformal to the substrate, and depending on the thickness of the top film two different types of roughness correlations are observed. Thin confined films nestle to the underlying polymer films, while the stiffness of thicker bulky films provides an independent morphology. In both cases, annealing above the glass-transition temperature yields an interdiffusion at the internal polymer–polymer interface, and the polymer–air surface remains essentially unchanged with respect to roughness correlations. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2862–2874, 1999     

Ultra-small-angle X-ray and neutron scattering study of colloidal dispersions

The ultra-small-angle X-ray and neutron scattering techniques are useful techniques for the investigation of colloidal systems. The very high small-angle resolution of these scattering techniques has provided important and novel information to elucidate the formation mechanism of colloidal crystals. The Bonse–Hart optical system is expected to become a standard tool for investigating mesoscopic structures.     

Similarities between polyelectrolyte gels and biopolymer solutions

Small angle neutron scattering (SANS) measurements and osmotic swelling pressure measurements are reported for polyelectrolyte gels and solutions under nearly physiological conditions. A synthetic polymer (sodium-polyacrylate) and three biopolymers (DNA, hyaluronic acid, and polyaspartic acid) are studied. The neutron scattering response of these anionic polyelectrolytes is closely similar, indicating that at larger length scales the organization of the polymer molecules is not significantly affected by the fine details of the molecular architecture (e.g., size and chemical structure of the monomer unit, type of polymer backbone). The results suggest that specific interactions between the polyelectrolyte chains and the surrounding monovalent cations are negligible. It is found that the osmotic compression modulus of these biopolymer solutions determined from the analysis of the SANS response decreases with increasing chain persistence length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3679–3686, 2006